Skip to content
Please enter a keyword to search

  • DIN EN 13035-2:2008-10

    Current The latest, up-to-date edition.

    MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 2: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT OUTSIDE THE FACTORY

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  01-01-2008

    Publisher:  German Institute for Standardisation (Deutsches Institut für Normung)

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Vorwort
    Einleitung
    1 Anwendungsbereich
    2 Normative Verweisungen
    3 Begriffe
      3.1 Allgemeine Begriffe
      3.2 Begriffe, die Einrichtungen betreffen
    4 Liste der signifikanten Gefährdungen
      4.1 Allgemeines
      4.2 Während des Transportierens
      4.3 Während des Beladens und Abladens
      4.4 Flachglastransport durch Innenlader
    5 Sicherheitsanforderungen und/oder Schutzmassnahmen
      5.1 Allgemeines
      5.2 Allgemeine Anforderungen
      5.3 Neigungswinkel
      5.4 Glas-Festhaltesysteme
      5.5 Träger und Abdeckmaterial
      5.6 Spezielle Transportsysteme
          5.6.1 Innenlader-Fahrzeug
          5.6.2 Reff an Lkw und Transporter
          5.6.3 Gestelle und Paletten
      5.7 Vakuum-Hebeeinrichtung
    6 Feststellung der Übereinstimmung mit den Sicherheitsanforderungen
      und/oder Schutzmassnahmen
    7 Benutzerinformation
      7.1 Allgemeines
      7.2 Signale und Warneinrichtungen
      7.3 Begleitende Dokumente
      7.4 Kennzeichnung
    Anhang A (informativ) - Verschiedene Ausführungen von Einrichtungen
    Anhang B (informativ) - Hinweise für Festhalteeinrichtungen für Glas
           B.1 Hydraulisch und pneumatisch bewegte Halteeinrichtungen
           B.2 Luftkissen/Kissen
           B.3 (Sicherungs-)Stangen als Mittel zum Festhalten auf Reffs
           B.4 Schutz von Gurten gegen Einwirkung durch Glas mit Hilfe
               von Kantenschutz
           B.5 (Ratschen-)Zurrgurte
    Anhang C (informativ) - Symbole für Schilder und Zeichen
    Anhang ZA (informativ) - Zusammenhang zwischen dieser Europäischen
                             Norm und den grundlegenden Anforderungen
                             der EG-Richtlinie 98/37/EG
    Anhang ZB (informativ) - Zusammenhang zwischen dieser Europäischen
                             Norm und den grundlegenden Anforderungen
                             der EU-Richtlinie 2006/42/EG
    Literaturhinweise
    Bilder
    Tabellen

    Abstract - (Show below) - (Hide below)

    Specifies the requirements for safety for the design and installation of equipment intended for the storage, handling and transportation of flat glass outside the factory and including stillages, pallets, frails fixed to vehicles, in-loader vehicles, specific glass-securing devices, stanchions and vacuum-lifting devices which are used for road transport and on building sites.

    General Product Information - (Show below) - (Hide below)

    Development Note THE 2020 DRAFT VERSION HAS RELEASED FOR THE STANDARD DIN EN 13035-2
    Document Type Standard
    Publisher German Institute for Standardisation (Deutsches Institut für Normung)
    Status Current

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 294:1992/AC:1993 SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS
    ISO 11202:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
    EN 1037:1995+A1:2008 Safety of machinery - Prevention of unexpected start-up
    ISO 14122-3:2016 Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails
    ISO 14122-1:2016 Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access
    EN 13155:2003+A2:2009 Cranes - Safety - Non-fixed load lifting attachments
    EN 13035-3:2003 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines
    EN 1088:1995+A2:2008 Safety of machinery - Interlocking devices associated with guards - Principles for design and selection
    EN 981:1996+A1:2008 Safety of machinery - System of auditory and visual danger and information signals
    EN 13035-9:2006+A1:2010 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations
    EN 13035-6:2006+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break-out
    EN 13394:2001 Packaging - Specification for non-metallic tensional strapping
    EN 12195-1:2010/AC:2014 LOAD RESTRAINING ON ROAD VEHICLES - SAFETY - PART 1: CALCULATION OF SECURING FORCES
    EN 999:1998+A1:2008 Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body
    DIN 4844-1:2012-06 GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - PART 1: OBSERVATION DISTANCES AND COLORIMETRIC AND PHOTOMETRIC REQUIREMENTS
    IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
    EN ISO 13850:2015 Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015)
    EN 13393:2001 Packaging - Specification for Edge protectors
    ISO 14122-4:2016 Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders
    EN 12195-2:2000 Load restraint assemblies on road vehicles - Safety - Part 2: Web lashing made from man-made fibres
    EN ISO 11201:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)
    EN ISO 12100-1:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
    EN ISO 14122-3:2016 Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2016)
    EN 953:1997+A1:2009 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
    EN 13035-1:2008 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 1: Storage, handling and transportation equipment inside the factory
    EN ISO 14122-4:2016 Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2016)
    EN ISO 14122-2:2016 Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2016)
    EN 13035-5:2006+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5: Machines and installations for stacking and de-stacking
    ISO 12100-2:2003 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
    EN ISO 12100-2:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
    ISO 3864-1:2011 Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings
    EN 983:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics
    EN 954-1 : 1996 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
    ISO 12100-1:2003 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
    ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
    EN 13035-4:2003+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables
    EN 13246:2001 Packaging - Specification for tensional steel strapping
    ISO 14122-2:2016 Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways
    EN 13035-7:2006+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass
    EN ISO 14122-1:2016 Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016)
    EN ISO 11202:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)
    ISO 11201:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
    EN 13035-11:2006+A1:2010 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines
    EN 60204-1 : 2006 COR 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective