ASTM E 1820 : 2013
|
Standard Test Method for Measurement of Fracture Toughness |
ASTM E 1820 : 2009 : EDT 1
|
Standard Test Method for Measurement of Fracture Toughness |
ASTM E 1049 : 1985 : R2017
|
Standard Practices for Cycle Counting in Fatigue Analysis |
ASTM E 2472 : 2012 : EDT 1
|
Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions |
ASTM B 909 : 2017
|
Standard Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum Products |
ASTM E 1942 : 1998 : R2010
|
Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing |
ASTM A 370 : 2021
|
Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
ASTM F 2971 : 2013
|
Standard Practice for Reporting Data for Test Specimens Prepared by Additive Manufacturing |
ASTM A 1058 : 2014
|
Standard Test Methods for Mechanical Testing of Steel Products—Metric |
ASTM E 1876 : 2009
|
Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration |
ASTM E 1457 : 2007
|
Standard Test Method for Measurement of Creep Crack Growth Times in Metals |
ASTM E 1876 : 2001
|
Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration |
ASTM E 2472 : 2012 : R2018
|
Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions |
ASTM E 647 : 1995
|
Standard Test Method for Measurement of Fatigue Crack Growth Rates |
EN ISO 6506-1:2014
|
Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
ASTM E 1875 : 2020 : REV A
|
Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance |
ASTM E 143 : 2013
|
Standard Test Method for Shear Modulus at Room Temperature |
ASTM E 1457 : 2015
|
Standard Test Method for Measurement of Creep Crack Growth Times in Metals |
ASTM E 8/E8M : 2016 : REV A : EDT 1
|
Standard Test Methods for Tension Testing of Metallic Materials |
ASTM E 1457 : 2007 : EDT 2
|
Standard Test Method for Measurement of Creep Crack Growth Times in Metals |
ASTM E 1681: 2003
|
Standard Test Method for Determining a Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials |
ASTM A 1058 : 2012 : REV A
|
Standard Test Methods for Mechanical Testing of Steel Products—Metric |
ASTM E 7 : 2017 : REDLINE
|
Standard Terminology Relating to Metallography |
ASTM E 1681 : 2003 : R2008 : EDT 1
|
Standard Test Method for Determining a Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials |
ASTM E 1823 : 2012 : REV : EDT 0
|
Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 2760 : 2010 : EDT 2
|
Standard Test Method for Creep-Fatigue Crack Growth Testing |
ASTM E 1823 : 2007 : REV A
|
Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 1876 : 2021
|
Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration |
ASTM E 1049 : 1985 : R2011 : EDT 1
|
Standard Practices for Cycle Counting in Fatigue Analysis |
ASTM E 1820 : 2021
|
Standard Test Method for Measurement of Fracture Toughness |
ASTM E 1681 : 2003 : R2008
|
Standard Test Method for Determining a Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials |
ASTM E 1290 : 2002 : EDT 1
|
Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement |
ASTM E 1457 : 2015 : REDLINE
|
Standard Test Method for Measurement of Creep Crack Growth Times in Metals |
ASTM B 348 : 2013 : REDLINE
|
Standard Specification for Titanium and Titanium Alloy Bars and Billets |
ASTM E 2714 : 2009 : EDT 1
|
Standard Test Method for Creep-Fatigue Testing |
ASTM E 1820 : 2011 : EDT 2
|
Standard Test Method for Measurement of Fracture Toughness |
ASTM E 1450 : 2016
|
Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium |
ASTM F 2792 : 2010
|
Standard Terminology for Additive Manufacturing Technologies |
ISO 14556:2015
|
Metallic materials — Charpy V-notch pendulum impact test — Instrumented test method |
ASTM E 606 : 1992 : R1998
|
Standard Practice for Strain-Controlled Fatigue Testing |
ASTM E 8/E8M : 2021
|
Standard Test Methods for Tension Testing of Metallic Materials |
ASTM E 468 : 1990 : R2004
|
Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials |
ASTM E 1304 : 1997
|
Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials |
ASTM E 1457 : 2000
|
Standard Test Method for Measurement of Creep Crack Growth Rates in Metals |
ASTM B 348 : 2005 : EDT 1
|
Standard Specification for Titanium and Titanium Alloy Bars and Billets |
ASTM E 915 : 2016 : REDLINE
|
Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement |
ASTM E 2714 : 2013 : REDLINE
|
Standard Test Method for Creep-Fatigue Testing |
ASTM F 2971 : 2013 : R2021
|
Standard Practice for Reporting Data for Test Specimens Prepared by Additive Manufacturing |
ASTM E 1820 : 2020
|
Standard Test Method for Measurement of Fracture Toughness |
ISO/TR 29381:2008
|
Metallic materials Measurement of mechanical properties by an instrumented indentation test Indentation tensile properties |
ISO/ASTM 52921:2013
|
Standard terminology for additive manufacturing — Coordinate systems and test methodologies |
ASTM E 1823 : 2009 : REV A
|
Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 2789 : 2010 : R2021
|
Standard Guide for Fretting Fatigue Testing |
ASTM B 909 : 2021 : REV A
|
Standard Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum Products |
ASTM E 2368 : 2010 : R2017
|
Standard Practice for Strain Controlled Thermomechanical Fatigue Testing |
ASTM E 1221 : 2006
|
Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels |
ASTM E 10 : 2001
|
Standard Test Method for Brinell Hardness of Metallic Materials |
ASTM E 1457 : 2007 : EDT 4
|
Standard Test Method for Measurement of Creep Crack Growth Times in Metals |
ASTM E 1875 : 2000
|
Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance |
ASTM E 21 : 2020
|
Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials |
ASTM E 1681 : 2003 : R2013
|
Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials |
ASTM E 1875 : 2013
|
Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance |
ASTM B 211 : 1999
|
Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire |
ASTM E 915 : 2019
|
Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement |
ISO 12106:2017
|
Metallic materials — Fatigue testing — Axial-strain-controlled method |
ASTM E 466 : 2015 : REDLINE
|
Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials |
ASTM E 384 : 2017 : REDLINE
|
Standard Test Method for Microindentation Hardness of Materials |
ISO 6892-1:2016
|
Metallic materials Tensile testing Part 1: Method of test at room temperature |
ASTM F 2792 : 2009 : EDT 1
|
Standard Terminology for Additive Manufacturing Technologies |
ASTM E 1820 : 2011 : EDT 1
|
Standard Test Method for Measurement of Fracture Toughness |
ASTM E 6 : 2002
|
Standard Terminology Relating to Methods of Mechanical Testing |
ASTM E 1820 : 2006
|
Standard Test Method for Measurement of Fracture Toughness |
ASTM E 1942 : 1998 : EDT 1
|
Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing |
ASTM E 1450 : 2003
|
Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium |
ASTM B 909 : 2017 : REDLINE
|
Standard Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum Products |
ASTM A 1058 : 2008
|
Standard Test Methods for Mechanical Testing of Steel Products—Metric |
ASTM E 466 : 1996
|
Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials |
ASTM E 1457 : 2007 : EDT 1
|
Standard Test Method for Measurement of Creep Crack Growth Times in Metals |
ASTM E 1820 : 2018
|
Standard Test Method for Measurement of Fracture Toughness |
ASTM E 399 : 2020 : REV A
|
Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials |
ASTM E 1820 : 2011
|
Standard Test Method for Measurement of Fracture Toughness |
ASTM E 1304 : 1997 : R2014
|
Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials |
ASTM E 2368 : 2004
|
Standard Practice for Strain Controlled Thermomechanical Fatigue Testing |
ASTM E 1875 : 2020
|
Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance |
ISO 11531:2015
|
Metallic materials — Sheet and strip — Earing test |
ASTM E 2368 : 2004 : EDT 1
|
Standard Practice for Strain Controlled Thermomechanical Fatigue Testing |
ASTM B 557 : 2015 : REDLINE
|
Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products |
ASTM E 1820 : 2008 : REV A
|
Standard Test Method for Measurement of Fracture Toughness |
AS ISO/ASTM 52910:2020
|
Additive manufacturing - Design - Requirements, guidelines and recommendations |
ASTM E 1457 : 2007 : EDT 3
|
Standard Test Method for Measurement of Creep Crack Growth Times in Metals |
ISO 12737:2010
|
Metallic materials Determination of plane-strain fracture toughness |
ASTM E 10 : 2017-05
|
TEST METHOD FOR BRINELL HARDNESS OF METALLIC MATERIALS |
ASTM E 1049 : 1985 : R2005
|
Standard Practices for Cycle Counting in Fatigue Analysis |
ASTM E 1450 : 2009
|
Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium |
ASTM E 1221 : 2012 : REV A : R2018
|
Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels |
ASTM E 915 : 2021
|
Standard Practice for Verifying the Alignment of X-Ray Diffraction Instruments for Residual Stress Measurement |
ASTM E 1681 : 2003 : R2008 : EDT 2
|
Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials |
ASTM E 1876 : 2007
|
Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration |
ASTM E 1304 : 1997 : R2014 : EDT 1
|
Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials |
ASTM E 1304 : 1997 : R2020
|
Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials |
ASTM E 1820 : 2017
|
Standard Test Method for Measurement of Fracture Toughness |
ISO 22889:2013
|
Metallic materials Method of test for the determination of resistance to stable crack extension using specimens of low constraint |
ISO 15579:2000
|
Metallic materials Tensile testing at low temperature |
ASTM E 2760 : 2010 : EDT 1
|
Standard Test Method for Creep-Fatigue Crack Growth Testing |
ASTM E 1820 : 2020 : EDT 1
|
Standard Test Method for Measurement of Fracture Toughness |
ASTM E 1823 : 2005 : REV A : EDT 1
|
Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 1304 : 1997 : R2002
|
Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials |
ASTM E 1876 : 2015 : REDLINE
|
Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration |
ASTM B 646 : 2017 : REDLINE
|
Standard Practice for Fracture Toughness Testing of Aluminum Alloys |
ASTM E 2760 : 2010
|
Standard Test Method for Creep-Fatigue Crack Growth Testing |
ASTM E 1823 : 2010 : REV A
|
Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 1304 : 1997 : R2008
|
Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials |
ASTM E 1823 : 2021
|
Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 1681 : 2003 : R2013 : EDT 1
|
Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials |
ISO 3452-1:2013
|
Non-destructive testing Penetrant testing Part 1: General principles |
ASTM E 1450 : 1992 : R1998
|
Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium |
ASTM A 370 : 2020
|
Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
ASTM E 1875 : 2013 : REDLINE
|
Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance |
ASTM E 1876 : 2015
|
Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration |
ASTM A 1058 : 2012
|
Standard Test Methods for Mechanical Testing of Steel Products—Metric |
ASTM A 1058 : 2012 : REV B
|
Standard Test Methods for Mechanical Testing of Steel Products—Metric |
ASTM E 740 : 2003
|
Standard Practice for Fracture Testing with Surface-Crack Tension Specimens |
ASTM B 645 : 2010 : R2015
|
Standard Practice for Linear-Elastic Plane–Strain Fracture Toughness Testing of Aluminum Alloys |
ASTM E 9 : 2009
|
Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature |
ASTM E 1823 : 2009 : REV B
|
Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 1457 : 2013
|
Standard Test Method for Measurement of Creep Crack Growth Times and Rates in Metals |
ISO 19819:2004
|
Metallic materials Tensile testing in liquid helium |
ASTM E 2472 : 2006 : EDT 1
|
Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions |
ASTM E 2714 : 2009
|
Standard Test Method for Creep-Fatigue Testing |
ASTM E 1820 : 2017 : REV A
|
Standard Test Method for Measurement of Fracture Toughness |
ISO 12111:2011
|
Metallic materials — Fatigue testing — Strain-controlled thermomechanical fatigue testing method |
ASTM E 1221 : 2010
|
Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels |
ASTM F 2792 : 2012
|
Standard Terminology for Additive Manufacturing Technologies, |
ASTM E 1820 : 2005
|
Standard Test Method for Measurement of Fracture Toughness |
ASTM E 1823 : 2012 : REV D
|
Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 1823 : 2012 : REV B
|
Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 132 : 2017 : REDLINE
|
Standard Test Method for Poisson’s Ratio at Room Temperature |
ASTM E 1290 : 2008 : EDT 1
|
Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement (Withdrawn 2013) |
ASTM E 238 : 1984 : R1996
|
Standard Test Method for Pin-Type Bearing Test of Metallic Materials |
ASTM E 2472 : 2012 : R2018 : EDT 1
|
Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions |
ASTM E 143 : 2013 : REDLINE
|
Standard Test Method for Shear Modulus at Room Temperature |
ISO 3369:2006
|
Impermeable sintered metal materials and hardmetals Determination of density |
ASTM E 466 : 2021
|
Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials |
ASTM E 23 : 2002
|
Standard Test Methods for Notched Bar Impact Testing of Metallic Materials |
ASTM E 1820 : 2015
|
Standard Test Method for Measurement of Fracture Toughness |
ASTM E 466 : 2015
|
Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials |
ASTM E 1820 : 2020 : REV B
|
Standard Test Method for Measurement of Fracture Toughness |
ASTM E 1820 : 2018 : REV A : EDT 1
|
Standard Test Method for Measurement of Fracture Toughness |
ISO 26203-2:2011
|
Metallic materials — Tensile testing at high strain rates — Part 2: Servo-hydraulic and other test systems |
ASTM E 1820 : 2020 : REV A
|
Standard Test Method for Measurement of Fracture Toughness |
ASTM E 2714 : 2013 : R2020
|
Standard Test Method for Creep-Fatigue Testing |
ASTM E 2760 : 2016
|
Standard Test Method for Creep-Fatigue Crack Growth Testing |
ASTM E 6 : 2015 : EDT 3
|
Standard Terminology Relating to Methods of Mechanical Testing |
ASTM F 2792 : 2010 : EDT 1
|
Standard Terminology for Additive Manufacturing Technologies |
ASTM E 915 : 1996
|
Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement |
ASTM E 1876 : 2000
|
Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration |
ISO 148-3:2016
|
Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines |
ASTM E 1942 : 1998 : R2018 : EDT 1
|
Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing |
ASTM F 2792 : 2012 : REV A
|
Standard Terminology for Additive Manufacturing Technologies, (Withdrawn 2015) |
ASTM E 1290 : 2002
|
Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement |
ASTM E 1820 : 2006 : EDT 1
|
Standard Test Method for Measurement of Fracture Toughness |
ASTM E 1221 : 2012 : REV A : R2018 : EDT 1
|
Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels |
ISO 12108:2012
|
Metallic materials Fatigue testing Fatigue crack growth method |
ASTM E 1304 : 1997 : R2008 : EDT 1
|
Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials |
ASTM E 1290 : 1999
|
Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement |
ASTM A 370 : 2011
|
Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
ASTM E 1290 : 2008
|
Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement |
ASTM E 1823 : 1996 : R2002
|
Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 1823 : 1996 : EDT 1
|
Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM B 645 : 1998
|
Standard Practice for Plane-Strain Fracture Toughness Testing of Aluminum Alloys |
ASTM E 1875 : 2000 : EDT 1
|
Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance |
ASTM E 2760 : 2019
|
Standard Test Method for Creep-Fatigue Crack Growth Testing |
ASTM E 467 : 2008 : R2014
|
Standard Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testing System |
ASTM E 1823 : 2012 : REV A
|
Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 9 : 1989 : REV A : R1995
|
Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature |
ASTM B 557 : 1994
|
Standard Test Methods of Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products |
ASTM B 909 : 2021
|
Standard Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum Products |
ISO 12135:2016
|
Metallic materials Unified method of test for the determination of quasistatic fracture toughness |
ASTM E 1823 : 2007
|
Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 837 : 2020
|
Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method |
ISO 1143:2010
|
Metallic materials Rotating bar bending fatigue testing |
ASTM E 111 : 2017 : REDLINE
|
Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus |
ASTM E 2472 : 2012
|
Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions |
ASTM E 1820 : 2015 : REV A : EDT 1
|
Standard Test Method for Measurement of Fracture Toughness |
ASTM E 6 : 2015 : EDT 4 : REDLINE
|
Standard Terminology Relating to Methods of Mechanical Testing |
ASTM E 2760 : 2016 : REDLINE
|
Standard Test Method for Creep-Fatigue Crack Growth Testing |
ISO 6892-2:2011
|
Metallic materials Tensile testing Part 2: Method of test at elevated temperature |
ASTM E 1820 : 2018 : REV A
|
Standard Test Method for Measurement of Fracture Toughness |
ASTM F 2792 : 2009
|
Standard Terminology for Additive Manufacturing Technologies |
ISO 1099:2017
|
Metallic materials — Fatigue testing — Axial force-controlled method |
ISO 1352:2011
|
Metallic materials Torque-controlled fatigue testing |
ASTM E 384 : 2017
|
Standard Test Method for Microindentation Hardness of Materials |
ASTM E 1820 : 2016
|
Standard Test Method for Measurement of Fracture Toughness |
ASTM E 1875 : 2008
|
Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance |
ISO/TR 14936:1998
|
Metallic materials Strain analysis report |
ASTM E 1221 : 2012
|
Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels |
ASTM E 290 : 2014 : REDLINE
|
Standard Test Methods for Bend Testing of Material for Ductility |
ASTM E 1681 : 1999 : EDT 1
|
Standard Test Method for Determining a Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials |
ASTM E 2789 : 2010
|
Standard Guide for Fretting Fatigue Testing |
ASTM A 1058 : 2009
|
Standard Test Methods for Mechanical Testing of Steel ProductsMetric |
ASTM E 1876 : 1999
|
Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration |
ASTM B 769 : 2011 : R2021
|
Standard Test Method for Shear Testing of Aluminum Alloys |
EN ISO 148-1:2016
|
Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016) |
ASTM E 1820 : 1999 : REV A
|
Standard Test Method for Measurement of Fracture Toughness |
ASTM E 1820 : 2001
|
Standard Test Method for Measurement of Fracture Toughness |
ASTM E 2789 : 2010 : R2015
|
Standard Guide for Fretting Fatigue Testing |
ASTM B 645 : 2021
|
Standard Practice for Linear-Elastic Plane-Strain Fracture Toughness Testing of Aluminum Alloys |
ASTM E 2714 : 2013
|
Standard Test Method for Creep-Fatigue Testing |
ISO 26203-1:2010
|
Metallic materials Tensile testing at high strain rates Part 1: Elastic-bar-type systems |
ASTM E 1876 : 2001 : R2006
|
Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration |
ASTM E 1820 : 2013 : EDT 1
|
Standard Test Method for Measurement of Fracture Toughness |
ASTM E 1820 : 2015 : REV A
|
Standard Test Method for Measurement of Fracture Toughness |
ASTM E 143 : 2020
|
Standard Test Method for Shear Modulus at Room Temperature |
ASTM E 467 : 2021
|
Standard Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testing System |
ASTM E 1450 : 2016 : REDLINE
|
Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium |
ASTM E 1823 : 2013
|
Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 1942 : 1998 : R2010 : EDT 1
|
Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing |
ASTM E 1820 : 2009
|
Standard Test Method for Measurement of Fracture Toughness |
ASTM E 2368 : 2010
|
Standard Practice for Strain Controlled Thermomechanical Fatigue Testing |
ASTM E 1820 : 2005 : REV A
|
Standard Test Method for Measurement of Fracture Toughness |
ASTM E 1450 : 1992 : R1998 : EDT 1
|
Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium |
ASTM E 1221 : 2012 : REV A
|
Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels |
ISO 377:2017
|
Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
ASTM E 1823 : 2012 : REV C
|
Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 448 : 1982 : R2002
|
Standard Practice for Scleroscope Hardness Testing of Metallic Materials |
ASTM E 1823 : 2020 : REV B
|
Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 1221 : 1996
|
Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels |
ISO 27306:2016
|
Metallic materials — Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components |
ASTM E 1290 : 2007
|
Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement |
ASTM E 8/E8M : 2016-09
|
TEST METHODS FOR TENSION TESTING OF METALLIC MATERIALS |
ASTM E 1823 : 2005 : REV A
|
Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 2472 : 2006
|
Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions |
ASTM E 1049 : 1985 : R1997
|
Standard Practices for Cycle Counting in Fatigue Analysis |
ASTM A 1058 : 2014 : REDLINE
|
Standard Test Methods for Mechanical Testing of Steel Products—Metric |
ASTM E 1823 : 2011
|
Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 1942 : 1998 : R2004
|
Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing |
ASTM B 769 : 2011 : R2016
|
Standard Test Method for Shear Testing of Aluminum Alloys |
EN ISO 7438:2016
|
Metallic materials - Bend test (ISO 7438:2016) |