ASTM D 3188 : 2006
|
Standard Test Methods for Rubber-Evaluation of IIR (Isobutene-Isoprene Rubber) |
ASTM D 1513 : 2005 : R2012
|
Standard Test Method for Carbon Black, Pelleted—Pour Density |
ASTM D 3616 : 1995 : R2000
|
Standard Test Method for Rubber, Raw-Determination of Gel, Swelling Index, and Dilute Solution Viscosity |
ASTM D 4572 : 1989 : R2005
|
Standard Test Method for Rubber Chemicals-Wet Sieve Analysis of Sulfur |
ASTM D 1514 : 2015 : REDLINE
|
Standard Test Method for Carbon Black—Sieve Residue |
ASTM D 5774 : 1995 : R2000
|
Standard Test Methods for Rubber From Synthetic Sources-Chemical Analysis of Extractables |
ASTM D 572 : 2004 : R2009
|
Standard Test Method for Rubber-Deterioration by Heat and Oxygen |
ASTM D 6284 : 2017 : REDLINE
|
Standard Test Method for Rubber Property—Effect of Aqueous Solutions with Available Chlorine and Chloramine |
ASTM D 4937 : 1996 : R2017
|
Standard Test Method for p-Phenylenediamine Antidegradants Purity by Gas Chromatography |
ASTM D 7771 : 2017-02
|
TEST METHOD FOR DETERMINATION OF BENZO-ALPHA-PYRENE (BAP) CONTENT IN CARBON BLACK |
ASTM D 5297 : 1995 : R2004
|
Standard Test Methods for Rubber Chemical Accelerator-Purity by High Performance Liquid Chromatography |
ASTM D 4934 : 2002 : R2012
|
Standard Test Method for Rubber Compounding Materials: 2-Benzothiazyl Sulfenamide Accelerators—Insolubles |
ASTM D 3186 : 2007 : R2011
|
Standard Test Methods for Rubber—Evaluation of SBR (Styrene-Butadiene Rubber) Mixed With Carbon Black or Carbon Black and Oil |
ASTM D 1993 : 2003 : R2013 : EDT 1
|
Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption |
ASTM D 4937 : 1996 : EDT 1
|
Standard Test Method for p-Phenylenediamine Antidegradants Purity by Gas Chromatography |
ASTM D 991 : 1989 : R2010
|
Standard Test Method for Rubber Property-Volume Resistivity Of Electrically Conductive and Antistatic Products |
ASTM D 4571 : 2006 : R2012
|
Standard Test Methods for Rubber Compounding Materials—Determination of Volatile Material |
ASTM D 624 : 2000 : EDT 1
|
Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers |
ASTM D 6370 : 1999 : R2003
|
Standard Test Method for Rubber-Compositional Analysis by Thermogravimetry (TGA) |
ASTM D 5670 : 1995 : R2004 : EDT 1
|
Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry |
ASTM D 991 : 1989 : R2000 : EDT 1
|
Standard Test Method for Rubber Property-Volume Resistivity Of Electrically Conductive and Antistatic Products |
ASTM D 1414 : 2015 : REDLINE
|
Standard Test Methods for Rubber O-Rings |
ASTM D 3189 : 2006
|
Standard Test Methods for Rubber-Evaluation of Solution BR (Polybutadiene Rubber) |
ASTM D 6370 : 1999
|
Standard Test Method for Rubber-Compositional Analysis by Thermogravimetry (TGA) |
ASTM D 1229 : 2003 : R2015
|
Standard Test Method for Rubber Property—Compression Set at Low Temperatures |
ASTM D 454 : 2004 : R2010
|
Standard Test Method for Rubber Deterioration by Heat and Air Pressure |
ASTM D 5712 : 2015 : REDLINE
|
Standard Test Method for Analysis of Aqueous Extractable Protein in Latex, Natural Rubber, and Elastomeric Products Using the Modified Lowry Method |
ASTM D 7724 : 2011
|
Standard Test Method for Carbon BlackNon-Dispersible Matter by Mechanical Flushing (NDM) |
ASTM D 5051 : 2006 : R2017
|
Standard Test Method for Rubber Compounding Materials—Benzothiazyl Disulfide (MBTS)—Assay |
ASTM D 3052 : 1987 : R1996
|
Standard Practice for Rating Water-Emulsion Floor Polishes |
ASTM D 624 : 2000
|
Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers |
ASTM D 3089 : 1997 : R2008
|
Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
ASTM D 4571 : 2006
|
Standard Test Methods for Rubber Compounding Materials—Determination of Volatile Material |
ASTM D 5044 : 2006 : R2017
|
Standard Test Method for Rubber Compounding Materials—Free 2-Mercaptobenzothiazole (MBT) in Benzothiazyl Disulfide (MBTS) |
ASTM D 3187 : 2006 : R2011
|
Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Rubber) |
ASTM D 1519 : 1995 : R2009 : EDT 1
|
Standard Test Method for Rubber Chemicals-Melting Range |
ASTM D 3189 : 2006 : R2016
|
Standard Test Methods for Rubber—Evaluation of Solution BR (Polybutadiene Rubber) |
ASTM D 4936 : 2010 : R2015
|
Standard Test Method for Mercaptobenzothiazole Sulfenamide Assay by Reduction/Titration |
ASTM D 5963 : 2004 : R2010
|
Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader) |
ASTM D 1511 : 2012
|
Standard Test Method for Carbon Black—Pellet Size Distribution |
ASTM D 1417 : 2016 : REDLINE
|
Standard Test Methods for Rubber Latices—Synthetic |
ASTM D 4934 : 2002 : R2017
|
Standard Test Method for Rubber Compounding Materials: 2-Benzothiazyl Sulfenamide Accelerators—Insolubles |
ASTM D 750 : 2012
|
Standard Practice for Rubber Deterioration Using Artificial Weathering Apparatus |
ASTM D 3314 : 2002 : R2017
|
Standard Test Method for Rubber—Chemical Analysis for Polystyrene Blocks In SBR (Styrene-Butadiene Rubber) and Styrene-Reinforced Latices |
ASTM D 6147 : 1997
|
Test Method for Vulcanized Rubber and Thermoplastic Elastomer-Determination of Force Decay (Stress Relaxation) in Compression |
ASTM D 3190 : 2006 : R2010
|
Standard Test Method for Rubber-Evaluation of Chloroprene Rubber (CR) |
ASTM D 5774 : 1995 : R2014
|
Standard Test Methods for Rubber—Chemical Analysis of Extractables |
ASTM D 3484 : 2006 : R2016
|
Standard Test Methods for Rubber—Evaluation of Oil-Extended Solution BR (Polybutadiene Rubber) |
ASTM D 4820 : 1999
|
Standard Test Methods for Carbon Black-Surface Area by Multipoint B.E.T. Nitrogen Adsorption (Withdrawn 2000) |
ASTM D 380 : 1994 : R2012
|
Standard Test Methods for Rubber Hose |
ASTM D 5297 : 1995 : R2014
|
Standard Test Methods for Rubber Chemical Accelerator—Purity by High Performance Liquid Chromatography |
ASTM D 3568 : 2003 : R2013
|
Standard Test Methods for Rubber—Evaluation of EPDM (Ethylene Propylene Diene Terpolymers) Including Mixtures With Oil |
ASTM D 4572 : 1989 : R2017
|
Standard Test Method for Rubber Chemicals—Wet Sieve Analysis of Sulfur |
ASTM D 6600 : 2000
|
Standard Practice for Evaluating Test Sensitivity for Rubber Test Methods |
ASTM D 297 : 2015 : REDLINE
|
Standard Test Methods for Rubber Products—Chemical Analysis |
ASTM D 4578 : 2006
|
Standard Test Methods for Rubber Chemicals—Determination of Percent Sulfur by Extraction |
ASTM D 1506 : 2015 : REDLINE
|
Standard Test Methods for Carbon Black—Ash Content |
ASTM D 1513 : 2005 : EDT 1
|
Standard Test Method for Carbon Black, Pelleted—Pour Density |
ASTM D 3189 : 2006 : R2011
|
Standard Test Methods for Rubber—Evaluation of Solution BR (Polybutadiene Rubber) |
ASTM D 380 : 1994 : R2006
|
Standard Test Methods for Rubber Hose |
ASTM F 1806 : 2014 : REDLINE
|
Standard Practice for Tire Testing Operations–Basic Concepts and Terminology for Reference Tire Use |
ASTM D 4004 : 2006 : R2012
|
Standard Test Methods for Rubber—Determination of Metal Content by Flame Atomic Absorption (AAS) Analysis |
ASTM D 6124 : 2006
|
Standard Test Method for Residual Powder on Medical Gloves |
ASTM D 378 : 2010 : R2016
|
Standard Test Methods for Rubber (Elastomeric) Conveyor Belting, Flat Type |
ASTM D 1993 : 2003 : R2008
|
Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption |
ASTM D 1416 : 1989
|
Test Methods for Rubber from Synthetic Sources--Chemical Analysis (Withdrawn 1996) |
ASTM D 5051 : 2006
|
Standard Test Method for Rubber Compounding Materials—Benzothiazyl Disulfide (MBTS)—Assay |
ASTM D 1278 : 1991 : REV A : R2007
|
Standard Test Methods for Rubber from Natural Sources—Chemical Analysis |
ASTM D 5774 : 1995 : R2004 : EDT 1
|
Standard Test Methods for Rubber From Synthetic Sources-Chemical Analysis of Extractables |
ASTM D 6746 : 2015 : REDLINE
|
Standard Test Method for Determination of Green Strength and Stress Relaxation of Raw Rubber or Unvulcanized Compounds |
ASTM D 5670 : 1995 : R2009
|
Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry |
ASTM D 6845 : 2018 : REDLINE
|
Standard Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area |
ASTM D 3533 : 2005
|
Standard Test Method for Rubber-Nitrogen Content (Withdrawn 2006) |
ASTM D 430 : 2006 : EDT 1
|
Standard Test Methods for Rubber Deterioration-Dynamic Fatigue |
ASTM D 5289 : 2017 : REDLINE
|
TEST METHOD FOR RUBBER PROPERTY - VULCANIZATION USING ROTORLESS CURE METERS |
ASTM D 7558 : 2009
|
Standard Test Method for Colorimetric/Spectrophotometric Procedure to Quantify Extractable Chemical Dialkyldithiocarbamate, Thiuram, and Mercaptobenzothiazole Accelerators in Natural Rubber Latex and Nitrile Gloves |
ASTM D 5603 : 2001
|
Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber |
ASTM D 1278 : 1991 : REV A : R2015
|
Standard Test Methods for Rubber from Natural Sources—Chemical Analysis |
ASTM D 4578 : 2006 : R2012
|
Standard Test Methods for Rubber Chemicals—Determination of Percent Sulfur by Extraction |
ASTM D 531 : 2015 : REDLINE
|
Standard Test Method for Rubber Property—Pusey and Jones Indentation |
ASTM D 6147 : 1997 : R2008 : EDT 1
|
Standard Test Method for Vulcanized Rubber and Thermoplastic Elastomer—Determination of Force Decay (Stress Relaxation) in Compression |
ASTM D 5051 : 2006 : R2012
|
Standard Test Method for Rubber Compounding Materials—Benzothiazyl Disulfide (MBTS)—Assay |
ASTM D 5666 : 1995 : R2014
|
Standard Test Method for Rubber Chemical Antidegradants—Purity of p -Phenylenediamine (PPD) Antidegradants by High Performance Liquid Chromatography |
ASTM D 751 : 2006 : R2011
|
Standard Test Methods for Coated Fabrics |
ASTM D 4569 : 2006 : R2012
|
Standard Test Method for Rubber Compounding Materials—Determination of Acidity in Sulfur |
ASTM D 1519 : 1995 : R2004 : EDT 1
|
Standard Test Method for Rubber Chemicals-Melting Range |
ASTM D 624 : 2000 : R2007
|
Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers |
ASTM D 3952 : 1987 : R1993
|
Specification for Rubber Hose Used in Solar Energy Systems (Withdrawn 1997) |
ASTM D 3190 : 2006 : R2016
|
Standard Test Method for Rubber—Evaluation of Chloroprene Rubber (CR) |
ASTM D 6085 : 1997 : R2016
|
Standard Practice for Sampling in Rubber Testing—Terminology and Basic Concepts |
ASTM D 1917 : 2003 : R2012
|
Standard Test Methods for Rubber Property—Shrinkage of Raw and Compounded Hot-Polymerized Styrene-Butadiene Rubber (SBR) |
ASTM D 6600 : 2000 : R2017
|
Standard Practice for Evaluating Test Sensitivity for Rubber Test Methods |
ASTM D 991 : 1989 : R2005
|
Standard Test Method for Rubber Property-Volume Resistivity Of Electrically Conductive and Antistatic Products |
ASTM D 5297 : 1995 : R2009
|
Standard Test Methods for Rubber Chemical Accelerator-Purity by High Performance Liquid Chromatography |
ASTM D 4937 : 1996 : R2012
|
Standard Test Method for p-Phenylenediamine Antidegradants Purity by Gas Chromatography |
ASTM D 5376 : 2006 : R2017
|
Standard Test Method for Rubber Compounding Materials—Determination of the Basic Nitrogen Content in Rubber Antioxidant: Polymerized TMQ |
ASTM D 573 : 2004
|
Standard Test Method for Rubber—Deterioration in an Air Oven |
ASTM D 575 : 1991 : R2001
|
Standard Test Methods for Rubber Properties in Compression |
ASTM D 3958 : 2006 : R2016
|
Standard Test Methods for Rubber—Evaluation of BIIR and CIIR (Halogenated Isobutene—Isoprene Rubber) |
ASTM D 3190 : 2006
|
Standard Test Method for Rubber-Evaluation of Chloroprene Rubber (CR) |
ASTM D 813 : 2007 : R2014
|
Standard Test Method for Rubber Deterioration—Crack Growth |
ASTM D 6049 : 2003 : R2008
|
Standard Test Method for Rubber Property-Measurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates |
ASTM D 6515 : 2000 : R2009
|
Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending |
ASTM F 1957 : 1999 : R2017
|
Standard Test Method for Composite Foam Hardness-Durometer Hardness |
ASTM D 6124 : 2006 : R2017
|
Standard Test Method for Residual Powder on Medical Gloves |
ASTM D 2228 : 2004 : R2009
|
Standard Test Method for Rubber Property-Relative Abrasion Resistance by the Pico Abrader Method |
ASTM D 3186 : 2007 : R2016
|
Standard Test Methods for Rubber—Evaluation of SBR (Styrene-Butadiene Rubber) Mixed With Carbon Black or Carbon Black and Oil |
ASTM D 3848 : 2003 : R2018
|
Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Copolymers) Mixed With Carbon Black |
ASTM D 3346 : 2017 : REDLINE
|
Standard Test Methods for Rubber Property—Processability of Emulsion SBR (Styrene-Butadiene Rubber) With the Mooney Viscometer (Delta Mooney) |
ASTM C 1187 : 2015 : REDLINE
|
Standard Guide for Establishing Surveillance Test Program for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Fuel Storage Racks In a Pool Environment |
ASTM D 4934 : 2002 : R2006
|
Standard Test Method for Rubber Compounding Materials: 2-Benzothiazyl Sulfenamide Accelerators-Insolubles |
ASTM D 5902 : 2005
|
Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value |
ASTM D 575 : 1991 : R1996
|
Standard Test Methods for Rubber Properties in Compression |
ASTM D 7724 : 2011 : R2016
|
Standard Test Method for Carbon Black—Non-Dispersible Matter by Mechanical Flushing (NDM) |
ASTM D 4569 : 2006
|
Standard Test Method for Rubber Compounding Materials—Determination of Acidity in Sulfur |
ASTM D 5775 : 1995 : R2014
|
Standard Test Method for Rubber—Determination of Bound Styrene in Styrene Butadiene Rubber by Refractive Index |
ASTM D 751 : 2006
|
Standard Test Methods for Coated Fabrics |
ASTM D 1917 : 2003 : R2007
|
Standard Test Methods for Rubber Property—Shrinkage of Raw and Compounded Hot-Polymerized Styrene-Butadiene Rubber (SBR) |
ASTM D 430 : 2006 : R2012
|
Standard Test Methods for Rubber Deterioration—Dynamic Fatigue |
ASTM D 1511 : 2012 : R2017
|
Standard Test Method for Carbon Black—Pellet Size Distribution |
ASTM D 3958 : 2006 : R2011
|
Standard Test Methods for Rubber—Evaluation of BIIR and CIIR (Halogenated Isobutene—Isoprene Rubber) |
ASTM D 2084 : 2017 : REDLINE
|
TEST METHOD FOR RUBBER PROPERTY - VULCANIZATION USING OSCILLATING DISK CURE METER |
ASTM D 3568 : 2003 : R2009
|
Standard Test Methods for Rubber—Evaluation of EPDM (Ethylene Propylene Diene Terpolymers) Including Mixtures With Oil |
ASTM D 5099 : 2008 : R2017
|
Standard Test Methods for Rubber—Measurement of Processing Properties Using Capillary Rheometry |
ASTM D 3616 : 1995 : R2009
|
Standard Test Method for Rubber, Raw-Determination of Gel, Swelling Index, and Dilute Solution Viscosity |
ASTM D 6600 : 2000 : R2004
|
Standard Practice for Evaluating Test Sensitivity for Rubber Test Methods |
ASTM D 6600 : 2000 : EDT 1
|
Standard Practice for Evaluating Test Sensitivity for Rubber Test Methods |
ASTM D 1510 : 2017-11
|
TEST METHOD FOR CARBON BLACK - IODINE ADSORPTION NUMBER |
ASTM D 5963 : 2004 : R2010 : EDT 1
|
Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader) |
ASTM D 345 : 2002
|
Side bearings of the freight wagon bogies. General specifications |
AASHTO R 63 : 2013
|
PRACTICE FOR SOLID WALL HIGH-DENSITY POLYETHYLENE (HDPE) CONDUIT FOR NON-PRESSURE APPLICATIONS USED FOR THE PROTECTION OF POWER AND TELECOMMUNICATIONS CABLES |
ASTM D 623 : 2007
|
Standard Test Methods for Rubber Property—Heat Generation and Flexing Fatigue In Compression |
ASTM D 1415 : 2006 : R2012
|
Standard Test Method for Rubber Property—International Hardness |
ASTM D 7605 : 2011 : R2016
|
Standard Test Method for Thermoplastic Elastomers—Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers |
ASTM D 2228 : 2004 : EDT 1
|
Standard Test Method for Rubber Property-Relative Abrasion Resistance by the Pico Abrader Method |
SAE J 2979 : 2012
|
TEST METHOD FOR VULCANIZED RUBBER AND THERMOPLASTIC ELASTOMER DETERMINATION OF COMPRESSIVE STRESS RELAXATION (CSR) RESPONSE |
ASTM D 4936 : 2010
|
Standard Test Method for Mercaptobenzothiazole Sulfenamide Assay by Reduction/Titration |
ASTM D 4569 : 2006 : R2017
|
Standard Test Method for Rubber Compounding Materials—Determination of Acidity in Sulfur |
ASTM D 4004 : 2006 : R2017
|
Standard Test Methods for Rubber—Determination of Metal Content by Flame Atomic Absorption (AAS) Analysis |
ASTM D 1329 : 2016 : REDLINE
|
Standard Test Method for Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test) |
ASTM D 3187 : 2006
|
Standard Test Methods for Rubber-Evaluation of NBR (Acrylonitrile-Butadiene Rubber) |
ASTM D 1278 : 1991 : REV A : R2002
|
Standard Test Methods for Rubber from Natural Sources-Chemical Analysis |
ASTM D 1991 : 2015 : REDLINE
|
Standard Test Method for Rubber Chemicals—2-Mercaptobenzothiazole (MBT)—Assay |
ASTM D 1508 : 2012
|
Standard Test Method for Carbon Black, Pelleted Fines and Attrition |
ASTM D 7427 : 2016 : REDLINE
|
Standard Test Method for Immunological Measurement of Four Principal Allergenic Proteins (Hev b 1, 3, 5 and 6.02) in Hevea Natural Rubber and Its Products Derived from Latex |
ASTM D 5902 : 2005 : EDT 1
|
Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value |
ASTM D 1415 : 2006
|
Standard Test Method for Rubber Property—International Hardness |
ASTM D 3958 : 2006
|
Standard Test Methods for Rubber-Evaluation of BIIR and CIIR (Halogenated Isobutene-Isoprene Rubber) |
ASTM D 6124 : 2006 : R2011
|
Standard Test Method for Residual Powder on Medical Gloves |
ASTM D 1513 : 2005
|
Standard Test Method for Carbon Black, Pelleted—Pour Density |
ASTM D 926 : 2017 : REDLINE
|
Standard Test Method for Rubber Property—Plasticity and Recovery (Parallel Plate Method) |
GOST R 52714:2018
|
Motor gasolines. Determination of individual and group hydrocarbon composition by capillary gas сhromatography method |
ASTM D 2632 : 2015 : REDLINE
|
Standard Test Method for Rubber Property—Resilience by Vertical Rebound |
ASTM D 1278 : 1991 : REV A : R1997 : EDT 1
|
Standard Test Methods for Rubber from Natural Sources-Chemical Analysis |
ASTM D 3045 : 1992 : R1997
|
Standard Practice for Heat Aging of Plastics Without Load |
ASTM D 6924 : 2003 : R2007
|
Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges |
ASTM D 454 : 2004 : R2015
|
Standard Test Method for Rubber Deterioration by Heat and Air Pressure |
ASTM D 5376 : 2006 : R2012
|
Standard Test Method for Rubber Compounding Materials—Determination of the Basic Nitrogen Content in Rubber Antioxidant: Polymerized TMQ |
ASTM D 5054 : 1990 : R2004 : EDT 1
|
Standard Test Method for Rubber Chemicals-Diphenyl Guanidine (DPG) and Di-o-tolyl-guanidine (DOTG) Assay |
ASTM D 5044 : 2006 : R2012
|
Standard Test Method for Rubber Compounding Materials—Free 2-Mercaptobenzothiazole (MBT) in Benzothiazyl Disulfide (MBTS) |
ASTM D 1519 : 1995 : R2000
|
Standard Test Method for Rubber Chemicals-Melting Range |
ASTM D 378 : 2010
|
Standard Test Methods for Rubber (Elastomeric) Conveyor Belting, Flat Type |
ASTM D 7679 : 2016 : REDLINE
|
Standard Test Method for Sulfur Content in Carbon Black Feedstock Oils |
ASTM D 5297 : 1995 : R2000
|
Standard Test Methods for Rubber Chemical Accelerator-Purity by High Performance Liquid Chromatography |
ASTM D 1513 : 2005 : EDT 2
|
Standard Test Method for Carbon Black, Pelleted—Pour Density |
ASTM D 4026 : 2006 : R2012
|
Standard Test Method for Rubber Latex—Styrene-Butadiene Copolymer—Determination of Residual Styrene |
ASTM D 1053 : 1992 : REV A : R2012
|
Standard Test Methods for Rubber Property—Stiffening at Low Temperatures: Flexible Polymers and Coated Fabrics |
ASTM D 1053 : 1992 : REV A : R2007
|
Standard Test Methods for Rubber Property-Stiffening at Low Temperatures: Flexible Polymers and Coated Fabrics |
ASTM D 3191 : 2010
|
Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)—Recipe and Evaluation Procedures |
ASTM F 421 : 2015 : REDLINE
|
Standard Test Method for Measuring Groove and Void Depth in Passenger Car Tires |
ASTM D 7662 : 2015 : REDLINE
|
Standard Test Method for Carbon Content in Carbon Black Feedstock Oils |
ASTM D 5054 : 1990 : R2009
|
Standard Test Method for Rubber Chemicals-Diphenyl Guanidine (DPG) and Di-o-tolyl-guanidine (DOTG) Assay |
ASTM D 6049 : 2003
|
Standard Test Method for Rubber Property—Measurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates |
ASTM D 4937 : 1996 : R2006 : EDT 1
|
Standard Test Method forp-Phenylenediamine Antidegradants Purity by Gas Chromatography |
ASTM D 1076 : 2015 : REDLINE
|
Standard Specification for Rubber—Concentrated, Ammonia Preserved, Creamed, and Centrifuged Natural Latex |
ASTM D 6600 : 2000 : EDT 2
|
Standard Practice for Evaluating Test Sensitivity for Rubber Test Methods |
ASTM D 7121 : 2005
|
Standard Test Method for Rubber Property-Resilience Using Schob Type Rebound Pendulum |
ASTM D 4574 : 2006 : R2012
|
Standard Test Methods for Rubber Compounding Materials—Determination of Ash Content |
ASTM D 1508 : 2012 : R2017
|
Standard Test Method for Carbon Black, Pelleted Fines and Attrition |
ASTM D 7558 : 2009 : R2014
|
Standard Test Method for Colorimetric/Spectrophotometric Procedure to Quantify Extractable Chemical Dialkyldithiocarbamate, Thiuram, and Mercaptobenzothiazole Accelerators in Natural Rubber Latex and Nitrile Gloves |
ASTM D 5666 : 1995 : R2009
|
Standard Test Method for P-Phenylenediamine Antidegradants-Purity by High Performance Liquid Chromatography |
ASTM D 865 : 2011
|
Standard Test Method for RubberDeterioration by Heating in Air (Test Tube Enclosure) |
ASTM D 6281 : 2015 : REDLINE
|
Standard Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM) |
ASTM D 6924 : 2003 : R2012
|
Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges |
ASTM D 4075 : 2006 : R2012
|
Standard Test Methods for Rubber Compounding Materials—Flame Atomic Absorption Analysis—Determination of Metals |
ASTM D 1917 : 2003
|
Standard Test Methods for Rubber Property—Shrinkage of Raw and Compounded Hot-Polymerized Styrene-Butadiene Rubber (SBR) |
ASTM D 3568 : 2003
|
Standard Test Methods for Rubber—Evaluation of EPDM (Ethylene Propylene Diene Terpolymers) Including Mixtures With Oil |
ASTM D 750 : 2012 : R2017
|
Standard Practice for Rubber Deterioration Using Artificial Weathering Apparatus |
ASTM D 3492 : 2016 : REDLINE
|
Standard Specification for Rubber Contraceptives (Male Condoms) |
ASTM D 3056 : 2005 : R2010
|
Standard Test Method for Gel Time of Solventless Varnishes |
ASTM D 572 : 2004 : R2015
|
Standard Test Method for Rubber—Deterioration by Heat and Oxygen |
ASTM D 4482 : 2011 : R2017
|
Standard Test Method for Rubber Property—Extension Cycling Fatigue |
ASTM D 6049 : 2003 : R2017
|
Standard Test Method for Rubber Property—Measurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates |
ASTM D 575 : 1991 : R2007
|
Standard Test Methods for Rubber Properties in Compression |
ASTM D 5775 : 1995 : R2000
|
Standard Test Method for Rubber from Synthetic Sources-Bound Styrene in SBR |
ASTM D 5054 : 1990 : R2014
|
Standard Test Method for Rubber Chemicals—Diphenyl Guanidine (DPG) and Di-o-tolyl-guanidine (DOTG) Assay (Withdrawn 2018) |
ASTM F 414 : 2015 : REDLINE
|
Standard Test Method for Energy Absorbed by a Tire When Deformed by Slow-Moving Plunger |
ASTM D 5963 : 2004
|
Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader) |
ASTM D 1519 : 1995 : R2009
|
Standard Test Method for Rubber Chemicals-Melting Range |
ASTM D 3185 : 2006 : R2016
|
Standard Test Methods for Rubber—Evaluation of SBR (Styrene-Butadiene Rubber) Including Mixtures With Oil |
ASTM D 3185 : 2006
|
Standard Test Methods for Rubber-Evaluation of SBR (Styrene-Butadiene Rubber) Including Mixtures With Oil |
ASTM D 6085 : 1997 : R2006
|
Standard Practice for Sampling in Rubber Testing-Terminology and Basic Concepts |
ASTM D 4574 : 2006 : R2017
|
Standard Test Methods for Rubber Compounding Materials—Determination of Ash Content |
ASTM D 1053 : 1992 : REV A : R2001 : EDT 1
|
Standard Test Methods for Rubber Property—Stiffening at Low Temperatures Flexible Polymers and Coated Fabrics |
ASTM D 3765 : 2004
|
Standard Test Method for Carbon Black—CTAB (Cetyltrimethylammonium Bromide) Surface Area (Withdrawn 2007) |
ASTM D 5666 : 1995 : R2004 : EDT 1
|
Standard Test Method for P-Phenylenediamine Antidegradants-Purity by High Performance Liquid Chromatography |
ASTM D 380 : 1994 : R2000
|
Standard Test Methods for Rubber Hose |
ASTM D 3186 : 2007
|
Standard Test Methods for Rubber—Evaluation of SBR (Styrene-Butadiene Rubber) Mixed With Carbon Black or Carbon Black and Oil |
ASTM D 572 : 2004 : R2010
|
Standard Test Method for Rubber-Deterioration by Heat and Oxygen |
ASTM D 3037 : 1993
|
Standard Test Methods for Carbon Black—Surface Area by Nitrogen Adsorption (Withdrawn 1999) |
ASTM D 573 : 2004 : R2015
|
Standard Test Method for Rubber—Deterioration in an Air Oven |
ASTM D 5099 : 2008
|
Standard Test Methods for Rubber—Measurement of Processing Properties Using Capillary Rheometry |
ASTM D 5603 : 2001 : R2008
|
Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber |
ASTM D 5902 : 2005 : R2010
|
Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value |
ASTM D 4572 : 1989 : R2012
|
Standard Test Method for Rubber Chemicals—Wet Sieve Analysis of Sulfur |
ASTM F 1957 : 1999
|
Standard Test Method for Composite Foam Hardness-Durometer Hardness |
ASTM D 4573 : 2003 : R2009
|
Standard Test Method for Rubber Chemicals—Determination of Oil Content in Oil-Treated Sulfur |
ASTM D 1519 : 1995 : R2014
|
Standard Test Methods for Rubber Chemicals—Determination of Melting Range |
ASTM D 573 : 2004 : R2010
|
Standard Test Method for Rubber—Deterioration in an Air Oven |
ASTM D 5099 : 2008 : R2013
|
Standard Test Methods for Rubber—Measurement of Processing Properties Using Capillary Rheometry |
ASTM F 1957 : 1999 : R2011
|
Standard Test Method for Composite Foam Hardness-Durometer Hardness |
ASTM D 6085 : 1997
|
Standard Practice for Sampling in Rubber Testing--Terminology and Basic Concepts |
ASTM D 3848 : 2003
|
Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Copolymers) Mixed With Carbon Black |
ASTM ES 27 : 1994
|
Practice for Rubber-Establishing Replacement Immersion Reference Oils for ASTM No. 2 and No. 3 Imersion Oils as Used in D-471 ( Withdrawn 1995) |
ASTM D 3403 : 2007 : R2016
|
Standard Test Methods for Rubber—Evaluation of IR (Isoprene Rubber) |
ASTM D 5775 : 1995 : R2009 : EDT 1
|
Standard Test Method for Rubber—Determination of Bound Styrene in Styrene Butadiene Rubber by Refractive Index |
ASTM D 1993 : 2003
|
Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption |
ASTM D 945 : 2016 : REDLINE
|
Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph) |
ASTM D 4075 : 2006
|
Standard Test Methods for Rubber Compounding Materials—Flame Atomic AbsorptionAnalysis—Determination of Metals |
ASTM D 6370 : 1999 : R2009
|
Standard Test Method for Rubber-Compositional Analysis by Thermogravimetry (TGA) |
ISO 19983:2017
|
Rubber — Determination of precision of test methods |
ASTM D 4004 : 2006
|
Standard Test Methods for Rubber—Determination of Metal Content by Flame Atomic Absorption (AAS) Analysis |
ASTM D 3484 : 2006 : R2010
|
Standard Test Methods for Rubber—Evaluation of Oil-Extended Solution BR (Polybutadiene Rubber) |
ASTM D 5603 : 2001 : R2015
|
Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber |
ASTM D 6924 : 2003
|
Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges |
ASTM D 5963 : 2004 : R2015
|
Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader) |
ASTM D 3568 : 2003 : R2018
|
Standard Test Methods for Rubber—Evaluation of EPDM (Ethylene Propylene Diene Terpolymers) Including Mixtures With Oil |
ASTM D 5376 : 2006
|
Standard Test Method for Rubber Compounding Materials—Determination of the Basic Nitrogen Content in Rubber Antioxidant: Polymerized TMQ |
ASTM D 1513 : 2005 : R2017
|
Standard Test Method for Carbon Black, Pelleted—Pour Density |
ASTM D 2228 : 2004
|
Standard Test Method for Rubber Property-Relative Abrasion Resistance by the Pico Abrader Method |
ASTM D 430 : 2006
|
Standard Test Methods for Rubber Deterioration-Dynamic Fatigue |
ASTM D 3188 : 2006 : R2010
|
Standard Test Methods for Rubber-Evaluation of IIR (Isobutene-Isoprene Rubber) |
ASTM D 7605 : 2011
|
Standard Test Method for Thermoplastic ElastomersMeasurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers |
ASTM D 5775 : 1995 : R2004 : EDT 1
|
Standard Test Method for Rubber from Synthetic Sources-Bound Styrene in SBR |
ASTM D 4578 : 2006 : R2017
|
Standard Test Methods for Rubber Chemicals—Determination of Percent Sulfur by Extraction |
ASTM D 624 : 2000 : R2012
|
Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers |
ASTM D 6515 : 2000 : R2016
|
Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending |
ASTM D 4934 : 2002
|
Standard Test Method for Rubber Compounding Materials: 2-Benzothiazyl Sulfenamide Accelerators—Insolubles |
ASTM D 3314 : 2002 : R2006
|
Standard Test Method for Rubber-Chemical Analysis for Polystyrene Blocks In SBR (Styrene-Butadiene Rubber) and Styrene-Reinforced Latices |
ASTM D 5775 : 1995 : R2009
|
Standard Test Method for Rubber from Synthetic Sources-Bound Styrene in SBR |
ASTM D 7772 : 2015 : REDLINE
|
Standard Test Method for Carbon Black Extractables – Absorbance of Cyclohexane Extract |
ASTM F 1112 : 2006 : REV A
|
Standard Test Method for Static Testing of Tubeless Pneumatic Tires for Rate of Loss of Inflation Pressure |
ASTM D 3187 : 2006 : R2016
|
Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Rubber) |
ASTM D 2703 : 1995
|
Standard Practice for Rubber Chemicals-Determination of Ultraviolet Absorbance Characteristics (Withdrawn 2000) |
ASTM D 1229 : 2003
|
Standard Test Method for Rubber Property—Compression Set at Low Temperatures |
ASTM D 3185 : 2006 : R2010
|
Standard Test Methods for Rubber-Evaluation of SBR (Styrene-Butadiene Rubber) Including Mixtures With Oil |
ASTM F 1957 : 1999 : R2004
|
Standard Test Method for Composite Foam Hardness-Durometer Hardness |
ASTM D 623 : 2007 : R2014
|
Standard Test Methods for Rubber Property—Heat Generation and Flexing Fatigue In Compression |
ASTM D 6924 : 2003 : R2017
|
Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges |
ASTM D 6515 : 20001
|
Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending |
ASTM D 1917 : 2003 : R2017
|
Standard Test Methods for Rubber Property—Shrinkage of Raw and Compounded Hot-Polymerized Styrene-Butadiene Rubber (SBR) |
GOST 849:2018
|
Primary nickel. SpecificationsE |
ASTM D 6049 : 2003 : R2013
|
Standard Test Method for Rubber Property—Measurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates |
ASTM D 3900 : 2017 : REDLINE
|
Standard Test Methods for Rubber—Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry |
ASTM D 3848 : 2003 : R2009
|
Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Copolymers) Mixed With Carbon Black |
ASTM D 4572 : 1989
|
TEST METHOD FOR RUBBER CHEMICALS - WET SIEVE ANALYSIS OF SULFUR |
ASTM D 6515 : 2000 : R2010
|
Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending |
ASTM D 1630 : 2016 : REDLINE
|
Standard Test Method for Rubber Property—Abrasion Resistance (Footwear Abrader) |
ASTM D 3192 : 2009
|
Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber) |
ASTM D 4482 : 2011
|
Test Method for Rubber PropertyExtension Cycling Fatigue |
BS ISO 19983:2017
|
Rubber. Determination of precision of test methods |
ASTM D 3484 : 2006
|
Standard Test Methods for Rubber—Evaluation of Oil-Extended Solution BR (Polybutadiene Rubber) |
ASTM D 572 : 2004
|
Standard Test Method for Rubber-Deterioration by Heat and Oxygen |
API 6J : 1992
|
BULLETIN ON TESTING OF OILFIELD ELASTOMERS - A TUTORIAL |
ASTM D 3314 : 2002 : R2012
|
Standard Test Method for Rubber—Chemical Analysis for Polystyrene Blocks In SBR (Styrene-Butadiene Rubber) and Styrene-Reinforced Latices |
ASTM D 5670 : 1995 : R2014
|
Standard Test Method for Rubber—Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry |
ASTM D 5054 : 1990 : R2000
|
Standard Test Method for Rubber Chemicals-Diphenyl Guanidine (DPG) and Di-o-tolyl-guanidine (DOTG) Assay |
ASTM D 5668 : 2009
|
Standard Test Methods for Rubber From Synthetic Sources-Volatile Matter |
ASTM D 3403 : 2007 : R2011
|
Standard Test Methods for Rubber—Evaluation of IR (Isoprene Rubber) |
ASTM D 4026 : 2006 : R2017
|
Standard Test Method for Rubber Latex—Styrene-Butadiene Copolymer—Determination of Residual Styrene |
ASTM D 4937 : 1996 : R2001
|
Standard Test Method for p-Phenylenediamine Antidegradants Purity by Gas Chromatography |
ASTM D 575 : 1991 : R2012
|
Standard Test Methods for Rubber Properties in Compression |
ASTM D 813 : 2007
|
Standard Test Method for Rubber Deterioration-Crack Growth |
ASTM D 471 : 2016-02
|
TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
ASTM D 5308 : 1992
|
Methods of Testing Semi-Flexible Cellular Urethanes for Automotive and Similar Energy Absorption Applications (Withdrawn 1998) |
ASTM D 6370 : 1999 : R2014
|
Standard Test Method for Rubber—Compositional Analysis by Thermogravimetry (TGA) |
ASTM D 5964 : 2016 : REDLINE
|
Standard Practice for Rubber IRM 901, IRM 902, and IRM 903 Replacement Oils for ASTM No. 1, ASTM No. 2, ASTM No. 3 Oils, and IRM 905 formerly ASTM No. 5 Oil |
ASTM D 1278 : 1991 : REV A : R2011
|
Standard Test Methods for Rubber from Natural Sources—Chemical Analysis |
ASTM D 6085 : 1997 : R2002
|
Standard Practice for Sampling in Rubber Testing—Terminology and Basic Concepts |
ASTM D 3403 : 2007
|
Standard Test Methods for Rubber—Evaluation of IR (Isoprene Rubber) |
ASTM D 6147 : 1997 : R2014
|
Standard Test Method for Vulcanized Rubber and Thermoplastic Elastomer—Determination of Force Decay (Stress Relaxation) in Compression |
ASTM D 3192 : 2009 : R2014
|
Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber) |
ASTM D 6600 : 2000 : R2013
|
Standard Practice for Evaluating Test Sensitivity for Rubber Test Methods |
ASTM D 1993 : 2003 : R2013
|
Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption |
ASTM D 4571 : 2006 : R2017
|
Standard Test Methods for Rubber Compounding Materials—Determination of Volatile Material |
ASTM D 4075 : 2006 : R2017
|
Standard Test Methods for Rubber Compounding Materials—Flame Atomic Absorption Analysis—Determination of Metals |
ASTM D 1229 : 2003 : R2008
|
Standard Test Method for Rubber Property-Compression Set at Low Temperatures |
ASTM D 6147 : 1997 : R2002
|
Test Method for Vulcanized Rubber and Thermoplastic Elastomer—Determination of Force Decay (Stress Relaxation) in Compression |
ASTM D 6600 : 2000 : R2009
|
Standard Practice for Evaluating Test Sensitivity for Rubber Test Methods |
ASTM D 3188 : 2006 : R2017
|
Standard Test Methods for Rubber—Evaluation of IIR (Isobutene-Isoprene Rubber) |
ASTM D 5902 : 2005 : R2015
|
Standard Test Method for Rubber—Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value |
ASTM D 2228 : 2004 : R2015
|
Standard Test Method for Rubber Property—Relative Abrasion Resistance by Pico Abrader Method |
ASTM D 5670 : 1995 : R2000 : EDT 1
|
Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry |
ASTM D 3314 : 2002
|
Standard Test Method for Rubber-Chemical Analysis for Polystyrene Blocks In SBR (Styrene-Butadiene Rubber) and Styrene-Reinforced Latices |
ASTM D 3616 : 1995 : R2004 : EDT 1
|
Standard Test Method for Rubber, Raw-Determination of Gel, Swelling Index, and Dilute Solution Viscosity |
ASTM D 4573 : 2003
|
Standard Test Method for Rubber Chemicals—Determination of Oil Content in Oil-Treated Sulfur |
ASTM D 1053 : 1992 : REV A : R1997
|
Standard Test Methods for Rubber Property—Stiffening at Low Temperatures: Flexible Polymers and Coated Fabrics |
ASTM D 4574 : 2006
|
Standard Test Methods for Rubber Compounding Materials—Determination of Ash Content |
ASTM D 5774 : 1995 : R2009
|
Standard Test Methods for Rubber-Chemical Analysis of Extractables |
ASTM D 5666 : 1995 : R2000
|
Standard Test Method for P-Phenylenediamine Antidegradants-Purity by High Performance Liquid Chromatography |
ASTM D 454 : 2004
|
Standard Test Method for Rubber Deterioration by Heat and Air Pressure |
ASTM D 3848 : 2003 : R2013
|
Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Copolymers) Mixed With Carbon Black |
ASTM D 7121 : 2005 : R2012
|
Standard Test Method for Rubber Property—Resilience Using Schob Type Rebound Pendulum |
ASTM D 6515 : 2000 : R2004
|
Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending |
ASTM D 6085 : 1997 : R2011
|
Standard Practice for Sampling in Rubber TestingTerminology and Basic Concepts |
ASTM D 3629 : 1999
|
Standard Test Method for Rubber Property-Cut Growth Resistance (Withdrawn 2005) |
ASTM D 5774 : 1995 : R2004 : EDT 2
|
Standard Test Methods for Rubber-Chemical Analysis of Extractables |
ASTM D 5668 : 2009 : R2014
|
Standard Test Methods for Rubber From Synthetic Sources—Volatile Matter |
ASTM D 3191 : 2010 : R2014
|
Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)—Recipe and Evaluation Procedures |
ASTM D 6147 : 1997 : R2008
|
Standard Test Method for Vulcanized Rubber and Thermoplastic Elastomer—Determination of Force Decay (Stress Relaxation) in Compression |
ASTM D 1278 : 1991 : REV A : R2002 : EDT 1
|
Standard Test Methods for Rubber from Natural Sources-Chemical Analysis |
ASTM D 4572 : 1989 : R1999
|
Standard Test Method for Rubber Chemicals-Wet Sieve Analysis of Sulfur |
ASTM D 991 : 1989 : R2014
|
Standard Test Method for Rubber Property—Volume Resistivity Of Electrically Conductive and Antistatic Products |
ASTM D 5044 : 2006
|
Standard Test Method for Rubber Compounding Materials—Free 2-Mercaptobenzothiazole (MBT) in Benzothiazyl Disulfide (MBTS) |
ASTM D 6047 : 2017 : REDLINE
|
Standard Test Methods for Rubber, Raw—Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers |
ASTM F 1112 : 2006 : REV A : R2010
|
Standard Test Method for Static Testing of Tubeless Pneumatic Tires for Rate of Loss of Inflation Pressure |
ASTM D 4026 : 2006
|
Standard Test Method for Rubber Latex—Styrene-Butadiene Copolymer—Determination of Residual Styrene |
ASTM F 1112 : 2006
|
Standard Test Method for Static Testing of Tubeless Pneumatic Tires for Rate of Loss of Inflation Pressure |
ASTM D 3616 : 1995 : R2014
|
Standard Test Method for Rubber—Determination of Gel, Swelling Index, and Dilute Solution Viscosity |
ASTM D 4573 : 2003 : R2014
|
Standard Test Method for Rubber Chemicals—Determination of Oil Content in Oil-Treated Sulfur |