• IEC TS 60479-2:2007

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

    Effects of current on human beings and livestock - Part 2: Special aspects

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Superseded date:  31-12-2021

    Language(s):  English - French, Spanish, Castilian

    Published date:  23-05-2007

    Publisher:  International Electrotechnical Committee

    Add To Cart

    Abstract - (Show below) - (Hide below)

    IEC 60479-2, which is a technical specification, describes the effects on the human body when a sinusoidal alternating current in the frequency range above 100 Hz passes through it. The effects of current passing through the human body for
    - alternating sinusoidal current with d.c. components,
    - alternating sinusoidal current with phase control,
    - alternating sinusoidal current with multicycle control, are given but are only deemed applicable for alternating current frequencies from 15 Hz up to 100 Hz.
    This standard furthermore describes the effects of current passing through the human body in the form of single unidirectional rectangular impulses, sinusoidal impulses and impulses resulting from capacitor discharges. The values specified are deemed to be applicable for impulse durations from 0,1 ms up to and including 10 ms. For impulse durations greater than 10 ms, the values given in Figure 20 of IEC 60479-1 apply. This standard only considers conducted current resulting from the direct application of a source of current to the body, as does IEC 60479-1 and IEC 60479-3. It does not consider current induced within the body caused by its exposure to an external electromagnetic field. This third edition cancels and replaces the second edition, published in 1987, and constitutes a technical revision. The major changes with regard to the previous edition are as follows:
    - the report has been completed with additional information on effects of current passing through the human body for alternating sinusoidal current with d.c. components, alternating sinusoidal current with phase control, alternating sinusoidal current with multicycle control in the frequency range from 15 Hz up to 100 Hz.
    - an estimation of the equivalent current threshold for mixed frequencies.
    - the effect of repeated pulses (bursts) of current on the threshold of ventricular fibrillation.
    - effects of electric current through the immersed human body.

    General Product Information - (Show below) - (Hide below)

    Document Type Technical Specification
    Publisher International Electrotechnical Committee
    Status Superseded
    Superseded By

    Standards Referenced By This Book - (Show below) - (Hide below)

    15/30321532 DC : 0 BS EN 62368-3 ED. 1.0 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - SAFETY - PART 3: REMOTE POWER FEEDING
    DIN EN ISO 2746 E : 2016 VITREOUS AND PORCELAIN ENAMELS - HIGH VOLTAGE TEST (ISO 2746:2015)
    CEI EN 60950-21 : 2004 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 21: REMOTE POWER FEEDING
    12/30250727 DC BS EN ISO 13628-6 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 6: SUBSEA PRODUCTION CONTROL SYSTEMS
    BS EN 62423:2012 Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses
    CEI EN 62271-204 : 2012 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 204: RIGID GAS-INSULATED TRANSMISSION LINES FOR RATED VOLTAGES ABOVE 52 KV
    17/30345266 DC : 0 BS ISO 6469-3 - ELECTRICALLY PROPELLED ROAD VEHICLES - SAFETY SPECIFICATIONS - PART 3: ELECTRICAL SAFETY
    I.S. EN 61347-2-3:2011 LAMP CONTROL GEAR - PART 2-3: PARTICULAR REQUIREMENTS FOR A.C. AND/OR D.C. SUPPLIED ELECTRONIC CONTROL GEAR FOR FLUORESCENT LAMPS
    IEC TR 61340-5-2:2007 Electrostatics - Part 5-2: Protection of electronic devices from electrostatic phenomena - User guide
    IEC TR 61340-5-2:2018 RLV Electrostatics - Part 5-2: Protection of electronic devices from electrostatic phenomena - User guide
    S.R. HD 60364-5-51:2009 ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES
    IEC 60990 REDLINE : 3ED 2016 METHODS OF MEASUREMENT OF TOUCH CURRENT AND PROTECTIVE CONDUCTOR CURRENT
    IEC 61010-2-030:2017 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-030: Particular requirements for equipment having testing or measuring circuits
    CSA C22.2 No. 218.2 : 2015 HYDROMASSAGE BATHTUB APPLIANCES
    IEC 62128-3:2013 Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 3: Mutual interaction of a.c. and d.c. traction systems
    BS EN 60519-1:2015 Safety in installations for electroheating and electromagnetic processing General requirements
    15/30319022 DC : 0 BS EN 60990 ED 3.0 - METHODS OF MEASUREMENT OF TOUCH CURRENT AND PROTECTIVE CONDUCTOR CURRENT
    PD IEC/TR 62368-2:2015 Audio/video, information and communication technology equipment Explanatory information related to IEC 62368-1
    PD IEC/TS 63053:2017 General requirements for residual current operated protective devices for DC systems
    UNE-EN 61140:2017 Protection against electric shock - Common aspects for installation and equipment
    14/30287195 DC : 0 BS ISO 18246 - ELECTRICALLY PROPELLED MOPEDS AND MOTORCYCLES - SAFETY REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN EXTERNAL ELECTRIC POWER SUPPLY
    PD IEC/TS 62996:2017 Industrial electroheating and electromagnetic processing equipment. Requirements on touch currents, voltages and electric fields from 1 kHz to 6 MHz
    IEC 60990:2016 Methods of measurement of touch current and protective conductor current
    EN 61340-5-1:2016/AC:2017-05 ELECTROSTATICS - PART 5-1: PROTECTION OF ELECTRONIC DEVICES FROM ELECTROSTATIC PHENOMENA - GENERAL REQUIREMENTS (IEC 61340-5-1:2016/COR1:2017)
    HD 60364-5-51:2009/A12:2017 ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES
    EN 60519-1:2015 Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements
    EN 60990:2016 Methods of measurement of touch current and protective conductor current
    EN 50122-3:2010 Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 3: Mutual Interaction of a.c. and d.c. traction systems
    UNE-EN 62271-204:2012 High-voltage switchgear and controlgear - Part 204: Rigid gas-insulated transmission lines for rated voltage above 52 kV
    IEC TS 62997:2017 Industrial electroheating and electromagnetic processing equipment - Evaluation of hazards caused by magnetic nearfields from 1 Hz to 6 MHz
    UNE-EN 50122-3:2011 Railway applications - Fixed installations - Electrical safety, earthing and the return circuit -- Part 3: Mutual Interaction of a.c. and d.c. traction systems
    BS ISO 6469-3:2011 Electrically propelled road vehicles. Safety specifications Protection of persons against electric shock
    BS EN ISO 2746:2015 Vitreous and porcelain enamels. High voltage test
    NF EN 50604-1 : 2016 SECONDARY LITHIUM BATTERIES FOR LIGHT EV (ELECTRIC VEHICLE) APPLICATIONS - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS
    I.S. EN ISO 2746:2015 VITREOUS AND PORCELAIN ENAMELS - HIGH VOLTAGE TEST (ISO/FDIS 2746:2015)
    EN 50604-1:2016 Secondary lithium batteries for light EV (electric vehicle) applications - Part 1: General safety requirements and test methods
    I.S. EN 62423:2012 TYPE F AND TYPE B RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH AND WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (IEC 62423:2009 (MOD) + CORRIGENDUM DEC. 2011 (EQV))
    I.S. EN 50122-3:2010 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND THE RETURN CIRCUIT - PART 3: MUTUAL INTERACTION OF A.C. AND D.C. TRACTION SYSTEMS
    BS EN 61347-2-3:2011 Lamp control gear Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps
    CEI EN 61347-2-3 : 2012 LAMP CONTROLGEAR - PART 2-3: PARTICULAR REQUIREMENTS FOR A.C. AND/OR D.C. SUPPLIED ELECTRONIC CONTROL GEAR FOR FLUORESCENT LAMPS
    CAN/CSA-C22.2 NO. 61010-2-034:18 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-034: Particular requirements for measurement equipment for insulation resistance and test equipment for electric strength (Adopted IEC 61010-2-034:2017, first edition, 2017-01, with Canadian deviations) | Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire — Partie 2-034: Exigences particulières applicables aux appareils de mesure de la résistance d’isolement et aux appareils d’essai de rigidité diélectrique (norme IEC 61010-2-034:2017 adoptée, première édition, 2017-01, avec exigences propres au Canada)
    IEC 61340-5-1 REDLINE : 2ED 2016 ELECTROSTATICS - PART 5-1: PROTECTION OF ELECTRONIC DEVICES FROM ELECTROSTATIC PHENOMENA - GENERAL REQUIREMENTS
    I.S. EN 61340-5-1:2016 ELECTROSTATICS - PART 5-1: PROTECTION OF ELECTRONIC DEVICES FROM ELECTROSTATIC PHENOMENA - GENERAL REQUIREMENTS
    BS EN ISO 18246:2017 Electrically propelled mopeds and motorcycles. Safety requirements for conductive connection to an external electric power supply
    CEI EN 50122-3 : 2012 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND THE RETURN CIRCUIT - PART 3: MUTUAL INTERACTION OF A.C. AND D.C. TRACTION SYSTEMS
    CEI EN 50604-1 : 1ED 2017 SECONDARY LITHIUM BATTERIES FOR LIGHT EV (ELECTRIC VEHICLE) APPLICATIONS - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS
    I.S. EN ISO 18246:2017 ELECTRICALLY PROPELLED MOPEDS AND MOTORCYCLES - SAFETY REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN EXTERNAL ELECTRIC POWER SUPPLY (ISO 18246:2015)
    UNE-EN 61347-2-3:2012 Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps
    CEI EN 60990 : 2000 METHODS OF MEASUREMENT OF TOUCH CURRENT AND PROTECTIVE CONDUCTOR CURRENT
    I.S. EN 61140:2016 PROTECTION AGAINST ELECTRIC SHOCK - COMMON ASPECTS FOR INSTALLATION AND EQUIPMENT
    IEC TS 61201:2007 Use of conventional touch voltage limits - Application guide
    IEC 61010-2-030 REDLINE : 2ED 2017 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-030: PARTICULAR REQUIREMENTS FOR EQUIPMENT HAVING TESTING OR MEASURING CIRCUITS
    IEC 60974-1:2017 Arc welding equipment - Part 1: Welding power sources
    IEC 60755:2017 General safety requirements for residual current operated protective devices
    IEC 61010-2-034:2017 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-034: Particular requirements for measurement equipment for insulation resistance and test equipment for electric strength
    UNE-EN ISO 18246:2017 Electrically propelled mopeds and motorcycles - Safety requirements for conductive connection to an external electric power supply (ISO 18246:2015)
    IEC 61340-5-1:2016 RLV Electrostatics - Part 5-1: Protection of electronic devices from electrostatic phenomena - General requirements
    CSA CE CODE SAFETY PACKAGE : 2012 CE CODE SAFETY PACKAGE
    14/30267228 DC : 0 BS EN 61340-5-1 ED 2.0 - ELECTROSTATICS - PART 5-1: PROTECTION OF ELECTRONIC DEVICES FROM ELECTROSTATIC PHENOMENA - GENERAL REQUIREMENTS
    IEC TR 61340-5-2 REDLINE : 2ED 2018 ELECTROSTATICS - PART 5-2: PROTECTION OF ELECTRONIC DEVICES FROM ELECTROSTATIC PHENOMENA - USER GUIDE
    PD IEC/TS 62997:2017 Industrial electroheating and electromagnetic processing equipment. Evaluation of hazards caused by magnetic nearfields from 1 Hz to 6 MHz
    ISO 6469-3:2011 Electrically propelled road vehicles Safety specifications Part 3: Protection of persons against electric shock
    DIN EN ISO 2746:2016-02 VITREOUS AND PORCELAIN ENAMELS - HIGH VOLTAGE TEST (ISO 2746:2015)
    17/30364658 DC : 0 BS EN 61010-2-033 ED.2.0 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORYUSE - PART 2-033: PARTICULAR REQUIREMENTS FOR HAND-HELD MULTIMETERS AND OTHER METERS; FOR DOMESTIC AND PROFESSIONAL USE; CAPABLE OF MEASURING MAINS VOLTAGE
    BS EN 50604-1:2016 Secondary lithium batteries for light EV (electric vehicle) applications General safety requirements and test methods
    BS EN 61340-5-1:2016 Electrostatics Protection of electronic devices from electrostatic phenomena. General requirements
    I.S. HD 60364-5-51:2009 ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES (IEC 60364-5-51:2005 (MOD))
    IEEE 1246-2011 REDLINE IEEE Guide for Temporary Protective Grounding Systems Used in Substations
    I.S. EN 60519-1:2015 SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS
    IEC TR 60755:2008 General requirements for residual current operated protective devices
    IEC TR 63167:2018 Assessment of contact current related to human exposure to electric, magnetic and electromagnetic fields
    IEC 62368-3:2017 Audio/video, information and communication technology equipment - Part 3: Safety aspects for DC power transfer through communication cables and ports
    IEC 62423:2009 Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses
    IEC 60519-1:2015 Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements
    13/30277685 DC : 0 BS EN 60519-1 - SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS
    IEC TS 63053:2017 General requirements for residual current operated protective devices for DC system
    BS ISO 18246 : 2015 ELECTRICALLY PROPELLED MOPEDS AND MOTORCYCLES - SAFETY REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN EXTERNAL ELECTRIC POWER SUPPLY
    IEC 62271-204:2011 High-voltage switchgear and controlgear - Part 204: Rigid gas-insulated transmission lines for rated voltage above 52 kV
    BS EN 61140 : 2002 PROTECTION AGAINST ELECTRIC SHOCK - COMMON ASPECTS FOR INSTALLATION AND EQUIPMENT
    IEC 61340-5-1:2016 Electrostatics - Part 5-1: Protection of electronic devices from electrostatic phenomena - General requirements
    IEC TS 62996:2017 Industrial electroheating and electromagnetic processing equipment - Requirements on touch currents, voltages and electric fields from 1 kHz to 6 MHz
    ISO 2746:2015 Vitreous and porcelain enamels High voltage test
    IEC 61347-2-3:2011+AMD1:2016 CSV Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps
    UNE-HD 60364-5-51:2010 Electrical installations of buildings -- Part 5-51: Selection and erection of electrical equipment - Common rules
    ISO 18246:2015 Electrically propelled mopeds and motorcycles — Safety requirements for conductive connection to an external electric power supply
    IEC TR 62368-2:2015 Audio/video, information and communication technology equipment - Part 2: Explanatory information related to IEC 62368-1
    EN 62271-204:2011 High-voltage switchgear and controlgear - Part 204: Rigid gas-insulated transmission lines for rated voltage above 52 kV
    EN ISO 2746:2015 Vitreous and porcelain enamels - High voltage test (ISO 2746:2015)
    EN ISO 18246:2017 Electrically propelled mopeds and motorcycles - Safety requirements for conductive connection to an external electric power supply (ISO 18246:2015)
    PD IEC/TR 61340-5-2:2018 Electrostatics Protection of electronic devices from electrostatic phenomena. User guide
    12/30247717 DC : 0 IEC 62128-3 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND THE RETURN CIRCUIT - PART 3: MUTUAL INTERACTION OF AC AND DC TRACTION SYSTEMS
    EN 62423:2012 Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses
    I.S. EN 62271-204:2011 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 204: RIGID GAS-INSULATED TRANSMISSION LINES FOR RATED VOLTAGE ABOVE 52 KV (IEC 62271-204:2011 (EQV))
    09/30183034 DC : 0 BS ISO 6469-3 - ELECTRIC ROAD VEHICLES - SAFETY SPECIFICATIONS - PART 3: PROTECTION OF PERSONS AGAINST ELECTRIC HAZARDS
    BS EN 50122-3:2010 Railway applications. Fixed installations. Electrical safety, earthing and the return circuit Mutual Interaction of a.c. and d.c. traction systems
    CEI EN 62423 : 2013 TYPE F AND TYPE B RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH AND WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES
    BS EN 62271-204:2011 High-voltage switchgear and controlgear Rigid gas-insulated transmission lines for rated voltage above 52 kV
    I.S. EN 60990:2016 METHODS OF MEASUREMENT OF TOUCH CURRENT AND PROTECTIVE CONDUCTOR CURRENT
    BS EN 60990:2000 Methods of measurement of touch current and protective conductor current
    NF EN 60990 : 2016 METHODS OF MEASUREMENT OF TOUCH CURRENT AND PROTECTIVE CONDUCTOR CURRENT
    IEC 61140:2016 Protection against electric shock - Common aspects for installation and equipment
    EN 61140:2016 Protection against electric shock - Common aspects for installation and equipment
    IEC 60990:2016 RLV Methods of measurement of touch current and protective conductor current
    IEC 61010-2-030:2017 RLV Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-030: Particular requirements for equipment having testing or measuring circuits
    EN 61347-2-3:2011/A1:2017 LAMP CONTROL GEAR - PART 2-3: PARTICULAR REQUIREMENTS FOR A.C. AND/OR D.C. SUPPLIED ELECTRONIC CONTROL GEAR FOR FLUORESCENT LAMPS (IEC 61347-2-3:2011/A1:2016)
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective