|
BS 5925:1991
|
Code of practice for ventilation principles and designing for natural ventilation |
|
BS 476-23:1987
|
Fire tests on building materials and structures Methods for determination of the contribution of components to the fire resistance of a structure |
|
BS 476-4:1970
|
Fire tests on building materials and structures Non-combustibility test for materials |
|
BS 7899-1:1997
|
Code of practice for assessment of hazard to life and health from fire General guidance |
|
BS EN 60519-6:2011
|
Safety in electroheat installations Specifications for safety in industrial microwave heating equipment |
|
BS 8202-2:1992
|
Coatings for fire protection of building elements Code of practice for the use of intumescent coating systems to metallic substrates for providing fire resistance |
|
BS EN 1158:1997
|
Building hardware. Door coordinator devices. Requirements and test methods |
|
BS EN 61508-7:2010
|
Functional safety of electrical/electronic/ programmable electronic safety related systems Overview of techniques and measures |
|
BS EN 61508-5:2010
|
Functional safety of electrical/electronic/ programmable electronic safety related systems Examples of methods for the determination of safety integrity levels |
|
BS EN 13468:2001
|
Thermal insulating products for building equipment and industrial installations. Determination of trace quantities of water soluble chloride, fluoride, silicate, sodium ions and pH |
|
BS ISO 5725-5:1998
|
Accuracy (trueness and precision) of measurement methods and results Alternative methods for the determination of the precision of a standard measurement method |
|
BS 2782-1:Method 140E:1982
|
Methods of testing plastics. Thermal properties Flammability of a small, inclined test piece exposed to an alcohol flame (laboratory method) |
|
DIN 51794:2003-05
|
TESTING OF MINERAL OIL HYDROCARBONS - DETERMINATION OF IGNITION TEMPERATURE |
|
BS 6742-3:1990
|
Electrostatic painting and finishing equipment using flammable materials Electrostatic painting and finishing equipment using flammable materials. Specification for selection, installation and use of hand-held powder spray guns (energy limit of 5 mJ) and their associated apparatus |
|
BS 4841-2:1975
|
Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam for building applications Laminated board for use as a wall and ceiling insulation |
|
BS EN 60695-2-12 : 2010
|
FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS |
|
BS 6327:1982
|
Specification for fire protection of reciprocating internal combustion engines |
|
BS EN 13274-1:2001
|
Respiratory protective devices. Methods of test Determination of inward leakage and total inward leakage |
|
PD CLC/TR 50404:2003
|
Electrostatics. Code of practice for the avoidance of hazards due to static electricity |
|
BS 8414-1:2002
|
Fire performance of external cladding systems Test methods for non-loadbearing external cladding systems applied to the face of a building |
|
BS 5378-2:1980
|
Safety signs and colours Specification for colorimetric and photometric properties of materials |
|
BS EN ISO 3680:2004
|
Methods of test for petroleum and its products. BS 2000-524. Determination of flash/no flash. Rapid equilibrium closed cup method |
|
BS 7629-1:1997
|
Specification for 300/500 V fire resistant electric cables having low emission of smoke and corrosive gases when affected by fire Multicore cables |
|
BS 3958-3:1985
|
Thermal insulating materials Metal mesh faced man-made mineral fibre mattresses |
|
BS 7346-2:1990
|
Components for smoke and heat control systems Specification for powered smoke and heat exhaust ventilators |
|
BS EN 60893-3-4 : 2004
|
INSULATING MATERIALS - INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 3-4: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - REQUIREMENTS FOR RIGID LAMINATED SHEETS BASED ON PHENOLIC RESINS |
|
BS EN 13171 : 2012
|
THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD FIBRE (WF) PRODUCTS - SPECIFICATION |
|
BS EN ISO 5659-1:1999
|
Plastics. Smoke generation Guidance on optical-density testing |
|
ISO 1516:2002
|
Determination of flash/no flash — Closed cup equilibrium method |
|
BS ISO/TR 13387-3:1999
|
Fire safety engineering Assessment and verification of mathematical fire models |
|
BS 7346-3:1990
|
Components for smoke and heat control systems Specification for smoke curtains |
|
BS 2782-1:Method 140D:1997
|
Methods of testing plastics. Thermal properties Flammability of a test piece 550 mm x 35 mm of thin polyvinyl chloride sheeting (laboratory method) |
|
BS 7346-4:2003
|
Components for smoke and heat control systems Functional recommendations and calculation methods for smoke and heat exhaust ventilation systems, employing steady-state design fires. Code of practice |
|
BS 5906:1980
|
Code of practice for storage and on-site treatment of solid waste from buildings |
|
BS 6262-4:1994
|
Glazing for buildings Safety related to human impact |
|
PREN 15233 : DRAFT 2005
|
METHODOLOGY FOR FUNCTIONAL SAFETY ASSESSMENT OF PROTECTIVE SYSTEMS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES |
|
BS 6664-1(1986) : 1986
|
FLASHPOINT OF PETROLEUM AND RELATED PRODUCTS - METHOD OF TEST FOR FLASH - NO FLASH (CLOSED CUP EQUILIBRIUM METHOD) |
|
BS EN 50050:2006
|
Electrical apparatus for potentially explosive atmospheres. Electrostatic hand-held spraying equipment |
|
BS ISO/TR 11696-1:1999
|
Uses of reaction to fire test results Application of test results to predict fire performance of internal linings and other building products |
|
BS EN ISO 20823:2003
|
Petroleum and related products. Determination of the flammability characteristics of fluids in contact with hot surfaces. Manifold ignition test |
|
ISO 28:1976
|
Cinematography — Camera usage of 8 mm Type R motion-picture film — Specifications |
|
BS EN ISO 9239-1:2010
|
Reaction to fire tests for floorings Determination of the burning behaviour using a radiant heat source |
|
BS EN 50268-1:2000
|
Common test methods for cables under fire conditions. Measurement of smoke density of cables burning under defined conditions Apparatus |
|
BS 6742-2:1987
|
Electrostatic painting and finishing equipment using flammable materials Specification for selection, installation and use of hand-held paint spray guns (energy limit of 0,24 mJ) and associated apparatus |
|
BS EN 54-7:2001
|
Fire detection and fire alarm systems Smoke detectors. Point detectors using scattered light, transmitted light or ionization |
|
BS EN 3-1:1996
|
Portable fire extinguishers Description, duration of operation, class A and B fire test |
|
BS EN 54-1:2011
|
Fire detection and fire alarm systems Introduction |
|
BS EN 403:2004
|
Respiratory protective devices for self-rescue. Filtering devices with hood for escape from fire. Requirements, testing, marking |
|
BS EN 3-5:1996
|
Portable fire extinguishers Specification and supplementary tests |
|
BS 5839-5:1988
|
Fire detection and alarm systems for buildings Specification for optical beam smoke detectors |
|
BS 3958-2:1982
|
Thermal insulating materials Calcium silicate preformed insulation |
|
BS IEC 61831:1999
|
On-line analyser systems. Guide to design and installation |
|
BS EN 12882:2015
|
Conveyor belts for general purpose use. Electrical and flammability safety requirements |
|
BS EN 50014:1998
|
Electrical apparatus for potentially explosive atmospheres. General requirements |
|
BS EN 3-4:1996
|
Portable fire extinguishers Charges, minimum required fire |
|
BS EN ISO 14122-1:2016
|
Safety of machinery. Permanent means of access to machinery Choice of fixed means and general requirements of access |
|
BS EN 13471:2001
|
Thermal insulating products for building equipment and industrial installations. Determination of the coefficient of thermal expansion |
|
BS EN 1953:2013
|
Atomising and spraying equipment for coating materials. Safety requirements |
|
BS 8290-1:1991
|
Suspended ceilings Code of practice for design |
|
BS 7036-3:1996
|
Code of practice for safety at powered doors for pedestrian use Swing doors and balanced doors |
|
BS 6458-2.3:1985
|
Fire hazard testing for electrotechnical products. Test methods Bad-connection test with heaters |
|
BS 5309-3:1976
|
Methods for sampling chemical products Sampling of liquids |
|
BS EN 50016:2002
|
Electrical apparatus for potentially explosive atmospheres. Pressurized apparatus \'p\' |
|
BS KIT 140 : 2004
|
PD 7974 SERIES - FIRE SAFETY ENGINEERING PRINCIPLES FOR THE DESIGN OF BUILDINGS |
|
BS EN 1486:2007
|
Protective clothing for fire-fighters. Test methods and requirements for reflective clothing for specialized fire-fighting |
|
BS 5234-1:1992
|
Partitions (including matching linings) Code of practice for design and installation |
|
BS ISO 10294-4 : 2001
|
FIRE RESISTANCE TESTS - FIRE DAMPERS FOR AIR DISTRIBUTION SYSTEMS - PART 4: TEST OF THERMAL RELEASE MECHANISM |
|
BS 5225-3:1982
|
Photometric data for luminaires Method of photometric measurement of battery-operated emergency lighting luminaires |
|
BS 8214:1990
|
Code of practice for fire door assemblies with non-metallic leaves |
|
BS 6391:1983
|
Specification for non-percolating layflat delivery hoses and hose assemblies for fire fighting purposes |
|
BS EN 954-1:1997
|
Safety of machinery. Safety related parts of control systems General principles for design |
|
BS EN ISO 14557 : 2002
|
FIRE-FIGHTING HOSES - RUBBER AND PLASTICS SUCTION HOSES AND HOSE ASSEMBLIES |
|
BS EN 50265-1:1999
|
Common test methods for cables under fire conditions. Test for resistance to vertical flame propagation for a single insulated conductor or cable Apparatus |
|
PREN 1839 : DRAFT 2014
|
DETERMINATION OF EXPLOSION LIMITS OF GASES AND VAPOURS AND DETERMINATION OF THE LIMITING OXYGEN CONCENTRATION (LOC) FOR FLAMMABLE GASES AND VAPOURS |
|
BS IEC 62086-2 : 2001 AMD 16068
|
ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL RESISTANCE TRACE HEATING - PART 2: APPLICATION GUIDE FOR DESIGN, INSTALLATION AND MAINTENANCE |
|
BS 6896:1991
|
Specification for installation of gas-fired overhead radiant heaters for industrial and commercial heating (2nd and 3rd family gases) |
|
BS 3958-1:1982
|
Thermal insulating materials Magnesia preformed insulation |
|
BS EN 1364-2:1999
|
Fire resistance tests for non-loadbearing elements Ceilings |
|
BS EN 1846-3:2013
|
Firefighting and rescue service vehicles Permanently installed equipment. Safety and performance |
|
BS 6643-2:1985
|
Recharging fire extinguishers (manufactured to BS 5423 \'Specification for portable fire extinguishers\') Specification for powder refill charges |
|
BS 7655-8.2:1997
|
Specification for insulating and sheathing materials for cables. Cross-linked sheathing compounds having low emission of corrosive gases, and suitable for use in cables having low emission of smoke when affected by fire Ordinary duty oil-resisting types |
|
BS EN ISO 340:2013
|
Conveyor belts. Laboratory scale flammability characteristics. Requirements and test method |
|
BS EN 1365-1:2012
|
Fire resistance tests for loadbearing elements Walls |
|
BS 7273-1:2000
|
Code of practice for the operation of fire protection measures Electrical actuation of gaseous total flooding extinguishing systems |
|
BS EN 12259-1:1999
|
Fixed firefighting systems. Components for sprinkler and water spray systems Sprinklers |
|
BS ISO 5658-2 : 2006
|
REACTION TO FIRE TESTS - SPREAD OF FLAME - PART 2: LATERAL SPREAD ON BUILDING AND TRANSPORT PRODUCTS IN VERTICAL CONFIGURATION |
|
BS EN 13124-2:2004
|
Windows, doors and shutters. Explosion resistance. Test method Range test |
|
BS EN 60519-2:2006
|
Safety in electroheat installations Particular requirements for resistance heating equipment |
|
BS 5516-2:2004
|
Patent glazing and sloping glazing for buildings Code of practice for sloping glazing |
|
BS EN 1834-1:2000
|
Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres Group II engines for use in flammable gas and vapour atmospheres |
|
BS 5499-6:2002
|
Graphical symbols and signs. Safety signs, including fire safety signs Creation and design of graphical symbols for use in safety signs. Requirements |
|
BS EN 13274-6:2002
|
Respiratory protective devices. Methods of test Determination of carbon dioxide content of the inhalation air |
|
89/106/EEC : 1988
|
COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
|
ISO 5660-2:2002
|
Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 2: Smoke production rate (dynamic measurement) |
|
BS 5306-5.2:1984
|
Code of practice for fire extinguishing installations and equipment on premises. Halon systems Halon 1211 total flooding systems |
|
BS EN 27201-1:1994
|
Fire protection. Fire extinguishing media. Halogenated hydrocarbons Specifications for halon 1211 and halon 1301 |
|
BS 5598-1:1978
|
Methods of sampling and test for halogenated hydrocarbons Sampling of liquid products |
|
BS EN 61241-14:2004
|
Electrical apparatus for use in the presence of combustible dust Selection and installation |
|
BS OHSAS 18001(1999) : 1999 AMD 14223
|
OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS - SPECIFICATION |
|
BS EN 746-2:2010
|
Industrial thermoprocessing equipment Safety requirements for combustion and fuel handling systems |
|
PREN 13501-4 : DRAFT 2015
|
FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 4: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS ON COMPONENTS OF SMOKE CONTROL SYSTEMS |
|
PREN 1364-6 : DRAFT 2016
|
FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 6: CAVITY BARRIERS |
|
BS 2972:1989
|
Methods of test for inorganic thermal insulating materials |
|
BS EN 50194:2000
|
Electrical apparatus for the detection of combustible gases in domestic premises. Test methods and performance requirements |
|
BS EN 620 : 2002
|
|
|
BS 5588-12:2004
|
Fire precautions in the design, construction and use of buildings Managing fire safety |
|
BS 7287:1990
|
Guide for the use of fire-resistant hydraulic fluids |
|
BS EN 533:1997
|
Protective clothing. Protection against heat and flame. Limited flame spread materials and material assemblies |
|
BS EN 1637:1999
|
Light conveyor belts. Test methods for the measurement of the electrical resistances |
|
BS IEC 60079-19:1993
|
Electrical apparatus for explosive gas atmospheres Repair and overhaul for apparatus used in explosive atmospheres (other than mines or explosives) |
|
BS EN 60695-11-2:2017
|
Fire hazard testing Test flames. 1 kW pre-mixed flame. Apparatus, confirmatory test arrangement and guidance |
|
BS 6464:1984
|
Specification for reinforced plastics pipes, fittings and joints for process plants |
|
BS 6913-8:1992
|
Operation and maintenance of earth-moving machinery Specification for common symbols for operator controls and other displays |
|
BS EN 983 : 1996
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS |
|
BS 5266-4:1999
|
Emergency lighting Code of practice for design, installation, maintenance and use of optical fibre systems |
|
BS 5958-2:1991
|
Code of practice for control of undesirable static electricity Recommendations for particular industrial situations |
|
BS 5268-4.1:1978
|
STRUCTURAL USE OF TIMBER - PART 4: FIRE RESISTANCE OF TIMBER STRUCTURES - SECTION 4.1: RECOMMENDATIONS FOR CALCULATING FIRE RESISTANCE OF TIMBER MEMBERS |
|
BS EN 13165 : 2012
|
THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE RIGID POLYURETHANE FOAM (PU) PRODUCTS - SPECIFICATION |
|
BS OHSAS 18002(2000) : 2000 AMD 14224
|
OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS - GUIDELINES FOR THE IMPLEMENTATION OF OHSAS 18001 |
|
BS ISO 5725-2:1994
|
Accuracy (trueness and precision) of measurement methods and results Basic methods for the determination of repeatability and reproducibility of a standard measurement method |
|
BS 5306-6.1:1988
|
Fire extinguishing installations and equipment on premises. Foam systems Specification for low expansion foam systems |
|
BS EN 60079-15:2010
|
Explosive atmospheres Equipment protection by type of protection \'n\' |
|
PREN 1364-5 : DRAFT 2014
|
FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 5: AIR TRANSFER GRILLES |
|
BS 8217:2005
|
Reinforced bitumen membranes for roofing. Code of practice |
|
BS 5306-7:1988
|
Fire extinguishing installations and equipment on premises Specification for powder systems |
|
BS 6401:1983
|
Method for measurement, in the laboratory, of the specific optical density of smoke generated by materials |
|
BS EN 60893-3-2 : 2004
|
INSULATING MATERIALS - INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 3-2: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - REQUIREMENTS FOR RIGID LAMINATED SHEETS BASED ON EPOXY RESINS |
|
BS ISO TR 5658-1:1997
|
Reaction to fire tests. Spread of flame Guidance on flame spread |
|
BS EN 13702-2:2003
|
Methods of test for petroleum and its products. BS 2000-514. Bitumen and bituminous binders. Determination of dynamic viscosity of modified bitumen Coaxial cylinders method |
|
BS 3837-1:2004
|
Expanded polystyrene boards Boards and blocks manufactured from expandable beads. Requirements and test methods |
|
BS EN 50136-2-3:1998
|
Alarm systems. Alarm transmission systems and equipment Requirements for equipment used in systems with digital communicators using the public switched telephone network |
|
BS ISO 10294-1 : 1996
|
FIRE RESISTANCE TESTS - FIRE DAMPERS FOR AIR DISTRIBUTION SYSTEMS - PART 1: TEST METHOD |
|
BS EN 61508-1:2010
|
Functional safety of electrical/electronic/ programmable electronic safety-related systems General requirements |
|
BS EN 13123-1:2001
|
Windows, doors and shutters. Explosion resistance. Requirements and classification Shock tube |
|
BS 8110-2:1985
|
STRUCTURAL USE OF CONCRETE - PART 2: CODE OF PRACTICE FOR SPECIAL CIRCUMSTANCES |
|
BS 5309-2:1976
|
Methods for sampling chemical products Sampling of gases |
|
BS 5266-5:1999
|
Emergency lighting Specification for component parts of optical fibre systems |
|
BS EN 1147:2001
|
Portable ladders for fire service use |
|
BS EN 13821:2002
|
Potentially explosive atmospheres. Explosion prevention and protection. Determination of minimum ignition energy of dust/air mixtures |
|
BS 4994:1987
|
Specification for design and construction of vessels and tanks in reinforced plastics |
|
BS EN 54-4:1998
|
Fire detection and fire alarm systems Power supply equipment |
|
BS 6713-2:1986
|
Explosion protection systems Method for determination of explosion indices of combustible gases in air |
|
BS 5309-1:1976
|
Methods for sampling chemical products Introduction and general principles |
|
ISO 7149:1982
|
Continuous handling equipment Safety code Special rules |
|
BS 5274:1985
|
Specification for fire hose reels (water) for fixed installations |
|
BS 5268-4.2(1990) : 1990
|
STRUCTURAL USE OF TIMBER - FIRE RESISTANCE OF TIMBER STRUCTURES - RECOMMENDATION FOR CALCULATING FIRE RESISTANCE OF TIMBER STUD WALLS AND JOISTED FLOOR CONSTRUCTIONS |
|
BS 6742-4:1990
|
Electrostatic painting and finishing equipment using flammable materials Electrostatic painting and finishing equipment using flammable materials. Specification for selection, installation and use of hand-held flock spray guns (energy limit of 0,24 mJ or 5 mJ) and their associated apparatus |
|
BS EN 54-2 : 1998
|
FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 2: CONTROL AND INDICATING EQUIPMENT |
|
BS EN 61000-4-2:2009
|
Electromagnetic compatibility (EMC) Testing and measurement techniques. Electrostatic discharge immunity test |
|
BS EN 54-3:2014
|
Fire detection and fire alarm systems Fire alarm devices. Sounders |
|
BS EN ISO 15791-1:2013
|
Plastics. Development and use of intermediate-scale fire tests for plastics products General guidance |
|
BS 5306-0:1986
|
Fire extinguishing installations and equipment on premises Guide for the selection of installed systems and other fire equipment |
|
BS 5395-3:1985
|
Stairs, ladders and walkways Code of practice for the design of industrial type stairs, permanent ladders and walkways |
|
BS EN 54-5 : 2017
|
FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 5: HEAT DETECTORS - POINT HEAT DETECTORS |
|
BS EN 1047-1:2005
|
Secure storage units. Classification and methods of test for resistance to fire Data cabinets and diskette inserts |
|
BS 7211:1998
|
Electric cables. Thermosetting insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring, and having low emission of smoke and corrosive gases when affected by fire |
|
BS EN 60598-1:2015
|
Luminaires General requirements and tests |
|
IEC TS 60695-7-50:2002
|
Fire hazard testing - Part 7-50: Toxicity of fire effluent - Estimation of toxic potency - Apparatus and test method |
|
BS EN ISO 10093:1999
|
Plastics. Fire tests. Standard ignition sources |
|
BS 5266-6:1999
|
Emergency lighting Code of practice for non-electrical low mounted way guidance systems for emergency use. Photoluminescent systems |
|
BS EN 730-1:2002
|
Gas welding equipment. Safety devices Incorporating a flame (flashback) arrestor |
|
BS 2782-1:Method 140A:1992
|
Methods of testing plastics. Thermal properties Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source |
|
BS EN 1718:1999
|
Light conveyor belts. Test method for the measurement of the electrostatic field generated by a running light conveyor belt |
|
BS 5041-3:1975
|
Fire hydrant systems equipment Specification for inlet breechings for dry riser inlets |
|
BS 5588-11:1997
|
Fire precautions in the design, construction and use of buildings Code of practice for shops, offices, industrial, storage and other similar buildings |
|
IEC 60050-426:2008
|
International Electrotechnical Vocabulary (IEV) - Part 426: Equipment for explosive atmospheres |
|
BS 6458-2.1:1984
|
Fire hazard testing for electrotechnical products. Test methods Glow-wire test |
|
BS 6664-2(1986) : 1986
|
FLASHPOINT OF PETROLEUM AND RELATED PRODUCTS - METHOD FOR DETERMINATION OF FLASHPOINT (CLOSED CUP EQUILIBRIUM METHOD) |
|
BS 476-11:1982
|
Fire tests on building materials and structures Method for assessing the heat emission from building materials |
|
BS EN 3-6:1996
|
Portable fire extinguishers Provisions for the attestation of conformity of portable fire extinguishers in accordance with EN 3 Part 1 to Part 5 |
|
BS EN 1568-2:2008
|
Fire extinguishing media. Foam concentrates Specification for high expansion foam concentrates for surface application to water-immiscible liquids |
|
DD ENV 1187:2002
|
Test methods for external fire exposure to roofs |
|
BS 8434-2(2003) : 2003
|
METHODS OF TEST FOR ASSESSMENT OF THE FIRE INTEGRITY OF ELECTRIC CABLES - PART 2: TEST FOR UNPROTECTED SMALL CABLES FOR USE IN EMERGENCY CIRCUITS - BS EN 50200 WITH A 930 DEGREE C FLAME AND WITH WATER SPRAY |
|
BS 5499-5:2002
|
Graphical symbols and signs. Safety signs, including fire safety signs Signs with specific safety meanings |
|
BS 4553-3:1998
|
Specification for 600/1000 V single-phase split concentric electric cables Cables having thermosetting insulation and low emission of smoke and corrosive gases when affected by fire |
|
BS 7899-2:1999
|
Code of practice for assessment of hazard to life and health from fire Guidance on methods for the quantification of hazards to life and health and estimation of time to incapacitation and death in fires |
|
BS EN 62040-1-1:2003
|
Uninterruptible power systems (UPS) General and safety requirements for UPS used in operator access areas |
|
BS 6467-2:1988
|
Electrical apparatus with protection by enclosure for use in the presence of combustible dusts Guide to selection, installation and maintenance |
|
BS 3187:1978
|
Specification for electrically conducting rubber flooring |
|
BS 6535-3:1989
|
Fire extinguishing media Specification for powder |
|
ISO 1523:2002
|
Determination of flash point — Closed cup equilibrium method |
|
BS 5041-1:1987
|
Fire hydrant systems equipment Specification for landing valves for wet risers |
|
BS EN 3-7 : 2004
|
PORTABLE FIRE EXTINGUISHERS - PART 7: CHARACTERISTICS, PERFORMANCE REQUIREMENTS AND TEST METHODS |
|
BS EN 13274-4:2001
|
Respiratory protective devices. Methods of test Flame tests |
|
BS EN 61310-2:2008
|
Safety of machinery. Indication, marking and actuation Requirements for marking |
|
BS EN 60893-3-6 : 2004
|
INSULATING MATERIALS - INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 3-6: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - REQUIREMENTS FOR RIGID LAMINATED SHEETS BASED ON SILICONE RESINS |
|
BS 3900-A11:1974
|
Methods of test for paints. Tests on liquid paints (excluding chemical tests) Small scale test for combustibility |
|
BS 476-6(1989) : 1989
|
FIRE TESTS ON BUILDING MATERIALS AND STRUCTURES - PART 6: METHOD OF TEST FOR FIRE PROPAGATION FOR PRODUCTS |
|
PD 6512-3:1987
|
Use of elements of structural fire protection with particular reference to the recommendations given in BS 5588 \'Fire precautions in the design and construction of buildings\' Guide to the fire performance of glass |
|
BS 7273-3:2000
|
Code of practice for the operation of fire protection measures Electrical actuation of pre-action sprinkler systems |
|
BS EN 60079-7 : 2015
|
EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' (IEC 60079-7:2015) |
|
BS EN 81-72:2015
|
Safety rules for the construction and installation of lifts. Particular applications for passenger and goods passenger lifts Firefighters lifts |
|
BS EN 1363-2:1999
|
Fire resistance tests Alternative and additional procedures |
|
BS EN 809 : 1998
|
PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
|
BS 476-20:1987
|
Fire tests on building materials and structures Method for determination of the fire resistance of elements of construction (general principles) |
|
BS 7807:1995
|
Code of practice for design, installation and servicing of integrated systems incorporating fire detection and alarm systems and/or other security systems for buildings other than dwellings |
|
BS EN 54-13:2017
|
Fire detection and fire alarm systems Compatibility and connectability assessment of system components |
|
BS EN 671-3:2009
|
Fixed firefighting systems. Hose systems Maintenance of hose reels with semi-rigid hose and hose systems with lay-flat hose |
|
BS 5588-0:1996
|
Fire precautions in the design, construction and use of buildings Guide to fire safety codes of practice for particular premises/applications |
|
BS EN 50058:1999
|
Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group II apparatus indicating up to 100% (V/V) gas |
|
BS 5225-1:1975
|
Photometric data for luminaires Photometric measurements |
|
PREN 15198 : DRAFT 2005
|
METHODOLOGY FOR THE IGNITION HAZARD ASSESSMENT OF NON-ELECTRICAL EQUIPMENT AND COMPONENTS FOR INTENDED USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
|
BS 476-13:1987
|
Fire tests on building materials and structures Method of measuring the ignitability of products subjected to thermal irradiance |
|
BS 7327-1:1990
|
Small fixed fire extinguishers Specification for small fixed halon fire extinguishers |
|
BS EN ISO 17776:2016
|
Petroleum and natural gas industries. Offshore production installations. Major Accident hazard management during the design of new installations |
|
BS IEC 61511-2 : 2003 AMD 15577
|
FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 2: GUIDELINES FOR THE APPLICATION OF IEC 61511-1 |
|
BS EN 13541:2012
|
Glass in building. Security glazing. Testing and classification of resistance against explosion pressure |
|
BS 5839-8:1998
|
Fire detection and fire alarm systems for buildings Code of practice for the design, installation, commissioning, and maintenance of voice alarm systems |
|
BS 6739:1986
|
Code of practice for instrumentation in process control systems: installation design and practice |
|
BS 4430-2:1969
|
Recommendations for the safety of powered industrial trucks Operation and maintenance |
|
BS EN ISO 1523:2002
|
Method of test for petroleum and its products. Determination of flash point. Closed cup equilibrium method |
|
PD 6503-1:1990
|
Toxicity of combustion products General |
|
BS 5588-5:2004
|
Fire precautions in the design, construction and use of buildings Access and facilities for fire-fighting |
|
BS EN ISO 2592:2017
|
Petroleum and related products. Determination of flash and fire points. Cleveland open cup method |
|
BS EN 50171:2001
|
Central power supply systems |
|
BS 476-21:1987
|
Fire tests on building materials and structures Methods for determination of the fire resistance of loadbearing elements of construction |
|
PD 7974-3:2003
|
Application of fire safety engineering principles to the design of buildings Structural response and fire spread beyond the enclosure of origin (Sub-system 3) |
|
BS ISO TR 9122-3:1993
|
Toxicity testing of fire effluents Methods for the analysis of gases and vapours in fire effluents |
|
BS EN 60079-26:2015
|
Explosive atmospheres Equipment with Equipment Protection Level (EPL) Ga |
|
BS EN 13124-1:2001
|
Windows, doors and shutters. Explosion resistance. Test method Shock tube |
|
BS 476-33:1993
|
Fire tests on building materials and structures Full-scale room test for surface products |
|
BS 3900-J8(1993) : 1993
|
METHODS OF TEST FOR PAINTS - TESTING OF COATING POWDERS - CALCULATION OF LOWER EXPLOSION LIMIT OF COATING POWDERS |
|
BS 5041-5:1974
|
Fire hydrant systems equipment Specification for boxes for foam inlets and dry riser inlets |
|
BS EN 50223:2015
|
Stationary electrostatic application equipment for ignitable flock material. Safety requirements |
|
BS EN 746-1 : 1997
|
INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 1: COMMON SAFETY REQUIREMENTS FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT |
|
BS EN ISO 12100-1 : 2003
|
SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY |
|
BS 7971-2:2003
|
Protective clothing and equipment for use in violent situations and in training Guidance on risk assessment and on the selection, use, cleaning and maintenance of protective clothing and equipment |
|
BS 6713-3:1986
|
Explosion protection systems Method for determination of explosion indices of fuel/air mixtures other than dust/air and gas/air mixtures |
|
BS EN ISO 12241:2008
|
Thermal insulation for building equipment and industrial Installations. Calculation rules |
|
BS EN 50272-3:2002
|
Safety requirements for secondary batteries and battery installations Traction batteries |
|
BS EN 50104:2010
|
Electrical apparatus for the detection and measurement of oxygen. Performance requirements and test methods |
|
BS EN 12845:2015
|
Fixed firefighting systems. Automatic sprinkler systems. Design, installation and maintenance |
|
BS 5306-6.2:1989
|
Fire extinguishing installations and equipment on premises. Foam systems Specification for medium and high expansion foam systems |
|
00/541672 DC : DRAFT NOV 2000
|
BS EN 14043 - AUTOMATIC TURNTABLE LADDERS FOR FIRE SERVICE USE - REQUIREMENTS AND TEST METHODS |
|
BS KIT 126 : 2003
|
COMPONENTS FOR SPRINKLER AND WATER SPRAY SYSTEMS |
|
BS 5306-1:1976
|
Fire extinguishing installations and equipment on premises Hydrant systems, hose reels and foam inlets |
|
BIP 2007 : 2003
|
BASIC GUIDE TO FIRE ENGINEERING |
|
BS 7273-2:1992
|
Code of practice for the operation of fire protection measures Mechanical actuation of gaseous total flooding and local application extinguishing systems |
|
BS 4841-3:1994
|
Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam for building applications Specification for two types of laminated board (roofboards) with auto-adhesively bonded reinforcing facings for use as roofboard thermal insulation for built-up roofs |
|
BS 2000-35(1993) : 1993
|
METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF OPEN FLASH AND FIRE POINT - PENSKY-MARTENS METHOD |
|
BS 476-15:1993
|
Fire tests on building materials and structures Method for measuring the rate of heat release of products |
|
BS EN 1366-5:2010
|
Fire resistance tests for service installations Service ducts and shafts |
|
BS ISO 11925-3:1997
|
Reaction to fire tests. Ignitability of building products subjected to direct impingement of flame Multi-source test |
|
BS EN 340:2003
|
Protective clothing. General requirements |
|
DD ENV 13381-4:2002
|
Test methods for determining the contribution to the fire resistance of structural members Applied protection to steel members |
|
PD 7974-4:2003
|
Application of fire safety engineering principles to the design of buildings Detection of fire and activation of fire protection systems. (Sub-system 4) |
|
BS EN 50381:2004
|
Transportable ventilated rooms with or without an internal source of release |
|
BS EN 13463-2:2004
|
Non-electrical equipment for use in potentially explosive atmospheres Protection by flow restricting enclosure \'fr\' |
|
BS 5345-2:1983
|
Code of practice for selection, installation and maintenance of electrical apparatus for use in potentially explosive atmospheres (other than mining applications or explosive processing and manufacture) Classification of hazardous areas |
|
BS ISO/TR 13387-8:1999
|
Fire safety engineering Life safety. Occupant behaviour, location and condition |
|
BS 8434-1:2003
|
Methods of test for assessment of the fire integrity of electric cables Test for unprotected small cables for use in emergency circuits. BS EN 50200 with addition of water spray |
|
DD IEC/TS 60695-11-40:2002
|
Fire hazard testing. Test flames Confirmatory tests. Guidance |
|
BS 6713-4:1986
|
Explosion protection systems Method for determination of efficacy of explosion suppression systems |
|
DD ENV 13381-7:2002
|
Test methods for determining the contribution to the fire resistance of structural members Applied protection to timber members |
|
BS EN 60695-1-30:2017
|
Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process. General guidelines |
|
BS EN 60519-9:2005
|
Safety in electroheat installations Particular requirements for high-frequency dielectric heating installations |
|
BS EN 14043:2014
|
High rise aerial appliances for fire and rescue service use. Turntable ladders with combined movements. Safety and performance requirements and test methods |
|
BS EN 3-3:1996
|
Portable fire extinguishers Construction, resistance to pressure, mechanical tests |
|
BS 5839-3:1988
|
Fire detection and alarm systems for buildings Specification for automatic release mechanisms for certain fire protection equipment |
|
BS 5041-4:1975
|
Fire hydrant systems equipment Specification for boxes for landing valves for dry risers |
|
BS EN 12259-4:2000
|
Fixed firefighting systems. Components for sprinkler and water spray systems Water motor alarms |
|
TH 42065 : 2008
|
ELECTRICAL EQUIPMENT FOR FLAMMABLE ATMOSPHERES - AN INTERNATIONAL SURVEY OF REGULATIONS, TESTS AND CERTIFICATION REQUIREMENTS |
|
BS EN 50176:2009
|
Stationary electrostatic application equipment for ignitable liquid coating material. Safety requirements |
|
BS 490-11.2:1991
|
Conveyor and elevator belting. Methods of test for safety Low energy and high energy propane gallery tests |
|
BS 476-10:1983
|
Fire tests on building materials and structures Guide to the principles and application of fire testing |
|
BS 7982:2001
|
Guidance on the environmental impact of large-scale fires involving plastics materials |
|
BS EN 61197:1996
|
Insulating liquids. Linear flame propagation. Test method using a glass-fibre tape |
|
BS EN 60695-2-11:2014
|
Fire hazard testing Glowing/hot-wire based test methods. Glow-wire flammability test method for end-products (GWEPT) |
|
BS 476-24:1987
|
Fire tests on building materials and structures Method for determination of the fire resistance of ventilation ducts |
|
BS 6467-1:1985
|
Electrical apparatus with protection by enclosure for use in the presence of combustible dusts Specification for apparatus |
|
BS EN 54-10:2002
|
Fire detection and fire alarm systems Flame detectors. Point detectors |
|
BS EN 61144:1993
|
Test method for the determination of oxygen index of insulating liquids |
|
BS 5839-4:1988
|
Fire detection and alarm systems for buildings Specification for control and indicating equipment |
|
BS 3212:1991
|
Specification for flexible rubber tubing, rubber hose and rubber hose assemblies for use in LPG vapour phase and LPG/air installations |
|
BS 6244:1982
|
Code of practice for stationary air compressors |
|
BS 6207-3:2001
|
Mineral insulated cables with a rated voltage not exceeding 750 V Guide to use |
|
BS 5410-2:1978
|
Code of practice for oil firing Installations of 45 kW and above output capacity for space heating, hot water and steam supply services |
|
BS EN 136:1998
|
Respiratory protective devices. Full face masks. Requirements, testing, marking |
|
BS EN 60079-1:2014
|
Explosive atmospheres Equipment protection by flameproof enclosures \'d\' |
|
BS 8300:2001
|
Design of buildings and their approaches to meet the needs of disabled people. Code of practice |
|
PD 7974-7:2003
|
Application of fire safety engineering principles to the design of buildings Probabilistic risk assessment |
|
BS 5395-2:1984
|
Stairs, ladders and walkways Code of practice for the design of helical and spiral stairs |
|
BS EN 50271:2010
|
Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen. Requirements and tests for apparatus using software and/or digital technologies |
|
BS EN 13355 : 2004
|
COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS |
|
BS 8218:1998
|
Code of practice for mastic asphalt roofing |
|
BS 5442-1:1989
|
Classification of adhesives for construction Classification of adhesives for use with flooring materials |
|
BS 5839-6:2004
|
Fire detection and fire alarm systems for buildings Code of practice for the design, installation and maintenance of fire detection and fire alarm systems in dwellings |
|
BS EN 420 : 2003
|
PROTECTIVE GLOVES - GENERAL REQUIREMENTS AND TEST METHODS |
|
BS 7974:2001
|
Application of fire safety engineering principles to the design of buildings. Code of practice |
|
BS 4422:2005
|
Fire. Vocabulary |
|
BS EN 50266-1:2001
|
Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables Apparatus |
|
BS EN 1762:2017
|
Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa). Specification |
|
BS EN 179:2008
|
Building hardware. Emergency exit devices operated by a lever handle or push pad, for use on escape routes. Requirements and test methods |
|
BS PD TR 13480-7 : 2002
|
METALLIC INDUSTRIAL PIPING - GUIDANCE ON THE USE OF CONFORMITY ASSESSMENT PROCEDURES |
|
BS EN 60801-2:1993
|
Electromagnetic compatibility for industrial-process measurement and control equipment Electrostatic discharge requirements |
|
BS EN 1839:2017
|
Determination of the explosion limits and the limiting oxygen concentration (LOC) for flammable gases and vapours |
|
BS EN 13480-4:2017
|
Metallic industrial piping Fabrication and installation |
|
BS 476-12:1991
|
Fire tests on building materials and structures Method of test for ignitability of products by direct flame impingement |
|
BS EN 1866:2005
|
Mobile fire extinguishers |
|
BS 5173-103.13:1994
|
Methods of test for rubber and plastics hoses and hose assemblies. Physical tests Determination of resistance to fire |
|
IEC 61241-2-1:1994
|
Electrical apparatus for use in the presence of combustible dust - Part 2: Test methods - Section 1: Methods for determining the minimum ignition temperatures of dust |
|
BS EN ISO 15029-1:2000
|
Petroleum and related products. Determination of spray ignition characteristics of fire-resistant fluids Spray flame persistence. Hollow-cone nozzle method |
|
BS 1230-1:1985
|
Gypsum plasterboard Specification for plasterboard excluding materials submitted to secondary operations |
|
BS EN 13463-5:2011
|
Non-electrical equipment intended for use in potentially explosive atmospheres Protection by constructional safety \'c\' |
|
BS 6287:1982
|
Code of practice for safe operation of traction batteries |
|
BS 3958-6:1972
|
Thermal insulating materials Finishing materials; hard setting composition, self-setting cement and gypsum plaster |
|
BS EN 13673-1:2003
|
Determination of the maximum explosion pressure and the maximum rate of pressure rise of gases and vapours Determination of the maximum explosion pressure |
|
DD IEC/TS 60695-11-4:2004
|
Fire hazard testing Test flames. 50 W flame. Apparatus and confirmational test method |
|
PREN 14351-2 : DRAFT 2014
|
WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 2: INTERNAL PEDESTRIAN DOORSETS WITHOUT RESISTANCE TO FIRE AND /OR SMOKE LEAKAGE CHARACTERISTICS |
|
BS EN 60332-2-1:2004
|
Tests on electric and optical fibre cables under fire conditions Test for vertical flame propagation for a single small insulated wire or cable. Apparatus |
|
BS 5309-4:1976
|
Methods for sampling chemical products Sampling of solids |
|
BS 5588-1:1990
|
Fire precautions in the design, construction and use of buildings Code of practice for residential buildings |
|
BS 5803-4:1985
|
Thermal insulation for use in pitched roof spaces in dwellings Methods for determining flammability and resistance to smouldering |
|
BS 6165:2002
|
Specification for small disposable fire extinguishers of the aerosol type |
|
BS 476-31.1:1983
|
Fire tests on building materials and structures Methods for measuring smoke penetration through doorsets and shutter assemblies - Method of measurement under ambient temperature conditions |
|
BS 3958-4:1982
|
Thermal insulating materials Bonded preformed man-made mineral fibre pipe sections |
|
BS 5499-4:2000
|
Safety signs, including fire safety signs. Code of practice for escape route signing |
|
BS EN 1593:1999
|
Non-destructive testing. Leak testing. Bubble emission techniques |
|
BS ISO 13344:2015
|
Estimation of the lethal toxic potency of fire effluents |
|
BS 7944:1999
|
Type 1 heavy duty fire blankets and type 2 heavy duty heat protective blankets |
|
BS ISO TR 5925-2:1997
|
Fire tests. Smoke control door and shutter assemblies Commentary on test method and test data application |
|
BS 3379:1975
|
Specification for flexible urethane foam for loadbearing applications |
|
BS 6941:1988
|
Specification for electrical apparatus for explosive atmospheres with type of protection N |
|
BS EN 2:1992
|
Classification of fires |
|
DD IEC/TS 60695-7-51:2002
|
Fire hazard testing. Toxicity of fire effluent Estimation of toxic potency. Calculation and interpretation of test results |
|
BS EN 694:2014
|
Fire-fighting hoses. Semi-rigid hoses for fixed systems |
|
BS 6713-1:1986
|
Explosion protection systems Method for determination of explosion indices of combustible dusts in air |
|
BS 7244:1990
|
Specification for flame arresters for general use |
|
BIP 2003 : 2003
|
FIRE EXTINGUISHING SYSTEMS - A GUIDE TO THE TYPES, APPLICATION AND CONSIDERATIONS |
|
BS 7629-2:1997
|
Specification for 300/500 V fire resistant electric cables having low emission of smoke and corrosive gases when affected by fire. Multipair cables |
|
BS EN 50266-2-4:2001
|
Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Procedures Category C |
|
BS EN 12416-1:2001
|
Fixed firefighting systems. Powder systems Requirements and test methods for components |
|
BS EN 61340-4-3:2002
|
Electrostatics. Standard test methods for specific applications Footwear |
|
BS 5427-1:1996
|
Code of practice for the use of profiled sheet for roof and wall cladding on buildings Design |
|
BS 5516-1:2004
|
Patent glazing and sloping glazing for buildings Code of practice for design and installation of sloping and vertical patent glazing |
|
04/30117071 DC : DRAFT JUL 2004
|
EN 14994 - GAS EXPLOSION VENTING PROTECTIVE SYSTEMS |
|
BS 5306-3:2003
|
Fire extinguishing installations and equipment on premises Code of practice for the inspection and maintenance of portable fire extinguishers |
|
BS EN 1149-1:2006
|
Protective clothing. Electrostatic properties Test method for measurement of surface resistivity |
|
BS 7990:2003
|
Tube furnace method for the determination of toxic product yields in fire effluents |
|
BS 7036-2:1996
|
Code of practice for safety at powered doors for pedestrian use Straight and curved sliding doors and prismatic and folding doors |
|
BS 7346-1:1990
|
Components for smoke and heat control systems Specification for natural smoke and heat exhaust ventilators |
|
BS 5266-3:1981
|
Emergency lighting Specification for small power relays (electromagnetic) for emergency lighting applications up to and including 32 A |
|
BS KIT 141 : 2004
|
PD 7974 SERIES - FIRE SAFETY ENGINEERING PRINCIPLES FOR THE DESIGN OF BUILDINGS |
|
IEC 62305-3:2010
|
Protection against lightning - Part 3: Physical damage to structures and life hazard |
|
BS 3566:1982
|
Specification for lightweight salvage sheets for fire service use |
|
BS EN 167:2002
|
Personal eye protection. Optical test methods |
|
BS 6262:1982
|
Code of practice for glazing for buildings |
|
BS EN 1366-3:2009
|
Fire resistance tests for service installations Penetration seals |
|
BS 5173-103.6:1990
|
Methods of test for rubber and plastics hoses and hose assemblies. Physical tests Determination of ignitability of lining |
|
BS 5839-9:2003
|
Fire detection and alarm systems for buildings Code of practice for the design, installation, commissioning and maintenance of emergency voice communication systems |
|
BS EN 50057:1999
|
Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group II apparatus indicating up to 100% lower explosive limit |
|
BS EN 13478 : 2002
|
SAFETY OF MACHINERY - FIRE PREVENTION AND PROTECTION |
|
BS 5598-2:1979
|
Methods of sampling and test for halogenated hydrocarbons Sampling of liquefied gases |
|
02/122678 DC : DRAFT JULY 2002
|
EN 14489 - FIRE-RESISTANT HYDRAULIC FLUIDS - CLASSIFICATION AND SPECIFICATION - GUIDELINES ON SELECTION OF THE PROTECTION OF SAFETY, HEALTH AND THE ENVIRONMENT |
|
BS EN 367:1992
|
Protective clothing. Protection against heat and fire. Method for determining heat transmission on exposure to flame |
|
BS 5422:2001
|
Method for specifying thermal insulating materials for pipes, tanks, vessels, ductwork and equipment operating within the temperature range -40°C to +700°C |
|
BS EN 60332-1-1 : 2004
|
TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-1: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - APPARATUS |
|
BS 476-32:1989
|
Fire tests on building materials and structures Guide to full scale fire tests within buildings |
|
BS 7481:1992
|
Code of practice for testing venting systems and shields for lead-acid starter batteries |
|
IEC 61241-14:2004
|
Electrical apparatus for use in the presence of combustible dust - Part 14: Selection and installation |
|
BS EN 1726-2:2000
|
Safety of industrial trucks. Self-propelled trucks up to and including 10000 kg capacity and industrial tractors with a drawbar pull up to and including 20000 N Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads |
|
BS 5266-2:1998
|
Emergency lighting Code of practice for electrical low mounted way guidance systems for emergency use |
|
BS 476-22:1987
|
Fire tests on building materials and structures Method for determination of the fire resistance of non-loadbearing elements of construction |
|
BS 6767-2:1998
|
Transportable accommodation units Recommendations for design and installation of services and fittings with guidance on transportation, siting and aspects relating to habitation |
|
BS 5588-7:1997
|
Fire precautions in the design, construction and use of buildings Code of practice for the incorporation of atria in buildings |
|
BS EN 3-2:1996
|
Portable fire extinguishers Tightness, dielectric test, tamping test, special provisions |
|
BS 5946:1980
|
Method of test for determination of the punking behaviour of phenol-formaldehyde foam |
|
1994/9/EC : 1994
|
DIRECTIVE 94/9/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 23 MARCH 1994 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
|
1997/23/EC : 1997
|
DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |
|
BS EN 60893-2:2004
|
Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Methods of test |
|
BS EN 1088 : 1995
|
SAFETY OF MACHINERY - INTERLOCKING DEVICES ASSOCIATED WITH GUARDS - PRINCIPLES FOR DESIGN AND SELECTION |