A-A-52210 Base Document:1996
|
STRAIGHTEDGE, STEEL (MACHINISTS' AND TOOLMAKERS') |
MIL-P-80249 Revision A:1982
|
PLATING UNIT, SELECTIVE (BRUSH) PORTABLE |
API MPM CH15 : 2001 : R2007
|
MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 15: GUIDELINES FOR THE USE OF THE INTERNATIONAL SYSTEM OF UNITS (SI) IN THE PETROLEUM AND ALLIED INDUSTRIES |
MIL-STD-1446 Revision A:1994
|
METAL ORGANIC COMPOUNDS, REAGENT GRADE (INCLUDING ACS & USP-NF COMPOUNDS) |
MIL-B-14154 Revision E:1992
|
BORING MACHINE, CAM AND MAIN BEARINGS, PORTABLE |
ASTM F 1251 : 1989 : R2003
|
Standard Terminology Relating to Polymeric Biomaterials in Medical and Surgical Devices (Withdrawn 2012) |
GGG-V-790 Revision E:1992
|
VULCANIZERS, HOT PATCH AND PLATE; INNER TUBE |
DOD-STD-35-48 Revision A:1987
|
AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM TRANSDUCERS |
DOD STD 100 : C NOTICE 6
|
ENGINEERING DRAWING PRACTICES |
MIL-STD-1908 Base Document:1992
|
DEFINITION OF HUMAN FACTOR TERMS (METRIC) |
MIL-STD-1443 Revision A:1994
|
INORGANIC ACIDS AND ACID ANHYDRIDES, REAGENT GRADE (INCLUDING ACS AND USP-NF COMPOUNDS) |
MIL-STD-612 Revision C:1993
|
INORGANIC BASES AND BASIC ANHYDRIDES, TECHNICAL GRADE (METRIC) |
MIL-STD-1209 Revision B:1993
|
INORGANIC SALTS AND COMPOUNDS TECHNICAL GRADE (STRONTIUM NITRATE THROUGH ZINC OXIDE) |
ASCE/CI 15 17 : 2017
|
STANDARD PRACTICE FOR DIRECT DESIGN OF BURIED PRECAST CONCRETE PIPE USING STANDARD INSTALLATIONS (SIDD) |
MIL A 46192 : B
|
ALUMINUM ALLOY ARMOR ROLLED PLATE (1/2 TO 4 INCHES THICK), WELDABLE (ALLOY 2519) |
ASTM D 6330 : 1998 : R2014
|
Standard Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test Conditions |
DOD-STD-35-76 Revision A:1978
|
AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, THERMISTORS |
DOD-STD-35-4 Revision C:1978
|
AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, CAPACITORS, FIXED |
ASTM E 1617 : 2009
|
Standard Practice for Reporting Particle Size Characterization Data |
MIL-A-46099 Revision C:1987
|
ARMOR PLATE, STEEL, ROLL-BONDED, DUAL HARDNESS (0.187 INCHES TO 0.700 INCHES INCLUSIVE) |
NFPA 14A : 1989
|
INSPECTION, TESTING AND MAINTENANCE OF STANDPIPE AND HOSE SYSTEMS |
ASTM D 6330 : 1998 : R2003
|
Standard Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test Conditions |
SAE MAP 4053 : 2016
|
UNIFORM MEASUREMENT UNITS FOR LEAKAGE RATES |
ASTM D 4099 : 1995
|
Standard Specification for Poly(Vinyl Choride)(PVC) Prime Windows and Sliding Glass Doors (Withdrawn 1999) |
ASTM E 1507 : 1998 : R2003
|
Standard Guide for Describing and Specifying the Spectrometer of an Optical Emission Direct-Reading Instrument (Withdrawn 2003) |
ASTM D 1990 : 2016 : REDLINE
|
Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens |
API MPM CH15 : 2001(R2015)
|
MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 15: GUIDELINES FOR THE USE OF THE INTERNATIONAL SYSTEM OF UNITS (SI) IN THE PETROLEUM AND ALLIED INDUSTRIES |
ASTM E 453 : 1979 : R1996 : EDT 1
|
Standard Practice for Examination of Fuel Element Cladding Including the Determination of the Mechanical Properties |
ASTM E 1241 : 2005
|
Standard Guide for Conducting Early Life-Stage Toxicity Tests with Fishes |
ASTM E 1440 : 1991 : R2004
|
Standard Guide for Acute Toxicity Test with the Rotifer Brachionus |
ASTM D 1757 : 2003
|
Standard Test Method for Sulfate Sulfur in Ash from Coal and Coke (Withdrawn 2009) |
ASTM E 1676 : 2012 : REDLINE
|
Standard Guide for Conducting Laboratory Soil Toxicity or Bioaccumulation Tests with the Lumbricid Earthworm Eisenia Fetida and the Enchytraeid Potworm Enchytraeus albidus |
ASTM E 2317 : 2004 : R2012
|
Standard Guide for Conducting Renewal Microplate-Based Life-Cycle Toxicity Tests with a Marine Meiobenthic Copepod (Withdrawn 2021) |
ASTM C 1366 : 2004 : R2009
|
Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures |
ASTM E 1563 : 1998 : R2012
|
Standard Guide for Conducting Static Acute Toxicity Tests with Echinoid Embryos |
ASTM E 1605 : 2004 : R2012
|
Standard Terminology Relating to Lead in Buildings |
NFPA 76 : 2016
|
FIRE PROTECTION OF TELECOMMUNICATIONS FACILITIES |
NFPA 750 : 2015
|
WATER MIST FIRE PROTECTION SYSTEMS |
PD IEC/PAS 61182-12:2014
|
Generic requirements for printed board assembly products manufacturing description data and transfer methodology |
ANSI Z21.66 : 2015
|
AUTOMATIC DAMPER DEVICES FOR USE WITH GAS-FIRED APPLIANCES |
ASME A17.1 : 2016
|
SAFETY CODE FOR ELEVATORS AND ESCALATORS - INCLUDES REQUIREMENTS FOR ELEVATORS, ESCALATORS, DUMBWAITERS, MOVING WALKS, MATERIAL LIFTS, AND DUMBWAITERS WITH AUTOMATIC TRANSFER DEVICES |
DOD-STD-35-71 Revision A:1983
|
AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM SWITCHES (THERMAL) |
MIL-STD-1206 Revision B:1993
|
INORGANIC SALTS AND COMPOUNDS, TECHNICAL GRADE (FERRIC CHLORIDE THROUGH LITHIUM TETRAFLUOROBORATE (METRIC) |
DOD-STD-35-85 Revision A:1978
|
AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM-FANS AND IMPELLERS |
DOD-STD-35-20 Revision C:1986
|
AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, FITTINGS AND COUPLINGS |
DOD-STD-35-19 Revision A:1984
|
AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM TERMINALS AND TERMINAL STRIPS |
MIL-P-50002 Revision B:1981
|
PHOSPHATE COATING COMPOUNDS, FOR PHOSPHATING FERROUS METALS |
MIL-STD-613 Base Document:1986
|
INORGANIC BASES AND BASIC ANHYDRIDES, REAGENT GRADE (INCLUDING ACS AND USP-NF COMPOUNDS)(METRIC) |
ASTM D 418 : 1993
|
Standard Methods of Testing Pile Yarn Floor Covering Construction (Withdrawn 1998) |
MIL T 83133 : D
|
TURBINE FUELS, AVIATION, KEROSENE TYPES, NATO F-34 (JP-8) AND NATO F-35 |
MIL-STD-35-96 Base Document:1976
|
AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, REGULATORS, CURRENT AND VOLTAGE AC, AND DC |
IEEE 268-1992
|
American National Standard for Metric Practice |
DOD-STD-35-37 Revision A:1978
|
AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM INDUCTORS |
DOD-STD-35-138 Base Document:1979
|
AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, SWITCHES, SENSITIVE |
DOD-STD-35-25 Revision A:1979
|
AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, FILTERS, ELECTRONIC |
MIL T 5624 : R
|
TURBINE FUEL, AVIATION, GRADES JP 4 AND JP 5 |
MIL PRF 5624 : S
|
TURBINE FUEL, AVIATION, GRADES JP-4, JP-5 AND JP-5/JP-8 ST |
MIL-STD-1220 Revision B:1991
|
MISCELLANEOUS ALCOHOLS AND AMINES, TECHNICAL GRADE |
A-A-52211 Base Document:1996
|
STRETCHERS, STEEL, STRAPPING, HAND |
MIL-STD-1438 Revision A:1984
|
INDICATOR, ORGANIC, REAGENT GRADE |
A-A-52199 Base Document:1995
|
TRAY, MESS, COMPARTMENTED, PLASTIC |
A-A-52212 Base Document:1996
|
GAGE, CYLINDER |
ASTM E 2317 : 2004
|
Standard Guide for Conducting Renewal Microplate-Based Life-Cycle Toxicity Tests with a Marine Meiobenthic Copepod |
MIL-STD-847 Revision B:1983
|
SCIENTIFIC AND TECHNICAL REPORTS PREPARED BY OR FOR THE DEPARTMENT OF DEFENSE, FORMAT REQUIREMENTS FOR |
DOD-STD-35-8 Revision B:1979
|
AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM RELAYS |
DOD-STD-35-36 Revision B:1979
|
AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM SEALS, GASKETS AND PACKING |
MIL-F-80188 Revision B:1985
|
FURNACE, HEAT TREATING, ELECTRIC, METAL LINED, BOX DESIGN |
MIL-B-45857 Revision C:1985
|
BORING MACHINE, CAM AND MAIN BEARINGS (STATIONARY) |
MIL-STD-12 Revision D:1981
|
ABBREVIATIONS FOR USE ON DRAWINGS, SPECIFICATIONS FOR STANDARDS AND IN TECHNICAL DOCUMENTS |
DOD-STD-35-137 Base Document:1978
|
AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, SWITCHES, ILLUMINATED |
ASTM D 4826 : 1988 : R2002
|
Standard Practice for Units of Measurement and Conversion Factors for Pulp, Paper, and Paperboard |
MIL-B-45022 Revision F:1992
|
BLAST CLEANING CABINETS |
CGA 6.14 : 2015
|
AUTOMATIC DAMPER DEVICES FOR USE WITH GAS-FIRED APPLIANCES |
MIL-STD-608 Revision C:1991
|
ALDEHYDES, KETONES, AND PEROXIDES TECHNICAL GRADE |
ANSI Z21.92 : 2001 : INC : ADD A : 2005 : R2012
|
MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS |
ANSI Z21.92 : 2001 : R2012
|
MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS |
NFPA 11C : 1995
|
MOBILE FOAM APPARATUS |
SAE J 1330 : 2014
|
PHOTOMETRY LABORATORY ACCURACY GUIDELINES |
ASCE/CI 27 17 : 2017
|
STANDARD PRACTICE FOR DIRECT DESIGN OF PRECAST CONCRETE PIPE FOR JACKING IN TRENCHLESS CONSTRUCTION |
ASTM E 880 : 1996
|
Guide for Evaluating the Usefulness of Herbicides on Corn (All Types) (Withdrawn 1997) |
ASTM E 1091 : 2013 : REDLINE
|
Standard Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels |
TIA 4920000 : B1997(R2002)
|
GENERIC SPECIFICATION FOR OPTICAL WAVEGUIDE FIBERS |
ACI 211.1 : 1991
|
SELECTING PROPORTIONS FOR NORMAL, HEAVYWEIGHT AND MASS CONCRETE |
NFPA 231E : 1996
|
STORAGE OF BALED COTTON |
NFPA 501C : 1996
|
RECREATIONAL VEHICLES |
ANSI Z21.17 : 1998 : INC : ADD A : 2008 : R2014
|
DOMESTIC GAS CONVERSION BURNERS |
AMCA 210 : 2016
|
LABORATORY METHODS OF TESTING FANS FOR CERTIFIED AERODYNAMIC PERFORMANCE RATING |
ASTM E 1605 : 2004
|
Standard Terminology Relating to Lead in Buildings |
ASTM F 1251 : 1989 : R1995
|
Standard Terminology Relating to Polymeric Biomaterials in Medical and Surgical Devices |
ASTM E 1498 : 1992 : R2012
|
Standard Guide for Conducting Sexual Reproduction Tests with Seaweeds (Withdrawn 2021) |
ASTM E 724 : 1998 : R2012
|
Standard Guide for Conducting Static Acute Toxicity Tests Starting with Embryos of Four Species of Saltwater Bivalve Molluscs |
ASTM E 724 : 1998 : R2004
|
Standard Guide for Conducting Static Acute Toxicity Tests Starting with Embryos of Four Species of Saltwater Bivalve Molluscs |
ASTM E 1507 : 1998
|
Standard Guide for Describing and Specifying the Spectrometer of an Optical Emission Direct-Reading Instrument |
ASTM E 1218 : 2004 : EDT 1
|
Standard Guide for Conducting Static Toxicity Tests with Microalgae |
ASTM E 724:1998
|
Standard Guide for Conducting Static Acute Toxicity Tests Starting with Embryos of Four Species of Saltwater Bivalve Molluscs |
ASTM E 1440 : 1991 : R1998
|
Standard Guide for Acute Toxicity Test with the Rotifer Brachionus |
ASTM E 1563 : 1998 : R2004 : EDT 1
|
Standard Guide for Conducting Static Acute Toxicity Tests with Echinoid Embryos |
ASTM E 1617 : 2009 : R2014 : EDT 1
|
Standard Practice for Reporting Particle Size Characterization Data |
CSA 6.29 : 2001 : INC : ADD B : 2010 : R2016
|
MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS |
NFPA 417 : 1990
|
CONSTRUCTION AND PROTECTION OF AIRCRAFT LOADING WALKWAYS |
A-A-52208 Base Document:1996
|
CUTTER, CABLE, HAND-OPERATED, WITH GROPING HOOK GUIDE |
MIL-STD-1376 Revision B:1995
|
PIEZOELECTRIC CERAMIC MATERIAL AND MEASUREMENTS GUIDELINES FOR SONAR TRANSDUCERS |
DOD-STD-35-82 Revision A:1979
|
AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM CONVERTERS AND INVERTERS |
ASTM D 1590 : 1960 : R1977 : EDT 2
|
Test Methods for Surface Tension of Water and Waste Water |
AECTP-500 : 2016
|
ELECTROMAGNETIC ENVIRONMENTAL EFFECTS TESTS AND VERIFICATION |
ASTM E 1440 : 1991 : R2012
|
Standard Guide for Acute Toxicity Test with the Rotifer Brachionus (Withdrawn 2021) |
GGG-S-69 Revision D:1983
|
SAW, POWER HACK, DRY CUT, PORTABLE (3-INCH CAPACITY) |
MIL-STD-35-108 Revision A:1993
|
AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM TRANSMITTERS |
FED-STD-366 Base Document:1977
|
MOUNT, FILM SLIDE, PHOTOGRAPHIC, FILEABLE (OVERHEAD PROJECTOR) FORMAT FOR |
MIL-C-9897 Revision C:1992
|
CRATE, SLOTTED ANGLE, STEEL OR ALUMINUM FOR LIGHTWEIGHT AIRFRAME COMPONENTS AND BULKY ITEMS [FOR MAXIMUM LOADS OF 3000 POUNDS] |
ASTM E 170 : 2017 : REDLINE
|
Standard Terminology Relating to Radiation Measurements and Dosimetry |
06/30138897 DC : DRAFT JUN 2006
|
ISO 13837 - ROAD VEHICLES - SAFETY GLAZING MATERIALS - METHOD FOR THE DETERMINATION OF SOLAR TRANSMITTANCE |
ASTM E 952 : 1996
|
Guide for Evaluating the Usefulness of Herbicides on Cotton (Withdrawn 1997) |
ASTM E 1407 : 1997
|
Guide for Materials Database Management (Withdrawn 2000) |
ASTM E 868 : 1982 : R2005
|
Standard Test Methods for Conducting Performance Tests on Mechanical Conveying Equipment Used in Resource Recovery Systems (Withdrawn 2005) |
DOD-STD-1690 Base Document:1979
|
MARITIME METRIC PRACTICE GUIDE |
MIL STD 1693 : A NOTICE 2
|
FABRICATION WELDING AND INSPECTION OF HYPERBARIC CHAMBERS AND OTHER CRITICAL LAND BASED STRUCTURES |
MIL-STD-1208 Revision B:1991
|
INORGANIC SODIUM SALTS AND COMPOUNDS, TECHNICAL GRADE |
MIL-C-5584 Revision D:1988
|
CONTAINER, SHIPPING AND STORAGE, METAL REUSABLE |
A-A-52214 Base Document:1997
|
RIVETER, PNEUMATIC, COMPRESSION TYPE, PORTABLE, WITH RIVET SETS |
ASTM D 7750 : 2012
|
Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer |
ANSI Z21.92 : 2001 : INC : ADD B : 2010
|
MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS |
ASTM E 940 : 1996
|
Guide for Evaluating the Usefulness of Herbicides on Syoybeans (Withdrawn 1997) |
NFPA 13A : 1987
|
INSPECTION, TESTING, AND MAINTENANCE OF SPRINKLER SYSTEMS |
ASCE 15 98 : 2000
|
STANDARD PRACTICE FOR DIRECT DESIGN OF BURIED PRECAST CONCRETE PIPE USING STANDARD INSTALLATIONS (SIDD) |
ASTM C 1819 : 2015
|
Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Elastomeric Inserts |
EIA IS 648 : 1996
|
MEASUREMENT OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF EQUIPMENT INTENDED TO OPERATE IN SEVERE ELECTROMAGNETIC ENVIRONMENTS |
NFPA 12B : 1990
|
HALON 1211 FIRE EXTINGUISHING SYSTEMS |
HI 9.1 - 9.5 : 2015
|
PUMPS - GENERAL GUIDELINES |
ASTM E 1563 : 1998.
|
Standard Guide for Conducting Static Acute Toxicity Tests with Echinoid Embryos |
UL 1102:5ED 1999-02
|
Standard for Nonintegral Marine Fuel Tanks |
AECTP-300 : 2006
|
CLIMATIC ENVIRONMENTAL TESTS |
ASCE 26 97 : 2000
|
STANDARD PRACTICE FOR DIRECT DESIGN OF BURIED PRECAST CONCRETE BOX SECTIONS |
ASCE 36 01 : 2001
|
STANDARD CONSTRUCTION GUIDELINES FOR MICROTUNNELING |
ASTM E 1182 : 2001
|
Standard Test Method for Measurement of Surface Layer Thickness by Radial Sectioning (Withdrawn 2002) |
ASTM C 1366 : 2004 : R2013
|
Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures |
ASTM D 5595 : 1994
|
Standard Practice for Determining Buoyancy Corrections During Precision Weighing of Low-Density Samples (Withdrawn 1997) |
ASTM D 7750 : 2012 : R2017
|
Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer |
SAE J 1796 : 2012
|
SPECTRAL TRANSMISSION TEST |
ASTM E 1218 : 2004 : R2012
|
Standard Guide for Conducting Static Toxicity Tests with Microalgae (Withdrawn 2021) |
ASTM D 5730 : 2004
|
Standard Guide for Site Characterization for Environmental Purposes With Emphasis on Soil, Rock, the Vadose Zone and Groundwater (Withdrawn 2013) |
ASTM E 1563 : 1998 : R2004
|
Standard Guide for Conducting Static Acute Toxicity Tests with Echinoid Embryos |
ASTM C 899 : 1979 : R2007
|
Standard Practice for Use of Metric Units of Measure for Reporting Properties of Refractory Materials (COMMITTEE C-8 SUPPLEMENT TO E 380) |
ASTM D 4973 : 1993
|
Specification for White Rigid Poly(Vinyl Chloride)(PVC) Insulating Storm Windows (Withdrawn 1999) |
ASTM D 3536 : 1991
|
Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by Liquir Exclusion Chromatography (Gel Permeation Chromatography - GPC) (Withdrawn 1996) |
ASTM E 668 : 2013 : REDLINE
|
Standard Practice for Application of Thermoluminescence-Dosimetry (TLD) Systems for Determining Absorbed Dose in Radiation-Hardness Testing of Electronic Devices |
IEC PAS 61182-12:2014
|
Generic requirements for printed board assembly products manufacturing description data and transfer methodology |
NASA KSC GP 435 VOL 2 : 1993
|
ENGINEERING DRAWING PRACTICES - VOLUME 2: FACILITIES |
MS33537 Revision E:1974
|
INSERT, SCREW THREAD, HELICAL COIL, COARSE AND FINE THREAD, STANDARD DIMENSIONS FOR |
FCI 75-1 : 1979
|
TEST CONDITIONS AND PROCEDURES FOR MEASURING ELECTRICAL CHARACTERISTICS OF SOLENOID VALVES |
CSA 6.29 : 2001 : INC : ADD B : 2010
|
MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS |
CSA 6.29 : 2001
|
MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS |
CSA 6.29 : 2001 : INC : ADD B : 2010 : R2012
|
MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS |
NFPA 501D : 1996
|
RECREATIONAL VEHICLE PARKS AND CAMPGROUNDS |
API MPM CH15 : 2001
|
MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 15: GUIDELINES FOR THE USE OF THE INTERNATIONAL SYSTEM OF UNITS (SI) IN THE PETROLEUM AND ALLIED INDUSTRIES |
A-A-52209 Base Document:1996
|
SCRIBER, DIAMOND POINT |
MIL-STD-399 Revision A:1976
|
MICROFORM FORMATS |
ASTM E 973M : 1996
|
Standard Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell [Metric] (Withdrawn 2005) |
NFPA 402M : 1991
|
AIRCRAFT RESCUE AND FIRE FIGHTING OPERATIONS |
ASAE EP285.7 : 1988(R2012)
|
GENERAL ENGINEERING FOR AGRICULTURE - USE OF SI (METRIC) UNITS |
A-A-52216 Base Document:1997
|
TAPES, MEASURING: TANK GAUGING TYPE, WITH REEL AND PLUMB BOB |
MIL-B-4042 Revision E:1986
|
BORESCOPE ASSEMBLIES, CYLINDER INSPECTION |
GG-O-635 Revision A:1977
|
OPTICAL FLATS |
PPP-B-587 Revision B:1987
|
BOX, WOOD, WIREBOUND PALLET TYPE |
ASTM E 1218 : 2004
|
Standard Guide for Conducting Static Toxicity Tests with Microalgae |
MIL-G-45811 Revision D:1992
|
GAGE, AIR, LOW PRESSURE, PNEUMATIC FLOATING EQUIPMENT |
MIL-STD-462 Revision D:1993
|
MEASUREMENT OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS |
MIL-L-23249 Revision D:1984
|
LATHES, ENGINE AND TOOL ROOM 13 THRU 17 INCH |
DOD-STD-35-120 Base Document:1978
|
AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, LENSES, FILTERS, AND MIRRORS (OPTICAL) |
DOD-STD-35-117 Base Document:1978
|
AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, SWITCHES, PRESSURE |
ASTM E 1463 : 1992 : R2004
|
Standard Guide for Conducting Static and Flow-Through Acute Toxicity Tests With Mysids From the West Coast of the United States |
MIL-STD-35 Revision E:1991
|
AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM BASIC |
A-A-52204 Base Document:1996
|
Utensils, Cooking, Corrosion-Resisting Steel |
DOD-STD-35-24 Revision A:1978
|
AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, BEARINGS |
A-A-52207 Base Document:1996
|
CUTTER, BARBED WIRE, INSULATED HANDLES, HAND OPERATED |
A-A-52205 Base Document:1996
|
TABLE, FOLDING LEGS |
DOD-STD-35-128 Base Document:1978
|
AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, SWITCHES, REED |
CGA 6.23 : M95 ADDENDA B 2004
|
MANUALLY OPERATED PIEZO-ELECTRIC SPARK GAS IGNITION SYSTEMS AND COMPONENTS |
FED-STD-376 Revision B:1993
|
PREFERRED METRIC UNITS FOR GENERAL USE BY THE FEDERAL GOVERNMENT |
FED-STD-255 Revision B:1967
|
MOUNT, FILM SLIDE, PHOTOGRAPHIC (OVERHEAD PROJECTOR) |
ADS-13F-HDBK : 1997
|
AERONAUTICAL DESIGN STANDARD - HANDBOOK - AIR VEHICLE MATERIALS AND PROCESSES |
ASTM E 988 : 1996 : R2002
|
Standard Temperature-Electromotive Force (EMF) Tables for Tungsten-Rhenium Thermocouples (Withdrawn 2011) |
MIL-B-26195 Revision C:1987
|
BOXES, WOOD CLEATED, SKIDDED, LOAD BEARING BASE |
MIL-STD-35-109 Base Document:1976
|
AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, INDICATORS, POINTER |
A-A-52215 Base Document:1968
|
STRAPPING AND SEALING KITS, HAND-OPERATED |
ASTM D 4474 : 2000
|
Standard Classification System for Styrenic Thermoplastic Elastomer Injection Molding and Extrusion Materials (TES) (Withdrawn 2008) |
DOD STD 1476 : A
|
METRIC SYSTEM, APPLICATION IN NEW DESIGN |
DOD-M-24680 Base Document:1977
|
METRIC MACHINERY/EQUIPMENT, GENERAL REQUIREMENTS FOR |
ANSI Z21.92 : 2001 : INC : ADD B : 2010 : R2016
|
MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS |
ANSI Z21.92 : 2001 : INC : ADD B : 2010 : R2012
|
MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS |
NFPA 422M : 1989
|
AIRCRAFT FIRE AND EXPLOSION INVESTIGATORS |
ASTM E 1498 : 1992 : R1998
|
Standard Guide for Conducting Sexual Reproduction Tests with Seaweeds |
ASCE 28 00 : 2001
|
STANDARD PRACTICE FOR DIRECT DESIGN OF PRECAST CONCRETE BOX SECTIONS FOR JACKING IN TRENCHLESS CONSTRUCTION |
ASCE 27 00:2000
|
STANDARD PRACTICE OF DIRECT DESIGN OF PRECAST CONCRETE PIPE FOR JACKING IN TRENCHLESS CONSTRUCTION |
ASTM D 4826 : 1988 : R1997
|
Standard Practice for Units of Measurement and Conversion Factors for Pulp, Paper, and Paperboard |
ASTM D 5593 : 1999 : EDT 1
|
Standard Classification for Thermoplastic Elastomers-Olefinic (TEO) (Withdrawn 2005) |
ASTM E 1463 : 1992 : R2012
|
Standard Guide for Conducting Static and Flow-Through Acute Toxicity Tests With Mysids From the West Coast of the United States (Withdrawn 2021) |
ASTM C 899 : 1979 : R1997
|
Standard Practice for Use of Metric Units of Measure for Reporting Properties of Refractory Materials |
ASTM D 6330 : 1998
|
Standard Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test Conditions |
ASTM E 1761 : 1995 : R1999
|
Standard Guide for Recommended Formats for Data Records Used in Computerization of Fatigue and Fracture Data of Metals (Withdrawn 2008) |
ASTM E 1062 : 1986 : R1991
|
Practice for Conducting Reproductive Studies with Avian Species (Withdrawn 2000) |
ASTM E 1051 : 1996
|
Guidelines for Evaluating the Usefulness of Herbicides on Potato (Withdrawn 1997) |
ASTM D 1457 : 1992
|
Specification for Polytetrafluorethylene (PTFE) Molding and Extrusion Materials (Withdrawn 1996) |
ASME A17.1-2016/CSA B44-16
|
Safety code for elevators and escalators (Bi-national standard, with ASME A17.1) |
MIL-STD-1435 Revision A:1993
|
ETHERS, REAGENT GRADE (INCLUDING ACS & USP-NF COMPOUNDS) |
MIL-STD-1445 Revision A:1994
|
METAL ORGANIC COMPOUNDS, TECHNICAL GRADE |
MIL-W-45844 Revision D:1987
|
WELDING MACHINE, RESISTANCE, SPOT & TYPE PORTABLE (AUTOMOTIVE REPAIR) |
MIL-HDBK-701 Revision C:1989
|
BLOCKING, BRACING AND SKIDDING OF INDUSTRIAL PLANT EQUIPMENT FOR SHIPMENT AND STORAGE |
ASHRAE 51 : 2016
|
LABORATORY METHODS OF TESTING FANS FOR CERTIFIED AERODYNAMIC PERFORMANCE RATING |
MIL-F-8615 Revision D:1976
|
FUEL SYSTEM COMPONENTS, GENERAL SPECIFICATION FOR [ASG] |
MIL G 45006 : F NOTICE 1
|
GRINDING MACHINE, CRANKSHAFT |
ASTM D 2130 : 2013 : REDLINE
|
Standard Test Method for Diameter of Wool and Other Animal Fibers by Microprojection (Withdrawn 2022) |
DOD-STD-2141 Base Document:1983
|
DEFINITIONS AND SYSTEMS OF UNITS, MAGNETIC SILENCING (METRIC) |
MIL-HDBK-2141 Base Document:1983
|
DEFINITIONS AND SYSTEMS OF UNITS, MAGNETIC SILENCING (METRIC) |
ASTM E 988 : 1996
|
Standard Temperature-Electromotive Force (EMF) Tables for Tungsten-Rhenium Thermocouples |
MIL-STD-286 Revision C:1991
|
PROPELLANTS, SOLID: SAMPLING, EXAMINATION AND TESTING |
DOD-STD-35-121 Base Document:1978
|
AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, EYELETS, FERRULES, AND GROMMETS |
MIL-STD-1217 Revision C:1991
|
ORGANIC ACIDS AND ACID ANHYDRIDES, TECHNICAL GRADE |
CGA 6.8 : M95 ADDENDA B 2000
|
GAS FILTERS ON APPLIANCES |
DOD-STD-35-41 Revision A:1979
|
AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, FILTER, MECHANICAL LIQUID GAS/AIR |
GGG-C-746 Revision G:1979
|
CUTLERY, GALLEY AND KITCHEN (CLEAVER, FORKS, KNIVES, SPATULAS, STEEL AND SERVER) |
MIL-A-14295 Revision C:1985
|
ALIGNMENT EQUIPMENT, WHEEL, FOR MILITARY WHEELED VEHICLES |
A-A-52213 Base Document:1997
|
BATH UNIT, PORTABLE, FOUR SHOWERHEADS |
MIL-STD-1437 Revision A:1993
|
ORGANIC CHEMICAL COMPOUNDS, SOLID, TECHNICAL GRADE |
ASTM E 453 : 1979 : R2001
|
Standard Practice for Examination of Fuel Element Cladding Including the Determination of the Mechanical Properties (Withdrawn 2008) |
DOD-STD-35-126 Base Document:1978
|
AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, CYLINDERS, ACTUATING, LINEAR |
ANSI Z21.92 :2001
|
MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS |
A-A-52441 Base Document:1993
|
MOTORS, WINDSHIELD WIPER; PNEUMATIC, AND VALVES, CONTROL FOR |
ASTM D 2292 : 1985
|
Recommended Practice for Compression Molding Test Specimens of Styrene-Butadiene Molding and Extrusion Materials (Withdrawn 1992) |
ASTM E 1498 : 1992 : R2004
|
Standard Guide for Conducting Sexual Reproduction Tests with Seaweeds |
ASTM D 4509 : 1996
|
Standard Test Methods for Determining the 24-Hour Gas (AIR) Space Acetaldehyde Content of Freshly Blown PET Bottles (Withdrawn 2005) |
ASTM D 2795 : 1995
|
Standard Test Methods for Analysis of Coal and Coke Ash (Withdrawn 2001) |
ASTM E 763 : 1991
|
Practice for Calculation of Absorbed Dose From Neutron Irradiation by Application of Threshold-Foil Measurement Data (Withdrawn 1997) |
ASTM E 868 : 1982 : R1999
|
Standard Test Methods for Conducting Performance Tests on Mechanical Conveying Equipment Used in Resource Recovery Systems |
ANSI Z21.17 : 1998
|
DOMESTIC GAS CONVERSION BURNERS |
ASTM E 1463 : 1992 : R1998
|
Standard Guide for Conducting Static and Flow-Through Acute Toxicity Tests With Mysids From the West Coast of the United States |
ASTM E 1659 : 2012 : REDLINE
|
Standard Test Methods for Coating Mass and Chemical Analysis of Zinc-Nickel Alloy Electrolytically Coated on Steel Sheet |
ASTM C 899 : 1979 : R2002
|
Standard Practice for Use of Metric Units of Measure for Reporting Properties of Refractory Materials (COMMITTEE C-8 SUPPLEMENT TO E 380) |
EIA IS 647 : 1996
|
REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE EMISSIONS AND SUSCEPTIBILITY CHARACTERISTICS OF EQUIPMENT INTENDED TO OPERATE IN SEVERE ELECTROMAGNETIC ENVIRONMENTS |
ASTM E 1241 : 2005 : R2013
|
Standard Guide for Conducting Early Life-Stage Toxicity Tests with Fishes (Withdrawn 2022) |
ASTM C 1366 : 2004
|
Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures |
ASTM D 4826 : 1988 : R2007
|
Standard Practice for Units of Measurement and Conversion Factors for Pulp, Paper, and Paperboard (Withdrawn 2010) |
ASTM D 6330 : 1998 : R2008
|
Standard Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test Conditions |
ASME PTC2 : 2001 : R2014
|
Definitions and Values Code (PTC 2 - 2001) |
ASME PTC2 : 2001
|
DEFINITIONS AND VALUES |
ASME NUM 1 : 2009
|
RULES FOR CONSTRUCTION OF CRANES, MONORAILS, AND HOISTS (WITH BRIDGE OR TROLLEY OR HOIST OF THE UNDERHUNG TYPE) |
ASME PTC2 : 2001 : R2009
|
DEFINITIONS AND VALUES |