Skip to content
Please enter a keyword to search

  • ISO 10350-1:2017

    Current The latest, up-to-date edition.

    Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  French, English

    Published date:  11-10-2017

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    The ISO 10350 series identifies specific test procedures for the acquisition and presentation of comparable data for certain basic properties of plastics. In general, each property is specified by a single experimental value, although in certain cases properties are represented by two values obtained under different test conditions. The properties included are those presented conventionally in manufacturers' data sheets. ISO 10350-1 applies predominantly to unreinforced and reinforced thermoplastic and thermosetting materials that may be injection- or compression-moulded or prepared as sheets of specified thickness. For the purposes of ISO 10350-1, long-fibre-reinforced plastics are considered to have fibre lengths greater than 7,5 mm prior to moulding.

    NOTE ISO 10350-2 deals specifically with long- or continuous-fibre-reinforced plastics.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes ISO/DIS 10350-1. (10/2017)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    BS EN ISO 16396-2:2017 Plastics. Polyamide (PA) moulding and extrusion materials Preparation of test specimens and determination of properties
    ISO 178:2010 Plastics Determination of flexural properties
    PREN ISO 7792-2 : DRAFT 2011 PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    I.S. EN ISO 7792-2:2012 PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 7792-2:2012)
    14/30304058 DC : 0 BS EN ISO 17855-2 - PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    BS ISO 17422:2002 Plastics. Environmental aspects. General guidelines for their inclusion in standards
    UNE-EN ISO 19069-2:2016 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19069-2:2016)
    15/30315534 DC : 0 BS EN ISO 16396-2 - PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    DIN EN 15860 E : 2012 PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS
    BS ISO 20753 : 2008 PLASTICS - TEST SPECIMENS
    UNE-EN ISO 17855-2:2016 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 17855-2:2016)
    DIN EN ISO 16396-2:2017-07 Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017)
    BS EN ISO 178 : 2010 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES
    I.S. EN ISO 7391-2:2006 PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    EN ISO 899-1:2017 Plastics - Determination of creep behaviour - Part 1: Tensile creep (ISO 899-1:2017)
    DIN EN ISO 20753 E : 2014 PLASTICS - TEST SPECIMENS (ISO 20753:2008)
    UNI EN 15860 : 2010 PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS
    ISO 28078-2:2009 Plastics Poly(phenylene sulfide) (PPS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
    I.S. EN ISO 899-1:2017 PLASTICS - DETERMINATION OF CREEP BEHAVIOUR - PART 1: TENSILE CREEP (ISO 899-1:2017)
    ASTM D 5592 : 1994 Standard Guide for Material Properties Needed in Engineering Design Using Plastics
    DIN EN ISO 20753:2014-07 PLASTICS - TEST SPECIMENS (ISO 20753:2008)
    DIN EN ISO 15103-2:2007-09 PLASTICS - POLY(PHENYLENE ETHER) (PPE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    DIN EN ISO 11403-1 E : 2003 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 1: MECHANICAL PROPERTIES (ISO 11403-1:2014)
    DIN EN ISO 75-2:2013-08 PLASTICS - DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD - PART 2: PLASTICS AND EBONITE (ISO 75-2:2013)
    DIN EN ISO 3673-2 E : 2012 PLASTICS - EPOXY RESINS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES OF CROSSLINKED EPOXY RESINS (ISO 3673-2:2012)
    DIN EN ISO 8257-2 E : 2006 PLASTICS - POLY(METHYL METHACRYLATE) (PMMA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    DIN EN ISO 11403-3 E : 2002 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 3: ENVIRONMENTAL INFLUENCES ON PROPERTIES (ISO 11403-3:2014)
    ISO 75-3:2004 Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
    ISO 15103-2:2007 Plastics Poly(phenylene ether) (PPE) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
    ISO 19069-2:2016 Plastics — Polypropylene (PP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
    BS EN ISO 11403-3:2014 Plastics. Acquisition and presentation of comparable multipoint data Environmental influences on properties
    BS EN ISO 7391-2:2006 Plastics. Polycarbonate (PC) moulding and extrusion materials Preparation of test specimens and determination of properties
    DIN EN ISO 1872-2:2000-12 PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    I.S. EN ISO 11403-2:2012 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 2: THERMAL AND PROCESSING PROPERTIES (ISO 11403-2:2012)
    DIN EN ISO 8257-2:2006-06 PLASTICS - POLY(METHYL METHACRYLATE) (PMMA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    DIN EN ISO 178:2013-09 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010 + AMD.1:2013)
    DIN EN ISO 3672-2:2002-07 PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    16/30310691 DC : 0 BS EN ISO 294-1 - PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS - PART 1: GENERAL PRINCIPLES, AND MOULDING OF MULTIPURPOSE AND BAR TEST SPECIMENS
    I.S. EN ISO 178:2010 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010)
    17/30349217 DC : 0 BS EN ISO 21970-2 - PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    BS ISO 27547-1:2010 Plastics. Preparation of test specimens of thermoplastic materials using mouldless technologies General principles, and laser sintering of test specimens
    UNE-EN ISO 9988-2:2015 Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 9988-2:2006)
    05/30132990 DC : DRAFT APR 2005 ISO 20753 - PLASTICS - TEST SPECIMENS
    05/30091855 DC : DRAFT MAR 2005 ISO 1874-2 - PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    ISO 18263-2:2015 Plastics Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging Part 2: Preparation of test specimens and determination of properties
    PREN ISO 11403-1 : DRAFT 2012 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 1: MECHANICAL PROPERTIES (ISO/DIS 11403-1:2012)
    12/30237823 DC : 0 BS EN ISO 75-2 - PLASTICS - DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD - PART 2: PLASTICS AND EBONITE
    DIN EN ISO 19069-2:2016-07 PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 19069-2:2016)
    ISO 20753:2008 Plastics Test specimens
    BS ISO 8257-2:1990 Plastics. Poly(methyl methacrylate) (PMMA) moulding and extrusion materials Preparation of test specimens and determination of properties
    EN ISO 11403-1:2014 Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties (ISO 11403-1:2014)
    DIN EN ISO 17855-2 E : 2016 PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 17855-2:2016)
    EN ISO 11403-3:2014 Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:2014)
    ONORM EN ISO 14910-2 : 2013 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013)
    ISO 20558-2:2018 Plastics — Poly(phenylene sulfide) (PPS) moulding and extrusion materials — Part 2: Preparation of test specimen and determination of properties
    PREN 15860 : DRAFT 2016 PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS
    DIN EN ISO 178 E : 2013 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010 + AMD.1:2013)
    ISO 20029-2:2017 Plastics Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Part 2: Preparation of test specimens and determination of properties
    ONORM EN ISO 7391-2 : 2006 PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    UNE-EN ISO 25137-2:2017 Plastics - Sulfone polymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 25137-2:2009)
    UNE-EN ISO 20028-2:2017 Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20028-2:2017)
    BS EN ISO 20753:2014 Plastics. Test specimens
    DIN EN ISO 1874-2:2013-03 PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 1874-2:2012)
    DIN EN ISO 8986-2 E : 2010 PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    DIN EN ISO 75-3:2004-09 Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics (ISO 75-3:2004)
    DIN EN ISO 295:2004-05 Plastics - Compression moulding of test specimens of thermosetting materials (ISO 295:2004)
    DIN EN ISO 14530-2:2000-08 Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14530-2:1999); German version EN ISO 14530-2:1999
    UNE-EN ISO 11403-1:2014 Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties (ISO 11403-1:2014)
    BS EN ISO 1874-2:2012 Plastics. Polyamide (PA) moulding and extrusion materials Preparation of test specimens and determination of properties
    BS EN ISO 14528-2:2000 Plastics. Melamine-formaldehyde powder moulding compounds (MF-PMCs) Preparation of test specimens and determination of properties
    BS EN ISO 1872-2:2007 Plastics. Polyethylene (PE) moulding and extrusion materials Preparation of test specimens and determination of properties
    DIN EN ISO 7391-2:2006-06 PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    I.S. EN ISO 11403-1:2014 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 1: MECHANICAL PROPERTIES (ISO 11403-1:2014)
    I.S. EN ISO 75-3:2004 PLASTICS - DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD - PART 3: HIGH-STRENGTH THERMOSETTING LAMINATES AND LONG-FIBRE-REINFORCED PLASTICS
    I.S. EN ISO 8257-2:2006 PLASTICS - POLY(METHYL METHACRYLATE) (PMMA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    I.S. EN ISO 294-1:2017 PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS - PART 1: GENERAL PRINCIPLES, AND MOULDING OF MULTIPURPOSE AND BAR TEST SPECIMENS (ISO 294-1:2017)
    I.S. EN ISO 15103-2:2007 PLASTICS - POLY(PHENYLENE ETHER) (PPE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    I.S. EN ISO 2898-2:2008 PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    I.S. EN ISO 8256:2004 PLASTICS - DETERMINATION OF TENSILE-IMPACT STRENGTH
    DIN EN ISO 1873-2:2000-12 PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    I.S. EN ISO 75-2:2013 PLASTICS - DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD - PART 2: PLASTICS AND EBONITE (ISO 75-2:2013)
    I.S. EN ISO 11403-3:2014 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 3: ENVIRONMENTAL INFLUENCES ON PROPERTIES (ISO 11403-3:2014)
    I.S. EN ISO 3673-2:2012 PLASTICS - EPOXY RESINS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES OF CROSSLINKED EPOXY RESINS (ISO 3673-2:2012)
    I.S. EN ISO 1874-2:2012 PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 1874-2:2012)
    DIN EN ISO 25137-2 E : 2017 PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 25137-2:2009)
    BS EN ISO 25137-2:2017 Plastics. Sulfone polymer moulding and extrusion materials Preparation of test specimens and determination of properties
    15/30327856 DC : 0 BS ISO 20558-2 - PLASTICS - POLY(PHENYLENE SULFIDE) (PPS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMEN AND DETERMINATION OF PROPERTIES
    14/30304062 DC : 0 BS EN ISO 19069-2 - PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    11/30236286 DC : 0 BS EN ISO 11963 - PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS
    17/30333280 DC : 0 BS ISO 17422 - PLASTICS - ENVIRONMENTAL ASPECTS - GENERAL GUIDELINES FOR THEIR INCLUSION IN STANDARDS
    08/30160325 DC : DRAFT MAR 2008 BS ISO 27547-1 - PLASTICS - PREPARATION OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS USING MOULDLESS TECHNOLOGIES - PART 1: GENERAL PRINCIPLES, AND LASER-SINTERING OF SPECIMENS
    14/30283167 DC : 0 BS ISO 18263-2 - PLASTICS - MIXTURES OF POLYPROPYLENE (PP) AND POLYETHYLENE (PE) RECYCLATE DERIVED FROM PP AND PE USED FOR FLEXIBLE AND RIGID CONSUMENR PACKAGING - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    BS EN ISO 17855-2:2016 Plastics. Polyethylene (PE) moulding and extrusion materials Preparation of test specimens and determination of properties
    BS EN 62631-3-2:2016 Dielectric and resistive properties of solid insulating materials Determination of resistive properties (DC Methods). Surface resistance and surface resistivity
    13/30240167 DC : 0 BS ISO 16365-2 - PLASTICS - THERMOPLASTIC POLYURETHANES FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    BS ISO 25137-2 : 2009 PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    BS ISO 18263-2:2015 Plastics. Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging Preparation of test specimens and determination of properties
    15/30328314 DC : 0 BS EN ISO 20557-2 - PLASTICS - POLY(PHENYLENE ETHER) (PPE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMEN AND DETERMINATION OF PROPERTIES
    DIN EN ISO 9988-2 E : 2015 PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 9988-2:2006)
    01/121538 DC : DRAFT APRIL 2001 BS EN ISO 899-1 PLASTICS - DETERMINATION OF CREEP BEHAVIOUR - PART 1: TENSILE CREEP
    BS ISO 3672-2 : 2000 AMD 13326 PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    16/30317348 DC : 0 BS EN 15860 - PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS
    08/30165044 DC : DRAFT FEB 2008 BS ISO 28078-2 - PLASTICS - POLY(PHENYLENE SULFIDE) (PPS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    02/120706 DC : DRAFT FEB 2002 BS EN ISO 8256 - PLASTICS - DETERMINATION OF TENSILE-IMPACT STRENGTH
    BS ISO 28078-2:2009 Plastics. Poly(phenylene sulfide) (PPS) moulding and extrusion materials Preparation of test specimens and determination of properties
    ONORM EN ISO 20753 : 2014 PLASTICS - TEST SPECIMENS (ISO 20753:2008)
    I.S. EN ISO 17855-2:2016 PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 17855-2:2016)
    UNI EN ISO 178 : 2013 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES
    I.S. EN ISO 25137-2:2017 PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 25137-2:2009)
    EN ISO 7391-2:2006 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7391-2:2006)
    EN ISO 20029-2:2018 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimen and determination of properties (ISO 20029-2:2017)
    ISO 17282:2004 Plastics — Guide to the acquisition and presentation of design data
    I.S. EN ISO 8986-2:2009 PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    UNI EN ISO 11403-1 : 2014 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 1: MECHANICAL PROPERTIES
    UNE-EN 15860:2011 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
    DIN EN ISO 3672-2 E : 2002 PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    DIN EN ISO 295 E : 2004 PLASTICS - COMPRESSION MOULDING TEST SPECIMENS OF THERMOSETTING MATERIALS
    DIN EN ISO 8256:2005-05 Plastics - Determination of tensile-impact strength (ISO 8256:2004); German version EN ISO 8256:2004
    DIN EN ISO 11403-3:2014-09 Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:2014)
    DIN EN ISO 11403-1:2014-09 Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties (ISO 11403-1:2014)
    UNE-EN ISO 294-1:2017 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens (ISO 294-1:2017)
    BS EN ISO 3673-2:2012 Plastics. Epoxy resins Preparation of test specimens and determination of properties of crosslinked epoxy resins
    BS EN ISO 8256:2004 Plastics. Determination of tensile-impact strength
    ISO 17855-2:2016 Plastics Polyethylene (PE) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
    UNE-EN ISO 11403-2:2012 Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties (ISO 11403-2:2012)
    BS EN ISO 11403-2:2012 Plastics. Acquisition and presentation of comparable multipoint data Thermal and processing properties
    ISO 2898-2:2008 Plastics Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
    DIN EN ISO 3673-2:2012-10 Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012)
    I.S. EN ISO 294-3:2003 PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS - SMALL PLATES
    UNE-EN ISO 1874-2:2013 Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1874-2:2012)
    EN ISO 294-3 : 2003 PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS - PART 3: SMALL PLATES
    EN ISO 9988-2:2015 Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 9988-2:2006)
    EN ISO 25137-2:2017 Plastics - Sulfone polymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 25137-2:2009)
    UNI EN ISO 1874-2 : 2013 PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    UNI EN ISO 3673-2 : 2012 PLASTICS - EPOXY RESINS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES OF CROSSLINKED EPOXY RESINS
    UNI EN ISO 11403-2 : 2012 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 2: THERMAL AND PROCESSING PROPERTIES
    UNI EN ISO 7792-2 : 2013 PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    UNI EN ISO 2898-2 : 2009 PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    UNI EN ISO 75-2 : 2013 PLASTICS - DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD - PART 2: PLASTICS AND EBONITE
    UNI EN ISO 14910-2 : 2013 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    UNI EN ISO 8986-2 : 2010 PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    BS EN ISO 20029-2:2018 Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Preparation of test specimens and determination of properties
    12/30255180 DC : 0 BS EN ISO 11403-1 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 1: MECHANICAL PROPERTIES
    BS ISO 16365-2:2014 Plastics. Thermoplastic polyurethanes for moulding and extrusion Preparation of test specimens and determination of properties
    I.S. EN ISO 1873-2:2007 PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    I.S. EN ISO 1872-2:2007 PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    11/30242905 DC : 0 BS EN ISO 3673-2 - PLASTICS - EPOXY RESINS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    11/30192003 DC : 0 BS EN ISO 7792-2 - PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    BS EN ISO 20028-2:2017 Plastics. Thermoplastic polyester (TP) moulding and extrusion materials Preparation of test specimens and determination of properties
    I.S. EN ISO 9988-2:2015 PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 9988-2:2006)
    BS ISO 9988-2 : 2006 PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    05/30128281 DC : DRAFT JAN 2005 ISO 9988-2 - PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    DIN EN ISO 19069-2 E : 2016 PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 19069-2:2016)
    DIN EN ISO 9988-2:2015-05 PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 9988-2:2006)
    DIN EN ISO 20028-2 E : 2017 PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20028-2:2017)
    DIN EN 15860:2016-07 (Draft) PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS
    I.S. EN ISO 14910-2:2013 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013, CORRECTED VERSION 2015-12-15)
    17/30354769 DC : 0 BS EN ISO 29988-2 - PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    03/118818 DC : DRAFT DEC 2003 BS EN ISO 7391-2 - PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    BS EN ISO 19069-2:2016 Plastics. Polypropylene (PP) moulding and extrusion materials Preparation of test specimens and determination of properties
    17/30335677 DC : 0 BS EN ISO 178 - PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES
    DIN EN ISO 16396-2 E : 2017 PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 16396-2:2017)
    15/30304408 DC : 0 BS EN ISO 20029-2 - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    UNI EN ISO 20753 : 2014 PLASTICS - TEST SPECIMENS
    UNE-EN ISO 16396-2:2017 Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017)
    I.S. EN ISO 20029-2:2018 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMEN AND DETERMINATION OF PROPERTIES (ISO 20029-2:2017)
    I.S. EN ISO 20753:2014 PLASTICS - TEST SPECIMENS (ISO 20753:2008)
    I.S. EN 15860:2010 PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS
    I.S. EN 62631-3-2:2016 DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 3-2: DETERMINATION OF RESISTIVE PROPERTIES (DC METHODS) - SURFACE RESISTANCE AND SURFACE RESISTIVITY
    ISO 14910-2:2013 Plastics Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Part 2: Preparation of test specimens and determination of properties
    DIN EN ISO 20028-2:2015-08 (Draft) PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20028-2:2017)
    PREN ISO 75-2 : DRAFT 2011 PLASTICS - DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD - PART 2: PLASTICS AND EBONITE (ISO/DIS 75-2:2011)
    ASTM D 5592 : 1994 : R2010 Standard Guide for Material Properties Needed in Engineering Design Using Plastics
    EN ISO 20753:2014 PLASTICS - TEST SPECIMENS (ISO 20753:2008)
    ISO 16365-2:2014 Plastics — Thermoplastic polyurethanes for moulding and extrusion — Part 2: Preparation of test specimens and determination of properties
    ISO 17422:2002 Plastics Environmental aspects General guidelines for their inclusion in standards
    ISO 899-1:2017 Plastics — Determination of creep behaviour — Part 1: Tensile creep
    UNI EN ISO 11403-3 : 2014 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 3: ENVIRONMENTAL INFLUENCES ON PROPERTIES
    DIN EN ISO 294-1:2017-09 PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS - PART 1: GENERAL PRINCIPLES, AND MOULDING OF MULTIPURPOSE AND BAR TEST SPECIMENS (ISO 294-1:2017)
    UNE-EN ISO 14910-2:2014 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties (ISO 14910-2:2013, Corrected version 2015-12-15)
    UNE-EN ISO 7792-2:2013 Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7792-2:2012)
    DIN EN ISO 14910-2 E : 2013 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013)
    BS EN ISO 14529-2:2000 Plastics. Melamine/phenolic powder moulding compounds (MP-PMCs) Preparation of test specimens and determination of properties
    ISO 1873-2:2007 Plastics Polypropylene (PP) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
    BS EN ISO 1873-2:2007 Plastics. Polypropylene (PP) moulding and extrusion materials Preparation of test specimens and determination of properties
    BS EN ISO 10724-2:2001 Plastics. Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) Small plates
    ISO 14528-2:1999 Plastics Melamine-formaldehyde powder moulding compounds (MF-PMCs) Part 2: Preparation of test specimens and determination of properties
    ISO 20028-2:2017 Plastics — Thermoplastic polyester (TP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
    BS EN ISO 3672-2:2001 Plastics. Unsaturated-polyester resins (UP-R) Preparation of test specimens and determination of properties
    BS EN ISO 75-2:2013 Plastics. Determination of temperature of deflection under load Plastics and ebonite
    ISO 1874-2:2012 Plastics Polyamide (PA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
    BS EN ISO 294-3:2003 Plastics. Injection moulding of test specimens of thermoplastic materials Small plates
    BS EN ISO 295:2004 Plastics. Compression moulding of test specimens of thermosetting materials
    ISO 14530-2:1999 Plastics Unsaturated-polyester powder moulding compounds (UP-PMCs) Part 2: Preparation of test specimens and determination of properties
    ISO 8257-2:2001 Plastics Poly(methyl methacrylate) (PMMA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
    ISO 14529-2:1999 Plastics Melamine/phenolic powder moulding compounds (MP-PMCs) Part 2: Preparation of test specimens and determination of properties
    ISO 3672-2:2000 Plastics — Unsaturated-polyester resins (UP-R) — Part 2: Preparation of test specimens and determination of properties
    BS EN ISO 75-3:2004 Plastics. Determination of temperature of deflection under load High-strength thermosetting laminates and long-fibre-reinforced plastics
    BS EN ISO 14527-2:2000 Preparation of test specimens and determination of properties
    ISO 7792-2:2012 Plastics Thermoplastic polyester (TP) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
    ISO 16396-2:2017 Plastics Polyamide (PA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
    BS EN ISO 8257-2:2006 Plastics. Poly(methyl methacrylate) (PMMA) moulding and extrusion materials Preparation of test specimens and determination of properties
    ISO 25137-2:2009 Plastics Sulfone polymer moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
    ISO 14526-2:1999 Plastics Phenolic powder moulding compounds (PF-PMCs) Part 2: Preparation of test specimens and determination of properties
    BS EN ISO 294-1:2017 Plastics. Injection moulding of test specimens of thermoplastic materials General principles, and moulding of multipurpose and bar test specimens
    ISO 8986-2:2009 Plastics Polybutene-1 (PB-1) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
    ISO 9988-2:2006 Plastics Polyoxymethylene (POM) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
    ISO 3673-2:2012 Plastics — Epoxy resins — Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins
    UNE-EN ISO 11403-3:2014 Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:2014)
    UNE-EN ISO 75-2:2013 Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013)
    BS EN ISO 11403-1:2014 Plastics. Acquisition and presentation of comparable multipoint data Mechanical properties
    BS EN ISO 14526-2:2000 Plastics. Phenolic powder moulding compounds (PF-PMCs) Preparation of test specimens and determination of properties
    EN ISO 8257-2:2006 Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 8257-2:2001)
    EN ISO 11403-2:2012 Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties (ISO 11403-2:2012)
    EN ISO 2898-2:2008 Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2898-2:2008)
    EN ISO 15252-2 : 1999 PLASTICS - EPOXY POWDER MOULDING COMPOUNDS (EP-PMCS) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    EN ISO 8986-2:2009 Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 8986-2:2009)
    EN ISO 19069-2:2016 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19069-2:2016)
    EN ISO 294-1:2017 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens (ISO 294-1:2017)
    EN ISO 1873-2:2007 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1873-2:2007)
    EN ISO 14529-2 : 1999 PLASTICS - MELAMINE/PHENOLIC POWDER MOULDING COMPOUNDS (MP-PMCS) - PART 2 - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    EN ISO 1874-2:2012 Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1874-2:2012)
    EN ISO 10724-1 : 2001 PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOSETTING POWDER MOULDING COMPOUNDS (PMCS) - PART 1: GENERAL PRINCIPLES AND MOULDING OF MULTIPURPOSE TEST SPECIMENS
    EN ISO 10724-2 : 2000 PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOSETTING POWDER MOULDING COMPOUNDS (PMCS) - PART 2: SMALL PLATES
    EN ISO 3672-2 : 2001 PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    EN ISO 16396-2:2017 Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017)
    EN ISO 14530-2 : 1999 PLASTICS - UNSATURATED-POLYESTER POWDER MOULDING COMPOUNDS (UP-PMCS) - PART 2 - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    EN ISO 14528-2 : 1999 PLASTICS - MELAMINE/PHENOLIC POWDER MOULDING COMPOUNDS (MP-PMCS) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    EN ISO 8256:2004 Plastics - Determination of tensile-impact strength (ISO 8256:2004)
    EN ISO 20028-2:2017 Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20028-2:2017)
    EN ISO 17855-2:2016 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 17855-2:2016)
    EN ISO 1872-2:2007 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1872-2:2007)
    EN ISO 3673-2:2012 Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012)
    EN ISO 14910-2:2013 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties (ISO 14910-2:2013, Corrected version 2015-12-15)
    EN ISO 75-3:2004/AC:2006 Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics (ISO 75-3:2004)
    EN ISO 15103-2:2007 Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 15103-2:2007)
    EN ISO 75-2:2013 Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013)
    EN ISO 295 : 2004 PLASTICS - COMPRESSION MOULDING OF TEST SPECIMENS OF THERMOSETTING MATERIALS
    EN ISO 7792-2:2012 Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7792-2:2012)
    EN ISO 14527-2 : 1999 PLASTICS - UREA-FORMALDEHYDE AND UREA/MELAMINE-FORMALDEHYDE POWDER MOULDING COMPOUNDS (UF- AND UF/MF-PMCS) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    DIN EN ISO 17855-2:2016-06 PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 17855-2:2016)
    I.S. EN ISO 19069-2:2016 PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 19069-2:2016)
    07/30152076 DC : 0 BS ISO 25137-2 - PLASTICS - SULFONE PLASTICS (SP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    BS EN 15860:2010 Plastics. Thermoplastic semi-finished products for machining. Requirements and test methods
    08/30170332 DC : DRAFT JAN 2008 BS EN ISO 8986-2 - PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    15/30304402 DC : 0 BS EN ISO 20028-2 - PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    BS EN ISO 9988-2:2015 Plastics. Polyoxymethylene (POM) moulding and extrusion materials Preparation of test specimens and determination of properties
    PREN ISO 11963 : DRAFT 2011 PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS
    I.S. EN ISO 20028-2:2017 PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20028-2:2017)
    I.S. EN ISO 16396-2:2017 PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 16396-2:2017)
    ISO 27547-1:2010 Plastics — Preparation of test specimens of thermoplastic materials using mouldless technologies — Part 1: General principles, and laser sintering of test specimens
    ISO 20557-2:2018 Plastics — Poly(phenylene ether) (PPE) moulding and extrusion materials — Part 2: Preparation of test specimen and determination of properties
    DIN EN ISO 25137-2:2016-08 (Draft) PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 25137-2:2009)
    EN ISO 178:2010/A1:2013 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013)
    UNE-EN ISO 20753:2015 Plastics - Test specimens (ISO 20753:2008)
    ISO 7391-2:2006 Plastics Polycarbonate (PC) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
    EN 15860:2010 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
    ASTM D 5592 : 1994 : R2002 : EDT 1 Standard Guide for Material Properties Needed in Engineering Design Using Plastics
    DIN EN ISO 11403-2 E : 2013 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 2: THERMAL AND PROCESSING PROPERTIES (ISO 11403-2:2012)
    DIN EN ISO 7792-2:2013-03 PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 7792-2:2012)
    BS EN ISO 8986-2:2009 Plastics. Polybutene-1 (PB-1) moulding and extrusion materials Preparation of test specimens and determination of properties
    BS EN ISO 15103-2:2007 Plastics. Poly(phenylene ether) (PPE) moulding and extrusion materials Preparation of test specimens and determination of properties
    BS EN ISO 14910-2:2013 Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Preparation of test specimens and determination of properties
    ISO 15252-2:1999 Plastics Epoxy powder moulding compounds (EP-PMCs) Part 2: Preparation of test specimens and determination of properties
    BS EN ISO 2898-2:2008 Plastics. Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials Preparation of test specimens and determination of properties (ISO 2898-2:2008)
    UNE-EN ISO 3673-2:2013 Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012)
    ISO 1872-2:2007 Plastics Polyethylene (PE) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
    ISO 14527-2:1999 Plastics Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) Part 2: Preparation of test specimens and determination of properties
    BS EN ISO 7792-2:2012 Plastics. Thermoplastic polyester (TP) moulding and extrusion materials Preparation of test specimens and determination of properties
    BS EN ISO 10724-1:2001 Plastics. Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) General principles and moulding of multipurpose test specimens
    BS EN ISO 14530-2:2000 Plastics. Unsaturated-polyester powder moulding compounds (UP-PMCs) Preparation of test specimens and determination of properties
    BS EN ISO 15252-2:2000 Plastics. Epoxy powder moulding compounds (EP-PMCs) Preparation of test specimens and determination of properties
    DIN EN ISO 2898-2:2009-03 PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    EN 62631-3-2:2016 Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC Methods) - Surface resistance and surface resistivity
    DIN EN ISO 14910-2:2013-06 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013)
    DIN EN ISO 11403-2:2013-01 Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties (ISO 11403-2:2012)
    DIN EN ISO 11403-3:2002-02 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 3: ENVIRONMENTAL INFLUENCES ON PROPERTIES (ISO 11403-3:2014)
    DIN EN ISO 8986-2:2010-04 PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    DIN EN ISO 11403-1:2003-09 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 1: MECHANICAL PROPERTIES (ISO 11403-1:2014)
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective