Skip to content
Please enter a keyword to search

  • DIN 254:2003-04

    Current The latest, up-to-date edition.

    GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF CONICAL TAPERS AND TAPER ANGLES - VALUES FOR SETTING TAPER ANGLES AND SETTING HEIGHTS

    Available format(s):  Hardcopy, PDF

    Language(s):  German, English

    Published date:  01-04-2003

    Publisher:  German Institute for Standardisation (Deutsches Institut für Normung)

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Vorwort
    Einleitung
    1 Anwendungsbereich
    2 Normative Verweisungen
    3 Begriffe und Symbole
    4 Zusätzliche Kegel, Werte für Einstellwinkel
      und Einstellhöhen
    Anhang A (informativ) Kegel für besondere
             Anwendungsgebiete
    Literaturhinweise

    Abstract - (Show below) - (Hide below)

    This standard is included in DIN Handbook 1, 1 E,14, 11-1, 151 and 167. Applies to conical tapers with taper angle alpha up to 165degree for general ranges of application. It does not apply to special cases such as bevel gear tooth systems. It is the purpose of these provisions to secure a reduction in the range of tools, gauges and measuring instruments required for manufacturing and testing through application of the recommended preferred values for conical tapers.

    General Product Information - (Show below) - (Hide below)

    Development Note Together with DIN EN ISO 1119 supersedes DIN 254:2000 (04/2003)
    Document Type Standard
    Product Note Together with DIN EN ISO 1119 supersedes DIN 254:2000 (ABM 04/2003)
    Publisher German Institute for Standardisation (Deutsches Institut für Normung)
    Status Current

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 8489-4:1995 Textile machinery and accessories — Cones for cross winding — Part 4: Dimensions, tolerances and designation of cones with half angle 4 degrees 20' for winding for dyeing purposes
    DIN 72311-4:1985-04 LEAD STORAGE BATTERIES - STARTER BATTERIES, TERMINALS, VENT PLUGS AND FILLER OPENINGS
    DIN 6388:1993-02 COLLETS FOR TOOL HOLDER WITH TAPER 1:10; COLLETS, HOLDER, NUTS
    DIN 64420-6:1976-04 CONES, HALF ANGLE OF THE CONE 9 DEG 15'; CONES, GAUGES
    DIN 238-2:1967-03 DRILL CHUCK MOUNTING ARRANGEMENTS - DRILL CHUCK TAPERS
    ISO 8434-1:2007 Metallic tube connections for fluid power and general use Part 1: 24 degree cone connectors
    DIN 69063-1:2008-08 MACHINE TOOLS - TOOL RECEIVER FOR HOLLOW TAPER SHANKS - PART 1: FOR TYPE A AND TYPE C ACCORDING TO DIN 69893, CONNECTING DIMENSIONS
    ISO 297:1988 7/24 tapers for tool shanks for manual changing
    ISO 1119:2011 Geometrical product specifications (GPS) — Series of conical tapers and taper angles
    DIN EN ISO 10651-4:2009-08 Lung ventilators - Part 4: Particular requirements for operator-powered resuscitators (ISO 10651-4:2002)
    DIN 3861:2016-09 NON-SOLDERING COMPRESSION FITTINGS - COMPRESSION RINGS - DESIGN
    ISO 8489-5:1995 Textile machinery and accessories — Cones for cross winding — Part 5: Dimensions, tolerances and designation of cones with half angle 5 degrees 57'
    DIN 158-1:1997-06 METRIC EXTERNAL TAPER SCREW THREADS AND MATING INTERNAL PARALLEL SCREW THREADS - PART 1: NOMINAL SIZES, LIMIT DEVIATIONS, LIMITS OF SIZE AND VERIFICATION
    ISO 595-2:1987 Reusable all-glass or metal-and-glass syringes for medical use Part 2: Design, performance requirements and tests
    DIN 3867:2012-02 NON-SOLDERING COMPRESSION COUPLINGS - PRESSURE BUSH FOR BUTT JOINTS
    DIN 204:1996-12 HAND REAMERS FOR MORSE TAPERS
    ISO 5356-1:2015 Anaesthetic and respiratory equipment Conical connectors Part 1: Cones and sockets
    ISO 10651-4:2002 Lung ventilators — Part 4: Particular requirements for operator-powered resuscitators
    DIN 69893-2:2013-11 (Draft) HOLLOW TAPER SHANKS WITH FLANGE CONTACT SURFACE - PART 2: HOLLOW TAPER SHANK TYPE B - DIMENSIONS AND DESIGN
    ISO 1483:2011 Slotted raised countersunk (oval) head tapping screws
    ISO 8382:1988 Resuscitators intended for use with humans
    DIN 2353:2013-01 NON-SOLDERING COMPRESSION FITTINGS WITH CUTTING RING - COMPLETE FITTINGS AND SURVEY
    ISO 1482:2011 Slotted countersunk (flat) head tapping screws
    DIN 3901:2001-09 NON-SOLDERING COMPRESSION FITTINGS WITH CUTTING RING - DOUBLE ENDED STUD ENDS WITH PARALLEL THREAD FOR STUD ENDS TYPE A
    DIN 2999-1:1983-07 PIPE THREADS FOR TUBES AND FITTINGS - PARALLEL INTERNAL THREAD AND TAPER EXTERNAL THREAD - TREAD DIMENSIONS
    ISO 8489-3:1995 Textile machinery and accessories — Cones for cross winding — Part 3: Dimensions, tolerances and designation of cones with half angle 4 degrees 20'
    DIN EN ISO 1119:2012-04 Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011)
    ISO 296:1991 Machine tools — Self-holding tapers for tool shanks
    ISO 595-1:1986 Reusable all-glass or metal-and-glass syringes for medical use Part 1: Dimensions
    ISO 8489-2:1995 Textile machinery and accessories — Cones for cross winding — Part 2: Dimensions, tolerances and designation of cones with half angle 3 degrees 30'
    IEC 60095-2:2009 Lead-acid starter batteries - Part 2: Dimensions of batteries and dimensions and marking of terminals
    ISO 575:1978 Textile machinery and accessories Transfer cones Half angle of the cone 4 degrees 20'
    DIN EN 1707:1997-01 CONICAL FITTINGS WITH A 6% (LUER) TAPER FOR SYRINGES, NEEDLES AND CERTAIN OTHER MEDICAL EQUIPMENT - LOCK FITTINGS
    DIN EN 20594-1:1995-01 CONICAL FITTINGS WITH A 6 % (LUER) TAPER FOR SYRINGES, NEEDLES AND CERTAIN OTHER MEDICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS
    DIN EN ISO 595-2:1994-10 REUSABLE ALL-GLASS OR METAL-AND-GLASS SYRINGES FOR MEDICAL USE - PART 2: DESIGN, PERFORMANCE REQUIREMENTS AND TESTS
    ISO 839-2:1977 Milling machine arbors with 7/24 tapers — Part 2: Accessories
    DIN EN 794-3:2009-12 Lung ventilators - Part 3: Particular requirements for emergency and transport ventilators; German version EN 794-3:1998+A2:2009
    ISO 239:1999 Drill chuck tapers
    ISO 839-1:2006 Milling machine arbors with 7/24 tapers Part 1: Dimensions and designation
    DIN 2080-1:2011-11 7/24 taper shanks for tools and clamping devices - Part 1: Type A
    ISO 368:2006 Spinning preparatory, spinning and doubling (twisting) machinery Tubes for ring-spinning, doubling and twisting spindles, taper 1:38 and 1:64
    DIN 2079:1987-08 7/24 TAPERS FOR SPINDLE NOSES FOR MACHINE TOOLS
    DIN 6364:2000-12 REDUCTION SLEEVES WITH EXTERNAL TAPER SHANK 7/24 FOR MORSE TAPER SHANK WITH TIGHTENING THREAD
    ISO 594-2:1998 Conical fittings with 6 % (Luer) taper for syringes, needles and certain other medical equipment Part 2: Lock fittings
    DIN EN ISO 8434-1:2016-10 (Draft) METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
    ISO 594-1:1986 Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment Part 1: General requirements
    DIN 2080-2:2011-11 7/24 taper shanks for tools and clamping devices - Part 2: Form B
    DIN 1895:2007-05 MACHINE REAMERS FOR MORSE TAPERS
    DIN EN 60095-2 : 1994 AMD 11 1996 LEAD-ACID STARTER BATTERIES; PART 2: DIMENSIONS OF BATTERIES AND DIMENSIONS AND MARKING OF TERMINALS
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective