Skip to content
Please enter a keyword to search

  • DD ISO/TS 5658-1:2006

    Current The latest, up-to-date edition.

    Reaction to fire tests. Spread of flame Guidance on flame spread

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  31-05-2007

    Publisher:  British Standards Institution

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    Introduction
    1 Scope
    2 Principles of flame spread
    3 Characteristics of flame-spread modes
      3.1 General
      3.2 Horizontal, facing upward
      3.3 Vertical or inclined
      3.4 Horizontal, facing downward
    4 History of surface spread of flame tests
    5 Small-scale tests
      5.1 Method given in ISO 5658-2
      5.2 LIFT method
      5.3 Method given in ISO 9239-1
      5.4 Method given in ISO 9239-2
    6 Intermediate-scale tests
      6.1 Corner tests
      6.2 Method given in ISO 5658-4
      6.3 Method given in ISO/TR 14696:1999
    7 Large-scale tests
      7.1 Room corner test (ISO 9705)
      7.2 Room/corridor scenarios
      7.3 Fagade scenarios
      7.4 Large-scale vertical flame-spread tests
    8 Flame spread within assemblies
    9 Flame spread by flaming droplets/particles
      9.1 Description of flame spread process with
          flaming droplets/particles
      9.2 Test methods to characterise flaming
          droplets/particles
      9.3 Typical fire scenarios involving flaming
          droplets/particles
    Bibliography

    Abstract - (Show below) - (Hide below)

    Offers guidance on flame spread tests. It specifies the principles of flame spread and classifies different flame-spread mechanisms.

    Scope - (Show below) - (Hide below)

    This Technical Specification provides guidance on flame spread tests. It describes the principles of flame spread and classifies different flame-spread mechanisms.

    General Product Information - (Show below) - (Hide below)

    Committee FSH/21/-/3
    Development Note Supersedes BS ISO TR 5658-1. (03/2010)
    Document Type Standard
    Publisher British Standards Institution
    Status Current
    Supersedes

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 60695-11-20:2015 Fire hazard testing - Part 11-20: Test flames - 500 W flame test method
    NEN 3883 : 1975
    NFP 92 505 : 1995 SAFETY AGAINST FIRE - BUILDING MATERIALS - REACTION TO FIRE TESTS - TEST USED FOR THERMAL MELTING MATERIALS - DRIPPING TEST
    ISO 5660-1:2015 Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
    ISO 5658-2:2006 Reaction to fire tests Spread of flame Part 2: Lateral spread on building and transport products in vertical configuration
    ISO 9705:1993 Fire tests Full-scale room test for surface products
    ISO 12468-1:2013 External exposure of roofs to fire Part 1: Test method
    ISO 5657:1997 Reaction to fire tests Ignitability of building products using a radiant heat source
    ISO 12992:2017 Plastics — Vertical flame spread determination for film and sheet
    DIN 4102-16:2015-09 Fire behaviour of building materials and building components - Part 16: "Brandschacht" tests
    ISO 11925-2:2010 Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test
    ISO 5658-4:2001 Reaction to fire tests — Spread of flame — Part 4: Intermediate-scale test of vertical spread of flame with vertically oriented specimen
    ASTM E 108 : 2017 : REDLINE Standard Test Methods for Fire Tests of Roof Coverings
    ISO/TR 14696:1999 Reaction to fire tests Determination of fire parameters of materials, products and assemblies using an intermediate-scale heat release calorimeter (ICAL)
    ISO/TR 3814:1989 Tests for measuring "reaction-to-fire" of building materials — Their development and application
    EN 13823:2010+A1:2014 REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM
    ISO/TR 9705-2:2001 Reaction-to-fire tests Full-scale room tests for surface products Part 2: Technical background and guidance
    DIN 4102-15:1990-05 FIRE BEHAVIOUR OF BUILDING MATERIALS AND BUILDING COMPONENTS - 'BRANDSCHACHT'
    ISO/TR 11696-1:1999 Uses of reaction to fire test results Part 1: Application of test results to predict fire performance of internal linings and other building products
    ISO 9772:2012 Cellular plastics Determination of horizontal burning characteristics of small specimens subjected to a small flame
    IEC 60695-11-10:2013 Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
    ISO 9239-2:2002 Reaction to fire tests for floorings — Part 2: Determination of flame spread at a heat flux level of 25 kW/m2
    UNI 9174 : 2010 REACTION TO FIRE OF PRODUCTS WHICH CAN BE HIT BY FLAME WITH RADIANT HEATING
    ISO 9239-1:2010 Reaction to fire tests for floorings Part 1: Determination of the burning behaviour using a radiant heat source
    ISO/TR 11696-2:1999 Uses of reaction to fire test results Part 2: Fire hazard assessment of construction products
    ASTM E 162 : 2016 : REDLINE Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
    NFP 92 506 : 1985 SAFETY AGAINST FIRE - BUILDING MATERIALS - REACTION TO FIRE TESTS - RADIANT PANEL TEST FOR FLOORING
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective