05/30136954 DC : 0
|
EN 15309 - CHARACTERIZATION OF WASTE AND SOIL - DETERMINATION OF ELEMENTAL COMPOSITION BY X-RAY FLUORESCENCE |
ISO 6474-1:2010
|
Implants for surgery Ceramic materials Part 1: Ceramic materials based on high purity alumina |
BS EN 15309:2007
|
Characterization of waste and soil. Determination of elemental composition by X-ray fluorescence |
I.S. EN ISO 10081-2:2005
|
CLASSIFICATION OF DENSE SHAPED REFRACTORY PRODUCTS - PART 2: BASIC PRODUCTS CONTAINING LESS THAN 7% RESIDUAL CARBON |
14/30276373 DC : 0
|
BS EN ISO 13356 - IMPLANTS FOR SURGERY - CERAMIC MATERIALS BASED ON YTTRIASTABILIZED TETRAGONAL ZIRCONIA (Y-TZP) |
I.S. EN ISO 14719:2011
|
CHEMICAL ANALYSIS OF REFRACTORY MATERIAL GLASS AND GLAZES - DETERMINATION OF FE[2+] AND FE[3+] BY THE SPECTRAL PHOTOMETRIC METHOD WITH 1,10-PHENANTHROLINE (ISO 14719:2011) |
BS ISO 10081-3 : 2003 AMD 15909
|
CLASSIFICATION OF DENSE SHAPED REFRACTORY PRODUCTS - PART 3: BASIC PRODUCTS CONTAINING FROM 7 % TO 50 % RESIDUAL CARBON |
13/30272291 DC : 0
|
BS ISO 18227 - SOIL QUALITY - DETERMINATION OF ELEMENTAL COMPOSITION BY X-RAY FLUORESCENCE |
BS ISO 10081-4:2007
|
Classification of dense shaped refractory products Special products |
UNI EN ISO 1927-3 : 2013
|
MONOLITHIC (UNSHAPED) REFRACTORY PRODUCTS - PART 3: CHARACTERIZATION AS RECEIVED |
DIN EN ISO 20565-3:2009-06
|
CHEMICAL ANALYSIS OF CHROME-BEARING REFRACTORY PRODUCTS AND CHROME-BEARING RAW MATERIALS (ALTERNATIVE TO THE X-RAY FLUORESCENCE METHOD) - PART 3: FLAME ATOMIC ABSORPTION SPECTROMETRY (FAAS) AND INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRY (ICP-AES) |
BS EN ISO 21079-3:2008
|
Chemical analysis of refractories containing alumina, zirconia, and silica. Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma emission spectrometry (ICP-AES) |
BS EN ISO 20565-1:2008
|
Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) Apparatus, reagents, dissolution and determination of gravimetric silica |
I.S. EN ISO 21079-3:2008
|
CHEMICAL ANALYSIS OF REFRACTORIES CONTAINING ALUMINA, ZIRCONIA, AND SILICA - REFRACTORIES CONTAINING 5 PERCENT TO 45 PERCENT OF ZRO[2] (ALTERNATIVE TO THE X-RAY FLUORESCENCE METHOD) - PART 3: FLAME ATOMIC ABSORPTION SPECTROPHOTOMETRY (FAAS) AND INDUCTIVELY COUPLED PLASMA EMISSION SPECTROMETRY (ICP-AES) |
BS ISO 18227:2014
|
Soil quality. Determination of elemental composition by X-ray fluorescence |
06/30159543 DC : 0
|
BS EN ISO 21068-1 - CHEMICAL ANALYSIS OF SILICON CARBIDE CONTAINING RAW MATERIALS AND REFRACTORY PRODUCTS - PART 1: GENERAL INFORMATION AND SAMPLE PREPARATION |
I.S. EN ISO 10081-4:2014
|
CLASSIFICATION OF DENSE SHAPED REFRACTORY PRODUCTS - PART 4: SPECIAL PRODUCTS (ISO 10081-4:2014) |
I.S. EN ISO 21079-2:2008
|
CHEMICAL ANALYSIS OF REFRACTORIES CONTAINING ALUMINA, ZIRCONIA, AND SILICA - REFRACTORIES CONTAINING 5 PERCENT TO 45 PERCENT OF ZRO[2] (ALTERNATIVE TO THE X-RAY FLUORESCENCE METHOD) - PART 2: WET CHEMICAL ANALYSIS |
UNI EN ISO 21079-2 : 2008
|
CHEMICAL ANALYSIS OF REFRACTORIES CONTAINING ALUMINA, ZIRCONIA, AND SILICA - REFRACTORIES CONTAINING 5% TO 45% OF ZRO[2] (ALTERNATIVE TO THE X-RAY FLUORESCENCE METHOD) - PART 2: WET CHEMICAL ANALYSIS |
I.S. EN ISO 21079-1:2008
|
CHEMICAL ANALYSIS OF REFRACTORIES CONTAINING ALUMINA, ZIRCONIA AND SILICA - REFRACTORIES CONTAINING 5 PERCENT TO 45 PERCENT OF ZRO[2] (ALTERNATIVE TO THE X-RAY FLUORESCENCE METHOD) - PART 1: APPARATUS, REAGENTS AND DISSOLUTION |
DIN EN 12698-1 E : 2007
|
CHEMICAL ANALYSIS OF NITRIDE BONDED SILICON CARBIDE REFRACTORIES - PART 1: CHEMICAL METHODS |
BS EN 725-4:2006
|
Advanced technical ceramics. Methods of test for ceramic powders Determination of oxygen content in aluminium nitride by XRF analysis |
ISO 21079-1:2008
|
Chemical analysis of refractories containing alumina, zirconia and silica — Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) — Part 1: Apparatus, reagents and dissolution |
EN ISO 10081-2:2005
|
Classification of dense shaped refractory products - Part 2: Basic products containing less than 7 % residual carbon (ISO 10081-2:2003) |
EN 12698-2:2007
|
Chemical analysis of nitride bonded silicon carbide refractories - Part 2: XRD methods |
DIN EN 12698-1:2007-06
|
Chemical analysis of nitride bonded silicon carbide refractories - Part 1: Chemical methods |
EN 12698-1:2007
|
Chemical analysis of nitride bonded silicon carbide refractories - Part 1: Chemical methods |
DIN EN 12698-2:2007-06
|
Chemical analysis of nitride bonded silicon carbide refractories - Part 2: XRD methods |
EN ISO 10081-3:2005
|
Classification of dense shaped refractory products - Part 3: Basic products containing from 7% to 50% residual carbon (ISO 10081-3:2003) |
DIN EN ISO 13356:2016-02
|
IMPLANTS FOR SURGERY - CERAMIC MATERIALS BASED ON YTTRIA-STABILIZED TETRAGONAL ZIRCONIA (Y-TZP) (ISO 13356:2015) |
DIN EN ISO 20565-3 E : 2009
|
CHEMICAL ANALYSIS OF CHROME-BEARING REFRACTORY PRODUCTS AND CHROME-BEARING RAW MATERIALS (ALTERNATIVE TO THE X-RAY FLUORESCENCE METHOD) - PART 3: FLAME ATOMIC ABSORPTION SPECTROMETRY (FAAS) AND INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRY (ICP-AES) |
I.S. EN 725-4:2006
|
ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC POWDERS - PART 4: DETERMINATION OF OXYGEN CONTENT IN ALUMINIUM NITRIDE BY XRF ANALYSIS |
DIN EN ISO 21068-1:2008-12
|
CHEMICAL ANALYSIS OF SILICON-CARBIDE-CONTAINING RAW MATERIALS AND REFRACTORY PRODUCTS - PART 1: GENERAL INFORMATION AND SAMPLE PREPARATION |
I.S. EN ISO 10081-3:2005
|
CLASSIFICATION OF DENSE SHAPED REFRACTORY PRODUCTS - PART 3: BASIC PRODUCTS CONTAINING FROM 7% TO 50% RESIDUAL CARBON |
BS EN ISO 1927-3:2012
|
Monolithic (unshaped) refractory products Characterization as received |
BS ISO 6474-1:2010
|
Implants for surgery. Ceramic materials Ceramic materials based on high purity alumina |
UNI EN ISO 21068-1 : 2008
|
CHEMICAL ANALYSIS OF SILICON-CARBIDE CONTAINING RAW MATERIALS AND REFRACTORY PRODUCTS - PART 1: GENERAL INFORMATION AND SAMPLE PREPARATION |
DIN EN 15309 E : 2007
|
CHARACTERIZATION OF WASTE AND SOIL - DETERMINATION OF ELEMENTAL COMPOSITION BY X-RAY FLUORESCENCE |
DIN EN ISO 21068-3:2008-12
|
CHEMICAL ANALYSIS OF SILICON-CARBIDE-CONTAINING RAW MATERIALS AND REFRACTORY PRODUCTS - PART 3: DETERMINATION OF NITROGEN, OXYGEN AND METALLIC AND OXIDIC CONSTITUENTS |
I.S. EN ISO 13356:2015
|
IMPLANTS FOR SURGERY - CERAMIC MATERIALS BASED ON YTTRIA-STABILIZED TETRAGONAL ZIRCONIA (Y-TZP) (ISO 13356:2015) |
DIN EN 725-4:2006-07
|
Advanced technical ceramics - Methods of test for ceramic powders - Part 4: Determination of oxygen content in aluminium nitride by XRF analysis |
DIN EN 12698-2 E : 2007
|
CHEMICAL ANALYSIS OF NITRIDE BONDED SILICON CARBIDE REFRACTORIES - PART 2: XRD METHODS |
BS EN 12698-1:2007
|
Chemical analysis of nitride bonded silicon carbide refractories Chemical methods |
BS EN 12698-2:2007
|
Chemical analysis of nitride bonded silicon carbide refractories XRD methods |
ISO 10081-4:2014
|
Classification of dense shaped refractory products Part 4: Special products |
ISO 21079-2:2008
|
Chemical analysis of refractories containing alumina, zirconia, and silica — Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) — Part 2: Wet chemical analysis |
06/30159551 DC : 0
|
BS EN ISO 21068-3 - CHEMICAL ANALYSIS OF SILICON CARBIDE CONTAINING RAW MATERIALS AND REFRACTORY PRODUCTS - PART 3; DETERMINATION OF NITROGEN, OXYGEN AND METALLIC AND OXIDIC CONSTITUENTS |
BS EN ISO 21068-3:2008
|
Chemical analysis of silicon-carbide-containing raw materials and refractory products Determination of nitrogen, oxygen and metallic and oxidic constituents |
16/30332223 DC : 0
|
BS ISO 6474-1 - IMPLANTS FOR SURGERY - CERAMIC MATERIALS - PART 1: CERAMIC MATERIALS BASED ON HIGH PURITY ALUMINA |
17/30361518 DC : 0
|
BS ISO 6474-2 - IMPLANTS FOR SURGERY - CERAMIC MATERIALS - PART 2: COMPOSITE MATERIALS BASED ON A HIGH-PURITY ALUMINA MATRIX WITH ZIRCONIA REINFORCEMENT |
07/30163478 DC : 0
|
BS EN ISO 21079-2 - CHEMICAL ANALYSIS OF REFRACTORIES CONTAINING ALUMINA, ZIRCONIA, AND SILICA - REFRACTORIES CONTAINING 5% TO 45% OF ZRO[2] (ALTERNATIVE TO THE X-RAY FLUORESCENCE METHOD) - PART 2: WET CHEMICAL ANALYSIS |
BS EN ISO 13356:2015
|
Implants for surgery. Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP) |
BS EN ISO 14719:2011
|
Chemical analysis of refractory material glass and glazes. Determination of Fe2+ and Fe3+ by the spectral photometric method with 1,10-phenanthroline |
UNI EN ISO 21079-1 : 2008
|
CHEMICAL ANALYSIS OF REFRACTORIES CONTAINING ALUMINA, ZIRCONIA AND SILICA - REFRACTORIES CONTAINING 5% TO 45% OF ZRO[2] (ALTERNATIVE TO THE X-RAY FLUORESCENCE METHOD) - PART 1: APPARATUS, REAGENTS AND DISSOLUTION |
BS EN ISO 10081-4:2014
|
Classification of dense shaped refractory products Special products |
DIN EN ISO 13356 E : 2016
|
IMPLANTS FOR SURGERY - CERAMIC MATERIALS BASED ON YTTRIASTABILIZED TETRAGONAL ZIRCONIA (YTZP) (ISO 13356:2015) |
UNI EN ISO 21068-3 : 2008
|
CHEMICAL ANALYSIS OF SILICON-CARBIDE CONTAINING RAW MATERIALS AND REFRACTORY PRODUCTS - PART 3: DETERMINATION OF NITROGEN, OXYGEN AND METALLIC AND OXIDIC CONSTITUENTS |
BS ISO 10081-2 : 2003 AMD 15914
|
CLASSIFICATION OF DENSE SHAPED REFRACTORY PRODUCTS - PART 2: BASIC PRODUCTS CONTAINING LESS THAN 7 % RESIDUAL CARBON |
DIN EN ISO 1927-3:2013-03
|
MONOLITHIC (UNSHAPED) REFRACTORY MATERIALS - PART 3: CHARACTERIZATION AS RECEIVED (ISO 1927-3:2012) |
DIN EN ISO 20565-1:2009-06
|
CHEMICAL ANALYSIS OF CHROME-BEARING REFRACTORY PRODUCTS AND CHROME-BEARING RAW MATERIALS (ALTERNATIVE TO THE X-RAY FLUORESCENCE METHOD) - PART 1: APPARATUS, REAGENTS, DISSOLUTION AND DETERMINATION OF GRAVIMETRIC SILICA |
DIN EN ISO 21079-2:2008-08
|
CHEMICAL ANALYSIS OF REFRACTORIES CONTAINING ALUMINA, ZIRCONIA AND SILICA - REFRACTORIES CONTAINING 5% TO 45% OF ZRO[2] (ALTERNATIVE TO THE X-RAY FLUORESCENCE METHOD) - PART 2: WET CHEMICAL ANALYSIS |
ASTM F 2883 : 2011
|
Standard Guide for Characterization of Ceramic and Mineral Based Scaffolds used for Tissue-Engineered Medical Products (TEMPs) and as Device for Surgical Implant Applications (Withdrawn 2020) |
ISO 21079-3:2008
|
Chemical analysis of refractories containing alumina, zirconia, and silica — Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) — Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma emission spectrometry (ICP -AES) |
EN ISO 1927-3:2012
|
Monolithic (unshaped) refractory products - Part 3: Characterization as received (ISO 1927-3:2012) |
UNI EN 725-4 : 2006
|
ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC POWDERS - PART 4: DETERMINATION OF OXYGEN CONTENT IN ALUMINIUM NITRIDE BY XRF ANALYSIS |
10/30196848 DC : 0
|
BS ISO 6474-2 - IMPLANTS FOR SURGERY - CERAMIC MATERIALS - PART 2: COMPOSITE MATERIALS BASED ON A HIGH PURITY ALUMINA MATRIX WITH ZIRCONIA REINFORCEMENT |
DIN EN ISO 10081-4:2014-12
|
Classification of dense shaped refractory products - Part 4: Special products (ISO 10081-4:2014) |
DIN EN ISO 21079-3:2008-08
|
CHEMICAL ANALYSIS OF REFRACTORIES CONTAINING ALUMINA, ZIRCONIA AND SILICA - REFRACTORIES CONTAINING 5% TO 45% OF ZRO[2] (ALTERNATIVE TO THE X-RAY FLUORESCENCE METHOD) - PART 3: FLAME ATOMIC ABSORPTION SPECTROPHOTOMETRY (FAAS) AND INDUCTIVELY COUPLED PLASMA EMISSION SPECTROMETRY (ICP-AES) |
DIN EN ISO 10081-4 E : 2014
|
CLASSIFICATION OF DENSE SHAPED REFRACTORY PRODUCTS - PART 4: SPECIAL PRODUCTS (ISO 10081-4:2014) |
UNI EN ISO 10081-4 : 2014
|
CLASSIFICATION OF DENSE SHAPED REFRACTORY PRODUCTS - PART 4: SPECIAL PRODUCTS |
08/30195061 DC : DRAFT DEC 2008
|
BS EN ISO 1927-3 - UNSHAPED REFRACTORY MATERIALS - PART 3: CHARACTERIZATION AS RECEIVED |
BS ISO 13356 : 2008
|
IMPLANTS FOR SURGERY - CERAMIC MATERIALS BASED ON YTTRIA-STABILIZED TETRAGONAL ZIRCONIA (Y-TZP) |
MIL-DTL-15606 Revision J:2012
|
BRICKS, REFRACTORY, AND BURNER TILE, NAVAL BOILER FURNACE LINING QUALITY |
13/30261099 DC : 0
|
BS ISO 17947 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - METHODS FOR CHEMICAL ANALYSIS OF FINE SILICON NITRIDE POWDERS |
DIN EN ISO 21079-1:2008-08
|
CHEMICAL ANALYSIS OF REFRACTORIES CONTAINING ALUMINA, ZIRCONIA AND SILICA - REFRACTORIES CONTAINING 5% TO 45% OF ZRO[2] (ALTERNATIVE TO THE X-RAY FLUORESCENCE METHOD) - PART 1: APPARATUS, REAGENTS AND DISSOLUTION |
12/30272391 DC : 0
|
BS EN ISO 13356 - IMPLANTS FOR SURGERY - CERAMIC MATERIALS BASED ON YTTRIA-STABILIZED TETRAGONAL ZIRCONIA (Y-TZP) |
BS EN ISO 21068-1:2008
|
Chemical analysis of silicon-carbide-containing raw materials and refractory products General information and sample preparation |
BS EN ISO 21079-1:2008
|
Chemical analysis of refractories containing alumina, zirconia and silica. Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) Apparatus, reagents and dissolution |
NF ISO 6474-1 : 2010
|
IMPLANTS FOR SURGERY - CERAMIC MATERIALS - PART 1: CERAMIC MATERIALS BASED ON HIGH PURITY ALUMINA |
I.S. EN ISO 21068-1:2008
|
CHEMICAL ANALYSIS OF SILICON-CARBIDE-CONTAINING RAW MATERIALS AND REFRACTORY PRODUCTS - PART 1: GENERAL INFORMATION AND SAMPLE PREPARATION |
I.S. CEN/TS 15418:2006
|
METHODS OF TEST FOR DENSE REFRACTORY PRODUCTS - GUIDELINES FOR TESTING THE CORROSION OF REFRACTORIES CAUSED BY LIQUIDS |
17/30327875 DC : DRAFT JAN 2017
|
BS ISO 16169 - PREPARATION OF SILICON CARBIDE AND SIMILAR MATERIALS FOR ANALYSIS BY ISO 12677 X-RAY FLUORESCENCE (XRF) - FUSED CAST-BEAD METHOD |
ISO 6474-2:2012
|
Implants for surgery Ceramic materials Part 2: Composite materials based on a high-purity alumina matrix with zirconia reinforcement |
NF EN ISO 14719 : 2012
|
CHEMICAL ANALYSIS OF REFRACTORY MATERIAL GLASS AND GLAZES - DETERMINATION OF FE2+ AND FE3+ BY THE SPECTRAL PHOTOMETRIC METHOD WITH 1,10-PHENANTHROLINE |
I.S. EN ISO 21068-3:2008
|
CHEMICAL ANALYSIS OF SILICON-CARBIDE-CONTAINING RAW MATERIALS AND REFRACTORY PRODUCTS - PART 3: DETERMINATION OF NITROGEN, OXYGEN AND METALLIC AND OXIDIC CONSTITUENTS |
I.S. EN ISO 1927-3:2012
|
MONOLITHIC (UNSHAPED) REFRACTORY PRODUCTS - PART 3: CHARACTERIZATION AS RECEIVED (ISO 1927-3:2012) |
I.S. EN 15309:2007
|
CHARACTERIZATION OF WASTE AND SOIL - DETERMINATION OF ELEMENTAL COMPOSITION BY X-RAY FLUORESCENCE |
I.S. EN ISO 20565-1:2008
|
CHEMICAL ANALYSIS OF CHROME-BEARING REFRACTORY PRODUCTS AND CHROME-BEARING RAW MATERIALS (ALTERNATIVE TO THE X-RAY FLUORESCENCE METHOD) - PART 1: APPARATUS, REAGENTS, DISSOLUTION AND DETERMINATION OF GRAVIMETRIC SILICA |
BS EN ISO 10081-2:2005
|
Classification of dense shaped refractory products Basic products containing less than 7 % residual carbon |
ISO 13356:2015
|
Implants for surgery — Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP) |
BS EN 1402-3:2003
|
Unshaped refractory products Characterization as received |
ISO 20565-3:2008
|
Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) — Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) |
ISO 1927-3:2012
|
Monolithic (unshaped) refractory products — Part 3: Characterization as received |
BS EN ISO 10081-3:2005
|
Classification of dense shaped refractory products Basic products containing from 7% to 50% residual carbon |
ISO 21068-1:2008
|
Chemical analysis of silicon-carbide-containing raw materials and refractory products Part 1: General information and sample preparation |
ISO 21068-3:2008
|
Chemical analysis of silicon-carbide-containing raw materials and refractory products Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents |
ISO 14719:2011
|
Chemical analysis of refractory material glass and glazes — Determination of Fe2+ and Fe3+ by the spectral photometric method with 1,10-phenanthroline |
ISO 10081-3:2003
|
Classification of dense shaped refractory products Part 3: Basic products containing from 7 % to 50 % residual carbon |
EN ISO 21079-1:2008
|
Chemical analysis of refractories containing alumina, zirconia and silica - Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) - Part 1: Apparatus, reagents and dissolution (ISO 21079-1:2008) |
EN ISO 21068-3:2008
|
Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents (ISO 21068-3:2008) |
EN ISO 14719:2011
|
Chemical analysis of refractory material glass and glazes - Determination of Fe2+ and Fe3+ by the spectral photometric method with 1,10-phenanthroline (ISO 14719:2011) |
EN ISO 20565-3:2008
|
Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) (ISO 20565-3:2008) |
EN 1402-3:2003
|
Unshaped refractory products - Part 3: Characterization as received |
EN ISO 21079-3:2008
|
Chemical analysis of refractories containing alumina, zirconia, and silica - Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma emission spectrometry (ICP -AES) (ISO 21079-3:2008) |
EN 15309:2007
|
Characterization of waste and soil - Determination of elemental composition by X-ray fluorescence |
EN ISO 21079-2:2008
|
Chemical analysis of refractories containing alumina, zirconia, and silica - Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) - Part 2: Wet chemical analysis (ISO 21079-2:2008) |
EN ISO 21068-1:2008
|
Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 1: General information and sample preparation (ISO 21068-1:2008) |
EN ISO 20565-1 : 2008
|
Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica (ISO 20565-1:2008) |
EN 725-4:2006
|
Advanced technical ceramics - Methods of test for ceramic powders - Part 4: Determination of oxygen content in aluminium nitride by XRF analysis |
EN ISO 13356:2015
|
Implants for surgery - Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP) (ISO 13356:2015) |
DIN EN ISO 14719:2012-03
|
Chemical analysis of refractory material glass and glazes - Determination of Fe<(hoch)2+> and Fe<(hoch)3+> by the spectral photometric method with 1,10-phenanthroline (ISO 14719:2011) |
BS EN ISO 21079-2:2008
|
Chemical analysis of refractories containing alumina, zirconia, and silica. Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) Wet chemical analysis |
07/30163486 DC : 0
|
BS EN ISO 21079-3 - CHEMICAL ANALYSIS OF REFRACTORIES CONTAINING ALUMINA, ZIRCONIA, AND SILICA - REFRACTORIES CONTAINING 5% TO 45% OF ZRO[2] (ALTERNATIVE TO THE X-RAY FLUORESCENCE METHOD) - PART 3: FLAME ATOMIC ABSORPTION SPECTROPHOTOMETRY (FAAS) AND INDUCTIVELY COUPLED PLASMA EMISSION SPECTROMETRY (ICP-AES) |
DIN EN ISO 20565-1 E : 2009
|
CHEMICAL ANALYSIS OF CHROME-BEARING REFRACTORY PRODUCTS AND CHROME-BEARING RAW MATERIALS (ALTERNATIVE TO THE X-RAY FLUORESCENCE METHOD) - PART 1: APPARATUS, REAGENTS, DISSOLUTION AND DETERMINATION OF GRAVIMETRIC SILICA |
DIN EN 15309:2007-08
|
Characterization of waste and soil - Determination of elemental composition by X-ray fluorescence |
ISO 18227:2014
|
Soil quality — Determination of elemental composition by X-ray fluorescence |
UNI EN ISO 21079-3 : 2008
|
CHEMICAL ANALYSIS OF REFRACTORIES CONTAINING ALUMINA, ZIRCONIA, AND SILICA - REFRACTORIES CONTAINING 5% TO 45% OF ZRO[2] (ALTERNATIVE TO THE X-RAY FLUORESCENCE METHOD) - PART 3: FLAME ATOMIC ABSORPTION SPECTROPHOTOMETRY (FAAS) AND INDUCTIVELY COUPLED PLASMA EMISSION SPECTROMETRY (ICP-AES) |
UNI EN ISO 14719 : 2012
|
CHEMICAL ANALYSIS OF REFRACTORY MATERIAL GLASS AND GLAZES - DETERMINATION OF FE[2+] AND FE[3+] BY THE SPECTRAL PHOTOMETRIC METHOD WITH 1,10-PHENANTHROLINE |
BS ISO 6474-2:2012
|
Implants for surgery. Ceramic materials Composite materials based on a high-purity alumina matrix with zirconia reinforcement |
UNI EN ISO 20565-3 : 2009
|
CHEMICAL ANALYSIS OF CHROME-BEARING REFRACTORY PRODUCTS AND CHROME-BEARING RAW MATERIALS PRODUCTS (ALTERNATIVE TO THE X-RAY FLUORESCENCE METHOD) - PART 3: FLAME ATOMIC ABSORPTION SPECTROMETRY (FAAS) AND INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRY (ICP-AES) |
BS EN ISO 20565-3:2008
|
Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) |
I.S. EN ISO 20565-3:2008
|
CHEMICAL ANALYSIS OF CHROME-BEARING REFRACTORY PRODUCTS AND CHROME-BEARING RAW MATERIALS (ALTERNATIVE TO THE X-RAY FLUORESCENCE METHOD) - PART 3: FLAME ATOMIC ABSORPTION SPECTROMETRY (FAAS) AND INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRY (ICP-AES) |
ISO 20565-1:2008
|
Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) — Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica |
ISO 10081-2:2003
|
Classification of dense shaped refractory products Part 2: Basic products containing less than 7 % residual carbon |
DIN EN ISO 10081-3:2005-05
|
Classification of dense shaped refractory products - Part 3: Basic products containing from 7 % to 50 % residual carbon (ISO 10081-3:2003) |
CEN/TS 15418:2006
|
Methods of test for dense refractory products - Guidelines for testing the corrosion of refractories caused by liquids |
DIN EN ISO 10081-2:2005-05
|
Classification of dense shaped refractory products - Part 2: Basic products containing less than 7 % residual carbon (ISO 10081-2:2003) |
EN ISO 10081-4:2014
|
Classification of dense shaped refractory products - Part 4: Special products (ISO 10081-4:2014) |