UNE-EN 60320-3:2015
|
Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges |
DIN ISO 6284 E : 1997
|
CONSTRUCTION DRAWINGS - INDICATION OF LIMIT DEVIATIONS |
I.S. EN ISO 286-2:2010
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS (ISO 286-2:2010) |
DIN ISO 8062:1998-08
|
CASTINGS - SYSTEM OF DIMENSIONAL TOLERANCES AND MACHINING ALLOWANCES |
UNE-EN 10088-5:2010
|
Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
15/30325929 DC : 0
|
BS EN 61202-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC ISOLATORS - PART 1: GENERIC SPECIFICATION |
10/30234318 DC : DRAFT DEC 2010
|
BS EN 12561-2 - RAILWAY APPLICATIONS - TANK WAGONS - PART 2: BOTTOM EMPTYING DEVICES FOR LIQUID PRODUCTS INCLUDING VAPOUR RETURN |
BS ISO 8131:1992
|
Hydraulic fluid power. Single rod cylinders, 16 MPa (160 bar) compact series. Tolerances |
BS ISO 14368-2:2003
|
Mineral and sapphire watch-glasses Assembly to the case by adhesive or using a gasket |
ISO 3764:2016
|
Timekeeping instruments Movements Types, dimensions and nomenclature |
I.S. EN 10045-1:1991
|
METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD |
I.S. EN 61202-1:2017
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC ISOLATORS - PART 1: GENERIC SPECIFICATION |
BS ISO 3547-5:2007
|
Plain bearings. Wrapped bushes Checking the outside diameter |
BS 5983-3:1982
|
Metric spherical plain bearings Specification for dimensions of spherical plain radial bearings, joint type, dimension series EW, bearings with extended inner ring |
02/614072 DC : DRAFT NOV 2002
|
EN ISO 9409-1 - MANIPULATING INDUSTRIAL ROBOTS - MECHANICAL INTERFACES - PART 1: PLATES |
04/104967 DC : DRAFT APR 2004
|
ISO/DIS 10766 - HYDRAULIC FLUID POWER - CYLINDERS - HOUSING DIMENSIONS FOR RECTANGULAR-SECTION-CUT BEARING RINGS FOR PISTONS AND RODS |
12/30250149 DC : 0
|
BS ISO 16143-2 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 2: SEMI-FINISHED PRODUCTS, BARS, RODS AND SECTIONS |
BS ISO 8015:1985
|
Technical drawings. Fundamental tolerancing principle |
I.S. EN ISO 1938-2:2017
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017) |
05/30138267 DC : DRAFT AUG 2005
|
EN 1426 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
15/30321493 DC : 0
|
BS ISO 129-1 - TECHNICAL PRODUCT DOCUMENTATION (TPD) - INDICATION OF DIMENSIONS AND TOLERANCES - PART 1: GENERAL PRINCIPLES |
13/30286407 DC : 0
|
BS ISO 10766 - HYDRAULIC FLUID POWER - CYLINDERS - HOUSING DIMENSIONS FOR RECTANGULAR-SECTION-CUT BEARING RINGS FOR PISTONS AND RODS |
BS ISO 11922-2:1997
|
Thermoplastics pipes for the conveyance of fluids. Dimensions and tolerances Inch-based series |
ISO 7789:2007
|
Hydraulic fluid power Two-, three- and four-port screw-in cartridge valves Cavities |
13/30263803 DC : 0
|
BS ISO 17296-4 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 4: DATA PROCESSING |
03/109881 DC : DRAFT JULY 2003
|
ISO 15242-2 - ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 2: RADIAL BALL BEARINGS WITH CYLINDRICAL BORE AND CYLINDRICAL OUTSIDE SURFACE |
BS ISO 3548-2:2009
|
Plain bearings. Thin-walled half bearings with or without flange Measurement of wall thickness and flange thickness |
BS EN ISO 14405-1:2010
|
Geometrical product specifications (GPS). Dimensional tolerancing Linear sizes |
CEI EN 62074-1 : 2014
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC WDM DEVICES - PART 1: GENERIC SPECIFICATION |
BS EN 60603-1:2000
|
Connectors for frequencies below 3 MHz for use with printed boards Generic specification. General requirements and guide for the preparation of detail specifications with assessed quality |
06/30145675 DC : DRAFT SEP 2006
|
ISO 12301 - PLAIN BEARINGS - QUALITY CONTROL TECHNIQUES AND INSPECTION OF GEOMETRICAL AND MATERIAL QUALITY CHARACTERISTICS |
08/30173839 DC : 0
|
BS ISO 3548-2 - PLAIN BEARINGS - THIN-WALLED HALF BEARINGS WITH OR WITHOUT FLANGE - PART 2: MEASUREMENT OF WALL THICKNESS AND FLANGE THICKNESS |
14/30299349 DC : 0
|
BS EN ISO 1938-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES |
NF EN ISO 286-2 : 2010
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS |
BIS IS 6353 : 2014
|
END MILLS WITH PARALLEL SHANK - SPECIFICATION |
17/30315891 DC : 0
|
BS ISO 19690-2 - DISC SPRINGS - PART 2: TECHNICAL SPECIFICATIONS |
06/30146724 DC : 0
|
EN 10277-1 - BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL |
BS ISO 10552:2014
|
Timekeeping instruments. Crowns and sealed tubes. Designs and dimensions |
BS EN 61978-1:2014
|
Fibre optic interconnecting devices and passive components. Fibre optic passive chromatic dispersion compensators Generic specification |
CEI EN 60876-1 : 2015
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC SPATIAL SWITCHES - PART 1: GENERIC SPECIFICATION |
16/30323124 DC : 0
|
BS ISO 20054 - PLAIN BEARINGS - BEARINGS CONTAINING DISPERSED SOLID LUBRICANTS |
I.S. EN ISO 14405-1:2016
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 1: LINEAR SIZES (ISO/DIS 14405-1:2013) |
00/715331 DC : 0
|
ISO/CD 8434-6 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 6: 60 DEGREE CONE CONNECTORS WITH OR WITHOUT O-RING |
EN 61243-1:2005/A1:2010
|
LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C. |
10/30234327 DC : DRAFT DEC 2010
|
BS EN 12561-5 - RAILWAY APPLICATIONS - TANK WAGONS - PART 5: DEVICES FOR VAPOUR RETURN WHILE FILLING OR EMPTYING OF LIQUID PRODUCTS |
12/30262686 DC : 0
|
BS EN ISO 2692 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR) |
BS EN ISO 8062-3:2007
|
Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts General dimensional and geometrical tolerances and machining allowances for castings |
I.S. EN ISO 14638:2015
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015) |
BS EN 50033:1991
|
Specification for construction and testing of miners\' caplamps in relation to the risk of explosion, for mines susceptible to firedamp |
08/30184283 DC : DRAFT SEP 2008
|
BS EN 12561-4 - RAILWAY APPLICATIONS - TANK WAGONS - PART 4: TOP DEVICES FOR TOP EMPTYING AND FILLING OF LIQUID PRODUCTS |
03/106013 DC : DRAFT MAR 2003
|
ISO 22917 - SUPERABRASIVES - LIMIT DEVIATIONS AND RUN OUT TOLERANCES FOR GRINDING WHEELS WITH DIAMOND OR CUBIC BORON NITRIDE |
08/30184289 DC : DRAFT SEP 2008
|
BS EN 12561-6 - RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES |
BS ISO 5408:2009
|
Screw threads. Vocabulary |
BS ISO 5145:2017
|
Gas cylinders. Cylinder valve outlets for gases and gas mixtures. Selection and dimensioning |
I.S. EN ISO 17450-2:2012
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS, UNCERTAINTIES AND AMBIGUITIES (ISO 17450-2:2012) |
08/30174605 DC : DRAFT SEP 2008
|
BS ISO 5597 - HYDRAULIC FLUID POWER - CYLINDERS - HOUSINGS FOR SINGLE-ACTING PISTON AND ROD SEALS IN RECIPROCATING APPLICATIONS - DIMENSIONS AND TOLERANCES |
BS QC010000(1993) : AMD 10432
|
HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS. CONNECTORS FOR FREQUENCIES BELOW 3 MHz FOR USE WITH PRINTED BOARDS - GENERIC SPECIFICATION: GENERAL REQUIREMENTS AND GUIDE FOR THE PREPARATION OF DETAIL SPECIFICATIONS, WITH ASSESSED QUALITY |
UNE-EN ISO 17450-2:2015
|
Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012) |
93/710118 DC : 0
|
PREN 3238 - AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS EXCEPT ALUMINIUM AND ALUMINIUM ALLOYS - SHEAR TEST FOR WIRES AND RIVETS |
08/30184169 DC : DRAFT JUNE 2008
|
BS EN 61243-3 - LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE |
07/30171301 DC : 0
|
BS EN 3238 - AEROSPACE SERIES - METALLIC MATERIALS - TEST METHOD - SHEAR TEST FOR WIRES AND RIVETS |
ISO 6489-5:2011
|
Agricultural vehicles Mechanical connections between towed and towing vehicles Part 5: Specifications for non-swivel clevis couplings |
ABMA ISO 10285 : 2009 : R2015
|
ROLLING BEARINGS - SLEEVE TYPE LINEAR BALL BEARINGS - BOUNDARY DIMENSIONS AND TOLERANCES |
BIS IS 6352 : 2014
|
SLOT DRILLS WITH PARALLEL SHANK - SPECIFICATION |
EN 28167:1992
|
Projections for resistance welding (8167:1989) |
PREN 3238 : 200P1
|
AEROSPACE SERIES - METALLIC MATERIALS - TEST METHOD - SHEAR TEST FOR WIRES AND RIVETS |
PREN 6072 : 200P2
|
AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - CONSTANT AMPLITUDE FATIGUE TESTING |
I.S. EN 62074-1:2014
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC WDM DEVICES - PART 1: GENERIC SPECIFICATION |
EN 62077:2016
|
Fibre optic interconnecting devices and passive components - Fibre optic circulators - Generic specification |
I.S. EN 60740-1:2005
|
LAMINATIONS FOR TRANSFORMERS AND INDUCTORS - PART 1: MECHANICAL AND ELECTRICAL CHARACTERISTICS |
I.S. EN 61977:2015
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FILTERS - GENERIC SPECIFICATION |
I.S. EN 62077:2016
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CIRCULATORS - GENERIC SPECIFICATION |
I.S. CWA 14949:2004
|
FUNSTEP AP-APPLICATION INTERPRETED MODEL, INCLUDING VALIDATION GUIDELINES |
UNE-EN ISO 286-2:2011
|
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010) |
I.S. EN ISO 14405-2:2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011) |
BS 2000-49(2000) : 2000
|
METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
CEI EN 50033 : 1998
|
ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - CAPLAMPS FOR MINES SUSCEPTIBLE TO FIREDAMP |
ISO 14649-10:2004
|
Industrial automation systems and integration — Physical device control — Data model for computerized numerical controllers — Part 10: General process data |
UNI EN 3238 : 2011
|
AEROSPACE SERIES - METALLIC MATERIALS - TEST METHOD - SHEAR TEST FOR WIRES AND RIVETS |
ISO 3245:2015
|
Rolling bearings — Needle roller bearings with drawn cup and without inner ring — Boundary dimensions, geometrical product specifications (GPS) and tolerance values |
ONORM EN ISO 15245-1 : 2013
|
GAS CYLINDERS - PARALLEL THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATION (ISO 15245-1:2001 + AMD 1:2013) |
ISO 6195:2013
|
Fluid power systems and components Cylinder-rod wiper-ring housings in reciprocating applications Dimensions and tolerances |
ISO 3548-2:2009
|
Plain bearings Thin-walled half bearings with or without flange Part 2: Measurement of wall thickness and flange thickness |
UNE-EN ISO 14405-1:2012
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 1: LINEAR SIZES (ISO 14405-1:2010) |
ISO/TS 23768-1:2011
|
Rolling bearings — Parts library — Part 1: Reference dictionary for rolling bearings |
BS 2000-49(2007) : 2007
|
BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
BS EN 61076-1:2006
|
Connectors for electronic equipment. Product requirements Generic specification |
NF ISO 1174-1 : 2011
|
ASSEMBLY TOOLS FOR SCREWS AND NUTS - DRIVING SQUARES - PART 1: DRIVING SQUARES FOR HAND SOCKET TOOLS |
BS ISO 22917:2016
|
Precision superabrasives. Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride |
UNI EN ISO 17450-2 : 2012
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS, UNCERTAINTIES AND AMBIGUITIES |
I.S. EN 10088-5:2009
|
STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
UNE-EN ISO 14405-2:2015
|
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011) |
I.S. EN ISO 1179-2:2013
|
CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E) (ISO 1179-2:2013) |
ISO 7465:2007
|
Passenger lifts and service lifts — Guide rails for lift cars and counterweights — T-type |
DIN EN 12561-4:2011-10
|
Railway applications - Tank wagons - Part 4: Devices for top filling and emptying of liquid products |
UNE-EN 12561-4:2012
|
Railway applications - Tank wagons - Part 4: Devices for top filling and emptying of liquid products |
BS EN 12561-5:2011
|
Railway applications. Tank wagons Devices for vapour return while filling or emptying of liquid products |
UNE-EN 10272:2016
|
Stainless steel bars for pressure purposes |
IEC 62496-4:2011
|
Optical circuit boards - Part 4: Interface standards - General and guidance |
IEC 60320-3:2014
|
Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges |
BS EN ISO 4759-3:2000
|
Tolerances for fasteners Plain washers for bolts, screws and nuts. Product grades A and C |
BS EN 10272:2007
|
Stainless steel bars for pressure purposes |
BS EN ISO 2692:2014
|
Geometrical product specifications (GPS). Geometrical tolerancing. Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) |
UNE-EN ISO 14405-1:2012
|
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2010) |
EN 62496-1:2009
|
Optical circuit boards - Part 1: General |
DIN ISO 22917:2017-11
|
PRECISION SUPERABRASIVES - LIMIT DEVIATIONS AND RUNOUT TOLERANCES FOR GRINDING WHEELS WITH DIAMOND OR CUBIC BORON NITRIDE (ISO 22917:2016) |
EN 10277-1:2008
|
Bright steel products - Technical delivery conditions - Part 1: General |
EN 61243-3:2014/AC:2015
|
LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE |
EN ISO 148-1:2016
|
Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016) |
DIN ISO 8489-2:1997-05
|
TEXTILE MACHINERY AND ACCESSORIES - CONES FOR CROSS WINDING - PART 2: DIMENSIONS, TOLERANCES AND DESIGNATION OF CONES WITH HALF ANGLE OF 3 DEGREES 30 MINUTES |
EN 61314-1:2012
|
Fibre optic interconnecting devices and passive components - Fibre optic fan-outs - Part 1: Generic specification |
EN 62134-1:2009
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION |
EN 10088-3:2014
|
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
EN 60740-1:2005
|
Laminations for transformers and inductors - Part 1: Mechanical and electrical characteristics |
EN 50109-2-4:1995
|
Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-4: Particular requirements for centre contacts of RF connectors, series SMZ |
EN ISO 14638:2015
|
Geometrical product specifications (GPS) - Matrix model (ISO 14638:2015) |
EN 10272:2016
|
Stainless steel bars for pressure purposes |
EN 10304:2001
|
Magnetic materials (iron and steel) for use in relays |
EN 61797-1:1996
|
Transformers and inductors for use in telecommunication and electronic equipment - Main dimensions of coil formers - Part 1: Coil formers for laminated cores |
EN ISO 15848-1:2015/A1:2017
|
Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves - Amendment 1 (ISO 15848-1:2015/Amd 1:2017) |
DIN ISO 8489-3:1997-05
|
TEXTILE MACHINERY AND ACCESSORIES - CONES FOR CROSS WINDING - PART 3: DIMENSIONS, TOLERANCES AND DESIGNATION OF CONES WITH A HALF ANGLE OF 4 DEGREES 20 MINUTES |
EN 12561-6:2011 (edition 2)
|
Railway applications - Tank wagons - Part 6: Manholes |
EN 175500:1997
|
Sectional specification: Cable outlet accessories for connectors, including qualification approval and capability approval |
EN 60874-1:2012
|
Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic specification |
EN 61076-1:2006
|
Connectors for electronic equipment - Product requirements - Part 1: Generic specification |
EN 12561-5:2011
|
Railway applications - Tank wagons - Part 5: Devices for vapour return while filling or emptying of liquid products |
EN 60404-8-6:2017
|
Magnetic materials - Part 8-6: Specifications for individual materials - Soft magnetic metallic materials |
EN 10045-1 : 1990
|
METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD |
DIN EN ISO 8434-1:2008-02
|
METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
NBR 16080 : 2013
|
INTERNAL COMBUSTION ENGINES - CYLINDER LINERS ASSEMBLED IN THE BLOCK WITH OR WITHOUT CONTACT WITH THE COOLANT (WET AND DRY TYPE RESPECTIVELY) |
ONORM EN ISO 1179-2 : 2014
|
CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E) (ISO 1179-2:2013) |
OVE/ONORM EN 61243-3 : 2015
|
LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE (IEC 61243-3:2014 + COR.1:2015) |
ONORM EN ISO 293 : 2005
|
PLASTICS - COMPRESSION MOULDING TEST SPECIMENS OF THERMOPLASTIC MATERIALS |
I.S. EN ISO 17296-3:2016
|
ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - PART 3: MAIN CHARACTERISTICS AND CORRESPONDING TEST METHODS (ISO 17296-3:2014) |
DIN SPEC 91184 E : 2014
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013) |
DIN ISO 29262:2013-03
|
Production equipment for microsystems - Interface between end effector and handling system (ISO 29262:2011) |
BS ISO 4639-2:1995
|
Rubber tubing and hoses for fuel circuits for internal-combustion engines. Specification Oxygenated fuels |
BS ISO 17296-3 : 2014
|
ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - PART 3: MAIN CHARACTERISTICS AND CORRESPONDING TEST METHODS |
09/30197465 DC : 0
|
BS ISO 6489-5 - AGRICULTURAL VEHICLES - MECHANICAL CONNECTIONS BETWEEN TOWED AND TOWING VEHICLES - PART 5: SPECIFICATIONS FOR NON-SWIVEL CLEVIS COUPLINGS |
14/30279051 DC : 0
|
BS EN ISO 15848-1 - INDUSTRIAL VALVES - MEASUREMENT, TEST AND QUALIFICATION PROCEDURES FOR FUGITIVE EMISSIONS - PART 1: CLASSIFICATION SYSTEM AND QUALIFICATION PROCEDURES FOR TYPE TESTING OF VALVES |
CEI EN 62496-1 : 2010
|
OPTICAL CIRCUIT BOARDS - PART 1: GENERAL |
10/30165662 DC : 0
|
BS ISO 13706 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AIRCOOLED HEAT EXCHANGERS |
BS EN 60876-1:2014
|
Fibre optic interconnecting devices and passive components. Fibre optic spatial switches Generic specification |
14/30304194 DC : 0
|
BS EN 61977 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTICFILTERS - GENERIC SPECIFICATION |
BS ISO 29262:2011
|
Production equipment for microsystems. Interface between end effector and handling system |
BS EN ISO 148-1:2016
|
Metallic materials. Charpy pendulum impact test Test method |
09/30203522 DC : 0
|
BS ISO 1174-1 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - DRIVING SQUARES - PART 1: DRIVING SQUARES FOR HAND SOCKET TOOLS |
BS QC 880000-1(1995) : 1995 AMD 9689
|
HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - FIBRE OPTIC FAN-OUTS - GENERIC SPECIFICATION |
BS ISO 10285 : 2007
|
ROLLING BEARINGS - SLEEVE TYPE LINEAR BALL BEARINGS - BOUNDARY DIMENSIONS AND TOLERANCES |
BS EN 61202-1:2017
|
Fibre optic interconnecting devices and passive components. Fibre optic isolators Generic specification |
ISO 4401:2005
|
Hydraulic fluid power — Four-port directional control valves — Mounting surfaces |
BS ISO 13074:2012
|
Analogue quartz clocks. Fitting dimensions of movements to hands |
DIN CEN ISO/TS 8062-2;DIN SPEC 91184:2014-03
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013) |
DIN ISO 3547-5:2015-12
|
PLAIN BEARINGS - WRAPPED BUSHES - PART 5: CHECKING THE OUTSIDE DIAMETER (ISO 3547-5:2007) |
16/30290140 DC : 0
|
BS EN ISO 8434-1 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREES CONE CONNECTORS |
BS EN 10088-5:2009
|
Stainless steels Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
ISO 3765:1998
|
Timekeeping instruments — Wristwatches — Dimensions of bracelet-to-case fastening elements |
96/704404 DC : 0
|
ISO/DIS 9121 - GEOMETRICAL PRODUCT SPECIFICATION (GPS) - DIMENSIONAL MEASURING INSTRUMENTS - INTERNAL MICROMETERS WITH TWO-POINT CONTACT - DESIGN AND METROLOGICAL REQUIREMENTS |
99/710247 DC : DRAFT JUN 1999
|
PREN 2003-2 - AEROSPACE SERIES - STEELS - TEST METHODS - PART 2: IZOD IMPACT TEST |
BS ISO 6621-1:2007
|
Internal combustion engines. Piston rings Vocabulary |
BS EN 61243-1 : 2005
|
LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C. |
10/30234330 DC : DRAFT DEC 2010
|
BS EN 12561-6 - RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES |
PD CEN ISO/TS 8062-2:2013
|
Geometrical Product Specifications (GPS). Dimensional and geometrical tolerances for moulded parts Rules |
BS 4500-1.2(1990) : AMD 7631
|
ISO LIMITS AND FITS - GENERAL, TOLERANCES AND DEVIATIONS - TABLES OF COMMONLY USED TOLERANCE GRADES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS |
BS EN ISO 17450-2:2012
|
Geometrical product specifications (GPS). General concepts Basic tenets, specifications, operators, uncertainties and ambiguities |
ISO 16287:2005
|
Plain bearings Thermoplastic bushes Dimensions and tolerances |
BS ISO 14368-1:2000
|
Mineral and sapphire watch-glasses Dimensions and tolerances |
DIN EN ISO 148-1:2015-09 (Draft)
|
METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 1: TEST METHOD (ISO 148-1:2016) |
13/30292791 DC : 0
|
BS EN ISO 14405-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 1: LINEAR SIZES |
BS ISO 3601-2:2016
|
Fluid power systems. O-rings Housing dimensions for general applications |
UNE-EN ISO 148-1:2017
|
Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016) |
ISO 12301:2007
|
Plain bearings — Quality control techniques and inspection of geometrical and material quality characteristics |
13/30271610 DC : 0
|
BS ISO 17296-3 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 3: TEST METHODS |
03/116547 DC : DRAFT NOV 2003
|
EN ISO 15848-1 - INDUSTRIAL VALVES - FUGITIVE EMISSIONS - MEASUREMENT TEST AND QUALIFICATION PROCEDURES - PART 1: CLASSIFICATION SYSTEM AND QUALIFICATION PROCEDURES FOR TYPE TEST OF VALVE ASSEMBLIES |
08/30161340 DC : DRAFT FEB 2008
|
BS EN 60404-8-10 - MAGNETIC MATERIALS - PART 8: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SECTION 10: SPECIFICATIONS FOR MAGNETIC MATERIALS (IRON AND STEEL) FOR USE IN RELAYS |
14/30294680 DC : 0
|
BS ISO 19259 - PLAIN BEARINGS - BEARINGS WITH EMBEDDED SOLID LUBRICANT |
BS 6186-1:Addendum No. 1:1993
|
Specification for straight cylindrical involute splines: metric module, side fit Inspection |
92/76647 DC : DRAFT MAY 1992
|
PREN 2004-4 - AEROSPACE SERIES - TEST METHODS FOR ALUMINIUM AND ALUMINIUM ALLOY PRODUCTS - PART 4: STRESS CORROSION TEST BY ALTERNATE IMMERSION FOR HIGH STRENGTH ALUMINIUM ALLOY WROUGHT PRODUCTS |
UNI EN ISO 8062-3 : 2009
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS |
DIN CEN ISO/TS 8062-2; DIN SPEC 91184:2014-03
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013) |
BS ISO 14368-3:2003
|
Mineral and sapphire watch-glasses Qualitative criteria and test methods |
NF ISO 8015 : 2006
|
TECHNICAL DRAWINGS - FUNDAMENTAL TOLERANCING PRINCIPLE |
10/30218221 DC : 0
|
BS EN 61314-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION |
BS EN 3238:2010
|
Aerospace series. Metallic materials. Test method. Shear test for wires and rivets |
15/30314221 DC : 0
|
BS ISO 22917 - SUPERABRASIVES - LIMIT DEVIATIONS AND RUN-OUT TOLERANCES FOR GRINDING WHEELS WITH DIAMOND OR CUBIC BORON NITRIDE |
13/30288636 DC : 0
|
BS EN 60876-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC SPATIAL SWITCHES - PART 1: GENERIC SPECIFICATION |
IEC 60852-3:1992
|
Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 3: Transformers and inductors using YUI-1 laminations |
14/30304198 DC : 0
|
BS EN 62077 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CIRCULATORS - GENERIC SPECIFICATION |
BS 8887-1:2006
|
Design for manufacture, assembly, disassembly and end-of-life processing (MADE) General concepts, process and requirements |
BS 341-3:2002
|
Transportable gas container valves Valve outlet connections |
I.S. EN 61314-1:2012
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION (IEC 61314-1:2011 (EQV)) |
05/30127444 DC : DRAFT JAN 2005
|
ISO 10303-238 - INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - PART 238: APPLICATION PROTOCOL - APPLICATION INTERPRETED MODEL FOR COMPUTERIZED NUMERIC CONTROLLERS |
BS EN ISO 286-2:2010
|
Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes Tables of standard tolerance classes and limit deviations for holes and shafts |
08/30180281 DC : DRAFT JUNE 2008
|
BS EN 1966 - STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD |
08/30184286 DC : DRAFT SEP 2008
|
BS EN 12561-5 - RAILWAY APPLICATIONS - TANK WAGONS - PART 5: TOP DEVICES FOR BOTTOM EMPTYING AND TOP FILLING OF LIQUID PRODUCTS |
00/706500 DC : DRAFT MAR 2000
|
ISO/DIS 5692-2 - AGRICULTURAL VEHICLES - MECHANICAL CONNECTIONS ON TOWED VEHICLES - PART 2: COUPLING RING 40 WITH SOCKET |
CEI EN 61073-1 : 2010
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - MECHANICAL SPLICES AND FUSION SPLICE PROTECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION |
CEI EN 61314-1 : 2012
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION |
BS ISO 4156-3:2005
|
Straight cylindrical involute splines. Metric module, side fit Inspection |
EN ISO 2692:2014
|
Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2014) |
04/30112654 DC : 0
|
IEC 60740-1 ED.1 - LAMINATIONS FOR TRANSFORMERS AND INDUCTORS - PART 1: MECHANICAL AND ELECTRICAL CHARACTERISTICS |
BS EN 62099:2001
|
Fibre optic wavelength switches. Generic specification |
BS 2000-49(2015) : 2015
|
BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
07/30167285 DC : 0
|
BS EN 60869-1 - FIBRE OPTIC PASSIVE POWER CONTROL DEVICES - PART 1: GENERIC SPECIFICATION |
BS EN 175500:1997
|
Harmonized system of quality assessment for electronic components. Sectional specification:cable outlet accessories for connectors, including qualification approval and capability approval |
ISO 13942:2000
|
Bonded abrasive products Limit deviations and run-out tolerances |
NF EN 61202-1 : 2009
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC ISOLATORS - PART 1: GENERIC SPECIFICATION |
IEEE C37.100.1-2007
|
IEEE Standard of Common Requirements for High Voltage Power Switchgear Rated Above 1000 V |
BS ISO 4639-3:1995
|
Rubber tubing and hoses for fuel circuits for internal-combustion engines. Specification Oxidized fuels |
BS EN 61243-3:2014
|
Live working. Voltage detectors Two-pole low-voltage type |
I.S. EN 61269-1:1999
|
FIBRE OPTIC TERMINUS SETS - PART 1: GENERIC SPECIFICATION |
IEC 61243-1:2003+AMD1:2009 CSV
|
Live working - Voltage detectors - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c. |
I.S. EN 62134-1:2009
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION |
I.S. EN 60875-1:2015
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - NON-WAVELENGTH-SELECTIVE FIBRE OPTIC BRANCHING DEVICES - PART 1: GENERIC SPECIFICATION |
BS EN ISO 14405-2:2011
|
Geometrical product specifications (GPS). Dimensional tolerancing Dimensions other than linear sizes |
ISO 1174-1:2011
|
Assembly tools for screws and nuts — Driving squares — Part 1: Driving squares for hand socket tools |
I.S. EN 62496-4:2011
|
OPTICAL CIRCUIT BOARDS - PART 4: INTERFACE STANDARDS - GENERAL AND GUIDANCE |
PREN 10272 : DRAFT 2013
|
STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
ISO 10285:2007
|
Rolling bearings — Sleeve type linear ball bearings — Boundary dimensions and tolerances |
DIN EN ISO 8434-1 E : 2008
|
METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
EN ISO 14405-2:2011
|
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011) |
UNI ISO 7465 : 2010
|
PASSENGER LIFTS AND SERVICE LIFTS - GUIDE RAILS FOR LIFT CARS AND COUNTERWEIGHTS - T-TYPE |
DIN EN ISO 14405-2:2012-03
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011) |
BS EN 60875-1:2015
|
Fibre optic interconnecting devices and passive components. Non-wavelength-selective fibre optic branching devices Generic specification |
CEI EN 60603-1 : 2001
|
CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 1: GENERIC SPECIFICATION; GENERAL REQUIREMENTS AND GUIDE FOR THE PREPARATION OF DETAIL SPECIFICATIONS, WITH ASSESSED QUALITY |
UNI EN ISO 15245-1 : 2013
|
GAS CYLINDERS - PARALLEL THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATION |
ISO/TR 17209:2013
|
Hydraulic fluid power Two-, three- and four-port screw-in cartridge valves Cavities with ISO 725 (UN and UNF) threads |
NF EN 61243-1 : 2005 AMD 1 2010
|
LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C. |
BS EN ISO 8434-1:2007
|
Metallic tube connections for fluid power and general use 24 degree cone connectors |
ISO 10303-223:2008
|
Industrial automation systems and integration — Product data representation and exchange — Part 223: Application protocol: Exchange of design and manufacturing product information for cast parts |
ISO 3408-1:2006
|
Ball screws Part 1: Vocabulary and designation |
EN 1426:2015
|
Bitumen and bituminous binders - Determination of needle penetration |
ISO 14679:1997
|
Adhesives — Measurement of adhesion characteristics by a three-point bending method |
DIN EN 12890 : 2002-05
|
FOUNDING - PATTERNS, PATTERN EQUIPMENT AND COREBOXES FOR THE PRODUCTION OF SAND MOULDS AND SAND CORES |
CSA C22.2 No. 60320-1 : 2011 : R2016
|
APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 1: GENERAL REQUIREMENTS |
DIN EN ISO 293:2005-10
|
Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004) |
BS EN ISO 9409-1:2004
|
Manipulating industrial robots. Mechanical interfaces Plates |
ISO 15848-1:2015
|
Industrial valves Measurement, test and qualification procedures for fugitive emissions Part 1: Classification system and qualification procedures for type testing of valves |
UNE-EN ISO 2692:2015
|
Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2014) |
ISO 8062-3:2007
|
Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings |
UNE-EN 12561-5:2012
|
Railway applications - Tank wagons - Part 5: Devices for vapour return while filling or emptying of liquid products |
I.S. EN 12561-4:2011
|
RAILWAY APPLICATIONS - TANK WAGONS - PART 4: DEVICES FOR TOP FILLING AND EMPTYING OF LIQUID PRODUCTS |
I.S. EN ISO 14660-1:2000
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL FEATURES - PART 1: GENERAL TERMS AND DEFINITIONS |
I.S. EN ISO 4759-3:2016
|
TOLERANCES FOR FASTENERS - PART 3: WASHERS FOR BOLTS, SCREWS AND NUTS - PRODUCT GRADES A, C AND F (ISO 4759-3:2016) |
I.S. EN 1426:2015
|
BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
I.S. EN ISO 293:2005
|
PLASTICS - COMPRESSION MOULDING TEST SPECIMENS OF THERMOPLASTIC MATERIALS |
I.S. EN ISO 2692:2014
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR) (ISO 2692:2014) |
I.S. EN 12561-3:2011
|
RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE |
I.S. EN 10272:2016&LC:2016
|
STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
I.S. EN ISO 9409-1:2004
|
MANIPULATING INDUSTRIAL ROBOTS - MECHANICAL INTERFACES - PART 1: PLATES |
DIN EN 12890:2000-06
|
FOUNDING - PATTERNS, PATTERN EQUIPMENT AND CORE BOXES FOR THE PRODUCTION OF SAND MOULDS AND SAND CORES |
I.S. EN 1966:2009
|
STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD |
I.S. EN 12561-5:2011
|
RAILWAY APPLICATIONS - TANK WAGONS - PART 5: DEVICES FOR VAPOUR RETURN WHILE FILLING OR EMPTYING OF LIQUID PRODUCTS |
I.S. EN 10088-3:2014
|
STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
I.S. EN 12561-2:2011
|
RAILWAY APPLICATIONS - TANK WAGONS - PART 2: BOTTOM EMPTYING DEVICES FOR LIQUID PRODUCTS INCLUDING VAPOUR RETURN |
DIN EN 10088-3:2014-12
|
STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
I.S. EN 12561-6:2011
|
RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES |
I.S. EN 10277-1:2008
|
BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL |
DIN EN 10277-1:2008-06
|
BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL |
I.S. EN ISO 15848-1:2015
|
Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves (ISO 15848-1:2015) |
DIN EN ISO 9409-1:1997-06
|
MANIPULATING INDUSTRIAL ROBOTS - MECHANICAL INTERACES - PART 1: PLATES |
DIN EN ISO 9409-2:2003-10
|
MANIPULATING INDUSTRIAL ROBOTS - MECHANICAL INTERFACES - PART 2: SHAFTS |
BS 1916-3:2009
|
Limits and fits for engineering Guide to tolerances, limits and fits for large diameters |
BS 6101-3:1992
|
Machine tool ball screws Glossary of terms |
VDI/VDE/DGQ 2618 Blatt 4.4:2009-09
|
Inspection of measuring and test equipment - Test instruction for reference gauges with plane-parallel or spherical measuring faces and for spherical-end gauges and internal callipers |
VDI 3405 Blatt 2:2013-08
|
Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Qualification, quality assurance and post processing |
05/30070377 DC : DRAFT OCT 2005
|
ISO 10441 - PETROLEUM AND NATURAL GAS INDUSTRIES - FLEXIBLE COUPLINGS FOR MECHANICAL POWER TRANSMISSION - SPECIAL PURPOSE APPLICATIONS |
BS EN 62074-1:2014
|
Fibre optic interconnecting devices and passive components. Fibre optic WDM devices Generic specification |
DIN ISO 3601-2:2010-08
|
Fluid power systems - O-rings - Part 2: Housing dimensions for general applications (ISO 3601-2:2008) |
08/30184280 DC : DRAFT SEP 2008
|
BS EN 12561-3 - RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE |
09/30199223 DC : DRAFT JAN 2009
|
BS EN 60876-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC SPATIAL SWITCHES - PART 1: GENERIC SPECIFICATION |
BS ISO 16589-4:2011
|
Rotary shaft lip-type seals incorporating thermoplastic sealing elements Performance test procedures |
DIN EN ISO 8062-3 E : 2008
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS |
BS EN ISO 1938-2:2017
|
Geometrical product specifications (GPS). Dimensional measuring equipment Reference disk gauges |
08/30163745 DC : DRAFT SEP 2008
|
BS EN 12561-2 - RAILWAY APPLICATIONS - TANK WAGONS - PART 2: BOTTOM EMPTYING DEVICES FOR LIQUID PRODUCTS INCLUDING VAPOUR RETURN |
BS ISO 5692-2:2002
|
Agricultural vehicles. Mechanical connections on towed vehicles Coupling ring 40 with socket |
BS 4500-4:1985
|
ISO limits and fits Specification for system of cone (taper) fits for cones from C=1:3 to 1:500, lengths from 6 mm to 630 mm and diameters up to 500 mm |
BS ISO 7789:2007
|
Hydraulic fluid power. Two-, three- and four-port screw-in cartridge valves. Cavities |
BS ISO 20054:2016
|
Plain bearings. Bearings containing dispersed solid lubricants |
02/706400 DC : DRAFT MAY 2002
|
BS ISO 4156-1 - STRAIGHT CYLINDRICAL INVOLUTE SPLINES - METRIC MODULE, SIDE FIT - PART 1: GENERALITIES |
BS ISO 1132-1:2000
|
Rolling bearings. Tolerances Terms and definitions |
BS 4480-3:1979
|
Specification for plain bearings: metric series Dimensions and tolerances of solid copper alloy bushes |
BS EN 6072:2010
|
Aerospace series. Metallic materials. Test methods. Constant amplitude fatigue testing |
BS EN 61314-1:2012
|
Fibre optic interconnecting devices and passive components. Fibre optic fan-outs Generic specification |
I.S. EN ISO 898-6:1996
|
MECHANICAL PROPERTIES OF FASTENERS - PART 6: NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD |
BS EN 20898-6:1992
|
Mechanical properties of fasteners Nuts with specified proof load values. Fine pitch thread |
08/30191292 DC : DRAFT OCT 2008
|
BS EN 62077 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CIRCULATORS - GENERIC SPECIFICATION |
I.S. EN 15566:2016
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING |
BS EN 13236 : 2010
|
SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS |
UNE-ISO 6489-5:2016
|
Agricultural vehicles -- Mechanical connections between towed and towing vehicles -- Part 5: Specifications for non-swivel clevis couplings |
UNI EN 10088-5 : 2009
|
Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and cold-formed products of corrosion-resistant steel for use in construction |
14/30304019 DC : 0
|
BS ISO 5781 - HYDRAULIC FLUID POWER - PRESSURE-REDUCING VALVES, SEQUENCE VALVES, UNLOADING VALVES, THROTTLE VALVES AND CHECK VALVES - MOUNTING SURFACES |
BS EN 60852-4:1997
|
Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment Transformers and inductors using YUI-2 laminations |
07/30164787 DC : 0
|
EN 62134-1 - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION |
BS 4687:1984
|
Specification for extended pitch precision roller chains and chainwheels |
07/30164411 DC : 0
|
EN 61314-1 - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION |
06/30044269 DC : DRAFT MAR 2006
|
BS 8887-1 - DESIGN OUTPUT FOR MANUFACTURE, ASSEMBLY, DISASSEMBLY AND END-OF-LIFE PROCESSING (MADE) - PREPARATION, CONTENT AND STRUCTURE - PART 1: GENERAL CONCEPTS AND REQUIREMENTS |
04/30077768 DC : DRAFT FEB 2004
|
ISO 4401 - HYDRAULIC FLUID POWER - FOUR-PORT DIRECTIONAL CONTROL VALVES - MOUNTING SURFACES |
UNE-ISO 6489-2:2010
|
Agricultural vehicles -- Mechanical connections between towed and towing vehicles -- Part 2: Specifications for clevis coupling 40 |
BS EN 62496-1:2009
|
Optical circuit boards General |
BS EN 61169-1:2013
|
Radio-frequency connectors Generic specification. General requirements and measuring methods |
14/30297431 DC : 0
|
BS EN 60875-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - NON-WAVELENGTH-SELECTIVE FIBRE OPTIC BRANCHING DEVICES - PART 1: GENERIC SPECIFICATION |
04/30126747 DC : DRAFT DEC 2004
|
IEC 60874-1 ED.5 - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION |
DIN EN ISO 8062-3:2008-09
|
Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007) |
CEI EN 62099 : 2002
|
FIBRE OPTIC WAVELENGTH SWITCHES - GENERIC SPECIFICATION |
BS ISO 7790:2013
|
Hydraulic fluid power. Four-port modular stack valves and four-port directional control valves, sizes 02, 03, 05, 07, 08 and 10. Clamping dimensions |
EN 61202-1:2017
|
Fibre optic interconnecting devices and passive components - Fibre optic isolators - Part 1: Generic specification |
08/30191273 DC : DRAFT OCT 2008
|
BS EN 61977 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FILTERS - GENERIC SPECIFICATION |
BS ISO 4156-1:2005
|
Straight cylindrical involute splines. Metric module, side fit Generalities |
DIN EN ISO 14638 E : 2015
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015) |
BS ISO 6263:2013
|
Hydraulic fluid power. Compensated flow-control valves. Mounting surfaces |
BS ISO 3764:2016
|
Timekeeping instruments. Movements. Types, dimensions and nomenclature |
13/30288572 DC : 0
|
BS EN 10272 - STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
I.S. EN 60869-1:2013
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC PASSIVE POWER CONTROL DEVICES - PART 1: GENERIC SPECIFICATION (IEC 60869-1:2012 (EQV)) |
BIS IS 1757-1 : 2014
|
METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 1: TEST METHOD |
08/30169101 DC : 0
|
BS EN 61978-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC PASSIVE CHROMATIC DISPERSION COMPENSATORS - PART 1: GENERIC SPECIFICATION |
EN ISO 15245-1:2001/A1:2013
|
GAS CYLINDERS - PARALLEL THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATION (ISO 15245-1:2001/AMD 1:2013) |
12/30242874 DC : 0
|
BS ISO 1206:2001/AMD 1 - ROLLING BEARINGS - NEEDLE ROLLER BEARINGS, DIMENSION SERIES 48, 49 AND 69 - BOUNDARY DIMENSIONS AND TOLERANCES |
DIN 69051-3:1989-05
|
MACHINE TOOLS - BALL SCREWS - ACCEPTANCE CONDITIONS AND ACCEPTANCE TESTS |
BS ISO 16287:2005
|
Plain bearings. Thermoplastic bushes. Dimensions and tolerances |
I.S. EN 60874-1:2012
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION (IEC 60874-1:2011 (EQV)) |
09/30198179 DC : 0
|
BS EN ISO 17450-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS AND UNCERTAINTIES |
ISO 4639-3:1995
|
Rubber tubing and hoses for fuel circuits for internal-combustion engines Specification Part 3: Oxidized fuels |
BS ISO 10303-47:1997
|
Industrial automation systems and integration. Product data representation and exchange Integrated generic resource. Shape variation tolerances |
BS EN ISO 1179-2:2013
|
Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) |
09/30192800 DC : 0
|
BS ISO 29262 - PRODUCTION EQUIPMENT FOR MICROSYSTEMS - INTERFACE BETWEEN GRIPPERS AND HANDLING SYSTEM |
BS EN 60869-1:2013
|
Fibre optic interconnecting devices and passive components. Fibre optic passive power control devices Generic specification |
ISO 6621-1:2018
|
Internal combustion engines — Piston rings — Part 1: Vocabulary |
DIN 28006-1:2009-10
|
TOLERANCES AND LIMIT DEVIATIONS FOR AGITATOR VESSELS - PART 1: AGITATOR VESSELS OF METALLIC MATERIALS |
DIN ISO 3547-5:2015-12
|
PLAIN BEARINGS - WRAPPED BUSHES - PART 5: CHECKING THE OUTSIDE DIAMETER (ISO 3547-5:2007) |
BS ISO 1174-1:2011
|
Assembly tools for screws and nuts. Driving squares Driving squares for hand socket tools |
03/317167 DC : DRAFT OCT 2003
|
ISO 16287 - PLAIN BEARINGS - THERMOPLASTIC BUSHES - DIMENSIONS AND TOLERANCES |
BS EN ISO 17296-3:2016
|
Additive manufacturing. General principles Main characteristics and corresponding test methods |
16/30338711 DC : 0
|
BS IEC 60404-8-6 ED 3.0 - MAGNETIC MATERIALS - PART 8-6: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SOFT MAGNETIC METALLIC MATERIALS |
10/30234803 DC : 0
|
BS EN 61169-1 ED.2 - RADIO FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS |
07/30168153 DC : 0
|
BS EN 60875-1 - NON-WAVELENGTH-SELECTIVE FIBRE OPTIC BRANCHING DEVICES - PART 1: GENERIC SPECIFICATION |
UNI ISO 8434-6 : 2012
|
METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 6: 60 DEGREE CONE CONNECTORS WITH OR WITHOUT O-RING |
08/30189270 DC : 0
|
BS EN 13236 - SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS |
API 611 : 2008
|
GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
12/30235512 DC : 0
|
BS ISO 5145 - CYLINDER VALVE OUTLETS FOR GASES AND GAS MIXTURES - SELECTION AND DIMENSIONING |
09/30206090 DC : 0
|
BS EN 62496-4 - OPTICAL CIRCUIT BOARDS - INTERFACE STANDARDS - PART 4: GENERAL AND GUIDANCE |
BS EN 61269-1:1997
|
Fibre optic terminus sets Generic specification |
I.S. EN ISO 148-1:2016
|
METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 1: TEST METHOD (ISO 148-1:2016) |
UNI ISO 1174-1 : 2012
|
ASSEMBLY TOOLS FOR SCREWS AND NUTS - DRIVING SQUARES - PART 1: DRIVING SQUARES FOR HAND SOCKET TOOLS |
ABMA ISO 10285 : 2009
|
ROLLING BEARINGS - SLEEVE TYPE LINEAR BALL BEARINGS - BOUNDARY DIMENSIONS AND TOLERANCES |
UNE-ISO 3408-1:2011
|
Ball screws -- Part 1: Vocabulary and designation |
API STD 541 : 2014
|
FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER |
DD ISO/TS 13399-50:2007
|
Cutting tool data representation and exchange Reference dictionary for reference systems and common concepts |
BS ISO 1206 : 2001
|
ROLLING BEARINGS - NEEDLE ROLLER BEARINGS, DIMENSION SERIES 48, 49 AND 69 -BOUNDARY DIMENSIONS AND TOLERANCES |
ISO 4156-1:2005
|
Straight cylindrical involute splines Metric module, side fit Part 1: Generalities |
S.R. CEN ISO/TS 8062-2:2013
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013, CORRECTED VERSION 2013-11-01) |
NF EN 62077 : 2011
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CIRCULATORS - GENERIC SPECIFICATION |
UNI EN ISO 14405-2 : 2012
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES |
ISO 4156-3:2005
|
Straight cylindrical involute splines Metric module, side fit Part 3: Inspection |
ISO 8434-1:2007
|
Metallic tube connections for fluid power and general use Part 1: 24 degree cone connectors |
ISO 2795:2014
|
Plain bearings Sintered bushes Dimensions and tolerances |
I.S. EN 61978-1:2014
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC PASSIVE CHROMATIC DISPERSION COMPENSATORS - PART 1: GENERIC SPECIFICATION |
DIN EN 13236:2016-05
|
SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS |
XP ISO/TS 23768-1 : 2012 XP
|
ROLLING BEARINGS - PARTS LIBRARY - PART 1: REFERENCE DICTIONARY FOR ROLLING BEARINGS |
UNI EN ISO 8434-1 : 2007
|
METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
PREN 15566 : DRAFT 2013
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING |
ABMA ISO 199 : 2014
|
ROLLING BEARINGS - THRUST BEARINGS - GEOMETRICAL PRODUCT SPECIFICATION (GPS) AND TOLERANCE VALUES |
IEC 60404-8-10:2009
|
Magnetic materials - Part 8-10: Specifications for individual materials - Magnetic materials (iron and steel) for use in relays |
NF EN 62134-1 : 2010
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION |
ISO 10303-219:2007
|
Industrial automation systems and integration — Product data representation and exchange — Part 219: Application protocol: Dimensional inspection information exchange |
ISO 14368-3:2003
|
Mineral and sapphire watch-glasses Part 3: Qualitative criteria and test methods |
ISO 8434-6:2009
|
Metallic tube connections for fluid power and general use — Part 6: 60 degree cone connectors with or without O-ring |
IEC 61202-1:2016
|
Fibre optic interconnecting devices and passive components - Fibre optic isolators - Part 1: Generic specification |
I.S. CWA 14249:2003
|
REVISED FUNSTEP APPLICATION REFERENCE MODEL |
ISO 5781:2016
|
Hydraulic fluid power Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves Mounting surfaces |
ISO 14856:2001
|
Timekeeping instruments — Wristwatch-cases — Fixing dimensions of non-spring-bar types |
DIN EN ISO 15848-1:2015-11
|
INDUSTRIAL VALVES - MEASUREMENT, TEST AND QUALIFICATION PROCEDURES FOR FUGITIVE EMISSIONS - PART 1: CLASSIFICATION SYSTEM AND QUALIFICATION PROCEDURES FOR TYPE TESTING OF VALVES (ISO 15848-1:2015 + AMD.1:2017) |
DIN EN 1966:2009-07
|
STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD |
DIN EN 1426:2015-09
|
BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
DIN EN ISO 2692:2015-12
|
Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2014) |
DIN EN ISO 293 E : 2005
|
PLASTICS - COMPRESSION MOULDING TEST SPECIMENS OF THERMOPLASTIC MATERIALS |
ISO 5692-2:2002
|
Agricultural vehicles — Mechanical connections on towed vehicles — Part 2: Coupling ring 40 with socket |
UNE-EN 1426:2015
|
Bitumen and bituminous binders - Determination of needle penetration |
IEC 61169-1:2013
|
Radio frequency connectors - Part 1: Generic specification - General requirements and measuring methods |
BS EN ISO 14660-2:2000
|
Geometrical product specifications (GPS). Geometrical features Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature |
ISO 148-1:2016
|
Metallic materials — Charpy pendulum impact test — Part 1: Test method |
BS EN ISO 15245-1 : 2001
|
GAS CYLINDERS - PARALLEL THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATION |
UNE-EN 10088-3:2015
|
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
UNE-EN 12561-6:2012
|
Railway applications - Tank wagons - Part 6: Manholes |
IEC 61978-1:2014
|
Fibre optic interconnecting devices and passive components - Fibre optic passive chromatic dispersion compensators - Part 1: Generic specification |
ISO 14405-1:2016
|
Geometrical product specifications (GPS) — Dimensional tolerancing — Part 1: Linear sizes |
IEC 61977:2015
|
Fibre optic interconnecting devices and passive components - Fibre optic filters - Generic specification |
EN 61977:2015
|
Fibre optic interconnecting devices and passive components - Fibre optic filters - Generic specification |
UL 60320-1:2ED 2011-05
|
Appliances Couplers for Household and Similar General Purposes - Part 1: General Requirements |
EN ISO 4759-1 : 2000
|
TOLERANCES FOR FASTENERS - PART 1: BOLTS, SCREWS, STUDS AND NUTS - PRODUCT GRADES A, B AND C |
EN ISO 9409-2:2003
|
Manipulating industrial robots - Mechanical interfaces - Part 2: Shafts (ISO 9409-2:2002) |
EN ISO 9409-1:2004
|
Manipulating industrial robots - Mechanical interfaces - Part 1: Plates (ISO 9409-1:2004) |
EN ISO 14660-1:1999
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL FEATURES - PART 1: GENERAL TERMS AND DEFINITIONS |
EN ISO 293:2005
|
Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004) |
UNI EN 12561-4 : 2011
|
RAILWAY APPLICATIONS - TANK WAGONS - PART 4: DEVICES FOR TOP FILLING EMPTYING AND OF LIQUID PRODUCTS |
UNI EN 10088-3 : 2014
|
STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMIFINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
UNI EN 13236 : 2011
|
SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS |
BS 228:1984
|
Specification for short pitch transmission precision roller chains and chainwheels |
EN 12561-4:2011
|
Railway applications - Tank wagons - Part 4: Devices for top filling and emptying of liquid products |
UNI EN 12561-2 : 2011
|
RAILWAY APPLICATIONS - TANK WAGONS - PART 2: BOTTOM EMPTYING DEVICES FOR LIQUID PRODUCTS INCLUDING VAPOUR RETURN |
UNI EN 12561-5 : 2011
|
RAILWAY APPLICATIONS - TANK WAGONS - PART 5: DEVICES FOR VAPOUR RETURN WHILE FILLING OR EMPTYING OF LIQUID PRODUCTS |
UNI EN 12561-6 : 2011
|
RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES |
UNI EN 12561-3 : 2011
|
RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE |
UNI EN 1966 : 2009
|
STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD |
ISO 10303-238:2007
|
Industrial automation systems and integration Product data representation and exchange Part 238: Application protocol: Application interpreted model for computerized numerical controllers |
ISO 6263:2013
|
Hydraulic fluid power — Compensated flow-control valves — Mounting surfaces |
DIN EN ISO 14405-1:2017-07
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 1: LINEAR SIZES (ISO 14405-1:2016) |
ISO/TS 3669-2:2007
|
Vacuum technology Bakable flanges Part 2: Dimensions of knife-edge flanges |
I.S. EN ISO 8434-1:2007
|
METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
DIN ISO 8489-5 E : 1997
|
TEXTILE MACHINERY AND ACCESSORIES - CONES FOR CROSS WINDING - PART 5: DIMENSIONS, TOLERANCES AND DESIGNATION OF CONES WITH A HALF ANGLE OF 5 DEGREES 57 MINUTES |
BS QC 480000(1995) : 1995
|
CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C. LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS - PART 1: GENERIC SPECIFICATION |
16/30341970 DC : 0
|
BS ISO 1206 - ROLLING BEARINGS - NEEDLE ROLLER BEARINGS WITH MACHINED RINGS - BOUNDARY DIMENSIONS, GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES |
99/702254 DC : DRAFT JAN 1999
|
ISO/DIS 7465 - PASSENGER LIFTS AND SERVICE LIFTS - GUIDE RAILS FOR LIFTS AND COUNTERWEIGHTS - T-TYPE |
PREN 13236 : DRAFT 2017
|
SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS |
03/301350 DC : DRAFT JAN 2003
|
ISO 5744 - PLIERS AND NIPPERS - METHODS OF TEST |
ISO 1174-2:1996
|
Assembly tools for screws and nuts Driving squares Part 2: Driving squares for power socket tools |
15/30296029 DC : 0
|
BS ISO 4955 - HEAT-RESISTANT STEELS |
15/30321721 DC : DRAFT MAY 2015
|
BS ISO 6621-1 - INTERNAL COMBUSTION ENGINES - PISTON RINGS - PART 1: VOCABULARY |
01/712196 DC : DRAFT SEP 2001
|
ISO 5145 - CYLINDER VALVE OUTLETS FOR GASES AND GAS MIXTURES - SELECTION AND DIMENSIONING |
DD ISO/TS 23768-1:2011
|
Rolling bearings. Parts library Reference dictionary for rolling bearings |
05/30135789 DC : DRAFT JUL 2005
|
EN ISO 8434-1 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREES CONE CONNECTORS |
04/300984 DC : DRAFT JAN 2004
|
BS ISO 4955 - HEAT-RESISTING STEELS |
ISO 16589-4:2011
|
Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 4: Performance test procedures |
06/30145636 DC : DRAFT JULY 2006
|
ISO 3547-5 - PLAIN BEARINGS - WRAPPED BUSHES - PART 5: CHECKING THE OUTSIDE DIAMETER |
BS 2547-6:1978
|
Specification for basic dimensions of cones and tubes for winding textile yarns Transfer cones. Half angle of the cone 4°20\' |
BIS IS 800 : 2007 AMD 1 2012
|
GENERAL CONSTRUCTION IN STEEL - CODE OF PRACTICE |
BS EN 61274-1:2012
|
Fibre optic interconnecting devices and passive components. Adaptors for fibre optic connectors Generic specification |
DIN EN ISO 14638:2015-12
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015) |
BS ISO 16143-2:2014
|
Stainless steels for general purposes Corrosion-resistant semi-finished products, bars, rods and sections |
UNI CEN ISO/TS 8062-2 : 2013
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES |
BS ISO/TR 10064-4:1998
|
Code of inspection practice Recommendations relative to surface texture and tooth contact pattern checking |
14/30257552 DC : 0
|
BS ISO 3245 - ROLLING BEARINGS - NEEDLE ROLLER BEARINGS, DRAWN CUP WITHOUT INNER RING - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS), BOUNDARY DIMENSIONS AND TOLERANCES |
ISO/TR 18569:2004
|
Safety of machinery Guidelines for the understanding and use of safety of machinery standards |
BIS IS/IEC 60320-1 : 2001
|
APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 1: GENERAL REQUIREMENTS |
ISO 29262:2011
|
Production equipment for microsystems Interface between end effector and handling system |
BS ISO 8434-6:2009
|
Metallic tube connections for fluid power and general use 60° cone connectors with or without O-ring |
05/30107533 DC : DRAFT JUL 2005
|
ISO 10303-224 - INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - PART 224: APPLICATION PROTOCOL - MECHANICAL PRODUCT DEFINITION FOR PROCESS PLANNING USING MACHINING FEATURES |
BS ISO 14856:2001
|
Timekeeping instruments. Wristwatch cases. Fixing dimensions of non-spring-bar types |
BS EN ISO 14638:2015
|
Geometrical product specifications (GPS). Matrix model |
BS ISO 8135:1999
|
Hydraulic fluid power. Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series. Tolerances |
CEI EN 61274-1 : 2012
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - ADAPTORS FOR FIBRE OPTIC CONNECTORS - PART 1: GENERIC SPECIFICATION |
BS 5681:1979
|
Specification for taper pins, unhardened - metric series |
07/30162389 DC : 0
|
BS EN 62496-1 - OPTICAL CIRCUIT BOARDS - PART 1: GENERAL STANDARD |
UNI EN ISO 286-2 : 2010
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS |
12/30259951 DC : 0
|
BS EN 62074-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC WDM DEVICES - PART 1: GENERIC SPECIFICATION |
PD ISO/TR 17209:2013
|
Hydraulic fluid power. Two-, three-and four-port screw-in cartridge valves. Cavities with ISO 725 (UN and UNF) threads |
CEI EN 61202-1 : 2010
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC ISOLATORS - PART 1: GENERIC SPECIFICATION |
17/30359229 DC : DRAFT SEP 2017
|
BS EN 13236 - SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS |
11/30254168 DC : 0
|
BS EN 10088-3 - STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
DIN ISO 22917:2005-10
|
PRECISION SUPERABRASIVES - LIMIT DEVIATIONS AND RUN-OUT TOLERANCES FOR GRINDING WHEELS WITH DIAMOND OR CUBIC BORON NITRIDE (ISO 22917:2016) |
DD ISO/TS 17450-2:2002
|
Geometrical product specifications (GPS). General concepts Basic tenets, specifications,operators and uncertainties |
DIN EN ISO 1179-2:2014-03
|
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2013) |
13/30241415 DC : 0
|
BS EN 15566 - RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING |
DIN EN 10088-5:2009-07
|
STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
17/30332783 DC : 0
|
BS ISO 5145 - GAS CYLINDERS - CYLINDER VALVE OUTLETS FOR GASES AND GAS MIXTURES - SELECTION AND DIMENSIONING |
BS EN 60320-3:2014
|
Appliance couplers for household and similar general purposes Standard sheets and gauges |
06/30154588 DC : DRAFT AUG 2006
|
ISO 6621-1 - INTERNAL COMBUSTION ENGINES - PISTON RINGS - PART 1: VOCABULARY |
BS ISO 6264:1998
|
Hydraulic fluid power. Pressure-relief valves. Mounting surfaces |
BS EN 62496-4:2011
|
Optical circuit boards Interface standards. General and guidance |
12/30249003 DC : 0
|
BS ISO 3764 - TIMEKEEPING INSTRUMENTS - MOVEMENTS - TYPES, DIMENSIONS AND NOMENCLATURE |
BS ISO 492:2014
|
Rolling bearings. Radial bearings. Geometrical product specifications (GPS) and tolerance values |
03/313750 DC : DRAFT AUG 2003
|
BS ISO 148-1 - METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 1: TEST METHOD |
ISO 4639-2:1995
|
Rubber tubing and hoses for fuel circuits for internal-combustion engines Specification Part 2: Oxygenated fuels |
BS ISO 6489-2:2002
|
Agricultural vehicles. Mechanical connections between towed and towing vehicles Specifications for clevis coupling 40 |
I.S. EN 60404-8-6:2017
|
MAGNETIC MATERIALS - PART 8-6: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SOFT MAGNETIC METALLIC MATERIALS |
08/30174656 DC : DRAFT SEP 2008
|
BS EN 61202-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC ISOLATORS - PART 1: GENERIC SPECIFICATION |
08/30184522 DC : DRAFT JUNE 2008
|
BS ISO 2129 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INDICATION OF DIMENSIONS AND TOLERANCES - MECHANICAL ENGINEERING DRAWINGS |
BS ISO 6195:2013
|
Fluid power systems and components. Cylinder-rod wiper-ring housings in reciprocating applications. Dimensions and tolerances |
BS EN 60404-8-6:2017
|
Magnetic materials Specifications for individual materials. Soft magnetic metallic materials |
PREN 2003-2 : 200P1
|
AEROSPACE SERIES - STEELS - TEST METHODS - PART 2: IZOD IMPACT TEST |
DIN ISO 8489-3 E : 1997
|
TEXTILE MACHINERY AND ACCESSORIES - CONES FOR CROSS WINDING - PART 3: DIMENSIONS, TOLERANCES AND DESIGNATION OF CONES WITH A HALF ANGLE OF 4 DEGREES 20 MINUTES |
I.S. EN 61797-1:1998
|
TRANSFORMERS AND INDUCTORS FOR USE IN TELECOMMUNICATION AND ELECTRONIC EQUIPMENT - MAIN DIMENSIONS OF COIL FORMERS - PART 1: COIL FORMERS FOR LAMINATED CORES |
ISO 6489-2:2002
|
Agricultural vehicles — Mechanical connections between towed and towing vehicles — Part 2: Specifications for clevis coupling 40 |
ISO 13074:2012
|
Analogue quartz clocks — Fitting dimensions of movements to hands |
17/30346164 DC : 0
|
BS ISO 20457 - PLASTICS MOULDED PARTS - TOLERANCES AND ACCEPTANCE CONDITIONS |
API 546 : 2008
|
BRUSHLESS SYNCHRONOUS MACHINES - 500 KVA AND LARGER |
SAE J 1946 : 2007(S2016)
|
COMPANION FLANGES, TYPE A (EXTERNAL PILOT) AND TYPE S (INTERNAL PILOT) |
CEI EN 61076-1 : 2007
|
CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 1: GENERIC SPECIFICATION |
I.S. EN 28167:1993
|
PROJECTIONS FOR RESISTANCE WELDING |
I.S. EN 3238:2010
|
AEROSPACE SERIES - METALLIC MATERIALS - TEST METHOD - SHEAR TEST FOR WIRES AND RIVETS |
I.S. EN 50033:1992
|
ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - CAPLIGHTS FOR MINES SUSCEPTIBLE TO FIREDAMP |
ISO 5252:1991
|
Steel tubes — Tolerance systems |
DIN ISO 10285 E : 2009
|
ROLLING BEARINGS - SLEEVE TYPE LINEAR BALL BEARINGS - BOUNDARY DIMENSIONS AND TOLERANCES |
DIN EN ISO 8434-1:2016-10 (Draft)
|
METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
NF EN 3238 : 2011
|
AEROSPACE SERIES - METALLIC MATERIALS - TEST METHOD - SHEAR TEST FOR WIRES AND RIVETS |
NF ISO 6489-5 : 2011
|
AGRICULTURAL VEHICLES - MECHANICAL CONNECTIONS BETWEEN TOWED AND TOWING VEHICLES - PART 5: SPECIFICATIONS FOR NON-SWIVEL CLEVIS COUPLINGS |
ISO 14368-2:2003
|
Mineral and sapphire watch-glasses — Part 2: Assembly to the case by adhesive or using a gasket |
I.S. EN ISO 8062-3:2007
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS |
ISO 12307-1:1994
|
Plain bearings — Wrapped bushes — Part 1: Checking the outside diameter |
ISO 199:2014
|
Rolling bearings — Thrust bearings — Geometrical product specification (GPS) and tolerance values |
DIN EN ISO 286-2:2010-11
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS |
I.S. EN 61076-1:2006&A1:2019
|
CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 1: GENERIC SPECIFICATION |
ISO 5408:2009
|
Screw threads Vocabulary |
ISO 129-1:2018
|
Technical product documentation (TPD) — Presentation of dimensions and tolerances — Part 1: General principles |
UNI ISO 129-1 : 2011
|
TECHNICAL DRAWINGS - INDICATION OF DIMENSIONS AND TOLERANCES - PART 1: GENERAL PRINCIPLES |
OVE/ONORM EN 62077 : 2011
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CIRCULATORS - GENERIC SPECIFICATION |
I.S. EN 61243-3:2014
|
LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE |
CEI EN 60874-1 : 2012
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION |
ISO 14405-2:2011
|
Geometrical product specifications (GPS) Dimensional tolerancing Part 2: Dimensions other than linear sizes |
PREN ISO 2692 : DRAFT 2012
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR) (ISO/DIS 2692:2012) |
UNE-EN ISO 1179-2:2014
|
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2013) |
ISO 14368-1:2000
|
Mineral and sapphire watch-glasses — Part 1: Dimensions and tolerances |
ISO 286-2:2010
|
Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts |
ISO/TR 10064-3:1996
|
Code of inspection practice Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes |
I.S. EN 61243-1:2005
|
LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C. |
ISO 16143-2:2014
|
Stainless steels for general purposes Part 2: Corrosion-resistant semi-finished products, bars, rods and sections |
EN 13236:2010+A1:2015
|
Safety requirements for superabrasive products |
EN ISO 8434-1:2007/AC:2009
|
METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
ISO 7790:2013
|
Hydraulic fluid power — Four-port modular stack valves and four-port directional control valves, sizes 02, 03, 05, 07, 08 and 10 — Clamping dimensions |
I.S. EN 61020-1:2009
|
ELECTROMECHANICAL SWITCHES FOR USE IN ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
IEC 62134-1:2009
|
Fibre optic interconnecting devices and passive components - Fibre optic closures - Part 1: Generic specification |
ISO 683-15:1992
|
Heat-treatable steels, alloy steels and free-cutting steels — Part 15: Valve steels for internal combustion engines |
I.S. EN 61169-1:2013
|
RADIO-FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS |
ISO 16873:2011
|
Hydraulic fluid power — Pressure switches — Mounting surfaces |
I.S. EN 175500:1998
|
CABLE OUTLET ACCESSORIES FOR CONNECTORS, INCLUDING QUALIFICATION APPROVAL AND CAPABILITY APPROVAL (SECTIONAL SPECIFICATION) |
IEC 62077:2015
|
Fibre optic interconnecting devices and passive components - Fibre optic circulators - Generic specification |
EN 61169-1:2013/AC:2016-02
|
RADIO-FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS (IEC 61169-1:2013) |
DIN EN 10272:2016-10
|
STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
BS EN 12561-3:2011
|
Railway applications. Tank wagons Bottom filling and emptying devices for gases liquefied under pressure |
UNE-EN ISO 4759-3:2017
|
Tolerances for fasteners - Part 3: Washers for bolts, screws and nuts - Product grades A, C and F (ISO 4759-3:2016) |
IEC 60876-1:2014
|
Fibre optic interconnecting devices and passive components - Fibre optic spatial switches - Part 1: Generic specification |
IEC 60869-1:2012
|
Fibre optic interconnecting devices and passive components - Fibre optic passive power control devices - Part 1: Generic specification |
IEC 61797-1:1996
|
Transformers and inductors for use in telecommunication and electronic equipment - Main dimensions of coil formers - Part 1: Coil formers for laminated cores |
ISO 2692:2014
|
Geometrical product specifications (GPS) Geometrical tolerancing Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) |
ISO 128-1:2003
|
Technical drawings General principles of presentation Part 1: Introduction and index |
BS EN 12561-2:2011
|
Railway applications. Tank wagons Bottom emptying devices for liquid products including vapour return |
BS EN ISO 15848-1 : 2015
|
INDUSTRIAL VALVES - MEASUREMENT, TEST AND QUALIFICATION PROCEDURES FOR FUGITIVE EMISSIONS - PART 1: CLASSIFICATION SYSTEM AND QUALIFICATION PROCEDURES FOR TYPE TESTING OF VALVES (ISO 15848-1:2015) |
IEC 60874-1:2011
|
Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic specification |
UNE-EN 12561-2:2012
|
Railway applications - Tank wagons - Part 2: Bottom emptying devices for liquid products including vapour return |
IEC 61314-1:2011
|
Fibre optic interconnecting devices and passive components - Fibre optic fan-outs - Part 1: Generic specification |
ISO 17450-2:2012
|
Geometrical product specifications (GPS) — General concepts — Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities |
IEC 60852-4:1996
|
Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 4: Transformers and inductors using YUI-2 laminations |
BS EN ISO 6284:1999
|
Construction drawings. Indication of limit deviations |
UNE-EN 12561-3:2012
|
Railway applications - Tank wagons - Part 3: Bottom filling and emptying devices for gases liquefied under pressure |
IEC 61020-1:2009
|
Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification |
BS EN 10088-3:2014
|
Stainless steels Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
ISO 293:2004
|
Plastics — Compression moulding of test specimens of thermoplastic materials |
IEC 60875-1:2015
|
Fibre optic interconnecting devices and passive components - Non-wavelength-selective fibre optic branching devices - Part 1: Generic specification |
ISO 1938-1:2015
|
Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Plain limit gauges of linear size |
ISO 6284:1996
|
Construction drawings — Indication of limit deviations |
IEC 60404-8-6:2016
|
Magnetic materials - Part 8-6: Specifications for individual materials - Soft magnetic metallic materials |
BS EN 28167:1992
|
Specification for projections for resistance welding |
ISO 9409-2:2002
|
Manipulating industrial robots Mechanical interfaces Part 2: Shafts |
IEC 61274-1:2011
|
Fibre optic interconnecting devices and passive components - Adaptors for fibre optic connectors - Part 1: Generic specification |
ISO 14660-2:1999
|
Geometrical Product Specifications (GPS) Geometrical features Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature |
ISO 14638:2015
|
Geometrical product specifications (GPS) Matrix model |
IEC 61243-3:2014
|
Live working - Voltage detectors - Part 3: Two-pole low-voltage type |
IEC 62496-1:2008
|
Optical circuit boards - Part 1: General |
IEC 62099:2001
|
Fibre optic wavelength switches - Generic specification |
ISO 15245-1:2001
|
Gas cylinders Parallel threads for connection of valves to gas cylinders Part 1: Specification |
BS EN ISO 14660-1:2000
|
Geometrical product specifications (GPS). Geometrical features General terms and definitions |
IEC 62074-1:2014
|
Fibre optic interconnecting devices and passive components - Fibre optic WDM devices - Part 1: Generic specification |
BS EN ISO 293 : 2005
|
PLASTICS - COMPRESSION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS |
BS EN 12561-4:2011
|
Railway applications. Tank wagons Devices for top filling and emptying of liquid products |
ISO 1132-1:2000
|
Rolling bearings — Tolerances — Part 1: Terms and definitions |
ISO 9409-1:2004
|
Manipulating industrial robots — Mechanical interfaces — Part 1: Plates |
BS EN 1426:2015
|
Bitumen and bituminous binders. Determination of needle penetration |
BS EN 25822:1992
|
Spot welding equipment. Taper plug gauges and taper ring gauges |
BS EN 1966:2009
|
Structural adhesives. Characterization of a surface by measuring adhesion by means of the three point bending method |
ISO 17296-3:2014
|
Additive manufacturing — General principles — Part 3: Main characteristics and corresponding test methods |
ISO 14660-1:1999
|
Geometrical Product Specifications (GPS) Geometrical features Part 1: General terms and definitions |
IEC 60740-1:2005
|
Laminations for transformers and inductors - Part 1: Mechanical and electrical characteristics |
ISO 4759-1:2000
|
Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C |
IEC 61076-1:2006
|
Connectors for electronic equipment - Product requirements - Part 1: Generic specification |
ISO 4759-3:2016
|
Tolerances for fasteners Part 3: Washers for bolts, screws and nuts Product grades A, C and F |
UNE-EN ISO 15848-1:2015
|
Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves (ISO 15848-1:2015) |
UNE-EN 61243-3:2015
|
Live working - Voltage detectors - Part 3: Two-pole low-voltage type |
EN 20898-6 : 1992
|
MECHANICAL PROPERTIES OF FASTENERS - NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD |
EN ISO 4759-3:2016
|
Tolerances for fasteners - Part 3: Washers for bolts, screws and nuts - Product grades A, C and F (ISO 4759-3:2016) |
EN ISO 1179-2:2013
|
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2013) |
UNI EN 10277-1 : 2008
|
BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL |
EN 25822:1991
|
Spot welding equipment - Taper plug gauges and taper ring gauges (ISO 5822:1988) |
EN 6072:2010
|
Aerospace series - Metallic materials - Test methods - Constant amplitude fatigue testing |
EN ISO 17296-3:2016
|
Additive manufacturing - General principles - Part 3: Main characteristics and corresponding test methods (ISO 17296-3:2014) |
EN 12561-2:2011
|
Railway applications - Tank wagons - Part 2: Bottom emptying devices for liquid products including vapour return |
EN 15566:2016
|
Railway applications - Railway rolling stock - Draw gear and screw coupling |
EN ISO 6284:1999
|
Construction drawings - Indication of limit deviations (ISO 6284:1996) |
EN ISO 8062-3 : 2007 COR 2009
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS |
EN 3238 : 2010
|
AEROSPACE SERIES - METALLIC MATERIALS - TEST METHOD - SHEAR TEST FOR WIRES AND RIVETS |
EN ISO 17450-2:2012
|
Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012) |
EN ISO 286-2:2010/AC:2013
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS (ISO 286-2:2010/COR 1:2013) |
EN ISO 14660-2 : 1999
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL FEATURES - PART 2: EXTRACTED MEDIAN LINE OF A CYLINDER AND A CONE, EXTRACTED MEDIAN SURFACE, LOCAL SIZE OF AN EXTRACTED FEATURE |
EN ISO 1938-1:2015
|
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015) |
EN ISO 1938-2:2017
|
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017) |
EN ISO 14405-1:2016
|
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2016) |
EN ISO 898-6 : 1995
|
MECHANICAL PROPERTIES OF FASTENERS - PART 6: NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD |
EN 1966:2009
|
Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method |
DIN ISO 8489-2 E : 1997
|
TEXTILE MACHINERY AND ACCESSORIES - CONES FOR CROSS WINDING - PART 2: DIMENSIONS, TOLERANCES AND DESIGNATION OF CONES WITH HALF ANGLE OF 3 DEGREES 30 MINUTES |
DIN EN ISO 1938-2 E : 2017
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017) |
BS ISO 12301:2007
|
Plain bearings. Quality control techniques and inspection of geometrical and material quality characteristics |
BS ISO 5781:2000
|
Hydraulic fluid power. Pressure reducing valves, sequence valves, unloading valves, throttle valves and check valves. Mounting surfaces |
DIN EN ISO 1938-1:2016-03
|
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015) |
DIN ISO 29262 E : 2013
|
PRODUCTION EQUIPMENT FOR MICROSYSTEMS - INTERFACE BETWEEN END EFFECTOR AND HANDLING SYSTEM (ISO 29262:2011) |
BS EN 62134-1:2009
|
Fibre optic interconnecting devices and passive components. Fibre optic closures Generic specification |
16/30353588 DC : 0
|
BS EN 61020-1 ED 3.0 - ELECTROMECHANICAL SWITCHES FOR USE IN ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
BS EN 60740-1:2005
|
Laminations for transformers and inductors Mechanical and electrical characteristics |
16/30335541 DC : 0
|
BS ISO 3548-2 - PLAIN BEARINGS - THIN-WALLED HALF BEARINGS WITH OR WITHOUT FLANGE - PART 2: MEASUREMENT OF WALL THICKNESS AND FLANGE THICKNESS |
UNE-EN 15566:2017
|
Railway applications - Railway rolling stock - Draw gear and screw coupling |
BS 6404-8.10:1995
|
Magnetic materials. Individual materials Specification for magnetic materials (iron and steel) for use in relays |
DIN EN ISO 1938-2:2017-05
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017) |
11/30237803 DC : 0
|
BS ISO 7790 - HYDRAULIC FLUID POWER - FOUR-PORT MODULAR STACK VALVES AND FOUR-PORT DIRECTIONAL CONTROL VALVES, SIZES 02, 03, 05, 07, 08 AND 10 - CLAMPING DIMENSIONS |
14/30280974 DC : 0
|
BS EN ISO 4759-3 - TOLERANCES FOR FASTENERS - PART 3: WASHERS FOR BOLTS, SCREWS AND NUTS - PRODUCT GRADES A, C AND F |
11/30196431 DC : 0
|
BS ISO 13074 - ANALOGUE QUARTZ CLOCKS - FITTING DIMENSIONS OF MOVEMENTS TO HANDS |
ISO/TS 17450-2:2002
|
Geometrical product specifications (GPS) General concepts Part 2: Basic tenets, specifications, operators and uncertainties |
ISO 10552:2014
|
Timekeeping instruments Crowns and sealed tubes Designs and dimensions |
08/30180235 DC : DRAFT MAR 2008
|
BS ISO 5408 - SCREW THREADS - VOCABULARY |
BS EN 61020-1:2009
|
Electromechanical switches for use in electrical and electronic equipment Generic specification |
BS ISO 19259:2015
|
Plain bearings. Bearings with embedded solid lubricants |
UNE-EN 61020-1:2011
|
Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification |
11/30231340 DC : 0
|
BS EN ISO 1938-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: PLAIN LIMIT GAUGES OF LINEAR SIZE |
BS ISO 3408-1:2006
|
Ball screws Vocabulary and designation |
PREN 10088-3 : DRAFT 2011
|
STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
10/30218225 DC : 0
|
BS EN 60874-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION |
DD ISO/TS 3669-2:2007
|
Vacuum technology. Bakable flanges Dimensions of knife-edge flanges |
BS EN ISO 1938-1:2015
|
Geometrical product specifications (GPS). Dimensional measuring equipment Plain limit gauges of linear size |
DIN EN 50347:2003-09
|
GENERAL PURPOSE THREE-PHASE INDUCTION MOTORS HAVING STANDARD DIMENSIONS AND OUTPUTS - FRAME NUMBERS 56 TO 315 AND FLANGE NUMBERS 65 TO 740 |
DIN EN ISO 17450-2:2013-04
|
Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012) |
IEC 63032:2018
|
Fibre optic interconnecting devices and passive components - Fibre optic tuneable bandpass filters - Generic specification |
BS ISO 16873:2011
|
Hydraulic fluid power. Pressure switches. Mounting surfaces |
12/30258651 DC : 0
|
BS ISO 492 - ROLLING BEARINGS - RADIAL BEARINGS - DIMENSIONAL AND GEOMETRICAL TOLERANCES |
ISO 22917:2016
|
Precision superabrasives Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride |
API 611 REDLINE : 2008
|
GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
BS EN 61073-1:2009
|
Fibre optic interconnecting devices and Passive components. Mechanical splices and fusion splice protectors for optical fibres and cables Generic specification |
10/30218213 DC : 0
|
BS EN 61274-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - ADAPTORS FOR FIBRE OPTIC CONNECTORS - PART 1: GENERIC SPECIFICATION |
BS 5983-5:1982
|
Metric spherical plain bearings Specification for dimensions and tolerances of spherical plain bearing rod ends, dimension series E and JK |
01/715452 DC : DRAFT NOV 2001
|
PREN 10088-3 - STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL AND CONSTRUCTION PURPOSES |
10/30200334 DC : 0
|
BS ISO 129-1 - TECHNICAL DRAWINGS - INDICATION OF DIMENSIONS AND TOLERANCES - PART 1: GENERAL PRINCIPLES |
I.S. EN 6072:2010
|
AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - CONSTANT AMPLITUDE FATIGUE TESTING |
BS ISO 13942:2000
|
Bonded abrasive products. Limit deviations and run-out tolerances |
DIN ISO 8489-4 E : 1997
|
TEXTILE MACHINERY AND ACCESSORIES - CONES FOR CROSS WINDING - PART 4: DIMENSIONS, TOLERANCES AND DESIGNATION OF CONES WITH A HALF ANGLE 4 DEGREES 20 MINUTES FOR WINDING FOR DYEING PURPOSES |
10/30234324 DC : DRAFT DEC 2010
|
BS EN 12561-4 - RAILWAY APPLICATIONS - TANK WAGONS - PART 4: DEVICES FOR TOP FILLING AND EMPTYING OF LIQUID PRODUCTS |
ISO 19259:2015
|
Plain bearings Bearings with embedded solid lubricants |
04/30125936 DC : DRAFT NOV 2004
|
ISO 10135 - TECHNICAL PRODUCT DOCUMENTATION (TPD) - DRAWING INDICATIONS FOR MOULDED PARTS |
12/30274628 DC : 0
|
BS EN 60320-3 - APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 3: STANDARD SHEETS AND GAUGES |
13/30274174 DC : 0
|
BS ISO 8133 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR ACCESSORIES FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) COMPACT SERIES |
BS EN 61977:2015
|
Fibre optic interconnecting devices and passive components. Fibre optic filters. Generic specification |
BS ISO TR 10064-3:1996
|
Code of inspection practice Recommendations relative to gear blanks, shaft centre distance and parallelism of axes |
07/30172547 DC : 0
|
BS EN 62074-1 - FIBRE OPTIC WDM DEVICES - PART 1: GENERIC SPECIFICATION |
07/30168042 DC : 0
|
BS ISO 26622-1 - MODULAR TAPER INTERFACE WITH BALL TRACK SYSTEM - PART 1: DIMENSIONS AND DESIGNATION OF SHANKS |
10/30234321 DC : DRAFT DEC 2010
|
BS EN 12561-3 - RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE |
91/78933 DC : DRAFT AUG 1991
|
ISO/DIS 1938-3 - INSPECTION OF PLAIN WORKPIECES - PART 3: GUIDELINES FOR INSPECTION USING WORKSHOP MEASURING INSTRUMENTS |
04/30125584 DC : DRAFT NOV 2004
|
IEC 61274-1 ED 2 - ADAPTORS FOR OPTICAL FIBRES AND CABLES - PART 2: GENERIC SPECIFICATION |
BS ISO 199:2014
|
Rolling bearings. Thrust bearings. Geometrical product specification (GPS) and tolerance values |
BS ISO 4401:2005
|
Hydraulic fluid power. Four-port directional control valves. Mounting surfaces |
BS 1836-1:1982
|
Flyer bobbins Specification for dimensions of plastics flyer bobbins for speed frames |
BS ISO 3245:2015
|
Rolling bearings. Needle roller bearings with drawn cup and without inner ring. Boundary dimensions, geometrical product specifications (GPS) and tolerance values |
API 611 : 2008 : R2014
|
GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
BS EN 62077:2016
|
Fibre optic interconnecting devices and passive components. Fibre optic circulators. Generic specification |
BS EN 60874-1:2012
|
Fibre optic interconnecting devices and passive components. Connectors for optical fibres and cables Generic specification |
ISO 20054:2016
|
Plain bearings Bearings containing dispersed solid lubricants |
CEI EN 62496-4 : 2012
|
OPTICAL CIRCUIT BOARDS - PART 4: INTERFACE STANDARDS - GENERAL AND GUIDANCE |
DIN CEN ISO/TS 8062-2;DIN SPEC 91184:2014-03
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013) |
DIN 406-10:1992-12
|
TECHNICAL DRAWINGS; DIMENSIONING; DEFINITIONS, GENERAL PRINCIPLES |
DIN ISO 3408-1:2011-04
|
Ball screws - Part 1: Vocabulary and designation (ISO 3408-1:2006) |
ISO 3466:2016
|
Machine taper pin reamers with parallel shanks |
I.S. EN ISO 1938-1:2015
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: PLAIN LIMIT GAUGES OF LINEAR SIZE (ISO 1938-1:2015) |
I.S. EN 60876-1:2014
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC SPATIAL SWITCHES - PART 1: GENERIC SPECIFICATION |
I.S. 231:1979
|
ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS |
CEI EN 62134-1 : 2011
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION |
UNE-ISO 5692-2:2010
|
Agricultural vehicles -- Mechanical connections on towed vehicles -- Part 2: Coupling ring 40 with socket |
I.S. EN 61274-1:2012
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - ADAPTORS FOR FIBRE OPTIC CONNECTORS - PART 1: GENERIC SPECIFICATION (IEC 61274-1:2011 (EQV)) |
I.S. EN 60320-3:2014
|
APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 3: STANDARD SHEETS AND GAUGES |
I.S. EN 50109-2-4:1997
|
HAND CRIMPING TOOLS - TOOLS FOR THE CRIMP TERMINATION OF ELECTRIC CABLES AND WIRES FOR LOW FREQUENCY AND RADIO FREQUENCY APPLICATIONS - PART 2-4: PARTICULAR REQUIREMENTS FOR CENTRE CONTACTS OF RF CONNECTORS, SERIES SMZ |
BS 4480-9:1995
|
Plain bearings: metric series Checking the outside diameter of wrapped bushes |
NFPA T3.5.50 : 2009 : R2014
|
HYDRAULIC FLUID POWER - TWO-, THREE-, AND FOUR-PORT SCREW-IN CARTRIDGE VALVES - CAVITIES WITH UN AND UNF THREADS |
NFPA T3.5.50 : 2009
|
HYDRAULIC FLUID POWER - TWO-, THREE-, AND FOUR-PORT SCREW-IN CARTRIDGE VALVES - CAVITIES WITH UN AND UNF THREADS |
BS ISO 6489-5:2011
|
Agricultural vehicles. Mechanical connections between towed and towing vehicles Specifications for non-swivel clevis couplings |
UNI EN ISO 1179-2 : 2013
|
CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E) |
NF EN ISO 14405-2 : 2012
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES |
NF EN 10088-5 : 2009
|
STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
NF ISO 5408 : 2009
|
SCREW THREADS - VOCABULARY |
UNE-EN ISO 17296-3:2017
|
Additive manufacturing - General principles - Part 3: Main characteristics and corresponding test methods (ISO 17296-3:2014) |
ISO 3547-5:2007
|
Plain bearings Wrapped bushes Part 5: Checking the outside diameter |
I.S. EN 13236:2010
|
SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS |
ISO 1206:2018
|
Rolling bearings — Needle roller bearings with machined rings — Boundary dimensions, geometrical product specifications (GPS) and tolerance values |
ISO 492:2014
|
Rolling bearings — Radial bearings — Geometrical product specifications (GPS) and tolerance values |
ISO 10303-214:2010
|
Industrial automation systems and integration Product data representation and exchange Part 214: Application protocol: Core data for automotive mechanical design processes |
I.S. EN 62496-1:2009
|
OPTICAL CIRCUIT BOARDS - PART 1: GENERAL |
IEC 60807-1:1991
|
Rectangular connectors for frequencies below 3 MHz - Part 1:Generic specification - General requirements and guide for thepreparation of detail specifications for connectors with assessedquality |
ISO 3601-2:2016
|
Fluid power systems — O-rings — Part 2: Housing dimensions for general applications |
ISO 10303-224:2006
|
Industrial automation systems and integration — Product data representation and exchange — Part 224: Application protocol: Mechanical product definition for process planning using machining features |
ISO 5145:2017
|
Gas cylinders — Cylinder valve outlets for gases and gas mixtures — Selection and dimensioning |
ISO/TR 10064-4:1998
|
Code of inspection practice Part 4: Recommendations relative to surface texture and tooth contact pattern checking |
CEN ISO/TS 8062-2 : 2013 COR 2014
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013, CORRECTED VERSION 2013-11-01) |
DIN EN 12561-5:2011-10
|
Railway applications - Tank wagons - Part 5: Devices for vapour return while filling or emptying of liquid products |
DIN EN ISO 9409-1:2004-09
|
MANIPULATING INDUSTRIAL ROBOTS - MECHANICAL INTERFACES - PART 1: PLATES |
DIN EN ISO 4759-1 E : 2001
|
TOLERANCES FOR FASTENERS - PART 1: BOLTS, SCREWS, STUDS AND NUTS - PRODUCT GRADES A, B AND C |
DIN EN 12561-6:2011-10
|
Railway applications - Tank wagons - Part 6: Manholes |
DIN EN 12561-2:2011-10
|
Railway applications - Tank wagons - Part 2: Bottom emptying devices for liquid products including vapour return |
DIN EN 12561-3:2011-10
|
Railway applications - Tank wagons - Part 3: Bottom filling and emptying devices for gases liquefied under pressure |
BS EN ISO 4759-1:2001
|
Tolerances for fasteners Bolts, screws, studs and nuts. Product grades A, B and C |
IEC 61073-1:2009
|
Fibre optic interconnecting devices and passive components - Mechanical splices and fusion splice protectors for optical fibres and cables - Part 1: Generic specification |
ISO 1179-2:2013
|
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) |
PD ISO/TR 18569:2004
|
Safety of machinery. Guidelines for the understanding and use of safety of machinery standards. |
BS EN ISO 9409-2:2003
|
Manipulating industrial robots. Mechanical interfaces Shafts |
BS EN 12561-6:2011
|
Railway applications. Tank wagons Manholes |
ISO 1938-2:2017
|
Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 2: Reference disk gauges |
ISO/TS 8062-2:2013
|
Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 2: Rules |
BS EN 20286-2:1993
|
ISO system of limits and fits ISO system of limits and fits. Tables of standard tolerance grades and limit deviations for holes and shafts |
BS EN 10277-1:2008
|
Bright steel products. Technical delivery conditions General |
EN 62099:2001
|
Fibre optic wavelength switches - Generic specification |
EN 61978-1:2014
|
Fibre optic interconnecting devices and passive components - Fibre optic passive chromatic dispersion compensators - Part 1: Generic specification |
EN 12561-3:2011/AC:2014
|
RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE |
EN 60875-1:2015
|
Fibre optic interconnecting devices and passive components - Non-wavelength-selective fibre optic branching devices - Part 1: Generic specification |
DIN ISO 10285:2009-11
|
ROLLING BEARINGS - SLEEVE TYPE LINEAR BALL BEARINGS - BOUNDARY DIMENSIONS AND TOLERANCES |
EN 62074-1:2014
|
Fibre optic interconnecting devices and passive components - Fibre optic WDM devices - Part 1: Generic specification |
EN 50033 : 1991
|
ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - CAPLIGHTS FOR MINES SUSCEPTIBLE TO FIREDAMP |
EN 10088-5:2009
|
Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
EN 60869-1:2013
|
Fibre optic interconnecting devices and passive components - Fibre optic passive power control devices - Part 1: Generic specification |
DIN ISO 8489-5:1997-05
|
TEXTILE MACHINERY AND ACCESSORIES - CONES FOR CROSS WINDING - PART 5: DIMENSIONS, TOLERANCES AND DESIGNATION OF CONES WITH A HALF ANGLE OF 5 DEGREES 57 MINUTES |
DIN ISO 6284:1997-09
|
CONSTRUCTION DRAWINGS - INDICATION OF LIMIT DEVIATIONS |
EN 61269-1:1997
|
Fibre optic terminus sets - Part 1: Generic specification |
EN 61274-1:2012
|
Fibre optic interconnecting devices and passive components - Adaptors for fibre optic connectors - Part 1: Generic specification |
EN 60603-1:1998
|
Connectors for frequencies below 3 MHz for use with printed boards - Part 1: Generic specification - General requirements and guide for the preparation of detail specifications, with assessed quality |
EN 62496-4:2011
|
Optical circuit boards - Part 4: Interface standards - General and guidance |
DIN EN ISO 898-6:1996-02
|
MECHANICAL PROPERTIES OF FASTENERS - PART 6: NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD |
DIN ISO 8489-4:1997-05
|
TEXTILE MACHINERY AND ACCESSORIES - CONES FOR CROSS WINDING - PART 4: DIMENSIONS, TOLERANCES AND DESIGNATION OF CONES WITH A HALF ANGLE 4 DEGREES 20 MINUTES FOR WINDING FOR DYEING PURPOSES |
EN 60320-3:2014
|
Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges |
EN 60876-1:2014
|
Fibre optic interconnecting devices and passive components - Fibre optic spatial switches - Part 1: Generic specification |
DIN EN ISO 148-1:2017-05
|
METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 1: TEST METHOD (ISO 148-1:2016) |
EN 61073-1:2009
|
Fibre optic interconnecting devices and passive components - Mechanical splices and fusion splice protectors for optical fibres and cables - Part 1: Generic specification |
EN 60852-4:1996
|
Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 4: Transformers and inductors using YUI-2 laminations |
EN 61020-1:2009
|
Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification |
ASME B32.100 : 2016
|
PREFERRED METRIC SIZES FOR FLAT, ROUND, SQUARE, RECTANGULAR AND HEXAGONAL METAL PRODUCTS |
BS 4215-4:1990
|
Resistance spot welding electrodes, electrode holders and ancillary equipment Specification for taper plug gauges and taper ring gauges |
I.S. EN ISO 6284:1999
|
CONSTRUCTION DRAWINGS - INDICATION OF LIMIT DEVIATIONS |