Skip to content
Please enter a keyword to search

  • ISO 10524-1:2006

    View superseded by
    Withdrawn A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
    View superseded by

    Pressure regulators for use with medical gases Part 1: Pressure regulators and pressure regulators with flow-metering devices

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Withdrawn date:  27-03-2019

    Language(s):  English, French, Russian

    Published date:  30-01-2006

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO 10524-1:2006 is applicable to the types of pressure regulators listed and is intended for the administration of the following medical gases in the treatment, management, diagnostic evaluation and care of patients:

    • oxygen;
    • nitrous oxide;
    • air for breathing;
    • helium;
    • carbon dioxide;
    • xenon;
    • mixtures of the gases listed above;
    • air for driving surgical tools;
    • nitrogen for driving surgical tools.

    These pressure regulators are intended to be fitted to cylinders with nominal filling pressures up to 25 000 kPa at 15 C and can be provided with devices which control and measure the flow of the medical gas delivered.

    The types of pressure regulators covered by ISO 10524-1:2006 are as follows:

    • pressure regulators intended to be connected to cylinders by the operator;
    • pressure regulators with integral flow-metering devices intended to be connected to cylinders by the operator;
    • pressure regulators that are an integral part of medical equipment (e.g. anaesthetic workstations, lung ventilators, resuscitators).

    General Product Information - (Show below) - (Hide below)

    Document Type Standard
    Publisher International Organization for Standardization
    Status Withdrawn
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    17/30337954 DC : 0 BS ISO 19211 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - FIRE-ACTIVATED OXYGEN SHUT-OFF DEVICES FOR USE DURING OXYGEN THERAPY
    ISO 5359:2014 Anaesthetic and respiratory equipment Low-pressure hose assemblies for use with medical gases
    DIN EN ISO 80601-2-69:2014-12 Medical electrical equipment - Part 2-69: Particular requirements for basic safety and essential performance of oxygen concentrator equipment (ISO 80601-2-69:2014)
    BS EN ISO 80601-2-69:2014 Medical electrical equipment Particular requirements for basic safety and essential performance of oxygen concentrator equipment
    13/30268585 DC : 0 BS EN ISO 10079-1 - MEDICAL SUCTION EQUIPMENT - PART 1: ELECTRICALLY POWERED SUCTION EQUIPMENT
    09/30203808 DC : 0 BS EN ISO 80601-2-12 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS
    ASTM G 74 : 2013 : REDLINE Standard Test Method for Ignition Sensitivity of Nonmetallic Materials and Components by Gaseous Fluid Impact
    CSA Z10651-5 : 2008 : R2013 LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 5: GAS-POWERED EMERGENCY RESUSCITATORS
    CAN/CSA-C22.2 NO. 80601-2-72:17 Medical electrical equipment — Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients (Adopted ISO 80601-2-72:2015, first edition, 2015-09-01, with Canadian deviations)
    CSA Z8185 : 2008(R2013) RESPIRATORY TRACT HUMIDIFIERS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR RESPIRATORY HUMIDIFICATION SYSTEMS
    CSA Z8185 : 2008 RESPIRATORY TRACT HUMIDIFIERS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR RESPIRATORY HUMIDIFICATION SYSTEMS
    04/30088362 DC : DRAFT NOV 2004 ISO 10651-5 - LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 5: GAS-POWERED EMERGENCY VENTILATORS
    CSA Z10651-5 : 2008 : INC : UPD 1 : 2011 LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 5: GAS-POWERED EMERGENCY RESUSCITATORS
    UNE-EN ISO 80601-2-69:2015 Medical electrical equipment - Part 2-69: Particular requirements for basic safety and essential performance of oxygen concentrator equipment (ISO 80601-2-69:2014)
    ISO 27427:2013 Anaesthetic and respiratory equipment — Nebulizing systems and components
    I.S. EN ISO 10524-4:2008 PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 4: LOWPRESSURE REGULATORS
    BS EN ISO 80601-2-12:2011 Medical electrical equipment Particular requirements for basic safety and essential performance of critical care ventilators
    BS EN ISO 80601-2-13:2012+A2:2019 Medical electrical equipment Particular requirements for basic safety and essential performance of an anaesthetic workstation
    BS EN 13718-1:2014 Medical vehicles and their equipment. Air ambulances Requirements for medical devices used in air ambulances
    EN 13718-2:2015 Medical vehicles and their equipment - Air ambulances - Part 2: Operational and technical requirements for air ambulances
    ISO 10524-4:2008 Pressure regulators for use with medical gases — Part 4: Low-pressure regulators
    BS EN ISO 15001:2011 Anaesthetic and respiratory equipment. Compatibility with oxygen
    DIN EN ISO 10524-2:2006-07 PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 2: MANIFOLD AND LINE PRESSURE REGULATORS
    EN ISO 15002:2008 Flow-metering devices for connection to terminal units of medical gas pipeline systems (ISO 15002:2008)
    EN ISO 80601-2-13:2012 Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation (ISO 80601-2-13:2011)
    EN 13544-1:2007+A1:2009 Respiratory therapy equipment - Part 1: Nebulizing systems and their components
    BS EN ISO 15002:2008 Flow-metering devices for connection to terminal units of medical gas pipeline systems
    CSA Z10524-2 : 2012 PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 2: MANIFOLD AND LINE PRESSURE REGULATORS
    BS EN ISO 80601-2-13:2012 Medical electrical equipment Particular requirements for basic safety and essential performance of an anaesthetic workstation
    BS ISO 10651-5:2006 Lung ventilators for medical use. Particular requirements for basic safety and essential performance Gas-powered emergency resuscitators
    DIN EN ISO 80601-2-72:2016-04 Medical electrical equipment - Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients (ISO 80601-2-72:2015)
    UNI EN ISO 80601-2-12 : 2011 MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS
    15/30280904 DC : 0 BS ISO 18190 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - GENERAL REQUIREMENTS FOR AIRWAYS AND RELATED EQUIPMENT
    DIN EN ISO 80601-2-69 E : 2014 MEDICAL ELECTRICAL EQUIPMENT - PART 2-69: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF OXYGEN CONCENTRATOR EQUIPMENT (ISO 80601-2-69:2014)
    CAN/CSA-Z15002:12 (R2017) Flow-metering devices for connection to terminal units of medical gas pipeline systems (Adopted ISO 15002:2008, second edition, 2008-07-01, with Canadian deviations)
    13/30276231 DC : 0 BS EN 13718-1 - MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES
    CSA Z1500:2012 FLOW-METERING DEVICES FOR CONNECTION TO TERMINAL UNITS OF MEDICAL GAS PIPELINE SYSTEMS
    I.S. EN ISO 80601-2-12:2011 MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS (ISO 80601-2-12:2011/COR 1:2011)
    CSA C22.2 No. 80601-2-12 : 2012 MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS
    ISO 9170-1:2017 Terminal units for medical gas pipeline systems — Part 1: Terminal units for use with compressed medical gases and vacuum
    UNE-EN ISO 21969:2010 High-pressure flexible connections for use with medical gas systems (ISO 21969:2009)
    UNE-EN ISO 80601-2-13:2013 Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation (ISO 80601-2-13:2011)
    ONORM EN 13718-1 : 2014 MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES
    I.S. EN ISO 15001:2011 ANAESTHETIC AND RESPIRATORY EQUIPMENT - COMPATIBILITY WITH OXYGEN (ISO 15001:2010)
    ONORM EN 1789 : 2014 MEDICAL VEHICLES AND THEIR EQUIPMENT - ROAD AMBULANCES
    I.S. EN ISO 8185:2009 RESPIRATORY TRACT HUMIDIFIERS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR RESPIRATORY HUMIDIFICATION SYSTEMS
    UNI EN 13718-1 : 2014 MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES
    DIN EN 1789:2014-12 MEDICAL VEHICLES AND THEIR EQUIPMENT - ROAD AMBULANCES
    I.S. EN ISO 21969:2009 HIGH-PRESSURE FLEXIBLE CONNECTIONS FOR USE WITH MEDICAL GAS SYSTEMS
    I.S. EN ISO 10079-3:2014 MEDICAL SUCTION EQUIPMENT - PART 3: SUCTION EQUIPMENT POWERED FROM A VACUUM OR POSITIVE PRESSURE GAS SOURCE (ISO 10079-3:2014)
    UNI EN ISO 15001 : 2012 ANAESTHETIC AND RESPIRATORY EQUIPMENT - COMPATIBILITY WITH OXYGEN
    ASTM G 175 : 2013 : REDLINE Standard Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Pressure Regulators Used for Medical and Emergency Applications
    BS EN ISO 80601-2-72:2015 Medical electrical equipment Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients
    15/30300279 DC : 0 BS ISO 80601-2-74 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-74: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY HUMIDIFYING EQUIPMENT
    ISO/TS 22595-1:2006 Dentistry Plant area equipment Part 1: Suction systems
    DIN EN ISO 80601-2-72 E : 2016 MEDICAL ELECTRICAL EQUIPMENT - PART 2-72: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HOME HEALTHCARE ENVIRONMENT VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS (ISO 80601-2-72:2015)
    AAMI ISO 10651-5 : 2006 LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 5: GAS-POWERED EMERGENCY RESUSCITATORS
    UNI EN ISO 80601-2-69 : 2014 MEDICAL ELECTRICAL EQUIPMENT - PART 2-69: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF OXYGEN CONCENTRATOR EQUIPMENT
    ISO 11195:2018 Gas mixers for medical use — Stand-alone gas mixers
    16/30346835 DC : 0 BS ISO 20789 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - PASSIVE HUMIDIFIERS
    CSA ISO 10079-3:14 (R2019) Medical suction equipment - Part 3: Suction equipment powered from a vacuum or positive pressure gas source (Adopted ISO 10079-3:2014, third edition, 2014-05-01)
    BS EN ISO 5359 : 2014 ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES
    CSA ISO 10079-3 : 2014 MEDICAL SUCTION EQUIPMENT - PART 3: SUCTION EQUIPMENT POWERED FROM A VACUUM OR POSITIVE PRESSURE GAS SOURCE
    BS EN ISO 10524-2:2006 Pressure regulators for use with medical gases Manifold and line pressure regulators
    ISO 15002:2008 Flow-metering devices for connection to terminal units of medical gas pipeline systems
    DIN EN 13544-1:2009-12 RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS
    DIN EN 13718-2:2015-05 MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS FOR AIR AMBULANCES
    DIN EN 13718-1:2014-12 MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES
    DIN EN ISO 10079-3:2014-09 Medical suction equipment - Part 3: Suction equipment powered from a vacuum or positive pressure gas source (ISO 10079-3:2014)
    DIN EN ISO 15001:2012-06 Anaesthetic and respiratory equipment - Compatibility with oxygen (ISO 15001:2010)
    UNE-EN 13718-2:2015 Medical vehicles and their equipment - Air ambulances - Part 2: Operational and technical requirements for air ambulances
    ISO 80601-2-69:2014 Medical electrical equipment Part 2-69: Particular requirements for basic safety and essential performance of oxygen concentrator equipment
    BS EN ISO 21969:2009 High-pressure flexible connections for use with medical gas systems
    I.S. EN 1789:2007 MEDICAL VEHICLES AND THEIR EQUIPMENT - ROAD AMBULANCES
    EN 1789:2007+A2:2014 Medical vehicles and their equipment - Road ambulances
    EN ISO 80601-2-69:2014 Medical electrical equipment - Part 2-69: Particular requirements for basic safety and essential performance of oxygen concentrator equipment (ISO 80601-2-69:2014)
    I.S. EN 13544-1:2007 RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS
    ONORM EN 13718-2 : 2015 MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS FOR AIR AMBULANCES
    CSA C22.2 No. 80601-2-12 : 2012(R2017) MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS
    EN ISO 8185:2009 Respiratory tract humidifiers for medical use - Particular requirements for respiratory humidification systems (ISO 8185:2007)
    ONORM EN 13544-3 : 2010 RESPIRATORY THERAPY EQUIPMENT - PART 3: AIR ENTRAINMENT DEVICES
    UNI EN ISO 10079-3 : 2014 MEDICAL SUCTION EQUIPMENT - PART 3: SUCTION EQUIPMENT POWERED FROM A VACUUM OR POSITIVE PRESSURE GAS SOURCE
    UNI EN ISO 21969 : 2010 HIGH-PRESSURE FLEXIBLE CONNECTIONS FOR USE WITH MEDICAL GAS SYSTEMS
    UNI EN 13544-1 : 2009 RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS
    UNI EN ISO 8185 : 2009 RESPIRATORY TRACT HUMIDIFIERS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR RESPIRATORY HUMIDIFICATION SYSTEMS
    CSA Z10524-2 : 2012 : R2017 PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 2: MANIFOLD AND LINE PRESSURE REGULATORS
    ISO 18190:2016 Anaesthetic and respiratory equipment — General requirements for airways and related equipment
    EN ISO 5359:2014/A1:2017 ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES (ISO 5359:2014/AMD 1:2017)
    13/30264413 DC : 0 BS EN ISO 80601-2-72 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-72: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HOME HEALTHCARE ENVIRONMENT VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS
    BS ISO 18190:2016 Anaesthetic and respiratory equipment. General requirements for airways and related equipment
    DIN EN ISO 15002:2008-11 FLOW-METERING DEVICES FOR CONNECTION TO TERMINAL UNITS OF MEDICAL GAS PIPELINE SYSTEMS
    CSA Z10651-5 : 2008 LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 5: GAS-POWERED EMERGENCY RESUSCITATORS
    12/30244415 DC : DRAFT APR 2012 BS ISO 27427 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - NEBULIZING SYSTEMS AND COMPONENTS
    NF EN ISO 80601-2-12 : 2011 MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS
    CSA Z15001 : 2012 ANAESTHETIC AND RESPIRATORY EQUIPMENT - COMPATIBILITY WITH OXYGEN
    CSA Z10651-5 : 2008 : R2018 Lung Ventilators for Medical Use - Particular Requirements for Basic Safety and Essential Performance - Part 5: Gas-Powered Emergency Resuscitators
    CAN/CSA-Z15001:12 (R2017) Anaesthetic and respiratory equipment - Compatibility with oxygen (Adopted ISO 15001:2010, second edition, 2010-06-01, with Canadian deviations)
    ISO 80601-2-67:2014 Medical electrical equipment Part 2-67: Particular requirements for basic safety and essential performance of oxygen-conserving equipment
    CSA C22.2 No. 80601-2-69 : 2016 MEDICAL ELECTRICAL EQUIPMENT - PART 2-69: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF OXYGEN CONCENTRATOR EQUIPMENT
    CAN/CSA-C22.2 NO. 80601-2-67:17 Medical electrical equipment — Part 2-67: Particular requirements for basic safety and essential performance of oxygen conserving equipment (Adopted ISO 80601-2-67:2014, first edition, 2014-06-01, with Canadian deviations)
    I.S. EN ISO 15002:2008 FLOW-METERING DEVICES FOR CONNECTION TO TERMINAL UNITS OF MEDICAL GAS PIPELINE SYSTEMS
    EN ISO 10524-2:2006 Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators (ISO 10524-2:2005)
    I.S. EN ISO 80601-2-72:2015 MEDICAL ELECTRICAL EQUIPMENT - PART 2-72: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HOME HEALTHCARE ENVIRONMENT VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS (ISO 80601-2-72:2015)
    ISO 10524-2:2018 Pressure regulators for use with medical gases — Part 2: Manifold and line pressure regulators
    ISO 10651-5:2006 Lung ventilators for medical use Particular requirements for basic safety and essential performance Part 5: Gas-powered emergency resuscitators
    EN ISO 80601-2-12:2011/AC:2011 MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS (ISO 80601-2-12:2011/COR 1:2011)
    ISO 80601-2-12:2011 Medical electrical equipment Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators
    BS EN ISO 8185:2007 Respiratory tract humidifiers for medical use. Particular requirements for respiratory humidification systems
    UNE-EN ISO 10079-3:2014 Medical suction equipment - Part 3: Suction equipment powered from a vacuum or positive pressure gas source (ISO 10079-3:2014)
    ISO 21969:2009 High-pressure flexible connections for use with medical gas systems
    BS EN 13544-1 : 2007 RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS
    BS EN ISO 10079-3:2014 Medical suction equipment Suction equipment powered from a vacuum or positive pressure gas source
    ISO 80601-2-72:2015 Medical electrical equipment — Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients
    EN 13718-1:2014 Medical vehicles and their equipment - Air ambulances - Part 1: Requirements for medical devices used in air ambulances
    BS EN 1789 : 2007 MEDICAL VEHICLES AND THEIR EQUIPMENT - ROAD AMBULANCES
    I.S. EN 13718-1:2014 MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES
    UNE-EN 1789:2007 Medical vehicles and their equipment - Road ambulances
    ISO 15001:2010 Anaesthetic and respiratory equipment Compatibility with oxygen
    BS EN 13718-2:2015 Medical vehicles and their equipment. Air ambulances Operational and technical requirements for air ambulances
    ISO 80601-2-13:2011 Medical electrical equipment Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation
    I.S. EN 13718-2:2015 MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS FOR AIR AMBULANCES
    ISO 10079-3:2014 Medical suction equipment Part 3: Suction equipment powered from a vacuum or positive pressure gas source
    UNI EN ISO 80601-2-13 : 2013 MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AN ANAESTHETIC WORKSTATION
    I.S. EN 13718-2:2015+A1:2020 MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS FOR AIR AMBULANCES
    EN ISO 80601-2-72:2015 Medical electrical equipment - Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients (ISO 80601-2-72:2015)
    EN ISO 10079-3:2014 Medical suction equipment - Part 3: Suction equipment powered from a vacuum or positive pressure gas source (ISO 10079-3:2014)
    EN ISO 10524-4:2008 Pressure regulators for use with medical gases - Part 4: Low-pressure regulators (ISO 10524-4:2008)
    EN ISO 15001:2011 Anaesthetic and respiratory equipment - Compatibility with oxygen (ISO 15001:2010)
    DIN EN ISO 10524-4:2008-09 PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 4: LOW-PRESSURE REGULATORS
    16/30314880 DC : 0 BS EN ISO 9170-1 - TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM
    CSA ISO 27427 : 2014 ANAESTHETIC AND RESPIRATORY EQUIPMENT - NEBULIZING SYSTEMS AND COMPONENTS
    I.S. EN ISO 5359:2014 ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES (ISO 5359:2014)
    UNI EN ISO 10524-4 : 2008 PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 4: LOW-PRESSURE REGULATORS
    BS ISO 27427:2013 Anaesthetic and respiratory equipment. Nebulizing systems and components
    BS EN ISO 10524-4:2008 Pressure regulators for use with medical gases Low-pressure regulators
    BIS IS/ISO 10524-4 : 2008 PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 4: LOW-PRESSURE REGULATORS
    CSA Z10524-4 : 2012 PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 4: LOW-PRESSURE REGULATORS
    CAN/CSA-Z10524-4:12 (R2017) Pressure regulators for use with medical gases - Part 4: Low-pressure regulators (Adopted ISO 10524-4:2008, first edition, 2008-06-01, with Canadian deviations)
    CSA Z5359 : 2016 ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES, MEDICAL VACUUM, MEDICAL SUPPORT GASES, AND ANAESTHETIC GAS SCAVENGING SYSTEMS
    I.S. EN ISO 80601-2-69:2014 MEDICAL ELECTRICAL EQUIPMENT - PART 2-69: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF OXYGEN CONCENTRATOR EQUIPMENT (ISO 80601-2-69:2014)
    I.S. EN ISO 80601-2-13:2012 MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AN ANAESTHETIC WORKSTATION (ISO 80601-2-13:2011)
    DIN EN ISO 5359:2015-02 ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES (ISO 5359:2014)
    UNI EN ISO 15002 : 2008 FLOW-METERING DEVICES FOR CONNECTION TO TERMINAL UNITS OF MEDICAL GAS PIPELINE SYSTEMS
    I.S. EN ISO 10524-2:2006 PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 2: MANIFOLD AND LINE PRESSURE REGULATORS
    ISO 8185:2007 Respiratory tract humidifiers for medical use Particular requirements for respiratory humidification systems
    UNE-EN ISO 15001:2012 Anaesthetic and respiratory equipment - Compatibility with oxygen (ISO 15001:2010)
    DIN EN ISO 8185:2009-07 RESPIRATORY TRACT HUMIDIFIERS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR RESPIRATORY HUMIDIFICATION SYSTEMS
    EN ISO 21969:2009 High-pressure flexible connections for use with medical gas systems (ISO 21969:2009)
    UNI EN 1789 : 2014 MEDICAL VEHICLES AND THEIR EQUIPMENT - ROAD AMBULANCES
    DIN EN ISO 10079-3:2000-03 MEDICAL SUCTION EQUIPMENT - PART 3: SUCTION EQUIPMENT POWERED FROM A VACUUM OR POSITIVE PRESSURE GAS SOURCE (ISO 10079-3:2014)
    UNE-EN 13544-1:2007 Respiratory therapy equipment - Part 1: Nebulizing systems and their components
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective