Skip to content
Please enter a keyword to search

  • BS EN 1248 : 2001

    Current The latest, up-to-date edition.

    FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR ABRASIVE BLASTING EQUIPMENT

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  01-01-2001

    Publisher:  British Standards Institution

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    Introduction
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 List of significant hazards
    5 Safety requirements and/or measures
      5.1 General
    6 Verification of the safety requirements
      and/or measures
    7 Information for use
      7.1 General
      7.2 Warning devices and safety signs
      7.3 Marking
      7.4 Accompanying documents
    8 Maximum concentration of hazardous substances
      in shot blasting abrasives
    Annex A (normative) - Description of equipment
            covered by this standard
    Annex B (informative) - Illustrative solutions for
            safety measures of blasting equipment
    Annex ZA (informative) - Relationship between
             this European Standard and the Essential
             Requirements of EU Directive 98/37/EC
    Annex ZB (informative) - Relationship between
             this European Standard and the Essential
             Requirements of EU Directive 2006/42/EC
    Bibliography

    Abstract - (Show below) - (Hide below)

    Describes requirements to be met by the manufacturer of abrasive blasting equipment for the foreseeable significant hazards due to design, construction and installation, during commissioning, operation, maintenance and decommissioning of the equipment which employ either centrifugal force or compressed air as a means of accelerating abrasive to achieve the desired result.

    General Product Information - (Show below) - (Hide below)

    Committee MCE/3/10
    Development Note Supersedes 93/717161 DC. (08/2005) 2001 Edition Re-Issued in June 2009 and incorporates AMD 1 2009. Supersedes 08/30175652 DC. (06/2009)
    Document Type Standard
    Publisher British Standards Institution
    Status Current
    Supersedes

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 12096:1997 Mechanical vibration - Declaration and verification of vibration emission values
    EN 1127-1:2011 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
    EN 982:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
    EN 1037:1995+A1:2008 Safety of machinery - Prevention of unexpected start-up
    EN 620:2002+A1:2010 Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials
    EN 1088:1995+A2:2008 Safety of machinery - Interlocking devices associated with guards - Principles for design and selection
    ISO 20643:2005 Mechanical vibration — Hand-held and hand-guided machinery — Principles for evaluation of vibration emission
    IEC 61310-2:2007 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
    EN 981:1996+A1:2008 Safety of machinery - System of auditory and visual danger and information signals
    ISO/TR 11688-1:1995 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
    R044-001 : 1999 SAFETY OF MACHINERY - GUIDANCE AND RECOMMENDATIONS FOR THE AVOIDANCE OF HAZARDS DUE TO STATIC ELECTRICITY
    EN 61310-2:2008 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
    EN 60079-0:2012/A11:2013 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED)
    EN ISO 3861:2008 Rubber hoses for sand and grit blasting - Specification (ISO 3861:2005)
    ISO 10218-1:2011 Robots and robotic devices Safety requirements for industrial robots Part 1: Robots
    EN 1265:1999+A1:2008 Safety of machinery - Noise test code for foundry machines and equipment
    EN 999:1998+A1:2008 Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body
    EN 349:1993+A1:2008 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
    IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
    EN ISO 13850:2015 Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015)
    EN ISO 7731:2008 Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003)
    EN 614-1:2006+A1:2009 Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
    EN ISO 13857:2008 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)
    ISO 11124-1:1993 Preparation of steel substrates before application of paints and related products Specifications for metallic blast-cleaning abrasives Part 1: General introduction and classification
    ISO 7731:2003 Ergonomics Danger signals for public and work areas Auditory danger signals
    ISO 11126-1:1993 Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 1: General introduction and classification
    EN ISO 20643:2008/A1:2012 Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission - Amendment 1: Accelerometer positions (ISO 20643:2005/Amd 1:2012)
    ISO 3861:2005 Rubber hoses for sand and grit blasting Specification
    EN ISO 12100-1:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
    IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
    EN 953:1997+A1:2009 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
    EN 842:1996+A1:2008 Safety of machinery - Visual danger signals - General requirements, design and testing
    IEC 60079-0:2011 Explosive atmospheres - Part 0: Equipment - General requirements
    EN ISO 10218-1:2011 Robots and robotic devices - Safety requirements for industrial robots - Part 1: Robots (ISO 10218-1:2011)
    ISO 12100-2:2003 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
    ISO 13857:2008 Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
    EN ISO 12100-2:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
    ISO 3864-1:2011 Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings
    EN 983:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics
    ISO 12100-1:2003 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
    EN ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
    ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
    IEC 61310-1:2007 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
    EN 626-1:1994+A1:2008 Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers
    EN 1005-3:2002+A1:2008 Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation
    EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
    ISO 7000:2014 Graphical symbols for use on equipment Registered symbols
    1998/37/EC : 1998 DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY
    EN ISO 11688-1:2009 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
    ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
    EN 61310-1:2008 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
    EN 286-1:1998/A2:2005 SIMPLE UNFIRED PRESSURE VESSELS DESIGNED TO CONTAIN AIR OR NITROGEN - PART 1: PRESSURE VESSELS FOR GENERAL PURPOSES
    EN 60204-1 : 2006 COR 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective