• BS EN 15774:2010

    Current The latest, up-to-date edition.

    Food processing machinery. Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi). Safety and hygiene requirements

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  30-11-2010

    Publisher:  British Standards Institution

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    Introduction
    1 Scope
    2 Normative references
    3 Terms and definitions and description of machines
    4 List of significant hazards
    5 Safety and hygiene requirements and/or protective
      measures
    6 Verification of safety and hygiene requirements and/or
      protective measures
    7 Information for use
    Annex A (normative) - Noise test code for machines for
            processing fresh and filled pasta (tagliatelle,
            cannelloni, ravioli, tortellini, orecchiette and
            gnocchi) (Grade 2)
    Annex B (normative) - Principles of design to ensure the
            cleanability of machinery
    Annex ZA (informative) - Relationship between this European
             Standard and the Essential Requirements of EU
             Directive 2006/42/EC
    Bibliography

    Abstract - (Show below) - (Hide below)

    Applicable to machines for the processing of fresh and filled pasta, by mixing, kneading, dough sheet forming, pasta forming and pasteurizing.

    Scope - (Show below) - (Hide below)

    This European Standard applies to machines for the processing of fresh and filled pasta, by mixing, kneading, dough sheet forming, pasta forming and pasteurizing, as described in Clause 3.

    It applies to stationary and movable machines (not intended to be moved during operation), with a nominal capacity of not less than 25 kg/h.

    This European Standard deals with all significant hazards, hazardous situations, and events when the machines falling within the scope of this standard are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). It deals with the hazards during the following phases of themachines\' lifetime: transport, assembly and installation, commissioning, setting and adjusting, operation, cleaning, fault finding, maintenance, de-commissioning, dismantling, disabling and scrapping.

    This European Standard applies to the following groups of machines:

    • discontinuous manually loaded kneading machines with or without lifting and tilting devices;

    • continuous kneading machine;

    • combination of dough kneading and dough sheet forming machine;

    • forming machine processing one single dough sheet;

    • forming machine processing two dough sheets;

    • dough sheet forming machine;

    • sizing roller machine;

    • dough transport shuttle machine;

    • steam pasteurizer machine;

    • cooler machine;

    • dough sheet cutting machine;

    • gnocchi machine;

    • typical shapes pasta machine.

    This European Standard is not applicable to the following machines:

    • household machines;

    • auxiliary equipment (not changing the characteristics of product): conveying systems not part of the machinery, weighting and bagging equipment, lifting and tilting machinery (dealt with in EN 13288).

    This European Standard is not applicable to pasta processing machines, which are manufactured before the date of its publication as EN.

    General Product Information - (Show below) - (Hide below)

    Committee MCE/3/5
    Document Type Standard
    Publisher British Standards Institution
    Status Current
    Supersedes

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 13855:2010 Safety of machinery Positioning of safeguards with respect to the approach speeds of parts of the human body
    ISO 4871:1996 Acoustics — Declaration and verification of noise emission values of machinery and equipment
    ISO 12001:1996 Acoustics Noise emitted by machinery and equipment Rules for the drafting and presentation of a noise test code
    ISO 14122-3:2016 Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails
    ISO 3744:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
    ISO 14122-1:2016 Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access
    EN 1088:1995+A2:2008 Safety of machinery - Interlocking devices associated with guards - Principles for design and selection
    ISO/TR 11688-1:1995 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
    ISO 13732-1:2006 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
    EN 349:1993+A1:2008 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
    EN 481:1993 Workplace atmospheres - Size fraction definitions for measurement of airborne particles
    IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
    EN ISO 13850:2015 Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015)
    EN 1005-2:2003+A1:2008 Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery
    EN ISO 7731:2008 Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003)
    EN 614-1:2006+A1:2009 Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
    EN ISO 13857:2008 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)
    EN ISO 11688-2 : 2000 ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 2: INTRODUCTION TO THE PHYSICS OF LOW-NOISE DESIGN
    ISO 14122-4:2016 Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders
    ISO 7731:2003 Ergonomics Danger signals for public and work areas Auditory danger signals
    EN ISO 13732-1:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)
    EN ISO 11201:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)
    EN ISO 13855:2010 Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body (ISO 13855:2010)
    EN 13284-1:2017 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
    EN ISO 12001:2009 Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996)
    EN 1672-2:2005+A1:2009 Food processing machinery - Basic concepts - Part 2: Hygiene requirements
    EN ISO 12100-1:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
    EN 13288:2005+A1:2009 Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements
    EN ISO 14122-3:2016 Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2016)
    IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
    EN ISO 3744:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
    EN 953:1997+A1:2009 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
    EN 842:1996+A1:2008 Safety of machinery - Visual danger signals - General requirements, design and testing
    EN ISO 14122-4:2016 Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2016)
    EN ISO 14122-2:2016 Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2016)
    ISO 13849-2:2012 Safety of machinery — Safety-related parts of control systems — Part 2: Validation
    ISO 12100-2:2003 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
    ISO 13857:2008 Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
    EN ISO 12100-2:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
    EN ISO 13732-3:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 3: Cold surfaces (ISO 13732-3:2005)
    EN ISO 13849-2:2012 Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012)
    ISO 12100-1:2003 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
    EN ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
    ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
    EN ISO 4871:2009 Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
    IEC 61310-1:2007 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
    EN 626-1:1994+A1:2008 Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers
    EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
    ISO 13732-3:2005 Ergonomics of the thermal environment Methods for the assessment of human responses to contact with surfaces Part 3: Cold surfaces
    ISO 14122-2:2016 Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways
    EN ISO 11688-1:2009 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
    EN ISO 14122-1:2016 Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016)
    ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
    ISO/TR 11688-2:1998 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design
    EN 61310-1:2008 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
    ISO 11201:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
    EN 10088-1:2014 Stainless steels - Part 1: List of stainless steels
    EN 60204-1 : 2006 COR 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective