DIN ISO 2859-1:2014-08

Current

Current The latest, up-to-date edition.

SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 1: SAMPLING SCHEMES INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION (ISO 2859-1:1999 + COR. 1:2001 + AMD.1:2011)

Available format(s): Hardcopy, PDF

Language(s): German - English

Published date: 01-08-2014

Publisher: German Institute for Standardisation (Deutsches Institut für Normung)

Abstract - (Show below) - (Hide below)

This Standard is included in DIN Handbook 225 and 225-1.

General Product Information - (Show below) - (Hide below)

Committee	TC 69
Development Note	Supersedes DIN 40080 (07/2002)
Document Type	Standard
ISBN
Pages
Published
Publisher	German Institute for Standardisation (Deutsches Institut für Normung)
Status	Current
Supersedes	DIN 40080:1979-04 DIN ISO 2859-1:2004-01

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
IEC 60410:1973	Identical
ISO 2859:1974	Identical
ISO 2859-1:1999	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

BWB TL 8920-0006 : 9ED 2007	CRUSHED RYE BREAD
DIN EN 16728:2016-07	LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE LPG CYLINDERS OTHER THAN TRADITIONAL WELDED AND BRAZED STEEL CYLINDERS - PERIODIC INSPECTION
BWB TL 4820-0024 : 2ED 2004
BWB TL 8970-0009 : 1ED 2004
BWB TL 4240-0057 : 1ED 2002	SPECIAL FILTER, NBC PROTECTION, FLYING PERSONNEL
DIN EN 16256-3:2013-03	PYROTECHNIC ARTICLES - THEATRICAL PYROTECHNIC ARTICLES - PART 3: REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE
DIN EN 16265:2016-05	PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - IGNITION DEVICES
BWB TL 8115-0007 : 4ED 2005	LEBENSMITTEL-TRANSPORTBEHAELTER FUER VERPACKTE LEBENSMITTEL UND TRANSPORT-KISTE
BWB TL 7320-0068 : 1ED 2004	FELDKUECHENARBEITSTISCHE MIT AUFNAHME FUER GEWUERZBEHAELTER UND KUECHENKLEINGERAET
BWB TL 4240-0060 : 1ED 2002	COMBINATION FILTER, 60 CBM/HOUR, FOR NBC OVERPRESSURE SYSTEM
BWB TL 8465-0038 : 3ED 1999	BOX, SANDWICH SPREAD
BWB TL 4020-0027 : 3ED 2003	RESCUE ROPE, 8 MM DIAMETER, 30 M, WITH SPRING HOOK ON ONE SIDE
BWB TL 7360-0045 : 2ED 2005
BWB TL 6530-0092 : 2ED 2002
BWB TL 8455-0162 : 1ED 2003
BWB TL 6530-0096 : 4ED 2004	STRETCHER CHASSIS, IN CONTAINER
BWB TL 4240-0017 : 1ED 2002	SCREW FILTER, NON MAGNETIZABLE FOR NBC PROTECTIVE MASK
BWB TL 4220-0026 : 1ED 2002	LIFE RAFT, 10 MAN, INFLATABLE; LIFE RAFT, 20 MAN, INFLATABLE
DIN EN ISO 1797:2016-05 (Draft)	DENTISTRY - SHANKS FOR ROTARY AND OSCILLATING INSTRUMENTS (ISO 1797:2017)
DIN EN 60255-23 : 1997	ELECTRICAL RELAYS - PART 23: CONTACT PERFORMANCE
BWB TL 8140-0060 : 7ED 2007	REPAIR/REFURBISHMENT OF AMMUNITION BOXES, WOOD, PLYWOOD
DIN 7081:1999-05	PRESSURE RESISTANT OBLONG SIGHT GLASSES OF BOROSILICATE GLASS WITHOUT LIMITATION IN THE RANGE OF LOW TEMPERATURE
BWB TL 8470-0067 : 4ED 2006	ARMOR VEST, MILITARY POLICE
BWB TL 6530-0094 : 4ED 2007	HEADREST FOR COVER, STRETCHER
DIN ISO 3534-2:2013-12	STATISTICS - VOCABULARY AND SYMBOLS - PART 2: APPLIED STATISTICS (ISO 3534-2:2006)
BWB TL 7125-0023 : 5ED 2005	CONTAINER WITH INSERT FOR CLASSIFIED MATERIAL
DIN 9088:2002-11	AEROSPACE SERIES - STORAGE LIFE OF RUBBER PRODUCTS
DIN EN 60926 : 2000	AUXILIARIES FOR LAMPS - STARTING DEVICES (OTHER THAN GLOW STARTERS) - GENERAL AND SAFETY REQUIREMENTS
VDE 0712-14 : 2000	AUXILIARIES FOR LAMPS - STARTING DEVICES (OTHER THAN GLOW STARTERS) - GENERAL AND SAFETY REQUIREMENTS
DIN EN 1006:2009-10	Advanced technical ceramics - Monolithic ceramics - Guidance on the selection of test pieces for the evaluation of properties
DIN EN 16263-4:2015-11	PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - PART 4: TEST METHODS
DIN 17455:1999-02	WELDED CIRCULAR STAINLESS STEEL TUBES WITH GENERAL QUALITY REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS
DIN 65591:1998-12	AEROSPACE - BROAD WOVEN FABRIC, UNCOATED - TECHNICAL SPECIFICATION
DIN HDBK 225 : 3ED 2005
DIN EN 16728 E : 2016	LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE LPG CYLINDERS OTHER THAN TRADITIONAL WELDED AND BRAZED STEEL CYLINDERS - PERIODIC INSPECTION
DIN EN 14241-1:2013-11	CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS
DIN EN ISO 12947-3:2007-04	Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 3: Determination of mass loss (ISO 12947-3:1998 + Cor. 1:2002) (includes Corrigendum AC:2006)
DIN EN 14035-38:2006-05	FIREWORKS - PART 38: SHOT TUBES - SPECIFICATION AND TEST METHODS
DIN EN 12899-4:2008-02	Fixed, vertical road traffic signs - Part 4: Factory production control
DIN EN ISO 9163:2005-07	Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:2005); German version EN ISO 9163:2005
DIN 6799:2011-04	RETAINING WASHERS FOR SHAFTS
DIN EN 133200 : 2000	SECTIONAL SPECIFICATION - PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (FILTERS, FOR WHICH SAFETY TESTS ARE REQUIRED)
BWB TL 8315-0018 : 7ED 2012	UNIFORM BUTTONS METAL FOR ARMY AND AIR FORCE
BWB TL 4210-0119 : 3ED 1995	FIRE FIGHTING CART, POWDER, PG 50, FIRE CLASSIFICATION A, B, C
BWB TL 4240-0018 : 3ED 1999	SHIPS FILTER, SUSPENDED MATTER (600 AND 1200), SHIPS FILTER, GAS (400 AND 600)
BWB TL 2540-0048 : 1ED 2005	FAHRZEUGLEITER FUER FELDKUECHENRUESTSATZ (HANDLAUF, GESCHLOSSEN) TFK 250
BWB TL 6230-0074 : 2ED 2003	SPOTLIGHT, PORTABLE, FLASH AND LONG-DISTANCE, EXPLOSION-PROOF
BWB TL 7310-0030 : 1ED 2005	DRUCKKOCH-/DRUCKBRATKESSEL, CONTAINERKUECHE ISO 20 FUSZ, ZUCON FELDKUECHENCONTAINER ISO 20 FUSZ, RK
BWB TL 7320-0072 : 1ED 2005
BWB TL 6545-0055 : 3ED 2008
BWB TL 7360-0022 : 2ED 2004	BURNER FOR FIELD KITCHEN TRAILER
BWB TL 8470-0068 : 4ED 2009	ARMOR VEST, SPECIAL FORCES, 5 COLOR CAMOUFLAGE PRINT BUNDESWEHR
BWB TL 2040-0010 : 4ED 2000	DRAW BUCKET WITH TAIL
BWB TL 4220-0046 : 4ED 2006	LIFE JACKET, INFLATABLE, WITH INTEGRATED IMMERSION SUIT
DIN EN 14035-31:2006-01	FIREWORKS - PART 31: SHELL-IN-MORTARS - SPECIFICATION AND TEST METHODS
BWB TL 4240-0065 : 2ED 2006	FILTER, NON-MAGNETISABLE, FOR CBRN PROTECTIVE MASK M2000
DIN EN 16475-2:2013-08 (Draft)	CHIMNEYS - ACCESSORIES - PART 2: CHIMNEY FANS - REQUIREMENTS AND TEST METHODS
DIN EN 160201:1998-05	BLANK DETAIL SPECIFICATION - MICROWAVE MODULAR ELECTRONIC UNITS OF ASSESSED QUALITY - CAPABILITY APPROVAL
VDE 0212-2 : 1999	OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS
BWB TL 8940-0007-001 : 4ED 2007	DESSERTS - GENERAL CONDITIONS
BWB TL 5430-0006 : 5ED 2003	CONTAINER, COLLAPSIBLE, WITH ACCESSORIES, 1000 L WATER
DIN EN 133000 : 1997	GENERIC SPECIFICATION - PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION
VDE 0419-1 : 94 AMD 2 99	TIME SWITCHES FOR TARIFF AND LOAD CONTROL
BWB TL 2040-0014 : 3ED 2000	GRAPNEL ANCHOR
BWB TL 7240-0029 : 3ED 2002	ABFUELLSTUTZEN, FLEXIBEL FUER 5 L KANISTER UND 20 L EINHEITSKANISTER (STAHL)
BWB TL 4240-0040 : 6ED 2001	600 M[3]/H SHIP FILTERS, COMPACT OR SEGMENTED VERSION, FOR NBC PROTECTION UNITS
BWB TL 2540-0026 : 5ED 2000	VIBRATION DAMPER FOR MBT LEOPARD 1, ANTI-AIRCRAFT TANK GEPARD, ARMOURED INFANTRY COMBAT VEHICLE MARDER, ARMOURED ANTI-TANK VEHICLES JAGUAR 1 & 2
BWB TL 5120-0011 : 6ED 2008	ENTRENCHING TOOL
BWB TL 4820-0023 : 1ED 2004
BWB TL 7110-0060 : 3ED 2001	BRACKET FOR FIELD DESK
BWB TL 4240-0061 : 1ED 1996	SHIP`S FILTER 300, NBC, NATO
BWB TL 5120-0018 : 3ED 2000	CHAIN HOOK
BWB TL 8315-0048 : 2ED 2001	UNIFORM BUTTONS METAL FOR NAVY
BWB TL 3655-0016 : 4ED 1999	TRANSPORT- AND STORAGE CONTAINER FOR LIQUID BREATHING OXYGEN, 2000 L, MOBILE
BWB TL 6675-0026 : 3ED 1994	RANGING POLE, DEMOUNTABLE, IN CONTAINER
BWB TL 1730-0020 : 2ED 1999	CLEANING EQUIPMENT FOR AIRCRAFT OXYGEN SYSTEM
BWB TL 6695-0005 : 2ED 1999	SAMPLER SET FOR GASEOUS OXYGEN
BWB TL 8100-0103 : 5ED 2008	PACKAGING REUSABLE PACKAGES WITH CUSHIONING/RETAINING SYSTEMS
BWB TL 8910-0002 : 17ED 2007	PROCESSED CHEESE
BWB TL 8940-0005-001 : 9ED 2007	PROCESSED FOOD - GENERAL CONDITIONS
DIN ISO 11040-4 E : 2017	PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING (ISO 11040-4:2015)
DIN EN 16264:2014-11	PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - CARTRIDGES FOR POWDER ACTUATED TOOLS
DIN HDBK 225-1 : 4ED 2010	STATISTIK - ANNAHMESTICHPROBENPRUEFUNG ANHAND VON ALTERNATIVMERKMALEN
DIN EN ISO 28765:2016-10	Vitreous and porcelain enamels - Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges (ISO 28765:2016)
DIN EN 60603-1:1998-07	CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 1: GENERIC SPECIFICATION: GENERAL REQUIREMENTS AND GUIDE FOR THE PREPARATION OF DETAIL SPECIFICATIONS, WITH ASSESSED QUALITY
DIN 28450-1:1996-03	COUPLINGS FOR TANK TRUCKS, NOMINAL PRESSURE 10, NOMINAL SIZE 50, 80 AND 100 - PART 1: SURVEY, DESIGN, TESTING, MARKING
DIN EN 14399-9:2016-01 (Draft)	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES
BWB TL 6650-0026 : 2ED 1994	VISION BLOCK FOR ARMOURED ENGINEER TANK 2
DIN EN 2943:1998-11	AEROSPACE SERIES - INSERTS, SCREW THREAD, HELICAL COIL, SELF-LOCKING - TECHNICAL SPECIFICATION
DIN EN 3050:1998-07	AEROSPACE SERIES - O-RINGS, IN FLUOROCARBON RUBBER (FKM), LOW COMPRESSION SET - TECHNICAL SPECIFICATION
DIN EN 3004:1997-03	AEROSPACE SERIES - NUTS, SELF-LOCKING, MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286) - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C - TECHNICAL SPECIFICATION
DIN EN 12654-2:1998-12	Textile glass - Yarns - Part 2: Methods of test and general specifications; German version EN 12654-2:1998
DIN EN ISO 4074:2016-05	NATURAL RUBBER LATEX MALE CONDOMS - REQUIREMENTS AND TEST METHODS (ISO 4074:2015)
DIN EN 326-2:2014-10	Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control; German version EN 326-2:2010+A1:2014
DIN EN 14912:2015-05	LPG equipment and accessories - Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders
DIN EN 14471:2015-03	CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
DIN EN 14354:2005-03	WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS
DIN EN 12326-1:2014-11	SLATE AND STONE FOR DISCONTINUOUS ROOFING AND EXTERNAL CLADDING - PART 1: SPECIFICATIONS FOR SLATE AND CARBONATE SLATE
DIN EN ISO 4589-2:2016-03 (Draft)	PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 2: AMBIENT-TEMPERATURE TEST (ISO 4589-2:2017)
DIN EN 1457 : 2003 AMD 20 2007	CHIMNEYS - CLAY/CERAMIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
DIN EN 14035-25:2006-01	FIREWORKS - PART 25: PARTY POPPERS - SPECIFICATION AND TEST METHODS
DIN 983:2011-04	Retaining rings with lugs for shafts
DIN EN 14035-5:2006-05	FIREWORKS - PART 5: BATTERIES AND COMBINATIONS - SPECIFICATION AND TEST METHODS
DIN EN ISO 11833-2:2006-06	Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 2: Sheets of thickness less than 1 mm (ISO 11833-2:1998)
DIN EN ISO 11963:2013-03	PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS (ISO 11963:2012)
DIN EN 681-4:2006-11	Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 4: Cast polyurethane sealing elements
DIN EN 681-3:2006-11	Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 3: Cellular materials of vulcanized rubber
DIN 984:2013-04	Retaining rings with lugs (internal circlips) for use in bores
DIN EN 1457:1999-06	CHIMNEYS - CLAY/CERAMIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
DIN EN 681-2:2006-11	Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers
DIN EN 61243-2 : 2001 AMD 2 2003	LIVE WORKING - VOLTAGE DETECTORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES OF 1 KV TO 36 KV A.C.
VDI 4066 Blatt 4:2016-04	Hygiene requirements for the production and filling of dairy products without recontamination
DIN EN 137100 : 1998	SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC A.C. CAPACITORS WITH NON-SOLID ELECTROLYTE FOR MOTOR STARTER APPLICATIONS - QUALIFICATION APPROVAL
VDI 3405 Blatt 1:2013-10	Additive manufacturing processes, rapid manufacturing - Laser sintering of polymer parts - Quality control
VDI 4066 Blatt 1:2013-05	Hygienic requirements for the production and aseptically filling of beverage products - Principles and design criteria
DIN EN 137101 : 1998	BLANK DETAIL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC A.C. CAPACITORS WITH NON-SOLID ELECTROLYTE FOR MOTOR STARTER APPLICATIONS - QUALIFICATION APPROVAL
DIN EN 175200:1996-11	SECTIONAL SPECIFICATION - CIRCULAR CONNECTORS
DIN 7080:2005-05	Pressure resistant circular sight glasses of borosilicate glass without limitation in the range of low temperature
DIN EN 60603-2:2006-04	CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 2: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH ASSESSED QUALITY, FOR PRINTED BOARDS, FOR BASIC GRID OF 2.54 MM (0.1 IN) WITH COMMON MOUNTING FEATURES
DIN 6799:2017-06	RETAINING WASHERS FOR SHAFTS
BWB TL 3655-0010 : 9ED 2005	CARBONIC ACID TRANSFER SYSTEM
BWB TL 4510-0004 : 2ED 1997	WATER CATCH BASIN, 2.42 X 1.85 M
BWB TL 7360-0031 : 2ED 1998	FIELD KITCHEN TRAILER, ASSEMBLY
BWB TL 5120-0029 : 3ED 2000	MARLINESPIKE
BWB TL 5110-0001 : 5ED 1999	SAILOR'S KNIFE WITH MARLINESPIKE
BWB TL 6605-0001 : 3ED 2000	HAND LEAD, 3 KG, WITH ROPE, NAVY
DIN EN ISO 1797 E : 2017	DENTISTRY - SHANKS FOR ROTARY AND OSCILLATING INSTRUMENTS (ISO 1797:2017)
BWB TL 8470-0004 : 7ED 2004	COMBAT HELMET, GENERAL-PURPOSE
DIN EN 60938-1 : 2008	FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
BWB TL 8940-0009 : 1ED 2004	MEALS READY TO EAT (MRE) IN BAGS MADE OF FLEXIBLE ALUMINIUM COMPOSITE FOIL
BWB TL 6920-0033 : 4ED 1994
DIN EN 61284 : 1998	OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS
VDE 0560-811 : 1998	BLANK DETAIL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC A.C. CAPACITORS WITH NON-SOLID ELECTROLYTE FOR MOTOR STARTER APPLICATIONS - QUALIFICATION APPROVAL
BWB TL 4240-0058 : 5ED 2004	BAG FOR INDIVIDUAL NBC PROTECTIVE EQUIPMENT
VDE 0557-6 : 2001	LOW-VOLTAGE POWER SUPPLIES, DC OUTPUT - PART 6: REQUIREMENTS FOR LOW-VOLTAGE POWER SUPPLIES OF ASSESSED PERFORMANCE
BWB TL 8905-0001-001 : 12ED 2007	MEAT PRODUCTS - GENERAL CONDITIONS
BWB TL 7320-0064 : 2ED 1999	FIELD KITCHEN WORK TABLE WITH MOUNTING BRACKET FOR FOOD CONTAINER(S)
DIN EN 61854 : 1999	OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS
BWB TL 3655-0015 : 4ED 1999	TRANSPORT- AND STORAGE CONTAINER FOR LIQUID BREATHING OXYGEN, 200 L
DIN EN ISO 17668:2016-06	ZINC DIFFUSION COATINGS ON FERROUS PRODUCTS - SHERARDIZING - SPECIFICATION (ISO 17668:2016)
BWB TL 8470-0070 : 4ED 2009	BODY ARMOUR FOR SPECIAL FORCES, BLACK, MODIFIED
BWB TL 8455-0115 : 5ED 2000	PROFICIENCY BADGE, METAL, FOR MARKSMANSHIP LANYARD
DIN EN 61897 : 1999	OVERHEAD LINES - REQUIREMENTS AND TESTS FOR STOCKBRIDGE TYPE AEOLIAN VIBRATION DAMPERS
DIN EN ISO 1797-3:2013-06	DENTISTRY - SHANKS FOR ROTARY INSTRUMENTS - PART 3: SHANKS MADE OF CERAMICS (ISO 1797-3:2013)
DIN 17456:1999-02	SEAMLESS CIRCULAR STAINLESS STEEL TUBES WITH GENERAL QUALITY REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS
DIN 8902:1996-02	PRESSURE RESISTANT CIRCULAR SIGHT GLASSES OF SODA-LIME-GLASS WITHOUT LIMITATION IN THE RANGE OF LOW TEMPERATURE
DIN EN 144000:1995-09	GENERIC SPECIFICATION: DIRECTLY HEATED POSITIVE TEMPERATURE COEFFICIENT THERMISTORS TYPICALLY MADE FROM MODIFIED FERRO-ELECTRIC MATERIALS
DIN ISO 9152:2005-11	AEROSPACE - BOLTS, WITH MJ THREADS, IN TITANIUM ALLOYS, STRENGTH CLASS 1100 MPA - PROCUREMENT SPECIFICATION
DIN EN 13317:2007-02	TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - MANHOLE COVER ASSEMBLY
DIN EN 14116:2014-12	TANKS FOR TRANSPORT OF DANGEROUS GOODS - DIGITAL INTERFACE FOR PRODUCT RECOGNITION DEVICES FOR LIQUID FUELS
DIN EN 351-1 E : 2007	DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - PRESERVATIVE-TREATED SOLID WOOD - PART 1: CLASSIFICATION OF PRESERVATIVE PENETRATION AND RETENTION
DIN EN 14912 E : 2015	LPG EQUIPMENT AND ACCESSORIES - INSPECTION AND MAINTENANCE OF LPG CYLINDER VALVES AT TIME OF PERIODIC INSPECTION OF CYLINDERS
DIN EN 2583:1997-03	AEROSPACE SERIES - BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY, NI-PH 2601 (INCONEL 718) - CLASSIFICATION: 1275 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C - TECHNICAL SPECIFICATION
DIN EN ISO 4589-2 E : 2017	PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 2: AMBIENT-TEMPERATURE TEST (ISO 4589-2:2017)
DIN EN 13083:2013-08	TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - ADAPTOR FOR BOTTOM LOADING AND UNLOADING
DIN EN 295-2:2013-05	VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 2: EVALUATION OF CONFORMITY AND SAMPLING
DIN EN ISO 9163 E : 2005	TEXTILE GLASS - ROVINGS - MANUFACTURE OF TEST SPECIMENS AND DETERMINATION OF TENSILE STRENGTH OF IMPREGNATED ROVINGS
DIN EN 682:2006-10	Elastomeric seals - Material requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids
DIN EN 14471 E : 2015	CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
DIN EN ISO 21671 E : 2011	DENTISTRY - ROTARY POLISHERS (ISO 21671:2006 + AMD. 1:2011)
DIN EN 351-1:2007-10	Durability of wood and wood-based products - Preservative-treated solid wood - Part 1: Classification of preservative penetration and retention
BWB TL 3655-0020 : 3ED 1999	TRANSPORT- AND STORAGE CONTAINER FOR LIQUID NITROGEN, 200 L
BWB TL 4520-0009 : 3ED 2001	WATER HEATER, 60 L/MIN, 30 DEGREES C, MOBILE
BWB TL 4310-0035 : 5ED 2000	AIR COMPRESSOR, 0.75 M[3]/MIN, 10 BAR OVERPRESSURE ELECTRIC MOTOR, STATIONARY
BWB TL 7105-0049 : 6ED 2005
DIN 51004:1994-06	THERMAL ANALYSIS - DETERMINATION OF MELTING TEMPERATURES OF CRYSTALLINE MATERIALS BY DIFFERENTIAL THERMAL ANALYSIS
DIN EN 16497-1:2015-05	CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 1: NON-BALANCED FLUE APPLICATIONS
DIN EN 16475-2 E : 2017	CHIMNEYS - ACCESSORIES - PART 2: CHIMNEY FANS - REQUIREMENTS AND TEST METHODS
VDE 0682-412 : 2001 AMD 1 2003	LIVE WORKING - VOLTAGE DETECTORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES OF 1 KV TO 36 KV A.C.
DIN EN ISO 18295-1 E : 2017	CUSTOMER CONTACT CENTRES - PART 1: REQUIREMENTS FOR CUSTOMER CONTACT CENTRES (ISO 18295-1:2017)
BWB TL 5120-0028 : 3ED 2000
BWB TL 8455-0004 : 5ED 1999	COCKADE, METAL
BWB TL 6530-0098 : 1ED 2004
BWB TL 8100-0101 : 4ED 2005	PACKAGING MATERIAL PROTECTION BY MEANS OF PRESERVATION AND PACKAGING - PACKING LEVEL C - (NATO-4)
BWB TL 6230-0063 : 4ED 2007
BWB TL 8105-0026 : 5ED 2007	PLASTIC BAG, SLIDE FASTENER
VDE 0560-810 : 1998	SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC A.C. CAPACITORS WITH NON-SOLID ELECTROLYTE FOR MOTOR STARTER APPLICATIONS - QUALIFICATION APPROVAL
BWB TL 2530-0019 : 5ED 2000	IDLER WHEEL FOR TANK DESTROYERS JAGUAR 1 AND 2, IDLER WHEEL FOR IFV MARDER
BWB TL 7310-0013 : 2ED 2001	PETROLEUM DIESEL COOKER (SINGLE BURNER)
BWB TL 7105-0082 : 7ED 2005
BWB TL 8455-0007 : 8ED 2000	RANK INSIGNIA, METAL
BWB TL 4220-0043 : 5ED 1999	CONSTANT VOLUME DIVING SUIT, SUITS AND AUXILIARIES
BWB TL 6230-0091 : 1ED 2007
BWB TL 7110-0115 : 1ED 2005
VDE 0212-1 : 1998	OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS
BWB TL 6850-0039 : 2ED 2001	DECONTAMINATION AGENT A4/IHF
BWB TL 1376-0591 : 3ED 2006	BLACK POWDER - GENERAL CONDITIONS
BWB TL 8960-0004 : 1ED 2006
DIN EN 16261-2:2013-03	PYROTECHNIC ARTICLES - FIREWORKS, CATEGORY 4 - PART 2: REQUIREMENTS
BWB TL 7240-0030 : 2ED 2005	ADAPTERS FOR MILITARY FUEL CANS
BWB TL 7920-0025 : 2ED 1997	COTTON WASTE
BWB TL 7360-0026 : 3ED 2005	GREASE FLEECE FOR FIELD KITCHEN TRAILER (TFK 250)
DIN EN 16263-2:2015-11	PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - PART 2: REQUIREMENTS
DIN EN 14035-21:2006-01	FIREWORKS - PART 21: JUMPING GROUND SPINNERS - SPECIFICATION AND TEST METHODS
DIN EN 16497-1 E : 2015	CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 1: NON-BALANCED FLUE APPLICATIONS
DIN EN 16261-1:2013-02	PYROTECHNIC ARTICLES - FIREWORKS, CATEGORY 4 - PART 1: TERMINOLOGY
BWB TL 5110-0023 : 3ED 1994	POCKET KNIFE
BWB TL 4230-0010 : 3ED 2003	TRANSPORT BAG FOR CONTAMINATED CLOTHING AND PERSONAL EQUIPMENT
DIN EN 16257:2012-12	TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT - FOOTVALVE SIZES OTHER THAN 100 MM DIA (NOM)
DIN EN 1400:2014-07	CHILD USE AND CARE ARTICLES - SOOTHERS FOR BABIES AND YOUNG CHILDREN - SAFETY REQUIREMENTS AND TEST METHODS
DIN EN ISO 9187-1:2011-01	Injection equipment for medical use - Part 1: Ampoules for injectables (ISO 9187-1:2010)
DIN EN 10242:1995-03	THREADED PIPE FITTING IN MALLEABLE CAST IRON
DIN EN ISO 1461:2009-10	Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009)
DIN EN ISO 7823-3:2007-08	Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2007)
DIN EN 12326-1 E : 2014	SLATE AND STONE FOR DISCONTINUOUS ROOFING AND EXTERNAL CLADDING - PART 1: SPECIFICATIONS FOR SLATE AND CARBONATE SLATE
DIN EN 13953:2015-05	LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)
DIN EN ISO 11608-2 E : 2012	NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 2: NEEDLES (ISO 11608-2:2012)
DIN EN 14762 E : 2006	WOOD FLOORING - SAMPLING PROCEDURES FOR EVALUATION OF CONFORMITY
DIN EN 13799:2012-06	LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
DIN EN ISO 11608-2:2012-12	Needle-based injection systems for medical use - Requirements and test methods - Part 2: Needles (ISO 11608-2:2012)
DIN EN ISO 21671:2011-08	Dentistry - Rotary polishers (ISO 21671:2006 + Amd. 1:2011)
BWB TL 8140-0062 : 2ED 1994	REPAIR OF AMMUNITION CONTAINERS, FIBER MATERIAL, AND AMMUNITION CANS
VDE 0435-140 : 1999	ELECTROMECHANICAL NON-SPECIFIED TIME ALL-OR-NOTHING ELECTRICAL RELAYS - INSULATION COORDINATION
BWB TL 6510-0047 : 1ED 2006
VDE 0212-3 : 1999	OVERHEAD LINES - REQUIREMENTS AND TESTS FOR STOCKBRIDGE TYPE AEOLIAN VIBRATION DAMPERS
BWB TL 6230-0080 : 2ED 1997	TENT ILLUMINATION SET, 230 V, 50 HZ, WATERTIGHT
BWB TL 4220-0049 : 2ED 2003	RETTUNGSSCHWIMMWESTE SPEZIALKRAEFTE MIT SPLITTERSCHUTZ, RETTUNGSSCHWIMMWESTE SPEZIALKRAEFTE MIT SPLITTERSCHUTZ OHNE EINLAGE
BWB TL 1320-0041 : 1ED 2006
DIN EN 16497-2 E : 2017	CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 2: BALANCED FLUE APPLICATIONS
DIN 9926:2016-11	ROUND WIRE SNAP RINGS FOR BORES
DIN EN 61038 : 1994 AMD 2 1999	TIME SWITCHES FOR TARIFF AND LOAD CONTROL
BWB TL 6910-0008 : 4ED 2004	SIMULANT AGENT FOR AGENT SAMPLES
BWB TL 7320-0058 : 2ED 1998	FOLDING TABLE, CRNI STEEL, FOR FIELD KITCHENS
BWB TL 8415-0269 : 1ED 2000	HELMET, PROTOCOL DUTIES
BWB TL 1080-0027 : 1ED 2003
BWB TL 2530-0039 : 6ED 2008	REPAIR OF ROAD WHEEL FOR MTW M113 AND PZH M109
DIN EN 130300:1999-01	SECTIONAL SPECIFICATION: ALUMINIUM ELECTROLYTIC CAPACITORS WITH SOLID AND NON-SOLID ELECTROLYTE
BWB TL 3655-0028 : 2ED 1999	TRANSPORT- AND STORAGE CONTAINER FOR LIQUID NITROGEN, 60 L
DIN EN 14035-33:2006-01	FIREWORKS - PART 33: SPINNERS - SPECIFICATION AND TEST METHODS
BWB TL 8400-0007 : 8ED 2004	FOOTWEAR, HANDWEAR, BAGS AND OTHER ITEMS MADE OF LEATHER OR LEATHER SUBSTITUTES (GENERAL TERMS)
DIN EN ISO 1456:2009-12	Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium (ISO 1456:2009)
BWB TL 1080-0003 : 7ED 1999	SPREADER FOR CAMOUFLAGE NET
DIN EN 16497-2:2017-07	CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 2: BALANCED FLUE APPLICATIONS
BWB TL 6545-0051 : 5ED 2003	BAG FOR FIRST AID EQUIPMENT
DIN EN ISO 17668 E : 2016	ZINC DIFFUSION COATINGS ON FERROUS PRODUCTS - SHERARDIZING - SPECIFICATION (ISO 17668:2016)
BWB TL 4220-0052 : 1ED 2008	YOKE LIFE PRESERVER
BWB TL 4110-0124 : 1ED 2003	THERMOBEHAELTER, 43 LITER FUER TRSANDST (230 V/24 V) MIT AKTIVER KUEHLUNG
BWB TL 8470-0069 : 4ED 2009	ARMOR VEST, SPECIAL FORCES, 3 COLOR CAMOUFLAGE PRINT BUNDESWEHR
BWB TL 4220-0053 : 1ED 2008	NAVY LIFE PRESERVER, VEST, FOR LAND/SEA USE, MRS-LS
DIN EN 14035-20:2005-06	FIREWORKS - PART 20: JUMPING CRACKERS - SPECIFICATION AND TEST METHODS
DIN EN 61810-5 : 1999	ELECTROMECHANICAL NON-SPECIFIED TIME ALL-OR-NOTHING RELAYS - PART 5: INSULATION COORDINATION
DIN EN ISO 18295-1:2016-07 (Draft)	CUSTOMER CONTACT CENTRES - PART 1: REQUIREMENTS FOR CUSTOMER CONTACT CENTRES (ISO 18295-1:2017)
DIN ISO 11040-4:2007-10	PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING (ISO 11040-4:2015)
DIN EN 160200-1:1998-05	SECTIONAL SPECIFICATION - MICROWAVE MODULAR ELECTRONIC UNITS OF ASSESSED QUALITY - PART 1: CAPABILITY APPROVAL PROCEDURE
DIN EN 13175:2015-02	LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS
DIN EN 3380:1996-03	AEROSPACE SERIES - RINGS, RETAINING - TECHNICAL SPECIFICATION
DIN EN 326-2 E : 2000	WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL
DIN EN ISO 12947-4:2007-04	Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 4: Assessment of appearance change (ISO 12947-4:1998 + Cor. 1:2002) (includes Corrigendum AC:2006)
DIN EN 14354 E : 2017	WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS
DIN EN 15282:2007-06	VITREOUS AND PORCELAIN ENAMELS - DESIGN OF BOLTED STEEL TANKS FOR THE STORAGE OR TREATMENT OF WATER OR MUNICIPAL OR INDUSTRIAL EFFLUENTS AND SLUDGES
DIN EN 14762:2006-05	Wood flooring - Sampling procedures for evaluation of conformity
DIN EN 621:2010-04	NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS
DIN EN 326-2:2000-10	WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL
DIN EN ISO 15747:2012-07	PLASTIC CONTAINERS FOR INTRAVENOUS INJECTIONS (ISO 15747:2010)
DIN ISO 11040-4:2017-07	PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING (ISO 11040-4:2015)
DIN EN 13003-2:1999-06	PARA-ARAMID FIBRE FILAMENT YARNS - PART 2: METHODS OF TEST AND GENERAL SPECIFICATIONS
DIN EN ISO 6158:2011-10	METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED COATINGS OF CHROMIUM FOR ENGINEERING PURPOSES (ISO 6158:2011)
DIN EN 14354:2017-11	WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Add To Cart

Product Format

Quantity

Buy now

Add to cart

Create account