ASTM F 2249 : 2003 : R2009
|
Standard Specification for In-Service Test Methods for Temporary Grounding Jumper Assemblies Used on De-Energized Electric Power Lines and Equipment |
ASTM B 520 : 2012
|
Standard Specification for Tin-Coated, Copper-Clad Steel Wire for Electronic Application |
ASTM B 286 : 2007
|
Standard Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment |
ASTM B 524/B524M : 2018 : REDLINE
|
Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Alloy Reinforced (ACAR, 1350/6201) |
ASTM B 236 : 2007 : R2015
|
Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) |
ASTM B 317/B317M : 2007
|
Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor) |
GR 1398 CORE : ISSUE 1 REV 1
|
GENERIC REQUIREMENTS FOR COAXIAL DROP CABLE |
ASTM B 531 : 1990 : R1998 : EDT 1
|
Standard Specification for Aluminum-Alloy 5005 Drawing Stock for Electrical Purposes (Withdrawn 2003) |
ASTM D 1676 : 2017 : REDLINE
|
Standard Test Methods for Film-Insulated Magnet Wire |
ASTM B 786/B786M : 2008 : R2013 : EDT 1
|
Standard Specification for 19 Wire Combination Unilay-Stranded Aluminum Conductors for Subsequent Insulation |
J-W-1177 Revision B:1988
|
WIRE, MAGNET, ELECTRICAL, GENERAL SPECIFICATION |
ASTM B 415 : 2016 : REDLINE
|
Standard Specification for Hard-Drawn Aluminum-Clad Steel Wire |
MIL-DTL-49514 Revision A:2016
|
COPPER CRUSHER SPHERES FOR CANNON AND MORTAR PRESSURE GAUGES, GENERAL SPECIFICATION FOR |
ASTM B 170 : 1999 : R2015
|
Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes |
ASTM B 958 : 2008
|
Standard Specification for Extra-High-Strength and Ultra-High-Strength Class A Zinc–5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors |
MIL-STD-2142 Revision A:1990
|
MAGNETIC SILENCING CHARACTERISTICS, MEASUREMENT OF (METRIC) |
ASTM B 965 : 2009
|
Standard Specification for High Performance Tin-Coated Annealed Copper Wire Intended for Electrical and Electronic Application for Solderability |
ASTM B 973 : 2010 : R2014
|
Standard Specification for Tin-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic Application |
SAE AS 81021 : 2016
|
COPPER-BERYLLIUM ALLOY (COPPER ALLOY NUMBERS C17500 AND C17510), STRIP |
ASTM B 33 : 2010 : R2014
|
Standard Specification for Tin-Coated Soft or Annealed Copper Wire for Electrical Purposes |
ASTM B 47 : 1995 : REV A : R2001
|
Standard Specification for Copper Trolley Wire |
ASTM B 786 : 2008 : R2013
|
Standard Specification for 19 Wire Combination Unilay-Stranded Aluminum Conductors for Subsequent Insulation |
ASTM B 341/B341M : 2002
|
Standard Specification for Aluminum-Coated (Aluminized) Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR/AZ) (Withdrawn 2007) |
ASTM B 736 : 2000 : R2006
|
Standard Specification for Aluminum, Aluminum Alloy and Aluminum-Clad Steel Cable Shielding Stock (Withdrawn 2015) |
ASTM B 802/B802M : 2010
|
Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR) |
IEEE 1242-1999
|
IEEE Guide for Specifying and Selecting Power, Control, and Special-Purpose Cable for Petroleum and Chemical Plants |
ASTM B 961 : 2013 : REDLINE
|
Standard Specification for Silver Coated Copper and Copper Alloy Stranded Conductors for Electronic Space Application |
ASTM B 152/B152M : 2013 : REDLINE
|
Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar |
ASTM D 4566 : 2014 : REDLINE
|
Standard Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable |
ASTM B 502/B502M : 2010 : EDT 1
|
Standard Specification for Aluminum-Clad Steel Core Wire for Use in Overhead Electrical Aluminum Conductors |
ASTM B 802/B802M : 2010 : R2016
|
Standard Specification for Zinc–5 % Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR) |
ASTM B 63 : 2007 : R2013
|
Standard Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials |
ASTM B 379 : 2011-05
|
SPECIFICATION FOR PHOSPHORIZED COPPERS - REFINERY SHAPES |
ASTM B 498/B498M : 2008
|
Standard Specification for Zinc-Coated (Galvanized) Steel Core Wire for Use in Overhead Electrical Conductors |
ASTM B 869 : 2007 : R2013
|
Standard Specification for Copper-Clad Steel Electrical Conductor for CATV Drop Wire |
ASTM B 501 : 2010
|
Standard Specification for Silver-Coated, Copper-Clad Steel Wire for Electronic Application |
ASTM B 398/B398M : 2015 : REDLINE
|
Standard Specification for Aluminum-Alloy 6201-T81 and 6201-T83 Wire for Electrical Purposes |
ASTM F 3273 : 2017
|
Standard Specification for Wrought Molybdenum-47.5 Rhenium Alloy for Surgical Implants (UNS R03700) |
ASTM B 233 : 1997 : R2012
|
Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes |
ASTM B 317/B317M : 2007 : R2015 : EDT 1
|
Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor) |
ASTM B 786 : 2008
|
Standard Specification for 19 Wire Combination Unilay-Stranded Aluminum Conductors for Subsequent Insulation |
ASTM B 566 : 2004 : REV A : R2016
|
Standard Specification for Copper-Clad Aluminum Wire |
ASTM B 372 : 2017 : REDLINE
|
Standard Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube |
ASTM B 298 : 2012 : R2017
|
Standard Specification for Silver-Coated Soft or Annealed Copper Wire |
ASTM B 609/B609M : 2012 : R2016
|
Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes |
ASTM B 566 : 2004 : REV A : R2011
|
Standard Specification for Copper-Clad Aluminum Wire |
ASTM A 111 : 1999 : REV A : R2009
|
Standard Specification for Zinc-Coated (Galvanized) "Iron" Telephone and Telegraph Line Wire |
ASTM B 606/B606M : 2008 : EDT 1
|
Standard Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced |
ASTM B 230/B230M : 2007 : R2012
|
Standard Specification for Aluminum 1350–H19 Wire for Electrical Purposes |
ASTM B 116 : 1995
|
Standard Specification for Figure-9 Deep-Grooved and Figure-8 Copper Trolly Wire for Industrial Haulage |
ASTM B 901 : 2004 : R2011
|
Standard Specification for Compressed Round Stranded Aluminum Conductors Using Single Input Wire Construction |
ASTM E 1004 : 2017 : REDLINE
|
Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method |
ASTM B 869 : 2007
|
Standard Specification for Copper-Clad Steel Electrical Conductor for CATV Drop Wire |
ASTM B 910/B910M : 2007 : R2018
|
Standard Specification for Annealed Copper-Clad Steel Wire |
ASTM B 401 : 2012 : R2016
|
Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/COMP) |
ASTM B 317/B317M : 2007 : R2015
|
Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor) |
IPC AJ 820 : A
|
ASSEMBLY AND JOINING HANDBOOK |
MIL-DTL-24643 Revision C:2009
|
Cables, Electric, Low Smoke, Halogen-Free, for Shipboard Use, General Specification for |
MIL-DTL-24640 Revision C:2011
|
CABLES, LIGHTWEIGHT, LOW SMOKE, ELECTRIC, FOR SHIPBOARD USE, GENERAL SPECIFICATION FOR |
SAE AMS 4602 : 2003
|
COPPER BARS, RODS, AND SHAPES OXYGEN-FREE, HARD TEMPER (HO4) (COMPOSITION SIMILAR TO UNS C10200) |
ASTM B 47 : 1995 : REV A : R2017
|
Standard Specification for Copper Trolley Wire |
ASTM B 971 : 2010
|
Standard Specification for Silver-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic Application |
ASTM B 566 : 2004
|
Standard Specification for Copper-Clad Aluminum Wire |
ASTM B 170 : 1999 : R2004
|
Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes |
ASTM B 800 : 2005 : R2015
|
Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes—Annealed and Intermediate Tempers |
MIL C 915 : F
|
CABLE AND CORD ELECTRICAL, FOR SHIPBOARD USE GENERAL SPECIFICATIONS FOR |
ASTM B 972 : 2010 : R2014
|
Standard Specification for Nickel-Coated Braid and Ribbon Flat Copper Wire Intended for use in Electronic Application |
ASTM B 48 : 2000 : R2011
|
Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors |
ASTM B 48 : 2000 : R2005 : EDT 1
|
Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors |
ASTM B 298 : 2012
|
Standard Specification for Silver-Coated Soft or Annealed Copper Wire |
ASTM B 1001 : 2017
|
Standard Specification for Copper Electrode Wire Used for Welding Seams of Steel Cans |
ASTM B 412 : 1995
|
Standard Specification for Copper-Nickel-Silicon Alloy Wire (Withdrawn 2000) |
ASTM B 736 : 2000
|
Standard Specification for Aluminum, Aluminum Alloy and Aluminum-Clad Steel Cable Shielding Stock |
ASTM B 937 : 2018 : REDLINE
|
Standard Specification for Copper-Beryllium Seamless Tube (UNS Nos. C17500 and C17510) |
ASTM B 592 : 2015 : REDLINE
|
Standard Specification for Copper-Zinc-Aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet, Strip, and Rolled Bar |
ASTM B 170 :1999
|
Standard Specification for Oxygen-Free Electrolytic Copper Refinery Shapes |
ASTM F 468M : 2006 : R2012
|
Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric) |
ASTM B 800 : 2005 : R2011
|
Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical PurposesAnnealed and Intermediate Tempers |
ASTM B 800 : 2005
|
Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes-Annealed and Intermediate Tempers |
ASTM B 47 : 1995 : REV A : R2007
|
Standard Specification for Copper Trolley Wire |
MIL-C-81790 Revision A:1990
|
CONNECTORS, RECEPTACLE, EXTERNAL ELECTRIC POWER, AIRCRAFT, GENERAL SPECIFICATION FOR |
ASTM B 441 : 2016 : REDLINE
|
Standard Specification for Copper-Cobalt-Beryllium, Copper-Nickel-Beryllium, and Copper-Nickel-Lead-Beryllium Rod and Bar (UNS Nos. C17500, C17510, and C17465) |
SCTE 177 : 2012
|
SPECIFICATION FOR BRAIDED 75 OHMS, MINI-SERIES QUAD SHIELD COAXIAL CABLE FOR CMTS AND SDI CABLES |
ASTM B 786/B786M : 2008 : R2018
|
Standard Specification for 19 Wire Combination Unilay-Stranded Aluminum Conductors for Subsequent Insulation |
ASTM B 502/B502M : 2010 : EDT 2
|
Standard Specification for Aluminum-Clad Steel Core Wire for Use in Overhead Electrical Aluminum Conductors |
GR 2949 CORE : ISSUE 1
|
GENERIC REQUIREMENTS FOR BURIED HYBRID COAXIAL/TWISTED PAIR CABLE |
ASTM B 33 : 2010
|
Standard Specification for Tin-Coated Soft or Annealed Copper Wire for Electrical Purposes |
SAE AMS 4700 : 2009
|
COPPER WIRE, BARE, HIGH PURITY |
ASTM B 236M : 2007 : R2015
|
Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) (Metric) (Withdrawn 2024) |
ASTM B 301/B301M : 2013 : REDLINE
|
Standard Specification for Free-Cutting Copper Rod, Bar, Wire, and Shapes |
SAE AMS 4501F : 2000(S2017)
|
COPPER SHEET, STRIP, AND PLATE, OXYGEN-FREE, LIGHT COLD ROLLED |
ASTM F 468M:2006
|
Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use [Metric] |
CSA C22.2 No. 130 : 2016
|
REQUIREMENTS FOR ELECTRICAL RESISTANCE TRACE HEATING AND HEATING DEVICE SETS |
ASTM B 324 : 2001 : R2007
|
Standard Specification for Aluminum Rectangular and Square Wire for Electrical Purposes |
ASTM B 706 : 2000 : R2011
|
Standard Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube |
ASTM B 75M : 1999 : R2005
|
Standard Specification for Seamless Copper Tube [Metric] |
ASTM B 230/B230M : 2007 : R2016
|
Standard Specification for Aluminum 1350–H19 Wire for Electrical Purposes |
ASTM B 47 : 1995 : REV A
|
Standard Specification for Copper Trolley Wire |
ASTM B 743 : 2012 : REDLINE
|
Standard Specification for Seamless Copper Tube in Coils |
ASTM B 8 : 2011 : R2017
|
Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft |
ASTM B 965 : 2009 : R2014
|
Standard Specification for High Performance Tin-Coated Annealed Copper Wire Intended for Electrical and Electronic Application for Solderability |
ASTM D 3353 : 2018 : REDLINE
|
Standard Test Methods for Fibrous-Insulated Magnet Wire |
ASTM B 189 : 2005 : R2015
|
Standard Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes |
ASTM F 1883 : 2003 : R2008
|
Standard Practice for Selection of Wire and Cable Size in AWG or Metric Units |
ASTM B 606/B606M : 2008 : R2016
|
Standard Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced |
ASTM B 1005 : 2017
|
Standard Specification for Copper-Clad Aluminum Bar for Electrical Purposes (Bus Bar) |
ASTM B 401 : 2012
|
Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/COMP) |
ASTM B 236 : 2007
|
Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) |
ASTM B 5 : 2016 : REDLINE
|
Standard Specification for High Conductivity Tough-Pitch Copper Refinery Shapes |
ASTM F 68 : 2016 : REDLINE
|
Standard Specification for Oxygen-Free Copper in Wrought Forms for Electron Devices |
ASTM B 236M : 2007
|
Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) [Metric] |
NEMA WC 55 : 1992(R1999)
|
INSTRUMENTATION CABLES AND THERMOCOUPLE WIRE |
ASTM B 116 : 1995 : R2017
|
Standard Specification for Figure-9 Deep-Grooved and Figure-8 Copper Trolley Wire for Industrial Haulage |
ASTM B 824 : 2017 : REDLINE
|
Standard Specification for General Requirements for Copper Alloy Castings |
ASTM B 48:2000
|
Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors |
ASTM B 609M : 1997
|
Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes [Metric] (Withdrawn 1999) |
MIL-STD-1537 Revision C:2002
|
Electrical Conductivity Test for Verification of Heat Treatment of Aluminum Alloys, Eddy Current Method |
ASTM B 957 : 2008
|
Standard Specification for Extra-High-Strength and Ultra-High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Overhead Electrical Conductors |
ASTM B 174 : 2017 : REDLINE
|
Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors |
SCTE 71 : 2008
|
SPECIFICATION FOR BRAIDED, 75 OHM, COAXIAL, MULTI-PURPOSE CABLE |
ASTM B 520 : 2012 : R2017
|
Standard Specification for Tin-Coated, Copper-Clad Steel Wire for Electronic Application |
MIL C 24643 : A
|
CABLES AND CORDS ELECTRIC, LOW SMOKE FOR SHIPBOARD USE, GENERAL SPECIFICATION FOR |
ASTM F 2249 : 2003
|
Standard Specification for In-Service Test Methods for Temporary Grounding Jumper Assemblies Used on De-Energized Electric Power Lines and Equipment |
ASTM B 170 : 1999 : R2010
|
Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes |
ASTM B 355 : 2011
|
Standard Specification for Nickel-Coated Soft or Annealed Copper Wire |
ASTM B 728 : 1984
|
Specification for Concentric-Lay-Stranded Aluminum-Alloy Conductors (Withdrawn 1988) |
MIL-DTL-915 Revision G:2002
|
Cable, Electrical, for Shipboard Use, General Specification for |
MIL-B-19231 Revision A:1972
|
BAR, COPPER, SILVER BEARING (FOR COMMUTATORS) |
ASTM A 947M : 2016 : REDLINE
|
Standard Specification for Textured Stainless Steel Sheet [Metric] |
ASTM F 468M : 2006 : EDT 1
|
Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use [Metric] |
ASTM B 447 : 2012 : REV A : REDLINE
|
Standard Specification for Welded Copper Tube |
ASTM B 973:2010
|
Standard Specification for Tin-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic Application |
ASTM B 624 : 2007 : R2012
|
Standard Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic Application |
ASTM B 452 : 2009
|
Standard Specification for Copper-Clad Steel Wire for Electronic Application |
ASTM B 399/B399M : 2004 : R2010
|
Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors |
SAE AMS 4500 : 2007
|
COPPER, SHEET, STRIP, AND PLATE, SOFT ANNEALED |
ASTM B 170 : 1999 : R2010 : EDT 1
|
Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes |
ASTM B 399/B399M : 2004 : R2015
|
Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors |
ASTM B 624 : 2007 : R2017
|
Standard Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic Application |
ASTM B 248 : 2017 : REDLINE
|
Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar |
ASTM B 75M : 1999
|
Standard Specification for Seamless Copper Tube [Metric] |
ASTM B 8 : 2011
|
Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft |
ASTM A 111 : 1999 : REV A : R2004 : EDT 1
|
Standard Specification for Zinc-Coated (Galvanized) "Iron" Telephone and Telegraph Line Wire |
ASTM B 901 : 2004 : R2015
|
Standard Specification for Compressed Round Stranded Aluminum Conductors Using Single Input Wire Construction |
ASTM B 398M : 1997
|
Standard Specification for Aluminum-Alloy 6201-T81 Wire for Electrical Purposes [Metric] (Withdrawn 1999) |
ASTM B 976 : 2011
|
Standard Specification for Fiber Reinforced Aluminum Matrix Composite (AMC) Core Wire for Aluminum Conductors, Composite Reinforced (ACCR) |
ASTM B 47 : 1995 : REV A : R2012
|
Standard Specification for Copper Trolley Wire |
NASA KSC SPEC E 0031 : 2008
|
CABLES, ELECTRICAL, SPECIFICATION FOR |
NASA KSC SPEC E 0024 : 2008
|
CABLE, ELECTRICAL, SHIELDED, JACKETED, FOR HARNESS ASSEMBLIES, GENERAL SPECIFICATION FOR |
ASTM B 465 : 2016 : REDLINE
|
Standard Specification for Copper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar |
ASTM B 451 : 1993
|
Specification for Copper Foil, Strip, and Sheet for Printed Circuits and Carrier Tapes (Withdrawn 1998) |
ASTM B 559 : 2012
|
Standard Specification for Nickel-Coated, Copper-Clad Steel Wire for Electronic Application |
ASTM B 706 : 2000 : R2006
|
Standard Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube |
ASTM B 75 : 2002
|
Standard Specification for Seamless Copper Tube |
DOD HDBK 270 : 0
|
METALLIC MATERIALS, MAGNETIC PERMEABILITY AND ELECTRICAL CONDUCTIVITY, CHARACTERISTICS OF (METRIC) |
BS EN ISO 15551-1:2015
|
Petroleum and natural gas industries. Drilling and production equipment Electric submersible pump systems for artificial lift |
ASTM B 230/B230M : 2007
|
Standard Specification for Aluminum 1350-H19 Wire for Electrical Purposes |
ASTM B 48 : 2000 : R2016
|
Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors |
SCTE 74 : 2011
|
SPECIFICATION FOR BRAIDED 75 OHM FLEXIBLE RF COAXIAL DROP CABLE |
MIL-HDBK-270 Revision A:1991
|
METALLIC MATERIALS FOR LOW MAGNETIC APPLICATIONS, MAGNETIC PERMEABILITY AND ELECTRICAL CONDUCTIVITY, CHARACTERISTICS OF (METRIC) |
ASTM B 286 : 2007 : R2012
|
Standard Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment |
ASTM B 173 : 2017 : REDLINE
|
Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors |
ASTM B 189 : 2005 : R2010
|
Standard Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes |
ASTM E 345 : 2016 : REDLINE
|
Standard Test Methods of Tension Testing of Metallic Foil |
ASTM B 972 : 2010
|
Standard Specification for Nickel-Coated Braid and Ribbon Flat Copper Wire Intended for use in Electronic Application |
ASTM B 116 : 1995 : R2007
|
Standard Specification for Figure-9 Deep-Grooved and Figure-8 Copper Trolly Wire for Industrial Haulage |
ASTM A 111 : 1999 : REV A : R2014
|
Standard Specification for Zinc-Coated (Galvanized) “Iron” Telephone and Telegraph Line Wire |
ASTM B 498/B498M : 2008 : R2016
|
Standard Specification for Zinc-Coated (Galvanized) Steel Core Wire for Use in Overhead Electrical Conductors |
ASTM B 501 : 2010 : R2015
|
Standard Specification for Silver-Coated, Copper-Clad Steel Wire for Electronic Application |
ASTM B 314 : 1990
|
Specification for Aluminum 1350 Wire for Communication Cable (Withdrawn 1994) |
SCTE 100 : 2010
|
SPECIFICATION FOR 75 OHM SMOOTH ALUMINUM SUBSCRIBER ACCESS CABLE |
ASTM B 227 : 2015 : REDLINE
|
Standard Specification for Hard-Drawn Copper-Clad Steel Wire |
ASTM A 111 : 1999 : REV A
|
Standard Specification for Zinc-Coated (Galvanized) "Iron" Telephone and Telegraph Line Wire |
ASTM B 355 : 2011 : R2016
|
Standard Specification for Nickel-Coated Soft or Annealed Copper Wire |
MIL-S-22215 Revision A:1968
|
SILVER-COPPER-CADMIUM-NICKEL-ALLOY |
ASTM B 233 : 1997 : R2003 : EDT 1
|
Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes |
13/30217541 DC : 0
|
BS EN ISO 15551-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: ELECTRIC SUBMERSIBLE PUMP SYSTEMS FOR ARTIFICIAL LIFT |
SAE J 1678 : 2015
|
LOW VOLTAGE ULTRA THIN WALL PRIMARY CABLE |
ASTM F 1883 : 2003
|
Standard Practice for Selection of Wire and Cable Size in AWG or Metric Units |
MIL C 24640 : A
|
CABLE, LIGHT WEIGHT, ELECTRIC, LOW SMOKE, FOR SHIPBOARD USE GENERAL SPECIFICATION FOR |
ASTM B 249M : 1994
|
SPECIFICATION FOR GENERAL REQUIREMENTS FOR WROUGHT COPPER AND COPPER ALLOY ROD, BAR, SHAPES AND FORGINGS (METRIC) |
QQ-W-343 Revision G:1997
|
WIRE, ELECTRICAL, COPPER (UNINSULATED) |
ASTM B 901 : 2004
|
Standard Specification for Compressed Round Stranded Aluminum Conductors Using Single Input Wire Construction |
ASTM B 233 : 1997 : R2007
|
Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes |
ASTM B 115 : 2010 : R2016
|
Standard Specification for Electrolytic Copper Cathode |
ASTM B 49 : 2017 : REDLINE
|
Standard Specification for Copper Rod for Electrical Purposes |
ASTM B 888/B888M : 2017 : REDLINE
|
Standard Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring Contacts |
ASTM B 971 : 2010 : R2014
|
Standard Specification for Silver-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic Application |
ASTM B 941 : 2016 : REDLINE
|
Standard Specification for Heat Resistant Aluminum-Zirconium Alloy Wire for Electrical Purposes |
IPC AM 372 : 1978
|
ELECTROLESS COPPER FILM FOR ADDITIVE PRINTED BOARDS, |
ASTM B 609/B609M : 2012
|
Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes |
SAE AMS 4011 : 2014
|
ALUMINUM, FOIL AND LIGHT GAGE SHEET, 99.45 AL (1145-0) ANNEALED |
ASTM F 1883 : 2003 : R2013
|
Standard Practice for Selection of Wire and Cable Size in AWG or Metric Units |
I.S. EN ISO 15551-1:2015
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: ELECTRIC SUBMERSIBLE PUMP SYSTEMS FOR ARTIFICIAL LIFT (ISO 15551-1:2015) |
ASTM B 747 : 2015 : REDLINE
|
Standard Specification for Copper-Zirconium Alloy Sheet and Strip |
ASTM B 324 : 2001 : R2016
|
Standard Specification for Aluminum Rectangular and Square Wire for Electrical Purposes |
ASTM F 2249 : 2003 : R2015
|
Standard Specification for In-Service Test Methods for Temporary Grounding Jumper Assemblies Used on De-Energized Electric Power Lines and Equipment |
ASTM B 609/B609M : 2012 : EDT 1
|
Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes |
ASTM B 324 : 2001 : R2012
|
Standard Specification for Aluminum Rectangular and Square Wire for Electrical Purposes |
ISO 15551-1:2015
|
Petroleum and natural gas industries — Drilling and production equipment — Part 1: Electric submersible pump systems for artificial lift |
09/30204364 DC : 0
|
BS EN 6104 - AEROSPACE SERIES - RIVETS, SOLID, IN ALUMINIUM OR ALUMINIUM ALLOY - INCH SERIES - TECHNICAL SPECIFICATION |
EN ISO 15551-1:2015
|
Petroleum and natural gas industries - Drilling and production equipment - Part 1: Electric submersible pump systems for artificial lift (ISO 15551-1:2015) |
ASTM B 189 : 2005
|
Standard Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes |
ASTM B 246 : 2015 : REDLINE
|
Standard Specification for Tinned Hard-Drawn and Medium-Hard-Drawn Copper Wire for Electrical Purposes |
ASTM B 75 : 2002 : R2010
|
Standard Specification for Seamless Copper Tube |
ASTM B 286 : 2007 : R2017
|
Standard Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment |
IEEE 515-2011
|
IEEE Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Industrial Applications |
ASTM B 231/B231M : 2016 : REDLINE
|
Standard Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors |
ASTM B 399/B399M : 2004
|
Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors |
ASTM B 324:2001
|
Standard Specification for Aluminum Rectangular and Square Wire for Electrical Purposes |
ASTM B 105 : 2005
|
Standard Specification for Hard-Drawn Copper Alloy Wires for Electric Conductors |
ASTM B 502/B502M : 2010 : R2017
|
Standard Specification for Aluminum-Clad Steel Core Wire for Use in Overhead Electrical Aluminum Conductors |
MIL-C-19311 Revision B:1973
|
COPPER CHROMIUM ALLOY FORGINGS, WROUGHT ROD, BAR AND STRIP (COPPER ALLOY NUMBERS 182, 184, AND 185) |
ASTM B 801 : 2018 : REDLINE
|
Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation |
ASTM B 248M : 2017 : REDLINE
|
Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar (Metric) |
ASTM B 250/B250M : 2016 : REDLINE
|
Standard Specification for General Requirements for Wrought Copper Alloy Wire |
SCTE 117 : 2010
|
SPECIFICATION FOR BRAIDED 75 OHMS, MINI-SERIES BROADBAND COAXIAL CABLE |
IEEE 515.1-2012
|
IEEE Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Commercial Applications |
SCTE 244 : 2018
|
SPECIFICATION FOR BRAIDED 75 OHMS, MICRO-SERIES QUAD SHIELD COAXIAL CABLE FOR CONNECTIVITY AND DENSE CCAP/EDGE QAM APPLICATIONS |
ASTM B 566 : 2004 : REV A
|
Standard Specification for Copper-Clad Aluminum Wire |
ASTM B 105 : 2005 : R2012
|
Standard Specification for Hard-Drawn Copper Alloy Wires for Electric Conductors |
ASTM B 63 : 2007 : R2018
|
Standard Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials |
ASTM B 452 : 2009 : R2015
|
Standard Specification for Copper-Clad Steel Wire for Electronic Application |
ASTM B 910/B910M : 2007
|
Standard Specification for Annealed Copper-Clad Steel Wire |
SAE AMS 7510C:2006(S2017)
|
Magnets, Rare-Earth/Cobalt, Permanent Powder-Metallurgy Product |
ASTM B 250M : 1995
|
Standard Specification for General Requirements for Wrought Copper Alloy Wire [Metric] (Withdrawn 2001) |
ASTM B 115 : 2010
|
Standard Specification for Electrolytic Copper Cathode |
ASTM B 803/B803M : 2008 : R2016
|
Standard Specification for High-Strength Zinc–5 % Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors |
ASTM B 976 : 2011 : R2015
|
Standard Specification for Fiber Reinforced Aluminum Matrix Composite (AMC) Core Wire for Aluminum Conductors, Composite Reinforced (ACCR) |
ASTM B 559 : 2012 : R2017
|
Standard Specification for Nickel-Coated, Copper-Clad Steel Wire for Electronic Application |
ASTM B 706 : 2000
|
Standard Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube |
ASTM B 624 : 2007
|
Standard Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic Application |
ASTM B 233 : 1997 : R2016
|
Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes |
ASTM B 116 : 1995 : R2001
|
Standard Specification for Figure-9 Deep-Grooved and Figure-8 Copper Trolly Wire for Industrial Haulage |
ASTM B 116 : 1995 : R2012
|
Standard Specification for Figure-9 Deep-Grooved and Figure-8 Copper Trolly Wire for Industrial Haulage |
ASTM B 63 : 2007
|
Standard Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials |
ASTM B 803/B803M : 2008 : EDT 1
|
Standard Specification for High-Strength Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors |
ASTM B 233 : 1997
|
Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes |
ASTM B 910/B910M : 2007 : R2013
|
Standard Specification for Annealed Copper-Clad Steel Wire |
ASTM B 172 : 2017 : REDLINE
|
Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors |
10/30233643 DC : 0
|
BS EN 6104 - AEROSPACE SERIES - RIVETS, SOLID, IN ALUMINIUM OR ALUMINIUM ALLOY - INCH SERIES - TECHNICAL SPECIFICATION |