Skip to content
Please enter a keyword to search

  • DIN EN 1474-1:2009-03

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS

    Available format(s):  Hardcopy, PDF

    Superseded date:  01-11-2016

    Language(s):  English

    Published date:  01-01-2009

    Publisher:  German Institute for Standardisation (Deutsches Institut für Normung)

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Vorwort
    1 Anwendungsbereich
    2 Normative Verweisungen
    3 Begriffe
    4 Auslegung der Ladearme
       4.1 Definition der Länge und der Anordnung
            der Ladearme, Beschreibung der Arme
            4.1.1 Allgemeines
            4.1.2 Gleichgewicht
            4.1.3 Masse und Mindestabstände der Arme
       4.2 Konstruktionsgrundlage
            4.2.1 Durchmesser der Produktrohre und
                  Produktdaten
            4.2.2 Werkstoffe und Klassen
       4.3 Drehgelenke
            4.3.1 Allgemeines
            4.3.2 Produktdichtung
            4.3.3 Lagerung
            4.3.4 Äussere Dichtungsanordnung
            4.3.5 Auslegung
       4.4 Traglager
            4.4.1 Zyklische Bewegungen
            4.4.2 Montage der Traglager
            4.4.3 Schutz der Traglager
            4.4.4 Probenahmestellen für Schmiermittel
       4.5 Zubehör
            4.5.1 Verstellbare Abstützung
            4.5.2 Stickstoffeinblaseleitung
            4.5.3 Verriegelungseinrichtung in Ruhestellung
            4.5.4 Leitern und Arbeitsbühnen
            4.5.5 Leitung für Flüssigstickstoff
            4.5.6 Thermische Isolation
       4.6 Rohrleitungen und Armaturen
       4.7 Schweissen
            4.7.1 Eignung
            4.7.2 Schweisselektroden
       4.8 Korrosionsschutz, Feuersicherheit und
            Schutz vor Versprödung
            4.8.1 Korrosionsschutz
            4.8.2 Schutz vor Versprödung
       4.9 Wartung
    5 Sicherheitssysteme
       5.1 Allgemeines
       5.2 Zweistufiges Alarm- und Abschaltsystem
            5.2.1 Erste Stufe
            5.2.2 Zweite Stufe
       5.3 Überwachungs- und Alarmsysteme
            5.3.1 Positions-Alarmsystem der Arme
            5.3.2 Kontinuierliches Positionsüberwachungssystem
                  (CPMS)
            5.3.3 Alarm für Druck und Hydraulikstand
       5.4 Definition der Alarmbereiche
       5.5 Sicherheitseinrichtungen
            5.5.1 Allgemeines
            5.5.2 Sicherheitseinrichtungen bei
                  Notfalltrennsystemen (ERS)
            5.5.3 Anforderungen zur Feuersicherheit
            5.5.4 Elektrische Sicherheitsanforderungen
            5.5.5 Ausfall der Stromversorgung
            5.5.6 Schutz gegen Kriechströme
            5.5.7 Masseverbindung
    6 Verbindung mit dem Schiff
       6.1 Allgemeines
       6.2 QCDC-Körper
       6.3 QCDC-System
    7 Hydraulisches und elektrisches Steuerungssystem
       7.1 Allgemeines
       7.2 Bedienung der Arme
       7.3 Hydraulische Bauteile
       7.4 Elektrische Bauteile
       7.5 Prüfung der Steuersysteme
       7.6 Fernbedienung
       7.7 Ausrüstung der Anlegerbrücke im Freien
    8 Inspektion und Prüfungen
       8.1 Allgemeines
       8.2 Baumusterprüfung
            8.2.1 Drehgelenke
            8.2.2 ERS
            8.2.3 QCDC
       8.3 Herstellung
            8.3.1 Werkstoffe
            8.3.2 Zerstörungsfreie Prüfung
            8.3.3 Prüfung des Isolationsflansches
                  (Kriechstromschutz)
       8.4 Werksprüfungen
            8.4.1 Drehgelenk
            8.4.2 Prüfung des Traglagers
            8.4.3 ERS
            8.4.4 QCDC
            8.4.5 Prüfung des Isolationsflansches
                  (Kriechstromschutz)
            8.4.6 Prüfung des Hydraulikkreislaufs
            8.4.7 Ladearm-Baugruppenprüfung
            8.4.8 Abnahmeprüfung am Aufstellungsort
    9 Qualitätssicherung und Kontrolle
       9.1 Qualitätssystem
       9.2 Qualitätsplan
    10 Erforderliche Dokumentation
       10.1 Dokumentation zur Ausschreibung
       10.2 Vertragsdokumentation
    Anhang A (informativ) Werkstoffe
    Anhang B (informativ) Kontinuierliches
             Positionsüberwachungssystem (CPMS)
    Anhang C (informativ) Vorschläge für
             Alarmeinstellungen und ESD/ERS-Betätigung
    Anhang D (normativ) Tabellen D.1 bis D.17
             und Bilder D.1 bis D.4
    Anhang E (informativ) Bilder E.1 bis E.3
    Literaturhinweise

    Abstract - (Show below) - (Hide below)

    Describes the design, minimum safety requirements and inspection and testing procedures for liquefied natural gas (LNG) transfer arms intended for use on conventional onshore (LNG) terminals. It also covers the minimum requirements for safe LNG transfer between ship and shore.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes DIN EN 1474. (03/2009)
    Document Type Standard
    Publisher German Institute for Standardisation (Deutsches Institut für Normung)
    Status Superseded
    Superseded By
    Supersedes

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 60079-1:2014 RLV Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
    EN 10269:2013 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
    IEC 60079-10:2002 Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas
    EN 1514-1:1997 Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts
    EN 12560-6:2003 Flanges and their joints - Gaskets for Class-designated flanges - Part 6: Covered serrated metal gaskets for use with steel flanges
    EN 12560-1:2001 Flanges and their joints - Gaskets for Class-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts
    EN 12560-3:2001 Flanges and their joints - Gaskets for Class-designated flanges - Part 3: Non-metallic PTFE envelope gaskets
    EN 60079-1:2014 Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
    EN 12560-2:2013 Flanges and their joints - Dimensions of gaskets for Class-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges
    EN 60079-0:2012/A11:2013 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED)
    EN 1759-1:2004 Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24
    EN ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009)
    EN 1714:1997/A2:2003 NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING OF WELDED JOINTS
    EN 12560-4:2001 Flanges and their joints - Gaskets for Class-designated flantes - Part 4: Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges
    EN 13463-1:2009 Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements
    EN 10088-3:2014 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
    IEC 60079-18:2014 RLV Explosive atmospheres - Part 18: Equipment protection by encapsulation “m”
    EN 12266-2:2012 Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements
    EN 12516-1:2014 Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells
    ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods
    EN 12516-4:2014 Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
    EN 60079-6:2015 Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"
    EN 10088-2:2014 STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
    EN 473:2008 Non-destructive testing - Qualification and certification of NDT personnel - General principles
    IEC 60079-5:2015 RLV Explosive atmospheres - Part 5: Equipment protection by powder filling "q"
    EN 1473:2016 Installation and equipment for liquefied natural gas - Design of onshore installations
    EN 910 : 1996 DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS
    EN 12266-1:2012 Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements
    EN 60079-11:2012 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
    IEC 60079-11:2011 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
    EN 62305-3:2011 Protection against lightning - Part 3: Physical damage to structures and life hazard
    EN 13463-8:2003 Non-electrical equipment for potentially explosive atmospheres - Part 8: Protection by liquid immersion 'k'
    EN ISO 1460 : 1994 METALLIC COATINGS - HOT DIP GALVANIZED COATINGS ON FERROUS MATERIALS - GRAVIMETRIC DETERMINATION OF THE MASS PER UNIT AREA
    EN 1092-4:2002 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges
    EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
    EN 60079-25:2010/AC:2013 EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS (IEC 60079-25:2010)
    EN 875:1995 Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination
    IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
    EN 12516-3:2002/AC:2003 VALVES - SHELL DESIGN STRENGTH - PART 3: EXPERIMENTAL METHOD
    EN 12308 : 1998 INSTALLATIONS AND EQUIPMENT FOR LNG - SUITABILITY TESTING OF GASKETS DESIGNED FOR FLANGED JOINTS USED ON LNG PIPING
    IEC 60079-25:2010 Explosive atmospheres - Part 25: Intrinsically safe electrical systems
    EN 13463-2:2004 Non-electrical equipment for use in potentially explosive atmospheres - Part 2: Protection by flow restricting enclosure 'fr'
    IEC 60079-6:2015 Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"
    IEC 60079-0:2011 Explosive atmospheres - Part 0: Equipment - General requirements
    EN 1160 : 1996 INSTALLATIONS AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - GENERAL CHARACTERISTICS OF LIQUEFIED NATURAL GAS
    EN 10204:2004 Metallic products - Types of inspection documents
    EN 60079-10:2003 Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas
    EN ISO 10497:2010 Testing of valves - Fire type-testing requirements (ISO 10497:2010)
    ISO 9001:2015 Quality management systems — Requirements
    ISO 9000:2015 Quality management systems — Fundamentals and vocabulary
    EN 1532 : 1997 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - SHIP TO SHORE INTERFACE
    EN 60079-5:2015 Explosive atmospheres - Part 5: Equipment protection by powder filling "q"
    ISO 10497:2010 Testing of valves — Fire type-testing requirements
    ISO 1460:1992 Metallic coatings Hot dip galvanized coatings on ferrous materials Gravimetric determination of the mass per unit area
    EN 13463-5:2011 Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c'
    EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
    EN 12560-5:2001 Flanges and their joints - Gaskets for Class-designated flanes - Part 5: Metallic ring joint gaskets for use with steel flanges
    EN 12567:2000 Industrial valves - Isolating valves for LNG - Specification for suitability and appropriate verification tests
    EN 12516-2:2014 Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells
    EN 571-1:1997 Non destructive testing - Penetrant testing - Part 1: General principles
    EN 1991-1-4:2005/A1:2010 EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-4: GENERAL ACTIONS - WIND ACTIONS
    IEC 62305-3:2010 Protection against lightning - Part 3: Physical damage to structures and life hazard
    EN ISO 9000:2015 Quality management systems - Fundamentals and vocabulary (ISO 9000:2015)
    EN 1435:1997/A2:2003 NON-DESTRUCTIVE TESTING OF WELDS - RADIOGRAPHIC TESTING OF WELDED JOINTS
    EN 60034-5:2001/A1:2007 ROTATING ELECTRICAL MACHINES - PART 5: DEGREES OF PROTECTION PROVIDED BY THE INTEGRAL DESIGN OF ROTATING ELECTRICAL MACHINES (IP CODE) - CLASSIFICATION
    EN 287-1:2011 Qualification test of welders - Fusion welding - Part 1: Steels
    EN 60079-2:2014/AC:2015 EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P' (IEC 60079-2:2014)
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective