Skip to content
Please enter a keyword to search

  • BS EN ISO 13709:2003

    Current The latest, up-to-date edition.

    Centrifugal pumps for petroleum, petrochemical and natural gas industries

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  04-11-2003

    Publisher:  British Standards Institution

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    Introduction
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Classification and designation
      4.1 General
      4.2 Pump designations
      4.3 Units and governing requirements
    5 Basic design
      5.1 General
      5.2 Pump types
      5.3 Pressure casings
      5.4 Nozzles and pressure casing connections
      5.5 External nozzle forces and moments
      5.6 Rotors
      5.7 Wear rings and running clearances
      5.8 Mechanical shaft seals
      5.9 Dynamics
      5.10 Bearings and bearing housings
      5.11 Lubrication
      5.12 Materials
      5.13 Nameplates and rotation arrows
    6 Accessories
      6.1 Drivers
      6.2 Couplings and guards
      6.3 Baseplates
      6.4 Instrumentation
      6.5 Piping and appurtenances
      6.6 Special tools
    7 Inspection, testing, and preparation for shipment
      7.1 General
      7.2 Inspection
      7.3 Testing
      7.4 Preparation for shipment
    8 Specific pump types
      8.1 Single-stage overhung pumps
      8.2 Between-bearings pumps (types BB1 through BB5)
      8.3 Vertically suspended pumps (types VS1 through VS7)
    9 Vendor's data
      9.1 General
      9.2 Proposals
      9.3 Contract data
    Annex A (informative) Specific speed and suction-specific
            speed
    Annex B (normative) Cooling water and lubrication system
            schematics
    Annex C (normative) Hydraulic power recovery turbines
    Annex D (normative) Standard baseplates
    Annex E (informative) Inspector's checklist
    Annex F (normative) Criteria for piping design
    Annex G (informative) Materials class selection guidance
    Annex H (normative) Materials and material specifications
            for pump parts
    Annex I (normative) Lateral analysis
    Annex J (normative) Determination of residual unbalance
    Annex K (normative) Seal chamber runout illustrations
    Annex L (informative) Vendor drawing and data requirements
    Annex M (informative) Test data summary
    Annex N (informative) Pump datasheets
    Bibliography

    Abstract - (Show below) - (Hide below)

    Provides requirements for centrifugal pumps, including pumps running in reverse as hydraulic power recovery turbines, for use in petroleum, petrochemical and gas industry process services. Applicable to overhung pumps, between-bearings pumps and vertically-suspended pumps.

    General Product Information - (Show below) - (Hide below)

    Committee PSE/17
    Development Note Available in CD-ROM format only. Supersedes 05/30141722 DC. (11/2010)
    Document Type Standard
    Publisher British Standards Institution
    Status Current
    Superseded By
    Supersedes

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 9906:2012 Rotodynamic pumps — Hydraulic performance acceptance tests — Grades 1, 2 and 3
    ASME PV CODE 8 DIV 2 : 2017 BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 2- ALTERNATIVE RULES
    EN 10269:2013 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
    ISO 14691:2008 Petroleum, petrochemical and natural gas industries — Flexible couplings for mechanical power transmission — General-purpose applications
    ISO 15649:2001 Petroleum and natural gas industries — Piping
    AGMA 9002 : B BORES AND KEYWAYS FOR FLEXIBLE COUPLINGS (INCH SERIES)
    ISO 9905:1994 Technical specifications for centrifugal pumps — Class I
    API 500 : 2012 RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2
    ABMA 9 : 2015 LOAD RATINGS AND FATIGUE LIFE FOR BALL BEARINGS
    ISO 7005-2:1988 Metallic flanges — Part 2: Cast iron flanges
    ISO 3744:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
    ASTM A 995/A995M : 2013 Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts
    ISO 3506-1:2009 Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs
    ASME PV CODE 9 : 2017 BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS
    EN 10028-3:2017 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
    HI 1.6 : 2000 CENTRIFUGAL PUMP TESTS
    EN 10273:2016 Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
    ISO 14120:2015 Safety of machinery Guards General requirements for the design and construction of fixed and movable guards
    API 682 : 2014 PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS
    ISO/TR 17766:2005 Centrifugal pumps handling viscous liquids — Performance corrections
    IEEE 841-2009 IEEE Standard for Petroleum and Chemical Industry--Premium-Efficiency, Severe-Duty, Totally Enclosed Fan-Cooled (TEFC) Squirrel Cage Induction Motors--Up to and Including 370 kW (500 hp)
    EN 1759-1:2004 Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24
    API 685 : 2011 SEALLESS CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL, AND GAS INDUSTRY PROCESS SERVICE
    ASME PV CODE 8 DIV 1 : 2017 BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1
    EN 13463-1:2009 Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements
    EN 10088-3:2014 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
    ISO 724:1993 ISO general-purpose metric screw threads — Basic dimensions
    API 614 : 2008 LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES
    ASME B16.11 : 2016 FORGED FITTINGS, SOCKET-WELDING AND THREADED
    ASTM A 516/A516M : 2017 : REDLINE Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
    ASME B16.42 : 2016 DUCTILE IRON PIPE FLANGES AND FLANGED FITTINGS - CLASSES 150 AND 300
    ISO 3740:2000 Acoustics Determination of sound power levels of noise sources Guidelines for the use of basic standards
    ASME B31.3:2016 PROCESS PIPING
    ISO 1940-1:2003 Mechanical vibration Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances
    ASME PV CODE 8 DIV 3 : 2017 BPVC Section VIII-BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS - ALTERNATIVE RULES FOR CONSTRUCTION OF HIGH PRESSURE VESSELS
    ISO 4991:2015 Steel castings for pressure purposes
    EN 10088-2:2014 STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
    ISO 281:2007 Rolling bearings Dynamic load ratings and rating life
    EN 10028-7:2016 Flat products made of steels for pressure purposes - Part 7: Stainless steels
    EN 10283:2010 Corrosion resistant steel castings
    ISO 15156-2:2015 Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons
    ISO 262:1998 ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts
    ASME B16.1 : 2015 Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250
    ASME B1.20.1 : 2013(R2018) PIPE THREADS, GENERAL PURPOSE (INCH)
    ASME B17.1 : 1967 KEYS AND KEYSEATS
    API 670 : 2014 MACHINERY PROTECTION SYSTEMS
    ISO 10721-2:1999 Steel structures — Part 2: Fabrication and erection
    EN 10272:2016 Stainless steel bars for pressure purposes
    ISO 15156-3:2015 Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys
    ISO 7-1:1994 Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation
    ISO 3746:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane
    ISO 21049:2004 Pumps Shaft sealing systems for centrifugal and rotary pumps
    IEC 60034-2-1:2014 Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)
    ISO 9329-2:1997 Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 2: Unalloyed and alloyed steels with specified elevated temperature properties
    ISO 3117:1977 Tangential keys and keyways
    ISO 683-18:2014 Heat-treatable steels, alloy steels and free-cutting steels — Part 18: Bright steel products
    HI 2.6 : 2000 VERTICAL PUMP TESTS
    EN 10222-5:2017 Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
    EN 10250-4:1999 Open die steel forgings for general engineering purposes - Part 4: Stainless steels
    HI 9.6.7 : 2015 ROTODYNAMIC PUMPS - GUIDELINE FOR EFFECTS OF LIQUID VISCOSITY ON PERFORMANCE
    EN 953:1997+A1:2009 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
    ISO 4200:1991 Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length
    NFPA 70 : 2017 NATIONAL ELECTRICAL CODE
    EN 10222-2:2017 Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties
    SSPC-SP 6 : 2015 COMMERCIAL BLAST CLEANING
    IEC 60034-1:2017 Rotating electrical machines - Part 1: Rating and performance
    ISO 15156-1:2015 Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 1: General principles for selection of cracking-resistant materials
    ASTM A 105/A105M : 2014-11 SPECIFICATION FOR CARBON STEEL FORGINGS FOR PIPING APPLICATIONS
    API 610 : 2010 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
    ASME B16.5 : 2017 PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD
    EN 10083-1:2006 Steels for quenching and tempering - Part 1: General technical delivery conditions
    ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries
    ASME PV CODE 5 : 2017 BOILER AND PRESSURE VESSEL CODE - NONDESTRUCTIVE EXAMINATION
    EN 10083-2:2006 Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels
    ISO 261:1998 ISO general purpose metric screw threads General plan
    API STD 541 : 2014 FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER
    ISO 5753:1991 Rolling bearings — Radial internal clearance
    API 686 : 2009 RECOMMENDED PRACTICE FOR MACHINERY INSTALLATION AND INSTALLATION DESIGN
    MSS SP 55 : 2011 QUALITY STANDARD FOR STEEL CASTINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - VISUAL METHOD FOR EVALUATION OF SURFACE IRREGULARITIES
    ISO 185:2005 Grey cast irons Classification
    ABMA 20 : 2011 RADIAL BEARINGS OF BALL, CYLINDRICAL ROLLER AND SPHERICAL ROLLER TYPES - METRIC DESIGN
    ISO 7005-1:2011 Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems
    ISO 10441:2007 Petroleum, petrochemical and natural gas industries Flexible couplings for mechanical power transmission Special-purpose applications
    AWS D1.1/D1.1M : 2015 STRUCTURAL WELDING CODE-STEEL
    ASTM A 312/A312M : 2017-03 SPECIFICATION FOR SEAMLESS, WELDED, AND HEAVILY COLD WORKED AUSTENITIC STAINLESS STEEL PIPES
    ASME B16.47 : 2017 LARGE DIAMETER STEEL FLANGES: NPS 26 THROUGH NPS 60 METRIC/INCH STANDARD
    EN 10208-1:2009 Steel pipes for pipelines for combustible fluids - Technical delivery condi-tions - Part 1: Pipes of requirement class A
    API 547 : 2017 GENERAL PURPOSE FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 185 KW (250 HP) THROUGH 2240 KW (3000 HP)
    ISO 3506-2:2009 Mechanical properties of corrosion-resistant stainless steel fasteners Part 2: Nuts
    AGMA 9000 : C FLEXIBLE COUPLINGS - POTENTIAL UNBALANCE CLASSIFICATION
    ISO 3448:1992 Industrial liquid lubricants — ISO viscosity classification
    ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
    ISO 683-1:2016 Heat-treatable steels, alloy steels and free-cutting steels Part 1: Non-alloy steels for quenching and tempering
    ABMA 7 : 1995 SHAFT AND HOUSING FITS FOR METRIC RADIAL BALL AND ROLLER BEARINGS (EXCEPT TAPERED ROLLER BEARINGS) CONFORMING TO BASIC BOUNDARY PLAN
    EN 1561:2011 Founding - Grey cast irons
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective