EN ISO 16904:2016
|
Petroleum and natural gas industries - Design and testing of LNG marine transfer arms for conventional onshore terminals (ISO 16904:2016) |
MIL-DTL-16356 Revision E:2013
|
GAUGES, DIRECT READING, OBLONG GLASS |
API STD 541 : 2014
|
FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER |
API 676 : 2009 : R2015
|
POSITIVE DISPLACEMENT PUMPS - ROTARY |
MIL-P-24608 Revision A:1987
|
PIPE, FITTINGS, AND ADHESIVE KITS, GLASS-REINFORCED THERMOSETTING EPOXY RESIN FOR SHIPBOARD PIPING SYSTEMS |
MIL-B-2128 Revision D:1991
|
BURNERS, STEAM AND OIL PRESSURE, ATOMIZING |
API STD 602 : 2015+ERR 1 : 2016
|
GATE, GLOBE, AND CHECK VALVES FOR SIZES DN 100 (NPS 4) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
EN 16125:2015
|
LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase |
API 674 : 2010(R2016)
|
POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
API 526 RUSSIAN : 2009
|
FLANGED STEEL PRESSURE RELIEF VALVES |
API 685 : 2011
|
SEALLESS CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL, AND GAS INDUSTRY PROCESS SERVICE |
API 623 : 2013
|
STEEL GLOBE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS |
API 6F2 : 1999
|
TECHNICAL REPORT ON FIRE RESISTANCE IMPROVEMENTS FOR API FLANGES |
PIP VEEVJ001 : 2015
|
GASKET GUIDELINES |
API 600 CHINESE : 2015
|
STEEL GATE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS |
API 612 : 2014
|
PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES - STEAM TURBINES - SPECIAL-PURPOSE APPLICATIONS |
AWWA D100 : 2011
|
WELDED CARBON STEEL TANKS FOR WATER STORAGE |
AWWA C153/A21.53 : 2011
|
DUCTILE-IRON COMPACT FITTINGS |
MIL-DTL-17849 Revision F:2018
|
Strainers, Sediment, Pipeline, Duplex (with and without Magnet) |
NBR 15827 : 2014
|
INDUSTRIAL VALVES FOR INSTALLATIONS OF EXPLORATION, PRODUCTION, REFINING AND TRANSPORT OF PETROL PRODUCTS - REQUIREMENTS FOR DESIGN AND PROTOTYPE TEST |
MIL-S-16032 Revision M:1987
|
SWITCH & DETECTORS, SHIPBOARD ALARM SYSTEM |
MIL-P-29206 Revision A:1987
|
PIPE AND PIPE FITTINGS, GLASS FIBER REINFORCED PLASTIC, FOR LIQUID PETROLEUM LINES |
ASME B16.25 : 2017
|
BUTTWELDING ENDS |
EN ISO 17078-2:2007/AC:2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 2: FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
API 603 RUSSIAN : 2013
|
CORROSION-RESISTANT, BOLTED BONNET GATE VALVES - FLANGED AND BUTT-WELDING ENDS |
MIL-DTL-17813-8 Base Document:2009
|
EXPANSION JOINTS, PIPE, METALLIC, HINGED |
MIL-DTL-17813-6 Base Document:2009
|
EXPANSION JOINTS, PIPE, METALLIC, PRESSURE BALANCE |
ASME B73.3 : 2015
|
SPECIFICATION FOR SEALLESS HORIZONTAL END SUCTION CENTRIFUGAL PUMPS FOR CHEMICAL PROCESS |
MIL E 17813 : F
|
EXPANSION JOINTS, PIPE, METALLIC BELLOWS |
NORSOK L 005:2013
|
COMPACT FLANGED CONNECTIONS |
EN ISO 12212:2012
|
Petroleum, petrochemical and natural gas industries - Hairpin-type heat exchangers (ISO 12212:2012) |
MIL V 13803 : E
|
VALVE, GATE, DOUBLE DISC, CAST IRON OR STEEL |
MIL-DTL-17813-7 Base Document:2009
|
EXPANSION JOINTS, PIPE, METALLIC, UNIVERSAL |
EN ISO 13628-11:2008/AC:2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 11: FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
MIL-DTL-24696 Revision C:2008
|
GASKET, SHEET, NON-ASBESTOS |
API 602 RUSSIAN : 2009
|
STEEL GATE, GLOBE, AND CHECK VALVES FOR SIZES NPS 4 (DN 100) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
MSS SP 131 : 2017
|
METALLIC MANUALLY OPERATED GAS DISTRIBUTION VALVES |
MIL-PRF-13803 Revision F:1996
|
VALVE, GATE - DOUBLE-DISK, CAST-IRON OR STEEL |
API 6DSS : 2017-08
|
SPECIFICATION FOR SUBSEA PIPELINE VALVES |
MSS SP 65 : 2012
|
HIGH PRESSURE CHEMICAL INDUSTRY FLANGES AND THREADED STUBS FOR USE WITH LENS GASKETS |
NACE RP 02 86 : 2002
|
ELECTRICAL ISOLATION OF CATHODICALLY PROTECTED PIPELINES |
BS EN 60534-7:2010
|
Industrial-process control valves Control valve data sheet |
API 616 : 2011
|
GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
AWWA C751 : 2016
|
MAGNETIC INDUCTIVE FLOWMETERS |
ANSI Z223.1 : 2018
|
NATIONAL FUEL GAS CODE |
API 619 : 2010
|
ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
API 19G4 : 2011
|
PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT |
API 608 RUSSIAN : 2012
|
METAL BALL VALVES - FLANGED, THREADED AND WELDING ENDS |
API 672 : 2004
|
PACKAGED, INTEGRALLY GEARED CENTRIFUGAL AIR COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
MIL-PRF-32187 Revision A:2017
|
Gasket, Hybrid, Flat and Raised Face Flange, Fire Resistant, Shipboard Use |
MIL-PRF-32306 Base Document:2008
|
HOSE ASSEMBLY, PREFORMED FLEXIBLE, VIBRATION AND MOTION ISOLATION |
MIL-P-52327 Revision C:1990
|
PUMPS, CENTRIFUGAL, ELECTRIC-MOTOR-DRIVEN, POSITIVE PRIME, PETROLEUM PRODUCTS, AIRFIELD DEFUELLING AND RECEIVING |
API 613:2003
|
SPECIAL PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
API 677 : 2006 : R2010
|
GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
API 650 CHINESE : 2013
|
WELDED TANKS FOR OIL STORAGE |
WW-P-521 Revision G:1977
|
PIPE FITTINGS, FLANGE FITTINGS, AND FLANGES, STEEL AND MALLEABLE IRON (THREADED AND BUTT WELDING) CLASS 150 |
NORSOK D 007:2013
|
WELL TESTING SYSTEM |
CSA C22.2 No. 139 : 2013 : R2018
|
ELECTRICALLY OPERATED VALVES |
API 553 : 2012
|
REFINERY VALVES AND ACCESSORIES FOR CONTROL AND SAFETY INSTRUMENTED SYSTEMS |
MIL-DTL-17813-9 Base Document:2009
|
EXPANSION JOINTS, PIPE, METALLIC, GIMBAL |
EEMUA 193 : 2013
|
MANAGING COMPETENCE ASSURANCE FOR PERSONNEL UNDERTAKING IN-SERVICE INSPECTION OF PRESSURE EQUIPMENT |
AWWA C512 : 2015
|
AIR-RELEASE, AIR/VACUUM, AND COMBINATION AIR VALVES FOR WATER AND WASTEWATER SERVICE |
EN ISO 20519:2017
|
Ships and marine technology - Specification for bunkering of liquefied natural gas fuelled vessels (ISO 20519:2017) |
ASME AG-1 : 2019
|
CODE ON NUCLEAR AIR AND GAS TREATMENT |
ASME B16.34 : 2017
|
VALVES - FLANGED, THREADED, AND WELDING END |
MSS SP 106 : 2012
|
CAST COPPER ALLOY FLANGES AND FLANGED FITTINGS: CLASS 125, 150, AND 300 |
MIL V 18030 : E
|
VALVE, CONTROL, AIR DIAPHRAGM OPERATED (COMPLETE WITH INSTRUMENTATION |
API SPEC 12D : 2017
|
SPECIFICATION FOR FIELD-WELDED TANKS FOR STORAGE OF PRODUCTION LIQUIDS |
API 2610:2005
|
DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES |
API 674 : 2010
|
POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
MIL C 15730 : M
|
COOLER, FLUID, NAVAL SHIPBOARD, LUBRICATING OIL, HYDRAULIC OIL, AND FRESH WATER |
ASME B16.42 : 2016
|
DUCTILE IRON PIPE FLANGES AND FLANGED FITTINGS - CLASSES 150 AND 300 |
MSS SP 25 : 2013
|
STANDARD MARKING SYSTEM FOR VALVES, FITTINGS, FLANGES, AND UNIONS |
MIL-PRF-15618 Revision H:2006
|
FILTER-SEPARATOR, FLUID, PRESSURE, AVIATION AND DISTILLATE FUEL, NAVAL SHIPBOARD |
CSA C22.2 No. 139 : 2013
|
ELECTRICALLY OPERATED VALVES |
EEMUA 151 : 1987
|
LIQUID RING VACUUM PUMPS AND COMPRESSORS |
EN 1759-1:2004
|
Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24 |
EN 14870-3:2006
|
Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 3: Flanges (ISO 15590-3:2004, modified) |
MIL-DTL-20065 Revision E:2016
|
VALVES, ANGLE, PRESSURE RELIEF, NAVAL SHIPBOARD, FOR STEAM SERVICE |
NACE SP 02 86 : 2007
|
ELECTRICAL ISOLATION OF CATHODICALLY PROTECTED PIPELINES |
API TR 934-G : 2016
|
DESIGN, FABRICATION, OPERATIONAL EFFECTS, INSPECTION, ASSESSMENT, AND REPAIR OF COKE DRUMS AND PERIPHERAL COMPONENTS IN DELAYED COKING UNITS |
API 611 : 2008
|
GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
EN ISO 13628-1:2005/A1:2010
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS |
API 577 : 2013
|
WELDING PROCESSES, INSPECTION, AND METALLURGY |
MIL V 18500 : B
|
VALVE, REDUCING, COMPRESSED GAS |
NORSOK I 001 : 2010
|
FIELD INSTRUMENTATION |
MIL S 13789 : D
|
STRAINER, SEDIMENT, PIPELINE, BASKET TYPE |
MSS SP 72 : 2010
|
BALL VALVES WITH FLANGED OR BUTT-WELDING ENDS FOR GENERAL SERVICE |
MSS SP 92 : 2012
|
MSS VALVE USER GUIDE |
MSS SP 51 : 2012
|
CLASS 150LW CORROSION RESISTANT FLANGES AND CAST FLANGED FITTINGS |
API 682 : 2014
|
PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS |
API 601 : 1988
|
METALLIC GASKETS FOR RAISED-FACE PIPE FLANGES AND FLANGED CONNECTIONS (DOUBLE-JACKETED CORRUGATED AND SPIRAL WOUND) |
API 11P : 1989
|
SPECIFICATION FOR PACKAGED RECIPROCATING COMPRESSORS FOR OIL AND GAS PRODUCTION SERVICES |
MIL-V-10386 Revision E:1977
|
SWING, CAST-IRON AND STEEL |
API 591 : 2014
|
PROCESS VALVE QUALIFICATION PROCEDURE |
MSS SP 148 : 2014
|
LOW PRESSURE FLANGED OR LUGGED CARBON STEEL AND IRON OR DUCTILE IRON, CAST OR FABRICATED, BONNETLESS, KNIFE GATE VALVES WITHOUT LINERS |
MSS SP 118 : 2007
|
COMPACT STEEL GLOBE & CHECK VALVES - FLANGED, FLANGELESS, THREADED & WELDING ENDS (CHEMICAL & PETROLEUM REFINERY SERVICE) |
API STD 600 : 2015
|
STEEL GATE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS |
API 677 : 2006 : R2016
|
GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
API 622 : 2011
|
TYPE TESTING OF PROCESS VALVE PACKING FOR FUGITIVE EMISSIONS |
API 682 CHINESE : 2014
|
PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS |
PIP VESLP001 : 2012
|
LOW-PRESSURE, WELDED VESSEL SPECIFICATION |
API 574 CHINESE : 2009
|
INSPECTION PRACTICES FOR PIPING SYSTEM COMPONENTS |
API 674 : 2010 : INC : ERR 1 : 2015 : R2016
|
POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
API 677 :2006
|
GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
EN ISO 10434:2004
|
Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries (ISO 10434:2004) |
EN ISO 13709:2009
|
Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709:2009) |
AWWA C520 : 2014
|
KNIFE GATE VALVES, SIZES 2 IN. (50 MM) THROUGH 96 IN. (2,400 MM) |
EN 60534-7:2010
|
Industrial-process control valves - Part 7: Control valve data sheet |
MIL-DTL-32408 Base Document:2012
|
INTEGRAL MOTOR PUMP (IMP) |
MIL-S-24771 Base Document:1992
|
SENSOR, LEVEL, FLOAT TYPE, SHIPBOARD SEWAGE SYSTEMS |
UFC 4-826-10 : 2002
|
UNIFIED FACILITIES CRITERIA - DESIGN: REFRIGERATION SYSTEMS FOR COLD STORAGE |
MIL-F-18180 Revision D:1986
|
FLANGES & FLANGED FITTINGS, PIPE, STEEL, CLASSES 150, 300, 400, 600, 900, 1500 & 2500, GENERAL SPECIFICATION FOR |
MIL-DTL-19772 Revision C:2017
|
VALVES, TEMPERATURE REGULATING, AUTOMATIC, NAVAL SHIPBOARD |
API 526 : 2017
|
FLANGED STEEL PRESSURE-RELIEF VALVES |
API 6D :2015
|
SPECIFICATION FOR PIPELINE AND PIPING VALVES |
MIL-P-28584 Revision B:1989
|
PIPE AND PIPE FITTINGS, GLASS FIBER REINFORCED PLASTIC, FOR CONDENSATE RETURN LINES |
UNE-EN ISO 16904:2016
|
Petroleum and natural gas industries - Design and testing of LNG marine transfer arms for conventional onshore terminals (ISO 16904:2016) |
MIL-DTL-17813-5 Base Document:2009
|
EXPANSION JOINTS, PIPE, METALLIC, SINGLE BELLOWS, FABRICATED |
MIL-DTL-17813-2 Base Document:2009
|
EXPANSION JOINTS, PIPE, METALLIC, SINGLE BELLOWS, CORRUGATED, REINFORCED |
PIP VESAC001 : 2016
|
AIR-COOLED HEAT EXCHANGER SPECIFICATION (SUPPLEMENT TO API STD 661, 7TH EDITION) |
MIL-G-24717 Base Document:1989
|
GASKET, SHEET, REFRIGERATION, NON-ASBESTOS |
API 594 : 2017
|
CHECK VALVES: FLANGED, LUG, WAFER, AND BUTT-WELDING |
MIL G 16356 : D
|
GAGE, BOILER WATER, DIRECT READING |
MIL-F-27630 Revision D:1970
|
FILTER-SEPARATOR, LIQUID FUEL FFU-2/E |
MIL-PRF-13789 Revision E:1999
|
STRAINERS, SEDIMENT: PIPELINE, BASKET TYPE |
API std 602 : 2015
|
GATE, GLOBE, AND CHECK VALVES FOR SIZES DN 100 (NPS 4) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
MIL-DTL-18436 Revision G:2017
|
Valves, Check - Bronze -and Steel-Body |
API 574 : 2016
|
INSPECTION PRACTICES FOR PIPING SYSTEM COMPONENTS |
API 674 : 2010 : ERR 2 : 2015
|
POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
MSS SP 42 : 2013
|
CORROSION-RESISTANT GATE, GLOBE, ANGLE, AND CHECK VALVES WITH FLANGED AND BUTT WELD ENDS (CLASSES 150, 300, & 600) |
ANSI/AWWA C115/A21.15 : 2011
|
FLANGED DUCTILE-IRON PIPE WITH DUCTILE-IRON OR GRAY-IRON THREADED FLANGES |
AWWA C111/A21.11 : 2017
|
RUBBER-GASKET JOINTS FOR DUCTILE-IRON PRESSURE PIPE AND FITTINGS |
API 674 : 2010 : ERR 1 : 2014
|
POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
EN ISO 10437:2003
|
Petroleum, petrochemical and natural gas industries - Steam turbines - Special-purpose applications (ISO 10437:2003) |
EEMUA 182 : 2004
|
SPECIFICATION FOR INTEGRAL BLOCK AND BLEED VALVE MANIFOLDS FOR DIRECT CONNECTION TO PIPEWORK |
EN ISO 14723:2009
|
Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves (ISO 14723:2009) |
EN 13942:2009/AC:2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES |
API 590 : 1985
|
STEEL LINE BLANKS |
API 591 RUSSIAN : 2008
|
PROCESS VALVE QUALIFICATION PROCEDURE |
API 1111 : 2015
|
DESIGN, CONSTRUCTION, OPERATION, AND MAINTENANCE OF OFFSHORE HYDROCARBON PIPELINES (LIMIT STATE DESIGN) |
MSS SP 126 : 2013
|
IN-LINE, SPRING-ASSISTED, CENTER-GUIDED CHECK VALVES (CARBON, ALLOY STEEL, STAINLESS STEEL, & NICKEL ALLOYS) |
SAE AIR 4782 : 2018
|
HYDRANT VALVE AND COUPLER HISTORICAL BACKGROUND |
API 660 : 2015
|
SHELL-AND-TUBE HEAT EXCHANGERS |
API 551 : 2016
|
PROCESS MEASUREMENT |
NFPA 54 : 2018
|
NATIONAL FUEL GAS CODE |
WW-T-696 Revision E:1984
|
TRAPS, STEAM |
SAE J 2270 : 2016
|
SHIP SYSTEMS AND EQUIPMENT - THREADED FASTENERS - INSPECTION, TEST, AND INSTALLATION GUIDANCE |
API 610 : 2010
|
CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
API 609 CHINESE : 2009
|
BUTTERFLY VALVES: DOUBLE-FLANGED, LUG- AND WAFER-TYPE |
EN ISO 21049:2004
|
Pumps - Shaft sealing systems for centrifugal and rotary pumps (ISO 21049:2004) |
MSS SP 146 : 2014
|
HIGH PRESSURE, LUG- AND WAFER-TYPE, IRON AND DUCTILE IRON KNIFE GATE VALVES |
MIL V 20065 : D
|
VALVE, ANGLE, PRESSURE RELIEF, NAVAL SHIPBOARD, FOR STEAM SERVICE |
ASME AG 1 : 2012
|
CODE ON NUCLEAR AIR AND GAS TREATMENT |
GG-T-321 Revision D:1977
|
THERMOMETERS, SELF-INDICATING, LIQUID-IN-GLASS FOR MACHINERY AND PIPING SYSTEMS |
API 609 : 2016
|
BUTTERFLY VALVES: DOUBLE-FLANGED, LUG- AND WAFER-TYPE |
API 537 : 2017
|
FLARE DETAILS FOR PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES |
EN ISO 25457:2008
|
Petroleum, petrochemical and natural gas industries - Flare details for general refinery and petrochemical service (ISO 25457:2008) |
A-A-60001 Revision A:2013
|
Traps, Steam |
BS EN 14870-3:2006
|
Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems Flanges |
API 611 : 2008 : R2014
|
GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
EN ISO 27509:2012/AC:2013
|
PETROLEUM AND NATURAL GAS INDUSTRIES - COMPACT FLANGED CONNECTIONS WITH 9 SEAL RING (ISO 27509:2012/COR 1:2013) |
MIL-PRF-32307 Revision A:2017
|
VALVE, QUARTER TURN, TRIPLE-OFFSET, TORQUE SEATED, SHIPBOARD USE |
API 2610 : 2005 : R2010
|
DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES |
BS ISO 8277:2013
|
Ships and marine technology. Pipework and machinery. Information transfer |
API 618 : 2007 : R2016
|
RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
API 537 CHINESE : 2008
|
FLARE DETAILS FOR GENERAL REFINERY AND PETROCHEMICAL SERVICE |
CSA 6.5 : 2015
|
AUTOMATIC VALVES FOR GAS APPLIANCES |
MIL-P-17552 Revision F:1991
|
PUMP UNITS, CENTRIFUGAL, WATER, HORIZONTAL, GENERAL SERVICE AND BOILER FEED, ELECTRIC MOTOR OR STEAM TURBINE DRIVEN |
EN ISO 13703:2000/AC:2007
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND INSTALLATION OF PIPING SYSTEMS ON OFFSHORE PRODUCTION PLATFORMS |
MIL-P-10388 Revision H:1990
|
PIPE FITTING, ONE OR MORE ENDS GROOVED |
MIL-DTL-17813-3 Base Document:2009
|
EXPANSION JOINTS, PIPE, METALLIC, DOUBLE BELLOWS, CORRUGATED, UNREINFORCED |
ASME B16.9 : 2012
|
FACTORY-MADE WROUGHT BUTTWELDING FITTINGS |
EN ISO 17078-4:2010
|
Petroleum and natural gas industries - Drilling and production equipment - Part 4: Practices for side-pocket mandrels and related equipment (ISO 17078-4:2010) |
ASME PTB 2 : 2009
|
GUIDE TO LIFE CYCLE MANAGEMENT OF PRESSURE EQUIPMENT INTEGRITY |
MIL-STD-777 Revision F:2012
|
SCHEDULE OF PIPING, VALVES, FITTINGS, AND ASSOCIATED PIPING COMPONENTS FOR NAVAL SURFACE SHIPS |
API 15LE : 2008 : R2013
|
SPECIFICATION FOR POLYETHYLENE LINE PIPE (PE) |
API SPEC 12P : 2016
|
SPECIFICATION FOR FIBERGLASS REINFORCED PLASTIC TANKS |
MIL-R-24414 Revision D:1991
|
REEL, HOSE, FIRE FIGHTING, MANUALLY OPERATED |
SAE J 2295 : 2016
|
FASTENER PART STANDARD - CAP SCREWS, HEX, HEAVY HEX AND HEAVY HEX STRUCTURAL BOLTS, AND HEX NUTS (INCH DIMENSIONED) |
NFPA 11 : 2016
|
LOW-, MEDIUM-, AND HIGH-EXPANSION FOAM |
EN 14161:2011+A1:2015
|
Petroleum and natural gas industries - Pipeline transportation systems (ISO 13623:2009 modified) |
EN 13942:2009
|
Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:2007 modified) |
PIP VECV1001 : 2017
|
DESIGN CRITERIA AND PURCHASING REQUIREMENTS FOR VESSELS ASME CODE SECTION 8, DIVISIONS 1 AND 2 |
MIL H 17505 : E
|
HOSE AND HOSE ASSEMBLY, RUBBER, OIL AND GASOLINE, SUCTION AND DISCHARGE |
EEMUA 211 : 2016
|
GUIDANCE ON THE SPECIFICATION OF PRESSURE VESSELS |
MIL-DTL-17813-4 Base Document:2009
|
EXPANSION JOINTS, PIPE, METALLIC, CORRUGATED BELLOWS, EXTERNALLY PRESSURIZED |
API RP 17B : 2014
|
RECOMMENDED PRACTICE FOR FLEXIBLE PIPE |
API TR 17TR10 : 2015
|
SUBSEA UMBILICAL TERMINATION (SUT) DESIGN RECOMMENDATIONS |
API 599 : 2013
|
METAL PLUG VALVES - FLANGED, THREADED, AND WELDING ENDS |
API 681 : 1996
|
LIQUID RING VACUUM PUMPS AND COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
STANAG 3756 : 2002
|
FACILITIES AND EQUIPMENT FOR RECEIPT AND DELIVERY OF AVIATION KEROSENE AND DIESEL FUELS |
API 19G2 : 2010
|
FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
API 340 : 1997
|
LIQUID RELEASE PREVENTION AND DETECTION MEASURES FOR ABOVEGROUND STORAGE FACILITIES |
AWWA C207 : 2013
|
STEEL PIPE FLANGES FOR WATERWORKS SERVICE, SIZES 4 IN. THROUGH 144 IN. (100 MM THROUGH 3,600 MM) |
EN ISO 17292:2015
|
METAL BALL VALVES FOR PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES (ISO 17292:2015) |
API 751 : 2013
|
SAFE OPERATION OF HYDROFLUORIC ACID ALKYLATION UNITS |
NORSOK M 630 : REV 6
|
MATERIAL DATA SHEETS AND ELEMENT DATA SHEETS FOR PIPING |
BS ISO 18647:2017
|
Petroleum and natural gas industries. Modular drilling rigs for offshore fixed platforms |
API 608 : 2012
|
METAL BALL VALVES - FLANGED, THREADED, AND WELDING ENDS |
API 681 : 1996 : R2010
|
LIQUID RING VACUUM PUMPS AND COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
API 676 CHINESE : 2009
|
POSITIVE DISPLACEMENT PUMPS - ROTARY |
API STD 612:2020
|
Petroleum, Petrochemical, and Natural Gas Industries - Steam Turbines - Special-purpose Applications |
API 620 : 2013
|
DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
API 673 : 2014
|
CENTRIFUGAL FANS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
API 663 : 2014
|
HAIRPIN-TYPE HEAT EXCHANGERS |
API RP 14E : 1991
|
RECOMMENDED PRACTICE FOR DESIGN AND INSTALLATION OF OFFSHORE PRODUCTION PLATFORM PIPING SYSTEMS |
API STD 676 : 2009
|
POSITIVE DISPLACEMENT PUMPS - ROTARY |
MIL-G-24745 Base Document:1990
|
GOVERNORS, STEAM DRIVEN PUMP, PRESSURE REGULATING, NAVAL SHIPBOARD, 600 POUNDS PER SQUARE INCH STEAM SERVICE |
EN ISO 13710:2004
|
Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps (ISO 13710:2004) |
DEFSTAN 02-357(PT4)/1(2010) : 2010
|
REQUIREMENTS FOR GASEOUS FIREFIGHTING SYSTEMS FOR MAIN AND AUXILIARY MACHINERY SPACES ON SURFACE SHIPS - PART 4: GENERAL REQUIREMENTS FOR INERT GAS SYSTEMS INCLUDING ELECTRIC/ELECTRONIC SPACES |
EN ISO 10439-1:2015
|
Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 1: General requirements (ISO 10439-1:2015) |
NFPA 14 : 2016
|
INSTALLATION OF STANDPIPE AND HOSE SYSTEMS |
NFPA 15 : 2017
|
WATER SPRAY FIXED SYSTEMS FOR FIRE PROTECTION |
MIL-B-1947 Revision A:1960
|
BLOWER, SOOT (SHIPBOARD USE) |
EN ISO 16812:2007
|
Petroleum, petrochemical and natural gas industries - Shell-and-tube heat exchangers (ISO 16812:2007) |
API 6DSS CHINESE : 2009
|
SPECIFICATION FOR SUBSEA PIPELINE VALVES |
MSS SP 9 : 2013
|
SPOT FACING FOR BRONZE, IRON AND STEEL FLANGES |
API SPEC 15HR : 2016
|
HIGH-PRESSURE FIBERGLASS LINE PIPE |
API 546 : 2008
|
BRUSHLESS SYNCHRONOUS MACHINES - 500 KVA AND LARGER |
API 12F : 2008
|
SPECIFICATION FOR SHOP WELDED TANKS FOR STORAGE OF PRODUCTION LIQUIDS |
MIL-G-21032 Revision D:1972
|
GASKET, METALLIC ASBESTOS, SPIRAL WOUND (FORASA COMMERCIAL) SHOW 115 5 |
MIL-E-17814 Revision F:1992
|
EXPANSION JOINTS, PIPE, SLIP-TYPE PACKED |
EEMUA 234 : 2016
|
90/10 COPPER NICKEL ALLOY PIPING FOR OFFSHORE APPLICATIONS (SPECIFICATION) |
API TR 17TR9 : 2017
|
UMBILICAL TERMINATION ASSEMBLY (UTA) SELECTION AND SIZING RECOMMENDATIONS |
API 617 : 2014
|
AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS |
API 618 : 2007
|
RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
EN ISO 10438-1:2007
|
Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1: General requirements (ISO 10438-1:2007) |
MIL-DTL-17505 Revision G:2014
|
Hose and Hose Assembly, Rubber, Oil and Gasoline, Suction and Discharge |
MIL S 21427 : B
|
STRAINER, ASSEMBLIES, MAIN STREAM, HIGH PRESSURE (SIZES 4 INCHES AND ABOVE) |
API 603 : 2013
|
CORROSION-RESISTANT, BOLTED BONNET GATE VALVES - FLANGED AND BUTT-WELDING ENDS |
API 614 : 2008
|
LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES |
API 577 CHINESE : 2013
|
WELDING PROCESSES, INSPECTION AND METALLURGY |
API 12F CHINESE : 2008
|
SPECIFICATION FOR SHOP WELDED TANKS FOR STORAGE OF PRODUCTION LIQUIDS |
API 12D CHINESE : 2008
|
SPECIFICATION FOR FIELD WELDED TANKS FOR STORAGE OF PRODUCTION LIQUIDS |
API 594 RUSSIAN : 2004
|
CHECK VALVES: FLANGED, LUG, WAFER AND BUTT-WELDING |
API 675 : 2012
|
POSITIVE DISPLACEMENT PUMPS - CONTROLLED VOLUME FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
EN ISO 23553-1:2014
|
Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014) |
API 15LE : 2008(R2018)
|
SPECIFICATION FOR POLYETHYLENE LINE PIPE (PE) |
API 621 RUSSIAN : 2010
|
PIPELINE VALVES - RECONDITIONING OF METALLIC GATE, GLOBE, AND CHECK VALVES |
MIL-V-24740 Base Document:1990
|
VALVE, SAFETY, BOILER, REMOTE PILOT OPERATED, FOR SHIPBOARD USE |
API 14E : 1991 : R2013
|
RECOMMENDED PRACTICE FOR DESIGN AND INSTALLATION OF OFFSHORE PRODUCTION PLATFORM PIPING SYSTEMS |
MIL-DTL-17813-1 Base Document:2009
|
EXPANSION JOINTS, PIPE, METALLIC, SINGLE BELLOWS, CORRUGATED, UNREINFORCED |
API 620 CHINESE : 2013
|
DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
NACE 5A171 : 2007
|
MATERIALS FOR STORING AND HANDLING COMMERCIAL GRADES OF AQUEOUS HYDROFLUORIC ACID AND ANHYDROUS HYDROGEN FLUORIDE |
MIL G 24696 : B
|
GASKET, SHEET, NON-ASBESTOS |
UNI EN ISO 23553-1 : 2014
|
SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES |
ANSI/AWWA D103 : 2009
|
FACTORY-COATED BOLTED CARBON STEEL TANKS FOR WATER STORAGE |
MIL-DTL-18030 Revision F:2018
|
Valves, Control, Air-Diaphragm-Operated (Complete with Pneumatic Instrumentation) |
ENA TS 56-1 : ISSUE 2 1989
|
FERRITIC STEEL VALVE CASTING |
EN ISO 20848-3:2008
|
Packaging - Plastics drums - Part 3: Plug/bung closure systems for plastics drums with a nominal capacity of 113,6 l to 220 l (ISO 20848-3:2006) |
EN ISO 10440-1:2007
|
Petroleum, petrochemical and natural gas industries - Rotary-type positive-displacement compressors - Part 1: Process compressors (ISO 10440-1:2007) |
ASME B16.48 : 2015
|
LINE BLANKS |
API 537:2017+ADD 1:2020
|
FLARE DETAILS FOR PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES |
API 605 : 4ED 88
|
LARGE-DIAMETER CARBON STEEL FLANGES (NOMINAL PIPE SIZES 26 THROUGH 60; CLASSES 75, 150, 300, 400, 600 AND 900) |
API 599 RUSSIAN : 2013
|
METAL PLUG VALVES - FLANGED, THREADED AND WELDING ENDS |
UNI EN 13942 : 2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES |
MIL V 18436 : F
|
VALVES, CHECK, BRONZE, CAST IRON, AND STEEL BODY |
MIL-DTL-17813 Revision H:2009
|
Expansion Joints, Pipe, Metallic Bellows, General Specification for |
MSS SP 141 : 2012
|
MULTI-TURN AND CHECK VALVE MODIFICATIONS |
ANSI/AWWA D120 : 2009
|
THERMOSETTING FIBERGLASS-REINFORCED PLASTIC TANKS |
API 64 : 2017-08
|
DIVERTER EQUIPMENT SYSTEMS |
MIL-DTL-24299 Revision B:2017
|
HEATERS, LUBRICATING OIL AND FUEL, ELECTRIC, NAVAL SHIPBOARD |
I.S. EN ISO 25457:2009
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - FLARE DETAILS FOR GENERAL REFINERY AND PETROCHEMICAL SERVICE |
ICC IMC Code and Commentary : 2015
|
IMC® Code and Commentary |
ASTM F 1173 : 2001 : R2006
|
Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications |
ASTM F 1985 : 1999
|
Standard Specification for Pneumatic-Operated, Globe-Syle, Control Valves |
DIN EN ISO 17292:2016-05
|
METAL BALL VALVES FOR PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES (ISO 17292:2015) |
ASTM F 1172 : 1988 : R2010
|
Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type |
ASTM F 1567 : 1994 : R2013
|
Standard Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers |
ASTM F 1030 : 1986 : R2008
|
Standard Practice for Selection of Valve Operators |
ISO 3977-3:2004
|
Gas turbines — Procurement — Part 3: Design requirements |
ASTM F 1123 : 1987 : R2004
|
Standard Specification for Non-Metallic Expansion Joints |
ANSI NGV4.8 : 2012 : R2016
|
STANDARD FOR NATURAL GAS VEHICLE FUELING STATION RECIPROCATING COMPRESSOR GUIDELINES |
ASTM F 1271 : 1990 : R2001
|
Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications |
ISO 13628-1:2005
|
Petroleum and natural gas industries — Design and operation of subsea production systems — Part 1: General requirements and recommendations |
ISO 7005-1:2011
|
Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems |
ISO 15761:2002
|
Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries |
ASTM F 1123 : 1987 : R1998
|
Standard Specification for Non-Metallic Expansion Joints |
ASTM F 1565 : 2000 : R2019
|
Standard Specification for Pressure-Reducing Valves for Steam Service |
ASTM F 1271 : 1990 : R2018
|
Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications |
EN 12516-1:2014
|
Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells |
ASTM F 1020 : 1986 : R2006
|
Standard Specification for Line-Blind Valves for Marine Applications |
ISO 13628-11:2007
|
Petroleum and natural gas industries — Design and operation of subsea production systems — Part 11: Flexible pipe systems for subsea and marine applications |
PIP PLSC0021 : 2017
|
PRESSURE TESTING OF ASME B31.8 METALLIC PIPING |
ISO 17292:2015
|
Metal ball valves for petroleum, petrochemical and allied industries |
ASTM F 1386 : 1992 : R2010
|
Standard Guide for Construction of a Sounding Tube and Striker Plate for Tank Sounding |
ASTM D 4097 : 2001 : R2010
|
Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks |
ASTM F 1201 : 1988 : R2010
|
Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F |
ASTM F 1201 : 1988 : R2004
|
Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F |
ASTM F 1271 : 1990 : R2012
|
Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications |
ASTM F 1567 : 1994 : R2001
|
Standard Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers |
ASTM F 2798 : 2009
|
Standard Specification for Sealless Lube Oil Pump with Oil Through Motor for Marine Applications |
ASTM F 599 : 1995
|
Standard Specification for Poly(Vinylidene Chloride) (PVDC) Plastic-Lined Ferrous Metal Pipe and Fittings (Withdrawn 2004) |
ASTM F 1567 : 1994
|
Standard Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers |
ASTM F 1200 : 1988 : R2004
|
Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F) |
ASTM F 2015 : 2000
|
Standard Specification for Lap Joint Flange Pipe End Applications |
ASTM F 1172 : 1988 : R1998
|
Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type |
ASTM F 682 : 1982 : REV A : R2004
|
Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings |
ASTM F 2015 : 2000 : R2006
|
Standard Specification for Lap Joint Flange Pipe End Applications |
ASTM F 1120 : 1987 : R2010
|
Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications |
ASTM A 988/A988M : 2017 : REDLINE
|
Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service |
BS EN ISO 25457:2008
|
Petroleum, petrochemical and natural gas industries. Flare details for general refinery and petrochemical service |
ASTM F 781 : 1995
|
Standard Specification for Perfluoro (Alkoxyalkane) Copolymer (PFA) Plastic-Lined Ferrous Metal Pipe and Fittings (Withdrawn 2004) |
ISO 7121:2016
|
Steel ball valves for general-purpose industrial applications |
ASTM F 1120 : 1987 : R2004
|
Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications |
ASTM F 1139 : 1988 : R2015
|
Standard Specification for Steam Traps and Drains |
BS EN ISO 16904:2016
|
Petroleum and natural gas industries. Design and testing of LNG marine transfer arms for conventional onshore terminals |
ISO 10438-1:2007
|
Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 1: General requirements |
ASTM F 1199 : 1988 : R2004
|
Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum) |
ISO 18154:2017
|
Ships and marine technology — Safety valve for cargo tanks of LNG carriers — Design and testing requirements |
PD 8010-2:2004
|
Code of practice for pipelines Subsea pipelines |
BS 5908:1980
|
Code of practice for fire precautions in chemical plant |
ISO 18139:2017
|
Ships and marine technology — Globe valves for use in low temperature applications — Design and testing requirements |
ISO 20519:2017
|
Ships and marine technology Specification for bunkering of liquefied natural gas fuelled vessels |
ISO 8277:2013
|
Ships and marine technology — Pipework and machinery — Information transfer |
UNE-EN 13121-3:2017
|
GRP tanks and vessels for use above ground - Part 3: Design and workmanship |
ASTM F 3149 : 2015
|
Standard Practice for Determining the Maintenance Factor (m) and Yield Factor (y) Loading Constants Applicable to Gasket Materials and Designs |
BS 1560-3.1:1989
|
Circular flanges for pipes, valves and fittings (Class designated). Steel, cast iron and copper alloy flanges Specification for steel flanges |
BS 5306-4(2001) : 2001
|
FIRE EXTINGUISHING INSTALLATIONS AND EQUIPMENT ON PREMISES - PART 4: SPECIFICATION FOR CARBON DIOXIDE SYSTEMS |
BS ISO 18139:2017
|
Ships and marine technology. Globe valves for use in low temperature applications. Design and testing requirements |
BS ISO 19240:2017
|
Industrial valves. Lined metal quarter turn and check valves for chemical process and related industries |
BS 5306-4:1986
|
Fire extinguishing installations and equipment on premises Specification for carbon dioxide systems |
PD ISO/TR 17177:2015
|
Petroleum and natural gas industries. Guidelines for the marine interfaces of hybrid LNG terminals |
ASTM F 1510 : 2007 : R2013
|
Standard Specification for Rotary Positive Displacement Pumps, Ships Use |
ASTM F 1386 : 1992 : R2016 : EDT 1
|
Standard Guide for Construction of Sounding Tube and Striker Plate for Tank Sounding |
BS EN ISO 15761:2002
|
Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries |
ASTM F 1007 : 1986 : R1996 : EDT 1
|
Standard Specification for Pipe-Line Expansion Joints of the Packed Slip Type for Marine Application |
BS EN 1515-3:2005
|
Flanges and their joints. Bolting Classification of bolt materials for steel flanges, class designated |
ISO 27509:2012
|
Petroleum and natural gas industries Compact flanged connections with IX seal ring |
CSA/ANSI LC 6:08 (R2018)
|
Natural gas operated diaphragm pumps |
ASTM F 1122 : 2004 : R2010
|
Standard Specification for Quick Disconnect Couplings (6 in. NPS and Smaller) |
CAN/CSA-Z662-15
|
Oil and gas pipeline systems |
ISO 18647:2017
|
Petroleum and natural gas industries — Modular drilling rigs for offshore fixed platforms |
UFC 3-460-01 : Change 3
|
UNIFIED FACILITIES CRITERIA - DESIGN: PETROLEUM FUEL FACILITIES |
NEMA SM 24-1991 (R1997, R2002)
|
LAND BASED STEAM TURBINE GENERATOR SETS 0 TO 33,000 kW |
BS EN 16125:2015
|
LPG Equipment and Accessories. Pipework systems and supports. LPG in liquid phase and vapour pressure phase |
ASTM F 1123 : 1987 : R2015
|
Standard Specification for Non-Metallic Expansion Joints |
ASME PV CODE 8 DIV 3 : 2017
|
BPVC Section VIII-BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS - ALTERNATIVE RULES FOR CONSTRUCTION OF HIGH PRESSURE VESSELS |
ASTM D 4021 : 1992
|
Standard Specification for Glass-Fiber-Reinforced Polyester Underground Petroleum Storage Tanks (Withdrawn 1999) |
ASME PCC 1 : 2013
|
GUIDELINES FOR PRESSURE BOUNDARY BOLTED FLANGE JOINT ASSEMBLY |
MSS SP 135 : 2016
|
HIGH PRESSURE KNIFE GATE VALVES |
ASTM F 1020 : 1986 : R2018
|
Standard Specification for Line-Blind Valves for Marine Applications |
ASME PCC 2 : 2015
|
REPAIR OF PRESSURE EQUIPMENT AND PIPING |
API 14E CHINESE : 2007
|
RECOMMENDED PRACTICE FOR DESIGN AND INSTALLATION OF OFFSHORE PRODUCTION PLATFORM PIPING SYSTEMS |
DIN EN ISO 23553-1:2014-09
|
Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014); German version EN ISO 23553-1:2014 |
BS EN ISO 20848-3:2008
|
Packaging. Plastics drums Plug/bung closure systems for plastics drums with a nominal capacity of 113,6 l to 220 l |
ISO 13709:2009
|
Centrifugal pumps for petroleum, petrochemical and natural gas industries |
ISO 16812:2007
|
Petroleum, petrochemical and natural gas industries Shell-and-tube heat exchangers |
ISO 10439-1:2015
|
Petroleum, petrochemical and natural gas industries Axial and centrifugal compressors and expander-compressors Part 1: General requirements |
ASTM F 1973 : 2013
|
Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems |
ASTM F 1508 : 1996 : R2016 : EDT 1
|
Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas, and Liquid Services |
BS EN ISO 13710:2004
|
Petroleum, petrochemical and natural gas industries. Reciprocating positive displacement pumps |
ASTM F 1155 : 2010
|
Standard Practice for Selection and Application of Piping System Materials |
DIN EN 16125:2016-03
|
LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE |
DIN 30690-1:2016-04
|
CONSTRUCTION ELEMENTS IN THE GAS SUPPLY SYSTEM - PART 1: REQUIREMENTS FOR CONSTRUCTION ELEMENTS IN GAS SUPPLY SYSTEMS |
BS EN ISO 13709:2003
|
Centrifugal pumps for petroleum, petrochemical and natural gas industries |
ASTM F 2045 : 2000 : R2011
|
Standard Specification for Indicators, Sight, Liquid Level, Direct and Indirect Reading, Tubular Glass/Plastic |
UNE-EN ISO 20519:2017
|
Ships and marine technology - Specification for bunkering of liquefied natural gas fuelled vessels (ISO 20519:2017) |
ASTM F 1565 : 2000 : R2006
|
Standard Specification for Pressure-Reducing Valves for Steam Service |
ASTM F 2363/F2363M : 2017 : REDLINE
|
Standard Specification for Sewage and Graywater Flow Through Treatment Systems |
MSS SP 67 : 2017
|
BUTTERFLY VALVES |
CSA Z1006:16 (R2020)
|
Management of work in confined spaces |
ISO 10440-1:2007
|
Petroleum, petrochemical and natural gas industries — Rotary-type positive-displacement compressors — Part 1: Process compressors |
API 650 : 2013
|
WELDED TANKS FOR OIL STORAGE |
IEC 60534-7:2010
|
Industrial-process control valves - Part 7: Control valve data sheet |
ASTM F 2045 : 2000
|
Standard Specification for Indicators, Sight, Liquid Level, Direct and Indirect Reading, Tubular Glass/Plastic |
ASTM F 1985 : 1999 : R2019 : EDT 1
|
Standard Specification for Pneumatic-Operated, Globe-Style, Control Valves |
ASTM F 1030 : 1986 : R2014 : EDT 1
|
Standard Practice for Selection of Valve Operators |
ASTM F 1985 : 1999 : R2011
|
Standard Specification for Pneumatic-Operated, Globe-Style, Control Valves |
ASTM F 1973 : 2013 : R2018
|
Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems |
BS EN 1759-1:2004
|
Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class-designated Steel flanges, NPS 1/2 to 24 |
ASTM F 1006 : 1986 : R2014 : EDT 1
|
Standard Specification for Entrainment Separators for Use in Marine Piping Applications |
ASTM D 4097 : 2001
|
Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks |
CSA C900.2 : 2013
|
HEAT METERS - PART 2: CONSTRUCTIONAL REQUIREMENTS |
ISO 14313:2007
|
Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves |
ASTM F 975 : 1986 : R1993 : EDT 1
|
Specification for Auxiliary Single Stage Steam Turbines for Shipboard Use (Withdrawn 2000) |
BS 5156:1985
|
Specification for diaphragm valves |
ASTM F 1201 : 1988 : R2016
|
Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F |
ISO 10631:2013
|
Metallic butterfly valves for general purposes |
ISO 10436:1993
|
Petroleum and natural gas industries — General-purpose steam turbines for refinery service |
ISO 21049:2004
|
Pumps Shaft sealing systems for centrifugal and rotary pumps |
DIN EN ISO 10434:2005-01
|
BOLTED BONNET STEEL GATE VALVES FOR THE PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES |
ASTM F 1985 : 1999 : R2005
|
Standard Specification for Pneumatic-Operated, Globe-Style, Control Valves |
ASTM F 1199 : 1988 : R2010
|
Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum) |
ASTM F 1386 : 1992 : R1997
|
Standard Guide for Construction of a Sounding Tube and Striker Plate for Tank Sounding |
ASTM A 989/A989M : 2018 : REDLINE
|
Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service |
ASTM D 5677 : 2017 : REDLINE
|
Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines |
ASTM F 1006 : 1986 : R2008
|
Standard Specification for Entrainment Separators for Use in Marine Piping Applications |
ASTM F 1139 : 1988 : R2004
|
Standard Specification for Steam Traps and Drains |
ASTM F 682 : 1982 : REV A : R2014
|
Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings |
ASTM F 1030 : 1986 : R2004
|
Standard Practice for Selection of Valve Operators |
ISO 16904:2016
|
Petroleum and natural gas industries Design and testing of LNG marine transfer arms for conventional onshore terminals |
ASTM F 704 : 1981 : R1996 : EDT 1
|
Standard Practice for Selecting Bolting Lengths for Piping System Flanged Joints |
EN ISO 15761:2002
|
Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries (ISO 15761:2002) |
ASME B31.3:2016
|
PROCESS PIPING |
ASME PV CODE 8 DIV 2 : 2017
|
BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 2- ALTERNATIVE RULES |
UNE-EN ISO 23553-1:2014
|
Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014) |
DIN EN 13121-3:2016-10
|
GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP |
EN 1515-3:2005
|
Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges, class designated |
MSS SP 68 : 2017
|
HIGH PRESSURE BUTTERFLY VALVES WITH OFFSET DESIGN |
ASTM F 1200 : 1988 : R1998
|
Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F) |
UNE-EN 12516-1:2016
|
Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells |
ISO 15590-3:2004
|
Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 3: Flanges |
UNE 27488:2014
|
Civil shipbuilding and ship repairing. Selective lists. Piping and fittings: Slip-on steel flange (ASTM-ANSI). |
ASTM D 5421 : 2015 : REDLINE
|
Standard Specification for Contact Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges |
ASTM F 2686 : 2014 : REDLINE
|
Standard Specification for Glass Fiber Reinforced Thermoplastic Pipe |
ASTM F 546 : 1995
|
Standard Specification for Perfluoro (Ethylene-Propylene) Copolymer (FEP) Plastic-Lined Ferrous Metal Pipe and Fittings (Withdrawn 2002) |
ASTM F 2896 : 2011
|
Standard Specification for Reinforced Polyethylene Composite Pipe For The Transport Of Oil And Gas And Hazardous Liquids |
ASTM F 1172 : 1988 : R2015 : EDT 1
|
Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type |
ASTM F 1565 : 2000 : R2013
|
Standard Specification for Pressure-Reducing Valves for Steam Service |
ASTM F 1273 : 1991 : R2013
|
Standard Specification for Tank Vent Flame Arresters |
ISO 15840:2004
|
Ships and marine technology Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine applications |
BS PD5500(2009) : 2009
|
SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
ASTM F 998 : 2012
|
Standard Specification for Centrifugal Pump, Shipboard Use |
ISO 17602:2014
|
Ships and marine technology Metal valves for use in flanged pipe Face-to-face and centre-to-face dimensions |
BS EN ISO 13703 : 2001
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND INSTALLATION OF PIPING SYSTEMS ON OFFSHORE PRODUCTION PLATFORMS |
ASTM F 1973 : 2013 : EDT 1
|
Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems |
ISO 16003:2008
|
Components for fire-extinguishing systems using gas— Requirements and test methods — Container valve assemblies and their actuators; selector valves and their actuators; nozzles; flexible and rigid connectors; and check valves and non-return valves |
ASTM F 1020 : 1986 : R1996 : EDT 1
|
Standard Specification for Line-Blind Valves for Marine Applications |
EN 13121-3:2016
|
GRP tanks and vessels for use above ground - Part 3: Design and workmanship |
BS EN ISO 12212:2012
|
Petroleum, petrochemical and natural gas industries. Hairpin-type heat exchangers |
API 650 : 2013+ADD 3 : 2018
|
WELDED TANKS FOR OIL STORAGE |
BS EN ISO 23553-1:2014
|
Safety and control devices for oil burners and oil-burning appliances. Particular requirements Automatic and semi-automatic valves |
ASTM F 1122 : 2004
|
Standard Specification for Quick Disconnect Couplings (6 in. NPS and Smaller) |
ASTM F 1007 : 1986 : R2002
|
Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application |
ASME B31.4 : 2016
|
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES |
UNE-EN 16125:2016
|
LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase |
BS 4082-2:1969
|
Specification for external dimensions for vertical in-line centrifugal pumps \'U\' Type |
ASTM F 1120 : 1987 : R1998
|
Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications |
ASTM F 1386 : 1992 : R2004
|
Standard Guide for Construction of a Sounding Tube and Striker Plate for Tank Sounding |
ASTM F 1273 : 1991 : R2007
|
Standard Specification for Tank Vent Flame Arresters |
ASTM F 423 : 1995
|
Standard Specification for Polytetrafluoroethylene (PTFE) Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges (Withdrawn 2002) |
BS ISO 10631:2013
|
Metallic butterfly valves for general purposes |
BS 8010-3:1993
|
Code of practice for pipelines Pipelines subsea: design, construction and installation |
BS EN ISO 10437:2003
|
Petroleum, petrochemical and natural gas industries. Steam turbines. Special-purpose applications |
ASTM F 1006 : 1986 : R1997
|
Standard Specification for Entrainment Separators for Use in Marine Piping Applications |
ISO 10434:2004
|
Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries |
ASTM A 727/A727M : 2014 : REDLINE
|
Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness |
ASTM F 2798 : 2009 : R2014 : EDT 1
|
Standard Specification for Sealless Lube Oil Pump with Oil Through Motor for Marine Applications |
ASTM F 682 : 1982 : REV A : R2008
|
Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings |
BS EN ISO 27509:2012
|
Petroleum and natural gas industries. Compact flanged connections with IX seal ring |
BS ISO 17602:2014
|
Ships and marine technology. Metal valves for use in flanged pipe. Face-to-face and centre-to-face dimensions |
BS PD8010-1(2015) : 2015
|
PIPELINE SYSTEMS - PART 1: STEEL PIPELINES ON LAND - CODE OF PRACTICE |
ASTM F 1200 : 1988 : R2010
|
Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F) |
ASTM F 1172 : 1988 : R2004
|
Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type |
ISO/TR 17177:2015
|
Petroleum and natural gas industries Guidelines for the marine interfaces of hybrid LNG terminals |
ASTM F 1139 : 1988 : R1998
|
Standard Specification for Steam Traps and Drains |
PD 8010-1:2004
|
Code of practice for pipelines Steel pipelines on land |
ISO 10437:2003
|
Petroleum, petrochemical and natural gas industries — Steam turbines — Special-purpose applications |
ASTM F 1273 : 1991 : R2002
|
Standard Specification for Tank Vent Flame Arresters |
ASTM F 1565 : 2000
|
Standard Specification for Pressure-Reducing Valves for Steam Service |
ASTM F 1173 : 2001
|
Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications |
ASTM F 1200 : 1988 : R2016
|
Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F) |
ASTM F 1120 : 1987 : R2015
|
Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications |
ISO 10303-227:2005
|
Industrial automation systems and integration — Product data representation and exchange — Part 227: Application protocol: Plant spatial configuration |
ISO 13710:2004
|
Petroleum, petrochemical and natural gas industries Reciprocating positive displacement pumps |
ASME B46.1 : 2009
|
SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
NEMA SM 23-1991 (R1997, R2002)
|
STEAM TURBINES FOR MECHANICAL DRIVE SERVICE |
ASTM F 1567 : 1994 : R2006
|
Standard Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers |
ASTM F 1199 : 1988 : R2015
|
Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum) |
ASTM F 1271 : 1990 : R1995 : EDT 1
|
Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications |
ISO 14723:2009
|
Petroleum and natural gas industries — Pipeline transportation systems — Subsea pipeline valves |
ASTM F 1508 : 1996 : R2010
|
Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas and Liquid Services |
ISO 17078-4:2010
|
Petroleum and natural gas industries — Drilling and production equipment — Part 4: Practices for side-pocket mandrels and related equipment |
ISO 23551-1:2012
|
Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves |
BS PD5500(2012) : 2012
|
SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
BS EN ISO 10440-1:2001
|
Petroleum and natural gas industries. Rotary-type positive-displacement compressors Process compressors (oil-free) |
CSA Z1006 : 2016
|
MANAGEMENT OF WORK IN CONFINED SPACES |
BS EN ISO 14723:2009
|
Petroleum and natural gas industries. Pipeline transportation systems. Subsea pipeline valves |
ANSI/CSA-B149.6-15
|
Code for digester gas, landfill gas, and biogas generation and utilization |
NASA STD 8719.24 : 2011
|
NASA EXPENDABLE LAUNCH VEHICLE PAYLOAD SAFETY REQUIREMENTS |
BS 5306-4:2001+A1:2012
|
Fire extinguishing installations and equipment on premises Specification for carbon dioxide systems |
API 621 : 2010
|
RECONDITIONING OF METALLIC GATE, GLOBE, AND CHECK VALVES |
ASTM F 1122 : 2004 : R2015 : EDT 1
|
Standard Specification for Quick Disconnect Couplings (6 in. NPS and Smaller) |
BS EN ISO 16812:2007
|
Petroleum, petrochemical and natural gas industries. Shell-and-tube heat exchangers |
ASTM D 4024 : 2015 : REDLINE
|
Standard Specification for Machine Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges |
ASTM F 1006 : 1986 : R2004
|
Standard Specification for Entrainment Separators for Use in Marine Piping Applications |
ASTM F 1510 : 2007
|
Standard Specification for Rotary Positive Displacement Pumps, Ships Use |
UNE 27489:2014
|
Civil shipbuilding and ship repairing. Selective lists. Piping and fittings: Butt welding neck steel flanges (ASTM-ANSI) |
ANSI NGV4.8 :2012
|
STANDARD FOR NATURAL GAS VEHICLE FUELING STATION RECIPROCATING COMPRESSOR GUIDELINES |
BS EN 13942:2009
|
Petroleum and natural gas industries. Pipeline transportation systems. Pipeline valves |
ASTM F 1508 : 1996
|
Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas and Liquid Services |
API 1169 : 2013
|
RECOMMENDED PRACTICE FOR BASIC INSPECTION REQUIREMENTS - NEW PIPELINE CONSTRUCTION |
BS EN ISO 17292:2015
|
Metal ball valves for petroleum, petrochemical and allied industries |
ASTM F 1508 : 1996 : R2004
|
Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas and Liquid Services |
ASTM F 2045 : 2000 : R2018 : EDT 1
|
Standard Specification for Indicators, Sight, Liquid Level, Direct and Indirect Reading, Tubular Glass/Plastic |
ASME B31.8 : 2016
|
Gas Transmission and Distribution Piping Systems |
ISO 20848-3:2006
|
Packaging Plastics drums Part 3: Plug/bung closure systems for plastics drums with a nominal capacity of 113,6 l to 220 l |
ASTM F 492 : 1995
|
Standard Specification for Propylene and Polypropylene (PP) Plastic-Lined Ferrous Metal Pipe and Fittings (Withdrawn 2004) |
BS EN ISO 21049:2004
|
Pumps. Shaft sealing systems for centrifugal and rotary pumps |
DIN EN ISO 20848-3:2008-09
|
PACKAGING - PLASTICS DRUMS - PART 3: PLUG/BUNG CLOSURE SYSTEMS FOR PLASTICS DRUMS WITH A NOMINAL CAPACITY OF 113,6 L TO 220 L |
BS 4082-1:1969
|
Specification for external dimensions for vertical in-line centrifugal pumps \'I\' Type |
ASTM F 2798 : 2009 : R2018
|
Standard Specification for Sealless Lube Oil Pump with Oil Through Motor for Marine Applications |
ISO 13703:2000
|
Petroleum and natural gas industries Design and installation of piping systems on offshore production platforms |
BS 8010-2.8:1992
|
Code of practice for pipelines. Pipelines on land: design, construction and installation Steel for oil and gas |
ASTM D 1998 : 2015 : REDLINE
|
Standard Specification for Polyethylene Upright Storage Tanks |
BS EN ISO 10438-1:2003
|
Petroleum, petrochemical and natural gas industries. Lubrication, shaft-sealing and control-oil systems and auxiliaries General requirements |
ASTM F 998 : 2012 : R2018
|
Standard Specification for Centrifugal Pump, Shipboard Use |
ASME PV CODE 8 DIV 1 : 2017
|
BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
DIN EN 14161:2015-07
|
ABSCHLUESSE AUSSEN UND AUSSENJALOUSIEN - LEISTUNGS- UND SICHERHEITSANFORDERUNGEN |
BS PD5500(2015) : 2015
|
SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
BS PD5500(2018) : 2018
|
SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
ASTM F 682 : 1982 : REV A : R1998
|
Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings |
ASTM A 105/A105M : 2014-11
|
SPECIFICATION FOR CARBON STEEL FORGINGS FOR PIPING APPLICATIONS |
ANSI NGV4.8 : 2012 : R2013
|
STANDARD FOR NATURAL GAS VEHICLE FUELING STATION RECIPROCATING COMPRESSOR GUIDELINES |
CSA Z245-12 : 2017
|
STEEL FLANGES |
ASTM F 2934 : 2012
|
Standard Specification for Circular Metallic Bellows Type Expansion Joint for HVAC Piping Applications |
ASTM F 1030 : 1986 : R1998
|
Standard Practice for Selection of Valve Operators |
BS 1414:1975
|
Specification for steel wedge gate valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries |
BS EN ISO 17078-2:2007
|
Petroleum and natural gas industries. Drilling and production equipment Flow-control devices for side-pocket mandrels |
ASTM F 1007 : 1986 : R2014
|
Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application |
ISO 12212:2012
|
Petroleum, petrochemical and natural gas industries — Hairpin-type heat exchangers |
BS EN 14161 : 2011
|
PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS (ISO 13623:2009 MODIFIED) |
ASTM F 1123 : 1987 : R2010
|
Standard Specification for Non-Metallic Expansion Joints |
ISO 19240:2017
|
Industrial valves — Lined metal quarter turn and check valves for chemical process and related industries |
ASTM F 1199 : 1988 : R1998
|
Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum) |
BS EN ISO 10439-1:2015
|
Petroleum, petrochemical and natural gas industries. Axial and centrifugal compressors and expander-compressors General requirements |
ISO 23553-1:2014
|
Safety and control devices for oil burners and oil-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves |
ASTM F 1139 : 1988 : R2010
|
Standard Specification for Steam Traps and Drains |
ASTM F 2934 : 2012 : R2018
|
Standard Specification for Circular Metallic Bellows Type Expansion Joint for HVAC Piping Applications |
ASTM F 2015 : 2000 : R2013
|
Standard Specification for Lap Joint Flange Pipe End Applications |
BS ISO 13628-11:2007
|
Petroleum and natural gas industries. Design and operation of subsea production systems Flexible pipe systems for subsea and marine applications |
API SPEC 12K : 2008
|
SPECIFICATION FOR INDIRECT TYPE OILFIELD HEATERS |
ASTM D 3089 : 1997 : R2008
|
Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
ASTM F 2880 : 2014 : REDLINE
|
Standard Specification for Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe in Nominal Pipe Sizes 3/4 in. to 65 in. |
BS ISO 15840:2004
|
Ships and marine technology. Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine applications |
API SPEC 12L : 2008
|
SPECIFICATION FOR VERTICAL AND HORIZONTAL EMULSION TREATERS |
BS PD8010-2(2015) : 2015
|
PIPELINE SYSTEMS - PART 2: SUBSEA PIPELINES - CODE OF PRACTICE |
BS EN ISO 10434:2004
|
Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries |
ASTM F 1201 : 1988 : R1998
|
Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F |
ASTM A 694/A694M : 2016 : REDLINE
|
Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service |
DIN EN 12516-1:2015-01
|
INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
DIN EN 1515-3:2005-12
|
Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges, Class designated |
PD 8010-2:2015+A1:2016
|
Pipeline systems Subsea pipelines. Code of practice |
ASTM F 1155 : 2010 : R2015
|
Standard Practice for Selection and Application of Piping System Materials |
ASTM C 1129 : 2017 : REDLINE
|
Standard Practice for Estimation of Heat Savings by Adding Thermal Insulation to Bare Valves and Flanges |
ASTM A 707/A707M : 2014 : REDLINE
|
Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service |
ASTM D 6041 : 2011
|
Standard Specification for Contact-Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings |
ASTM F 1273 : 1991 : R1996 : EDT 1
|
Standard Specification for Tank Vent Flame Arresters |
Z245.15-17
|
Steel valves |
ANSI/ASSE Z117.1 : 2009
|
SAFETY REQUIREMENTS FOR ENTERING CONFINED SPACES |
ASME B31.1 : 2016
|
POWER PIPING |
ANSI/CSA HGV 4.8-2012 (R2018)
|
Hydrogen gas vehicle fueling station compressor guidelines |
BS PD5500(2006) : 2006
|
SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
BS 5306-5.1(1982) : 1982
|
FIRE EXTINGUISHING INSTALLATIONS AND EQUIPMENT ON PREMISES - HALON SYSTEMS - HALON 1301 TOTAL FLOODING SYSTEMS |
ISO 17078-2:2007
|
Petroleum and natural gas industries — Drilling and production equipment — Part 2: Flow-control devices for side-pocket mandrels |
BS ISO 7121:2016
|
Steel ball valves for general-purpose industrial applications |
DIN EN ISO 20519:2016-05 (Draft)
|
SHIPS AND MARINE TECHNOLOGY - SPECIFICATION FOR BUNKERING OF LIQUEFIED NATURAL GAS FUELLED VESSELS (ISO 20519:2017) |
ASTM F 1007 : 1986 : R2007
|
Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application |
ASTM F 2896 : 2011 : R2017
|
Standard Specification for Reinforced Polyethylene Composite Pipe For The Transport Of Oil And Gas And Hazardous Liquids |
ASTM F 704 : 1981 : R2014
|
Standard Practice for Selecting Bolting Lengths for Piping System Flanged Joints |
ASTM F 2805 : 2016 : REDLINE
|
Standard Specification for Multilayer Thermoplastic And Flexible Steel Pipe And Connections |
ASTM F 2045 : 2000 : R2006
|
Standard Specification for Indicators, Sight, Liquid Level, Direct and Indirect Reading, Tubular Glass/Plastic |
BS ISO 3977-3:2004
|
Gas turbines. Procurement Design requirements |
PD 5500:2003
|
Specification for unfired fusion welded pressure vessels |
UFC 3-430-11 : 2001
|
UNIFIED FACILITIES CRITERIA - BOILER CONTROL SYSTEMS |
ASME B16.21 : 2016
|
NONMETALLIC FLAT GASKETS FOR PIPE FLANGES |
BS 5306-5.1:1992
|
Code of practice for fire extinguishing installations and equipment on premises. Halon systems Specification for halon 1301 total flooding systems |
BS EN ISO 13628-1 : 2005
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS |
ISO 25457:2008
|
Petroleum, petrochemical and natural gas industries — Flare details for general refinery and petrochemical service |
ASTM B 834 : 2017 : REDLINE
|
Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367), Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625), Nickel-Chromium-Iron Alloys (UNS N06600 and N06690), and Nickel-Chromium-Iron-Columbium-Molybdenum (UNS N07718) Alloy Pipe Flanges, Fittings, Valves, and Parts |
ASTM F 704 : 1981 : R2009
|
Standard Practice for Selecting Bolting Lengths for Piping System Flanged Joints |
ASTM F 704 : 1981 : R2001
|
Standard Practice for Selecting Bolting Lengths for Piping System Flanged Joints |
ASTM F 1271 : 1990 : R2006
|
Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications |
BS ISO 7005-1:2011
|
Pipe flanges Steel flanges for industrial and general service piping systems |
ASTM F 1020 : 1986 : R2001
|
Standard Specification for Line-Blind Valves for Marine Applications |
DIN EN ISO 20519:2017-06
|
Ships and marine technology - Specification for bunkering of liquefied natural gas fuelled vessels (ISO 20519:2017) |
ASME PV CODE 4 : 2017
|
BPVC Section IV-BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF HEATING BOILERS |
MSS SP 81 : 2017
|
STAINLESS-STEEL OR STAINLESS-STEEL-LINED, BONNETLESS, KNIFE GATE VALVES WITH FLANGED ENDS |
BS 5306-5.2:1984
|
Code of practice for fire extinguishing installations and equipment on premises. Halon systems Halon 1211 total flooding systems |
BS ISO 18154:2017
|
Ships and marine technology. Safety valve for cargo tanks of LNG carriers. Design and testing requirements |
DIN EN 1759-1:2005-02
|
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24 |
PIP VESV1002 : 2012
|
DESIGN AND FABRICATION SPECIFICATION FOR VESSELS ASME CODE SECTION 8, DIVISIONS 1 AND 2 |
ASTM F 1173 : 2001 : R2018
|
Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications |
ASTM F 491 : 1995
|
Standard Specification for Poly(Vinylidene Fluoride) (PVDF) Plastic-Lined Ferrous Metal Pipe and Fittings (Withdrawn 2002) |
ASTM F 1173 : 2001 : R2012
|
Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications |
ASME PV CODE 1 : 2017
|
BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF POWER BOILERS |
BS EN ISO 20519:2017
|
Ships and marine technology. Specification for bunkering of liquefied natural gas fuelled vessels |
BS EN 13121-3:2016
|
GRP tanks and vessels for use above ground Design and workmanship |
ASTM F 1020 : 1986 : R2011
|
Standard Specification for Line-Blind Valves for Marine Applications |
BS EN 12516-1 : 2014
|
INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
UNE-EN ISO 17292:2016
|
Metal ball valves for petroleum, petrochemical and allied industries (ISO 17292:2015) |
NBR 15593 : 2008
|
PRESSURIZED BURIED SYSTEMS FOR WATER DISTRIBUTION AND SEWER - REQUIREMENTS FOR FUSION WELDED POLYETHYLENE FITTINGS PE 80 AND PE 100 |
BS EN ISO 17078-4:2010
|
Petroleum and natural gas industries. Drilling and production equipment Practices for side-pocket mandrels and related equipment CD-ROM |
API 610 REDLINE : 2010
|
CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
ONORM EN ISO 25457 : 2009
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - FLARE DETAILS FOR GENERAL REFINERY AND PETROCHEMICAL SERVICE |
API 15HR CHINESE : 2001
|
SPECIFICATION FOR HIGH PRESSURE FIBERGLASS LINE PIPE |
ASME B16.47 : 2017
|
LARGE DIAMETER STEEL FLANGES: NPS 26 THROUGH NPS 60 METRIC/INCH STANDARD |
API 537 REDLINE : 2008
|
FLARE DETAILS FOR GENERAL REFINERY AND PETROCHEMICAL SERVICE |
API 621 REDLINE : 2010
|
RECONDITIONING OF METALLIC GATE, GLOBE, AND CHECK VALVES |
API 620 REDLINE : 2008
|
DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
PIP PNC00005 : 2016
|
DESIGN OF ASME B31.3 - METALLIC PIPING SYSTEMS |
API 619 REDLINE : 2010
|
ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
ASME PTC6 : 2004 : INC : ERR 1 : 2006-02
|
PERFORMANCE TEST CODES - STEAM TURBINES |
API 6DSS REDLINE : 2009
|
SPECIFICATION FOR SUBSEA PIPELINE VALVES |
API 674 REDLINE : 2010
|
POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
ASME B16.38 : 2012 : R2017
|
LARGE METALLIC VALVES FOR GAS DISTRIBUTION - MANUALLY OPERATED, NPS 2[1/2] (DN 65) TO NPS 12 (DN 300), 125 PSIG (8.6 BAR) MAXIMUM |
API 616 REDLINE : 2011
|
GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
ASME B16.38 : 2012
|
LARGE METALLIC VALVES FOR GAS DISTRIBUTION - MANUALLY OPERATED, NPS 2[1/2] (DN 65) TO NPS 12 (DN 300), 125 PSIG (8.6 BAR) MAXIMUM |
API 685 REDLINE : 2011
|
SEALLESS CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL, AND GAS INDUSTRY PROCESS SERVICE |
API 608 CHINESE : 2012
|
METAL BALL VALVES - FLANGED, THREADED, AND WELDING ENDS |
ASME STP-PT-003 : 2005
|
HYDROGEN STANDARDIZATION INTERIM REPORT FOR TANKS, PIPING, AND PIPELINES |
ASME B16.20 : 2017
|
METALLIC GASKETS FOR PIPE FLANGES |
API 602 REDLINE : 2009
|
STEEL GATE, GLOBE, AND CHECK VALVES FOR SIZES NPS 4 (DN 100) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
API 17B REDLINE : 2008
|
RECOMMENDED PRACTICE FOR FLEXIBLE PIPE |
PIP RESE001 : 2017
|
GENERAL PURPOSE SKID-MOUNTED PACKAGED EQUIPMENT SPECIFICATION |
API 609 REDLINE : 2009
|
BUTTERFLY VALVES: DOUBLE-FLANGED, LUG- AND WAFER-TYPE |
API 1111 REDLINE : 2009
|
DESIGN, CONSTRUCTION, OPERATION, AND MAINTENANCE OF OFFSHORE HYDROCARBON PIPELINES (LIMIT STATE DESIGN) |
API 600 REDLINE : 2009
|
STEEL GATE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS |
API 594 REDLINE : 2010
|
CHECK VALVES: FLANGED, LUG, WAFER, AND BUTT-WELDING |
UNE-EN 16125:2020
|
LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase |
API 608 REDLINE : 2008
|
METAL BALL VALVES - FLANGED, THREADED AND WELDING ENDS |
API 6H : 1998 : R2011
|
SPECIFICATION ON END CLOSURES, CONNECTORS AND SWIVELS |
API 614 REDLINE : 2008
|
LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES |
12/30262118 DC
|
BS ISO 14313 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES |
API 676 REDLINE : 2009
|
POSITIVE DISPLACEMENT PUMPS - ROTARY |
PIP PNE00012 : 2017
|
PIPING EXAMINATION AND LEAK TEST GUIDE |
ASME PTC6 : 2004
|
PERFORMANCE TEST CODES - STEAM TURBINES |
ASME B16.10 : 2017
|
FACE-TO-FACE AND END-TO-END DIMENSIONS OF VALVES |
API 6H CHINESE : 1998
|
SPECIFICATION ON END CLOSURES, CONNECTORS AND SWIVELS |
API 526 REDLINE : 2009
|
FLANGED STEEL PRESSURE-RELIEF VALVES |
ASME B31.12 : 2014
|
HYDROGEN PIPING AND PIPELINES |
API 594 CHINESE : 2004
|
CHECK VALVES: FLANGED, LUG, WAFER AND BUTT-WELDING |
API 6H : 1998
|
SPECIFICATION ON END CLOSURES, CONNECTORS AND SWIVELS |
ASME PTC19.3 TW : 2016
|
THERMOWELLS |
API 591 REDLINE : 2008
|
PROCESS VALVE QUALIFICATION PROCEDURE |
API 600 RUSSIAN : 2009
|
STEEL GATE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS |
API 611 REDLINE : 2008
|
GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
API 574 REDLINE : 2009
|
INSPECTION PRACTICES FOR PIPING SYSTEM COMPONENTS |
ASME B18.31.2 : 2014
|
CONTINUOUS THREAD STUD, DOUBLE-END STUD, AND FLANGE BOLTING STUD (STUD BOLT) (INCH SERIES) |
ASME PTC6 : 2004 : R2014
|
PERFORMANCE TEST CODES - STEAM TURBINES |