Skip to content
Please enter a keyword to search
  • Preview

    I.S. EN ISO 16090-1:2018

    Current The latest, up-to-date edition.

    MACHINE TOOLS SAFETY - MACHINING CENTRES, MILLING MACHINES, TRANSFER MACHINES - PART 1: SAFETY REQUIREMENTS (ISO 16090-1:2017)

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  09-10-2018

    Publisher:  National Standards Authority of Ireland

    For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
    Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

    Dates of withdrawal of national standards are available from NSAI.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    National foreword
    European foreword
    Foreword
    Introduction
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 List of significant hazards
    5 Safety requirements and/or protective/risk reduction
      measures
    6 Information for use
    Annex A (normative) - Impact test method for guards
            on machines
    Annex B (informative) - Equipment for impact test and
            examples of tested materials
    Annex C (informative) - Illustrative figures as examples
            of machines
    Annex D (informative) - Illustrative figures as examples
            of guards
    Annex E (informative) - Examples of the integration of
            exhaust and extinguishing systems when using
            combustible coolants or combustible dust
    Annex F (informative) - Provisions when using combustible
            coolants and combustible dust
    Annex G (normative) - Gravity-loaded axes
    Annex H (informative) - Examples: Concept for leaving/returning
            to a cabin (control station) at Group 3 and Group
            4 machines
    Annex I (informative) - Typical demand rates of safety
            functions for calculations according to Table 5
            and Annex J
    Annex J (normative) - Safety functions
    Annex K (normative) - Noise emission measurement
    Bibliography

    Abstract - (Show below) - (Hide below)

    Describes the technical safety requirements and protective measures for the design, construction and supply (including installation and dismantling, with arrangements for transport and maintenance) of stationary milling machines, including machines capable of performing boring operations, machining centers and transfer machines which are intended to cut cold metal, and other non-combustible cold materials except for wood or materials with physical characteristics similar to those of wood as defined in ISO 19085-1, and for glass, stone and engineered/agglomerated materials as defined in EN 14618.

    General Product Information - (Show below) - (Hide below)

    Committee TC 39
    Development Note Supersedes I.S. EN 12417, I.S. EN 13128 & I.S. EN 14070. (04/2018)
    Document Type Standard
    Publisher National Standards Authority of Ireland
    Status Current
    Superseded By

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 1005-4:2005+A1:2008 Safety of machinery - Human physical performance - Part 4: Evaluation of working postures and movements in relation to machinery
    ISO 13855:2010 Safety of machinery Positioning of safeguards with respect to the approach speeds of parts of the human body
    ISO 9241-400:2007 Ergonomics of humansystem interaction Part 400: Principles and requirements for physical input devices
    ISO 11202:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
    EN 1127-1:2011 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
    IEC 61000-6-4:2006+AMD1:2010 CSV ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
    ISO 4871:1996 Acoustics — Declaration and verification of noise emission values of machinery and equipment
    ISO 14119:2013 Safety of machinery Interlocking devices associated with guards Principles for design and selection
    ISO 14122-3:2016 Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails
    ISO 3744:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
    ISO 14122-1:2016 Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access
    ISO 11161:2007 Safety of machinery — Integrated manufacturing systems — Basic requirements
    IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION) ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST
    ISO 14120:2015 Safety of machinery Guards General requirements for the design and construction of fixed and movable guards
    IEC 61000-6-2:2016 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
    ISO 9614-1:1993 Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points
    ISO 16089:2015 Machine tools Safety Stationary grinding machines
    ISO 4413:2010 Hydraulic fluid power General rules and safety requirements for systems and their components
    EN 50370-2:2003 Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 2: Immunity
    EN 1837:1999+A1:2009 Safety of machinery - Integral lighting of machines
    ISO 9355-1:1999 Ergonomic requirements for the design of displays and control actuators — Part 1: Human interactions with displays and control actuators
    IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
    ISO 14738:2002 Safety of machinery — Anthropometric requirements for the design of workstations at machinery
    EN 1005-1:2001+A1:2008 Safety of machinery - Human physical performance - Part 1: Terms and definitions
    EN 1005-2:2003+A1:2008 Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery
    ISO 11925-2:2010 Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test
    ISO 9241-20:2008 Ergonomics of human-system interaction Part 20: Accessibility guidelines for information/communication technology (ICT) equipment and services
    IEC 60825-1:2014 Safety of laser products - Part 1: Equipment classification and requirements
    IEC 61000-4-4:2012 RLV Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
    ISO 14118:2000 Safety of machinery Prevention of unexpected start-up
    ISO 13851:2002 Safety of machinery Two-hand control devices Functional aspects and design principles
    ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction
    ISO 14122-4:2016 Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders
    ISO 1182:2010 Reaction to fire tests for products Non-combustibility test
    EN 14618:2009 Agglomerated stone - Terminology and classification
    EN 12445:2000 Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Test methods
    ISO 13856-2:2013 Safety of machinery — Pressure-sensitive protective devices — Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars
    IEC 61000-6-3:2006+AMD1:2010 CSV Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
    ISO 19085-1:2017 Woodworking machines Safety Part 1: Common requirements
    ISO 14159:2002 Safety of machinery — Hygiene requirements for the design of machinery
    ISO 3746:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane
    ISO 15641:2001 Milling cutters for high speed machining — Safety requirements
    IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
    IEC 61496-3:2008 Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR)
    ISO 16156:2004 Machine-tools safety — Safety requirements for the design and construction of work holding chucks
    IEC 61000-4-2:2008 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
    ISO 9355-3:2006 Ergonomic requirements for the design of displays and control actuators — Part 3: Control actuators
    ISO 13849-2:2012 Safety of machinery — Safety-related parts of control systems — Part 2: Validation
    ISO 13857:2008 Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
    IEC 61496-1:2012 Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests
    IEC 61000-6-4:2006+AMD1:2010 CSV Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
    ISO 13854:2017 Safety of machinery — Minimum gaps to avoid crushing of parts of the human body
    ISO 13856-1:2013 Safety of machinery — Pressure-sensitive protective devices — Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors
    ISO 4414:2010 Pneumatic fluid power General rules and safety requirements for systems and their components
    ISO 15534-1:2000 Ergonomic design for the safety of machinery — Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery
    ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
    IEC 62061:2005+AMD1:2012+AMD2:2015 CSV Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
    ISO 13856-3:2013 Safety of machinery — Pressure-sensitive protective devices — Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices
    ISO 14122-2:2016 Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways
    ISO 11228-1:2003 Ergonomics Manual handling Part 1: Lifting and carrying
    EN 50370-1 : 2005 Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 1: Emission
    IEC TS 62046:2008 Safety of machinery - Application of protective equipment to detect the presence of persons
    ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
    ISO 15534-2:2000 Ergonomic design for the safety of machinery — Part 2: Principles for determining the dimensions required for access openings
    IEC 61000-6-2 : 3.0:2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS
    ISO 6385:2016 Ergonomics principles in the design of work systems
    ISO 3448:1992 Industrial liquid lubricants — ISO viscosity classification
    ISO 11204:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
    ISO 9241-410:2008 Ergonomics of human-system interaction Part 410: Design criteria for physical input devices
    IEC 61800-5-2:2016 Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional
    ISO 9355-2:1999 Ergonomic requirements for the design of displays and control actuators — Part 2: Displays
    IEC 61496-2:2013 Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs)
    ISO 19353:2015 Safety of machinery Fire prevention and fire protection
    ISO 230-5:2000 Test code for machine tools Part 5: Determination of the noise emission
    ISO 23125:2015 Machine tools Safety Turning machines
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective