CEI EN 61800-4 : 2003

Current

Current The latest, up-to-date edition.

ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 4: GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR A/C/ POWER DRIVE SYSTEMS ABOVE 1000 V A.C. AND NOT EXCEEDING 35 KV

Available format(s): Hardcopy, PDF

Language(s): English - Italian

Published date: 01-01-2003

Publisher: Comitato Elettrotecnico Italiano

Table of Contents - (Show below) - (Hide below)

1 SCOPE
2 NORMATIVE REFERENCES
3 DEFINITIONS
4 OVERVIEW OF DRIVE SYSTEM TOPOLOGIES
5 SERVICE CONDITIONS
6 RATINGS
7 CONTROL PERFORMANCE REQUIREMENTS
8 PDS MAIN COMPONENTS
9 PDS INTEGRATION REQUIREMENTS
10 TESTS
11 EFFICIENCY DETERMINATION
ANNEX A (Informative) - MOST COMMONLY USED
        DRIVE SYSTEM TOPOLOGIES
ANNEX B (Informative) - SPEED CONTROL
        PERFORMANCE AND THE MECHANICAL
        SYSTEM
ANNEX C (Informative) - POWER SEMICONDUCTOR
        LOSSES
ANNEX ZA (Normative) - Normative references to
         international publications with their
         corresponding European publications

Abstract - (Show below) - (Hide below)

Pertains to adjustable speed a.c. drive systems that include power conversion, control equipment and a motor.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Standard
Status	Current
Publisher	Comitato Elettrotecnico Italiano
Development Note	Classificazione CEI 22-25 (10/2003)
Pages
ISBN
Committee	CT 301/22G

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
IEC 61800-4 : 1.0	Identical
EN 61800-4 : 2003	Identical
IEC 61800-4 : 1.0	Identical

Standards Referencing This Book - (Show below) - (Hide below)

IEC 60050-351 : 4.0	INTERNATIONAL ELECTROTECHNICAL VOCABULARY - PART 351: CONTROL TECHNOLOGY
IEC 61800-3 : 3.0	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS
IEC 60038 : 7.0	IEC STANDARD VOLTAGES
IEC 61800-2 : 2.0	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 2: GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE SPEED A.C. POWER DRIVE SYSTEMS
IEC 60146-1-3 : 3.0	SEMICONDUCTOR CONVERTORS - GENERAL REQUIREMENTS AND LINE COMMUTATED CONVERTORS - TRANSFORMERS AND REACTORS
IEC 60146-6 : 1.0	SEMICONDUCTOR CONVERTORS - APPLICATION GUIDE FOR THE PROTECTION OF SEMICONDUCTOR CONVERTORS AGAINST OVERCURRENT BY FUSES
EN 60721-3-1 : 1997	CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES - STORAGE
IEC 61000-2-4 : 2.0	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-4: ENVIRONMENT - COMPATIBILITY LEVELS IN INDUSTRIAL PLANTS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES
EN 60146-1-1 : 2010	SEMICONDUCTOR CONVERTERS - GENERAL REQUIREMENTS AND LINE COMMUTATED CONVERTERS - PART 1-1: SPECIFICATION OF BASIC REQUIREMENTS
IEC 60034-9 : 4.1	ROTATING ELECTRICAL MACHINES - PART 9: NOISE LIMITS
IEC 60034-7 : 0	ROTATING ELECTRICAL MACHINES - PART 7: CLASSIFICATION OF TYPES OF CONSTRUCTION, MOUNTING ARRANGEMENTS AND TERMINAL BOX POSITION (IM CODE)
EN ISO 1680 : 2013	ACOUSTICS - TEST CODE FOR THE MEASUREMENT OF AIRBORNE NOISE EMITTED BY ROTATING ELECTRICAL MACHINES (ISO 1680:2013)
EN 60034-1 : 2010 COR 2010	ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
CEI 2-3 : 1988 COR 1992	MACCHINE ELETTRICHE ROTANTI - PARTE 1: CARATTERISTICHE NOMINALI E DI FUNZIONAMENTO
EN 60034-18-31 : 2012	ROTATING ELECTRICAL MACHINES - PART 18-31: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - TEST PROCEDURES FOR FORM-WOUND WINDINGS - THERMAL EVALUATION AND CLASSIFICATION OF INSULATION SYSTEMS USED IN ROTATING MACHINES (IEC 60034-18-31:2012)
CEI 8-6 : 1998	NOMINAL VOLTAGES FOR LOW VOLTAGE PUBLIC ELECTRICITY SUPPLY SYSTEMS
IEC 60050-601 : 1.0	INTERNATIONAL ELECTROTECHNICAL VOCABULARY - GENERATION, TRANSMISSION AND DISTRIBUTION OF ELECTRICITY - GENERAL
IEC 60050-151 : 2.0	INTERNATIONAL ELECTROTECHNICAL VOCABULARY - ELECTRICAL AND MAGNETIC DEVICES
IEC 60050-441 : 2.0	INTERNATIONAL ELECTROTECHNICAL VOCABULARY - CHAPTER 441: SWITCHGEAR, CONTROLGEAR AND FUSES
CEI 2-14 : 1ED 1985	MACCHINE ELETTRICHE ROTANTI - SIGLE DI DESIGNAZIONE DELLE FORME COSTRUTTIVE E DEI TIPI DI INSTALLAZIONE
EN 60076-5 : 2006	POWER TRANSFORMERS - PART 5: ABILITY TO WITHSTAND SHORT-CIRCUIT
EN 61000-2-4 : 2002 COR 2014	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-4: ENVIRONMENT - COMPATIBILITY LEVELS IN INDUSTRIAL PLANTS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES (IEC 61000-2-4:2002)
HD 625.1 : 200S1	INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PRINCIPLES, REQUIREMENTS AND TESTS
IEC 60034-2A : 1.0	ROTATING ELECTRICAL MACHINES - METHODS FOR DETERMINING LOSSES AND EFFICIENCY OF ROTATING ELECTRICAL MACHINERY FROM TESTS (EXCLUDING MACHINES FOR TRACTION VEHICLES) - MEASUREMENT OF LOSSES BY THE CALORIMETRIC METHOD
IEC 60204-11 : 1.0	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1000 V A.C. OR 1500 V D.C. AND NOT EXCEEDING 36 KV
IEC 60076-5 : 3.0	POWER TRANSFORMERS - PART 5: ABILITY TO WITHSTAND SHORT CIRCUIT
CEI 14-41 : 2011	TAP-CHANGERS - PART 2: APPLICATION GUIDE
EN 61000-4-7 : 2002 AMD 1 2009	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-7: TESTING AND MEASUREMENT TECHNIQUES - GENERAL GUIDE ON HARMONICS AND INTERHARMONICS MEASUREMENTS AND INSTRUMENTATION, FOR POWER SUPPLY SYSTEMS AND EQUIPMENT CONNECTED THERETO (IEC 61000-4-7:2002/A1:2008)
EN 60034-7 : 93 AMD 1 2001	ROTATING ELECTRICAL MACHINES - PART 7: CLASSIFICATION OF TYPES OF CONSTRUCTION, MOUNTING ARRANGEMENTS AND TERMINAL BOX POSITION (IM CODE)
IEC 60050-551 : 2.0	INTERNATIONAL ELECTROTECHNICAL VOCABULARY - POWER ELECTRONICS
ISO 1680 : 2013(R2018)	ACOUSTICS - TEST CODE FOR THE MEASUREMENT OF AIRBORNE NOISE EMITTED BY ROTATING ELECTRICAL MACHINES
HD 472 : S1 COR 2013	NOMINAL VOLTAGES FOR LOW-VOLTAGE PUBLIC ELECTRICITY SUPPLY SYSTEMS
IEC 61136-1 : 1.0	SEMICONDUCTOR POWER CONVERTORS - ADJUSTABLE SPEED ELECTRIC DRIVE SYSTEMS - GENERAL REQUIREMENTS - RATING SPECIFICATIONS, PARTICULARLY FOR D.C. MOTOR DRIVES
CEI 14-42 : 2011	CONVERTER TRANSFORMERS - PART 3: APPLICATION GUIDE
EN 60034-14 : 2004 AMD 1 2007	ROTATING ELECTRICAL MACHINES - PART 14: MECHANICAL VIBRATION OF CERTAIN MACHINES WITH SHAFT HEIGHTS 56 MM AND HIGHER - MEASUREMENT, EVALUATION AND LIMITS OF VIBRATION SEVERITY
EN 60034-9 : 2005 AMD 1 2007	ROTATING ELECTRICAL MACHINES - PART 9: NOISE LIMITS
IEC 60076-8 : 1.0	POWER TRANSFORMERS - APPLICATION GUIDE
EN 60146-1-3 : 1993	SEMICONDUCTOR CONVERTORS - GENERAL REQUIREMENTS AND LINE COMMUTATED CONVERTORS - TRANSFORMERS AND REACTORS
EN 61136-1 : 1995	SEMICONDUCTOR POWER CONVECTORS - ADJUSTABLE SPEED ELECTRIC DRIVE SYSTEMS - GENERAL REQUIREMENTS - RATING SPECIFICATIONS, PARTICULARLY FOR D.C. MOTOR DRIVES
IEC 60146-1-1 : 4.0	SEMICONDUCTOR CONVERTERS - GENERAL REQUIREMENTS AND LINE COMMUTATED CONVERTERS - PART 1-1: SPECIFICATION OF BASIC REQUIREMENTS
IEC 60076-3 : 3.0	POWER TRANSFORMERS - PART 3: INSULATION LEVELS, DIELECTRIC TESTS AND EXTERNAL CLEARANCES IN AIR
EN 61800-2 : 2015	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 2: GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE SPEED A.C. POWER DRIVE SYSTEMS (IEC 61800-2:2015)
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV	DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE)
CEI 14-45 : 2012	POWER TRANSFORMERS DETERMINATION OF SOUND LEVELS - APPLICATION GUIDE
IEC 60076-1 : 3.0	POWER TRANSFORMERS - PART 1: GENERAL
IEC 60034-14 : 3.1	ROTATING ELECTRICAL MACHINES - PART 14: MECHANICAL VIBRATION OF CERTAIN MACHINES WITH SHAFT HEIGHTS 56 MM AND HIGHER - MEASUREMENT, EVALUATION AND LIMITS OF VIBRATION SEVERITY
IEC 60146-2 : 2.0	SEMICONDUCTOR CONVERTERS - PART 2: SELF-COMMUTATED SEMICONDUCTOR CONVERTERS INCLUDING DIRECT D.C. CONVERTERS
IEC 60721-3-2 : 2.0	CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - PART 3-2: CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES - TRANSPORTATION AND HANDLING
EN 60146-2 : 2000	SEMICONDUCTOR CONVERTERS - PART 2: SELF-COMMUTATED SEMICONDUCTOR CONVERTERS INCLUDING DIRECT D.C. CONVERTERS
CEI 70-1 : 1980 COR 1993
CEI 75-9 : 1ED 1990	CLASSIFICAZIONE DELLE CONDIZIONI AMBIENTALI - PARTE 3: CLASSIFICAZIONE DEI GRUPPI DI PARAMETRI AMBIENTALI E LORO SEVERITA - USO IN POSIZIONE FISSA IN LUOGHI PROTETTI DALLE INTEMPERIE
EN 60076-1 : 2011	POWER TRANSFORMERS - PART 1: GENERAL (IEC 60076-1:2011)
IEC 60034-1 : 13.0	ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
CEI 28-6 : 1ED 1997	COORDINAMENTO DELL'ISOLAMENTO PER GLI APPARECCHI NEI SISTEMI A BASSA TENSIONE - PARTE 1: PRINCIPI, PRESCRIZIONI E PROVE
IEC 60034-2 : 3.0	ROTATING ELECTRICAL MACHINES - METHODS FOR DETERMINING LOSSES AND EFFICIENCY OF ROTATING ELECTRICAL MACHINERY FROM TESTS (EXCLUDING MACHINES FOR TRACTION VEHICLES)
EN 60204-11 : 2000 COR 2010	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1000 V A.C. OR 1500 V D.C. AND NOT EXCEEDING 36 KV
IEC 61000-4-7 : 2.1	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-7: TESTING AND MEASUREMENT TECHNIQUES - GENERAL GUIDE ON HARMONICS AND INTERHARMONICS MEASUREMENTS AND INSTRUMENTATION, FOR POWER SUPPLY SYSTEMS AND EQUIPMENT CONNECTED THERETO
IEC 60721-3-3 : 2.2	CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - PART 3-3: CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES - STATIONARY USE AT WEATHERPROTECTED LOCATIONS
IEC 60146-1-2 : 4.0	SEMICONDUCTOR CONVERTORS - GENERAL REQUIREMENTS AND LINE COMMUTATED CONVERTORS - APPLICATION GUIDE
IEC 60076-2 : 3.0	POWER TRANSFORMERS - PART 2: TEMPERATURE RISE FOR LIQUID-IMMERSED TRANSFORMERS
EN 61800-3 : 2004 AMD 1 2012	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS (IEC 61800-3:2004/A1:2011)
IEC 60034-6 : 0	ROTATING ELECTRICAL MACHINES - METHODS OF COOLING (IC CODE)
IEC 60034-18-31 : 2.0	ROTATING ELECTRICAL MACHINES - PART 18-31: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - TEST PROCEDURES FOR FORM-WOUND WINDINGS - THERMAL EVALUATION AND CLASSIFICATION OF INSULATION SYSTEMS USED IN ROTATING MACHINES
IEC 60050-111 : 2.0	INTERNATIONAL ELECTROTECHNICAL VOCABULARY - PHYSICS AND CHEMISTRY
EN 60034-2 : 1996 AMD 2 1996	ROTATING ELECTRICAL MACHINES - PART 2: METHODS FOR DETERMINING LOSSES AND EFFICIENCY OF ROTATING ELECTRICAL MACHINERY FROM TESTS (EXCLUDING MACHINES FOR TRACTION VEHICLES)
EN 60721-3-2 : 1997	CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES - TRANSPORTATION
EN 60529 : 1991 COR 2016	DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
EN 61378-1 : 2011	CONVERTOR TRANSFORMERS - PART 1: TRANSFORMERS FOR INDUSTRIAL APPLICATIONS (IEC 61378-1:2011)
EN 60034-6 : 1993	ROTATING ELECTRICAL MACHINES - METHODS OF COOLING (IC CODE)
EN 60076-2 : 2011	POWER TRANSFORMERS - PART 2: TEMPERATURE RISE FOR LIQUID-IMMERSED TRANSFORMERS
EN 60726 : 2003	DRY-TYPE POWER TRANSFORMERS
IEC 60664-1 : 2.0	INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
IEC 61378-1 : 2.0	CONVERTOR TRANSFORMERS - PART 1: TRANSFORMERS FOR INDUSTRIAL APPLICATIONS
EN 60034-5 : 2001 AMD 1 2007	ROTATING ELECTRICAL MACHINES - PART 5: DEGREES OF PROTECTION PROVIDED BY THE INTEGRAL DESIGN OF ROTATING ELECTRICAL MACHINES (IP CODE) - CLASSIFICATION
IEC 60721-3-1 : 2.0	CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - PART 3-1: CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES - STORAGE
EN 60721-3-3 : 95 AMD 2 97	CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES - STATIONARY USE AT WEATHER-PROTECTED LOCATIONS
CEI 2-6 : 1ED 1976	MACCHINE ELETTRICHE ROTANTI - METODI DI DETERMINAZIONE, MEDIANTE PROVE, DELLE PERDITE E DEL RENDIMENTO

Add To Cart

Product Format

Quantity

add to cart

CEI EN 61800-4 : 2003

Table of Contents - (Show below) - (Hide below)

Abstract - (Show below) - (Hide below)

General Product Information - (Show below) - (Hide below)

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Standards Referencing This Book - (Show below) - (Hide below)

Add To Cart

Publisher

Category

Sub Category

Looking for Subscription Services?