|
EN 294:1992/AC:1993
|
SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS |
|
EN 1127-1:2011
|
Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
|
EN 1539:2015
|
Dryers and ovens, in which flammable substances are released - Safety requirements |
|
IEC 60079-1:2014 RLV
|
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
|
IEC 60079-10:2002
|
Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas |
|
EN 894-3:2000+A1:2008
|
Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators |
|
IEC 61000-6-4:2006+AMD1:2010 CSV
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS |
|
EN 418 : 1992
|
SAFETY OF MACHINERY - EMERGENCY STOP EQUIPMENT, FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN |
|
EN 61000-6-1:2007
|
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments |
|
EN 982:1996+A1:2008
|
Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
|
EN 1037:1995+A1:2008
|
Safety of machinery - Prevention of unexpected start-up |
|
EN 620:2002+A1:2010
|
Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials |
|
ISO 14122-3:2016
|
Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails |
|
EN 547-2:1996+A1:2008
|
Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings |
|
ISO 14122-1:2016
|
Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access |
|
EN 746-2:2010
|
Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems |
|
EN 60079-1:2014
|
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
|
EN 1088:1995+A2:2008
|
Safety of machinery - Interlocking devices associated with guards - Principles for design and selection |
|
EN 61000-6-3:2007/A1:2011/AC:2012
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS (IEC 61000-6-3:2006/A1:2010) |
|
EN 981:1996+A1:2008
|
Safety of machinery - System of auditory and visual danger and information signals |
|
ISO/TR 11688-1:1995
|
Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
|
EN 894-2:1997+A1:2008
|
Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays |
|
EN 971-1 : 1996
|
PAINTS AND VARNISHES - TERMS AND DEFINITIONS FOR COATING MATERIALS - PART 1: GENERAL TERMS |
|
EN 60079-29-1:2016
|
Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases |
|
EN 60079-0:2012/A11:2013
|
EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
|
ISO 7250:1996
|
Basic human body measurements for technological design |
|
IEC 60079-17:2013
|
Explosive atmospheres - Part 17: Electrical installations inspection and maintenance |
|
EN 60079-15:2010
|
Explosive atmospheres - Part 15: Equipment protection by type of protection "n" |
|
CR 954-100:1999
|
Safety of machinery - Safety-related parts of control systems - Part 100: Guide on the use and application of EN 954-1:1996 |
|
EN 1837:1999+A1:2009
|
Safety of machinery - Integral lighting of machines |
|
EN 999:1998+A1:2008
|
Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body |
|
EN 13463-1:2009
|
Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements |
|
EN 811 : 1996
|
SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE LOWER LIMBS |
|
EN 349:1993+A1:2008
|
Safety of machinery - Minimum gaps to avoid crushing of parts of the human body |
|
EN 13478:2001+A1:2008
|
Safety of machinery - Fire prevention and protection |
|
IEC 60204-1:2016
|
Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
|
EN 547-1:1996+A1:2008
|
Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery |
|
IEC 60079-18:2014 RLV
|
Explosive atmospheres - Part 18: Equipment protection by encapsulation “m” |
|
IEC 61000-6-1 : 3.0
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS |
|
EN 12978:2003+A1:2009
|
Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods |
|
EN 1760-1:1997+A1:2009
|
Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors |
|
EN 1050 : 1996
|
SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT |
|
EN 60079-6:2015
|
Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o" |
|
EN 614-1:2006+A1:2009
|
Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
|
EN ISO 11688-2 : 2000
|
ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 2: INTRODUCTION TO THE PHYSICS OF LOW-NOISE DESIGN |
|
ISO 14122-4:2016
|
Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders |
|
IEC 60079-5:2015 RLV
|
Explosive atmospheres - Part 5: Equipment protection by powder filling "q" |
|
EN 14986:2017
|
Design of fans working in potentially explosive atmospheres |
|
EN 12445:2000
|
Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Test methods |
|
EN 574:1996+A1:2008
|
Safety of machinery - Two-hand control devices - Functional aspects - Principles for design |
|
EN 563:1994/A1:1999/AC:2000
|
SAFETY OF MACHINERY - TEMPERATURES OF TOUCHABLE SURFACES - ERGONOMICS DATA TO ESTABLISH TEMPERATURE LIMIT VALUES FOR HOT SURFACES |
|
EN 60079-11:2012
|
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
|
IEC 61000-6-3:2006+AMD1:2010 CSV
|
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
|
IEC 60079-11:2011
|
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
|
EN 619:2002+A1:2010
|
Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads |
|
EN 626-2:1996+A1:2008
|
Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures |
|
EN ISO 12100-1:2003/A1:2009
|
SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY |
|
EN ISO 14122-3:2016
|
Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2016) |
|
EN 809 : 1998 COR 2010
|
PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
|
EN 61496-1:2013/AC:2015
|
SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 61496-1:2012) |
|
EN 60079-25:2010/AC:2013
|
EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS (IEC 60079-25:2010) |
|
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code) |
|
EN 953:1997+A1:2009
|
Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
|
EN 842:1996+A1:2008
|
Safety of machinery - Visual danger signals - General requirements, design and testing |
|
EN 61000-6-4:2007/A1:2011
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS |
|
IEC 60079-25:2010
|
Explosive atmospheres - Part 25: Intrinsically safe electrical systems |
|
EN 547-3:1996+A1:2008
|
Safety of machinery - Human body measurements - Part 3: Anthropometric data |
|
EN ISO 14122-4:2016
|
Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2016) |
|
IEC 60079-6:2015
|
Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o" |
|
EN ISO 14122-2:2016
|
Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2016) |
|
IEC 60079-0:2011
|
Explosive atmospheres - Part 0: Equipment - General requirements |
|
EN 60079-10:2003
|
Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas |
|
ISO 12100-2:2003
|
Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
|
IEC 61000-6-1:2016
|
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments |
|
EN ISO 12100-2:2003/A1:2009
|
SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES |
|
IEC 61496-1:2012
|
Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests |
|
IEC 61000-6-4:2006+AMD1:2010 CSV
|
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
|
EN 983:1996+A1:2008
|
Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics |
|
EN 954-1 : 1996
|
SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN |
|
ISO 12100-1:2003
|
Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
|
EN 60079-5:2015
|
Explosive atmospheres - Part 5: Equipment protection by powder filling "q" |
|
EN 50073:1999
|
Guide for selection, installation, use and maintenance of apparatus for the detection and measurement of combustible gases or oxygen |
|
IEC 61310-1:2007
|
Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
|
EN ISO 7250 : 1997
|
BASIC HUMAN BODY MEASUREMENTS FOR TECHNOLOGICAL DESIGN |
|
EN 626-1:1994+A1:2008
|
Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers |
|
EN 60079-17:2014
|
Explosive atmospheres - Part 17: Electrical installations inspection and maintenance |
|
EN 1760-2:2001+A1:2009
|
Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars |
|
EN 13463-5:2011
|
Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c' |
|
EN 60529:1991/AC:2016-12
|
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
|
ISO 14122-2:2016
|
Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways |
|
EN ISO 11688-1:2009
|
Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
|
EN ISO 14122-1:2016
|
Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016) |
|
ISO/TR 11688-2:1998
|
Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design |
|
EN 61310-1:2008
|
Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
|
EN 14462:2015
|
Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3 |
|
EN 1838:2013
|
Lighting applications - Emergency lighting |
|
IEC 60079-15:2010
|
Explosive atmospheres - Part 15: Equipment protection by type of protection "n" |
|
EN 525:2009
|
Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW |
|
EN 60204-1 : 2006 COR 2010
|
SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
|
EN 60079-2:2014/AC:2015
|
EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P' (IEC 60079-2:2014) |
|
EN 894-1:1997+A1:2008
|
Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators |