Skip to content
Please enter a keyword to search

  • PD ISO/TS 16688:2017

    Current The latest, up-to-date edition.

    Guidelines for the selection of coating types, tests and methods of assessing the performance of coated aluminium in architectural applications

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  11-01-2018

    Publisher:  British Standards Institution

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 General
    5 Types of environment
    6 Classification of coatings
    7 Coating selection for different
       environments
    8 Durability tests
    9 Selection of test methods to
       enable the comparison of different
       coating types for service in different
       environments
    10 Methods of measuring performance
    Annex A (informative) - Recommended
            cleaning procedures for coated
            aluminium architectural materials
    Bibliography

    Abstract - (Show below) - (Hide below)

    Describes a system to select coating types for architectural applications depending on environment.

    Scope - (Show below) - (Hide below)

    This document establishes a system to select coating types for architectural applications depending on environment. It gives guidelines for the selection of tests and methods of measuring performance in terms that are of direct interest to the building designer.

    This document is applicable to organic and anodic oxidation (AAO) coatings on aluminium, including those produced from liquid and powder paints, and combined coatings of organic and anodic oxidation coatings. It is designed to be applicable to novel coatings developed in the future.

    General Product Information - (Show below) - (Hide below)

    Committee NFE/35
    Document Type Standard
    Publisher British Standards Institution
    Status Current

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 7599:2010 Anodizing of aluminium and its alloys General specifications for anodic oxidation coatings on aluminium
    ISO 9223:2012 Corrosion of metals and alloys — Corrosivity of atmospheres — Classification, determination and estimation
    ISO 3210:2017 Anodizing of aluminium and its alloys — Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s)
    ISO 8993:2010 Anodizing of aluminium and its alloys Rating system for the evaluation of pitting corrosion Chart method
    ISO 10215:2010 Anodizing of aluminium and its alloys Visual determination of image clarity of anodic oxidation coatings Chart scale method
    ISO 7759:2010 Anodizing of aluminium and its alloys — Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer
    ISO 3211:2010 Anodizing of aluminium and its alloys Assessment of resistance of anodic oxidation coatings to cracking by deformation
    ISO 7668:2010 Anodizing of aluminium and its alloys Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees
    ISO 14577-4:2016 Metallic materials Instrumented indentation test for hardness and materials parameters Part 4: Test method for metallic and non-metallic coatings
    ISO 2106:2011 Anodizing of aluminium and its alloys Determination of mass per unit area (surface density) of anodic oxidation coatings Gravimetric method
    ISO 11303:2002 Corrosion of metals and alloys Guidelines for selection of protection methods against atmospheric corrosion
    ISO 4623-2:2016 Paints and varnishes Determination of resistance to filiform corrosion Part 2: Aluminium substrates
    ISO 15181-1:2007 Paints and varnishes — Determination of release rate of biocides from antifouling paints — Part 1: General method for extraction of biocides
    ISO 4516:2002 Metallic and other inorganic coatings — Vickers and Knoop microhardness tests
    ISO 8994:2011 Anodizing of aluminium and its alloys Rating system for the evaluation of pitting corrosion Grid method
    ISO 6270-1:1998 Paints and varnishes Determination of resistance to humidity Part 1: Continuous condensation
    ISO 2808:2007 Paints and varnishes Determination of film thickness
    EN 1999-1-1:2007/A2:2013 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES
    ISO 1520:2006 Paints and varnishes Cupping test
    ISO 8251:2011 Anodizing of aluminium and its alloys Measurement of abrasion resistance of anodic oxidation coatings
    ISO 2376:2010 Anodizing of aluminium and its alloys Determination of electric breakdown potential
    ISO/TS 80004-8:2013 Nanotechnologies Vocabulary Part 8: Nanomanufacturing processes
    EN 1396:2015 Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
    ISO 16781:2013 Space systems Simulation requirements for control system
    ISO 1463:2003 Metallic and oxide coatings Measurement of coating thickness Microscopical method
    ISO 4378-2:2017 Plain bearings — Terms, definitions, classification and symbols — Part 2: Friction and wear
    ISO 28340:2013 Combined coatings on aluminium — General specifications for combined coatings of electrophoretic organic coatings and anodic oxidation coatings on aluminium
    ISO 14993:2001 Corrosion of metals and alloys Accelerated testing involving cyclic exposure to salt mist, "dry" and "wet" conditions
    ISO 15184:2012 Paints and varnishes Determination of film hardness by pencil test
    ISO 3248:2016 Paints and varnishes Determination of the effect of heat
    ISO 12137:2011 Paints and varnishes — Determination of mar resistance
    ISO 2128:2010 Anodizing of aluminium and its alloys — Determination of thickness of anodic oxidation coatings — Non-destructive measurement by split-beam microscope
    EN 13523-21:2017 Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels
    ISO 2810:2004 Paints and varnishes Natural weathering of coatings Exposure and assessment
    ISO 10216:2017 Anodizing of aluminium and its alloys — Instrumental determination of image clarity of anodic oxidation coatings — Instrumental method
    ISO 17872:2007 Paints and varnishes Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing
    ISO 4624:2016 Paints and varnishes — Pull-off test for adhesion
    ISO 12944-2:2017 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 2: Classification of environments
    ISO 1522:2006 Paints and varnishes — Pendulum damping test
    ISO 23936-2:2011 Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 2: Elastomers
    ISO 2143:2017 Anodizing of aluminium and its alloys — Estimation of loss of absorptive power of anodic oxidation coatings after sealing — Dye-spot test with prior acid treatment
    ISO 7583:2013 Anodizing of aluminium and its alloys — Terms and definitions
    ISO 16348:2003 Metallic and other inorganic coatings Definitions and conventions concerning appearance
    ISO 11998:2006 Paints and varnishes — Determination of wet-scrub resistance and cleanability of coatings
    ISO 2815:2003 Paints and varnishes Buchholz indentation test
    ISO 15686-1:2011 Buildings and constructed assets — Service life planning — Part 1: General principles and framework
    EN 13523-19:2011 Coil coated metals - Test methods - Part 19: Panel design and method of atmospheric exposure testing
    EN 15530:2008 Aluminium and aluminium alloys - Environmental aspects of aluminium products - General guidelines for their inclusion in standards
    ISO 4618:2014 Paints and varnishes — Terms and definitions
    ISO 9227:2017 Corrosion tests in artificial atmospheres — Salt spray tests
    BS 4842:1984 Specification for liquid organic coatings for application to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated with liquid organic coatings
    ISO 1519:2011 Paints and varnishes Bend test (cylindrical mandrel)
    ISO 2085:2010 Anodizing of aluminium and its alloys Check for continuity of thin anodic oxidation coatings Copper sulfate test
    EN 12206-1:2004 Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder
    ISO 11503:1995 Paints and varnishes — Determination of resistance to humidity (intermittent condensation)
    ISO 6719:2010 Anodizing of aluminium and its alloys — Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
    ISO 2931:2010 Anodizing of aluminium and its alloys Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
    DIN 17611:2011-11 Anodized products of aluminium and wrought aluminium alloys - Technical conditions of delivery
    ISO 6581:2010 Anodizing of aluminium and its alloys Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings
    ISO 2409:2013 Paints and varnishes Cross-cut test
    ISO 8565:2011 Metals and alloys Atmospheric corrosion testing General requirements
    ISO 10289:1999 Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates Rating of test specimens and manufactured articles subjected to corrosion tests
    ISO 6860:2006 Paints and varnishes Bend test (conical mandrel)
    ISO 2135:2017 Anodizing of aluminium and its alloys — Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light
    ISO 2813:2014 Paints and varnishes — Determination of gloss value at 20°, 60° and 85°
    ISO 3231:1993 Paints and varnishes — Determination of resistance to humid atmospheres containing sulfur dioxide
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective