IEC 60068-2-82:2007
|
Environmental testing - Part 2-82: Tests - Test XW1: Whisker test methods for electronic and electric components |
IEC 61193-2:2007
|
Quality assessment systems - Part 2: Selection and use of sampling plans for inspection of electronic components and packages |
IEC 60068-1:2013
|
Environmental testing - Part 1: General and guidance |
IEC 60068-2-58:2015+AMD1:2017 CSV
|
Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) |
IEC 60068-2-27:2008
|
Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
IEC 60068-2-20:2008
|
Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads |
EN 60068-2-20:2008
|
Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads |
EN 60068-2-1:2007
|
Environmental testing - Part 2-1: Tests - Test A: Cold |
IECQ 001002-3:2005
|
IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ) - RULES OF PROCEDURE - PART 3: APPROVAL PROCEDURES |
IEC 61249-2-7:2002
|
Materials for printed boards and other interconnecting structures - Part 2-7: Reinforced base materials clad and unclad - Epoxide woven E-glass laminated sheet of defined flammability (vertical burning test), copper-clad |
EN 60068-2-2:2007
|
Environmental testing - Part 2-2: Tests - Test B: Dry heat |
IEC 60068-2-21:2006
|
Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices |
IEC 60068-2-13:1983
|
Basic environmental testing procedures - Part 2-13: Tests - Test M: Low air pressure |
EN 60068-1:2014
|
Environmental testing - Part 1: General and guidance |
EN 60060-1:2010
|
High-voltage test techniques - Part 1: General definitions and test requirements |
EN 61760-1:2006
|
SURFACE MOUNTING TECHNOLOGY - PART 1: STANDARD METHOD FOR THE SPECIFICATION OF SURFACE MOUNTING COMPONENTS (SMDS) |
IEC 60068-2-11:1981
|
Basic environmental testing procedures - Part 2-11: Tests - Test Ka: Salt mist |
IEC 61760-1:2006
|
Surface mounting technology - Part 1: Standard method for the specification of surface mounting components (SMDs) |
EN 60027-1:2006/A2:2007
|
LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 1: GENERAL |
IECQ 001002-2:1998
|
IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ) - RULES OF PROCEDURE - PART 2: DOCUMENTATION |
EN 61249-2-35:2009
|
Materials for printed boards and other interconnecting structures - Part 2-35: Reinforced base materials, clad and unclad - Modified epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
IEC 60027-1:1992
|
Letters symbols to be used in electrical technology - Part 1: General |
EN 61249-2-7:2002/corrigendum:2005
|
MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-7: REINFORCED BASE MATERIALS CLAD AND UNCLAD - EPOXIDE WOVEN E-GLASS LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
IEC 60068-2-67:1995
|
Environmental testing - Part 2-67: Tests - Test Cy: Damp heat, steady state, accelerated test primarily intended for components |
EN 61249-2-22:2005
|
Materials for printed boards and other interconnecting structures - Part 2-22: Reinforced base materials, clad and unclad - Modified non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad |
IEC 60410:1973
|
Sampling plans and procedures for inspection by attributes |
EN 60068-2-27:2009
|
Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
IEC 61760-2:2007
|
Surface mounting technology - Part 2: Transportation and storage conditions of surface mounting devices (SMD) - Application guide |
IEC 60294:2012
|
Measurement of the dimensions of a cylindrical component with axial terminations |
IEC 60068-2-54:2006
|
Environmental testing - Part 2-54: Tests - Test Ta: Solderability testing of electronic components by the wetting balance method |
EN 61193-2 : 2007
|
QUALITY ASSESSMENT SYSTEMS - PART 2: SELECTION AND USE OF SAMPLING PLANS FOR INSPECTION OF ELECTRONIC COMPONENTS AND PACKAGES |
EN 60068-2-21:2006
|
Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices |
IEC 60068-2-2:2007
|
Environmental testing - Part 2-2: Tests - Test B: Dry heat |
EN 60068-2-67:1996
|
Environmental testing - Part 2: Tests - Test Cy: Damp heat, steady state, accelerated test primarily intended for components |
IEC TR 60440:1973
|
Method of measurement of non-linearity in resistors |
EN 61340-3-1:2007
|
Electrostatics - Part 3-1: Methods for simulation of electrostatic effects - Human body model (HBM) electrostatic discharge test waveforms |
IEC 60062:2016
|
Marking codes for resistors and capacitors |
EN 60062:2016/AC:2016-12
|
MARKING CODES FOR RESISTORS AND CAPACITORS (IEC 60062:2016/COR1:2016) |
ISO 80000-1:2009
|
Quantities and units — Part 1: General |
IEC 61249-2-35:2008
|
Materials for printed boards and other interconnecting structures - Part 2-35: Reinforced base materials, clad and unclad - Modified epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
IEC 61340-3-1:2006
|
Electrostatics - Part 3-1: Methods for simulation of electrostatic effects - Human body model (HBM) electrostatic discharge test waveforms |
EN 60068-2-78:2013
|
Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state |
EN 60068-2-13:1999
|
Environmental testing - Part 2: Tests - Test M: Low air pressure |
EN 60068-2-6:2008
|
Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) |
IEC 60063:2015
|
Preferred number series for resistors and capacitors |
EN 61760-2:2007
|
Surface mounting technology - Part 2: Transportation and storage conditions of surface mounting devices (SMD) - Application guide |
EN 60068-2-82:2007
|
Environmental testing - Part 2-82: Tests - Test XW1: Whisker test methods for electronic and electric components |
EN 60068-2-11:1999
|
Environmental testing - Part 2: Tests - Test Ka: Salt mist |
EN 60068-2-54:2006
|
Environmental testing - Part 2-54: Tests - Test Ta: Solderability testing of electronic components by the wetting balance method |
IEC 60068-2-1:2007
|
Environmental testing - Part 2-1: Tests - Test A: Cold |
IECQ 210000:1995
|
TECHNOLOGY APPROVAL SCHEDULES - REQUIREMENTS UNDER THE IECQ QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ) |
IEC 61249-2-22:2005
|
Materials for printed boards and other interconnecting structures - Part 2-22: Reinforced base materials clad and unclad - Modified non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad |
IEC 60060-1:2010
|
High-voltage test techniques - Part 1: General definitions and test requirements |
EN 60068-2-30:2005
|
Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
EN 60695-11-5:2017
|
Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance |
IEC 60695-11-5 : 2.0
|
FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE |
IEC 60695-11-5:2016
|
Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance |
IEC 60068-2-14:2009
|
Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
EN 60068-2-45:1992/A1:1993
|
Environmental testing - Part 2: Tests - Test Xa and guidance: Immersion in cleaning solvents |
EN 60068-2-14:2009
|
Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
IEC 60068-2-69:2017
|
Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability testing of electronic components and printed boards by the wetting balance (force measurement) method |
IEC 60195:2016
|
Method of measurement of current noise generated in fixed resistors |
IEC 60068-2-30:2005
|
Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |