BS EN 60970:2007
|
Insulating liquids. Methods for counting and sizing particles |
BS ISO 16431:2012
|
Hydraulic fluid power. System clean-up procedures and verification of cleanliness of assembled systems |
BS ISO 14085-6:2015
|
Aerospace series. Hydraulic filter elements. Test methods Initial cleanliness level |
07/19969755 DC : 0
|
BS ISO 11500 - HYDRAULIC FLUID POWER - DETERMINATION OF PARTICULATE CONTAMINATION LEVEL OF A LIQUID SAMPLE BY AUTOMATIC PARTICLE COUNTING USING THE LIGHT EXTINCTION PRINCIPLE |
BS ISO 16232-7:2007
|
Road vehicles. Cleanliness of components of fluid circuits Particle sizing and counting by microscopic analysis |
03/100561 DC : DRAFT JULY 2003
|
IEC 60422 ED.3 - SUPERVISION AND MAINTENANCE GUIDE FOR MINERAL INSULATING OILS IN ELECTRICAL EQUIPMENT |
BS ISO 4406:2017
|
Hydraulic fluid power. Fluids. Method for coding the level of contamination by solid particles |
ISO 3938:1986
|
Hydraulic fluid power — Contamination analysis — Method for reporting analysis data |
PD ISO/TR 15640:2011
|
Hydraulic fluid power contamination control. General principles and guidelines for selection and application of hydraulic filters |
14/30244780 DC : 0
|
BS ISO 19859 - GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION |
I.S. EN 60422:2013
|
MINERAL INSULATING OILS IN ELECTRICAL EQUIPMENT - SUPERVISION AND MAINTENANCE GUIDANCE (IEC 60422:2013 (EQV)) |
PD ISO/TR 10686:2013
|
Hydraulic fluid power. Method to relate the cleanliness of a hydraulic system to the cleanliness of the components and hydraulic fluid that make up the system |
BS ISO 16232-5:2007
|
Road vehicles. Cleanliness of components of fluid circuits Method of extraction of contaminants on functional test bench |
DD ISO/TS 11365:2011
|
Petroleum and related products. Guidance for the maintenance and use of triaryl phosphate ester turbine-control fluids |
BS ISO 16232-3:2007
|
Road vehicles. Cleanliness of components of fluid circuits Method of extraction of contaminants by pressure rinsing |
04/30098086 DC : DRAFT APR 2004
|
ISO 16232-3 - ROAD VEHICLES - CLEANLINESS OF COMPONENTS OF FLUID CIRCUITS - PART 3: METHOD OF EXTRACTION OF CONTAMINANTS BY PRESSURE RINSING |
ISO 16431:2012
|
Hydraulic fluid power — System clean-up procedures and verification of cleanliness of assembled systems |
ISO/TS 11366:2011
|
Petroleum and related products — Guidance for in-servicing of lubricating oils for steam, gas and combined-cycle turbines |
ASTM D 8128 : 2017
|
Standard Guide for Monitoring Failure Mode Progression in Industrial Applications with Rolling Element Ball Type Bearings |
ISO 19859:2016
|
Gas turbine applications Requirements for power generation |
BS ISO 21018-1:2008
|
Hydraulic fluid power. Monitoring the level of particulate contamination of the fluid General principles |
12/30234431 DC : 0
|
BS ISO 9940 - AEROSPACE - FIRE RESISTANT HYDRAULIC FLUIDS |
PD ISO/TS 18409:2018
|
Hydraulic fluid power. Hose and hose assemblies. Method of collecting a fluid sample for analyzing the cleanliness of a hose or hose assembly |
BS ISO 12500-3:2009
|
Filters for compressed air. Test methods Particulates |
05/30138884 DC : DRAFT SEP 2005
|
|
PD ISO/TS 16431:2002
|
Hydraulic fluid power. Assembled systems. Verification of cleanliness |
ISO 14085-6:2015
|
Aerospace series Hydraulic filter elements Test methods Part 6: Initial cleanliness level |
16/30273511 DC : 0
|
BS ISO 23309 - HYDRAULIC FLUID POWER SYSTEMS - ASSEMBLED SYSTEMS - METHODS OF CLEANING LINES BY FLUSHING |
10/30215366 DC : 0
|
BS EN 60422 - MINERAL INSULATING OILS IN ELECTRICAL EQUIPMENT - SUPERVISION AND MAINTENANCE GUIDANCE |
16/30323482 DC : 0
|
BS ISO 11365 - PETROLEUM AND RELATED PRODUCTS - MAINTENANCE AND USE GUIDE FOR TRIARYL PHOSPHATE ESTER TURBINE CONTROL FLUIDS |
ISO/TR 16386:2014
|
Impact of changes in ISO fluid power particle counting Contamination control and filter test standards |
ISO 11500:2008
|
Hydraulic fluid power — Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle |
ISO/TR 16144:2002
|
Hydraulic fluid power Calibration of liquid automatic particle counters Procedures used to certify the standard reference material SRM 2806 |
BS ISO 18413:2015
|
Hydraulic fluid power. Cleanliness of components. Inspection document and principles related to contaminant extraction and analysis, and data reporting |
SAE J 1227 : 2013
|
ASSESSING CLEANLINESS OF HYDRAULIC FLUID POWER COMPONENTS AND SYSTEMS |
ISO/TS 11365:2011
|
Petroleum and related products Guidance for the maintenance and use of triaryl phosphate ester turbine-control fluids |
I.S. EN 60970:2007/AC:2008
|
INSULATING LIQUIDS - METHODS FOR COUNTING AND SIZING PARTICLES |
ASTM D 6813 : 2002 : REV A : R2007
|
Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps |
ASTM D 6813 : 2002
|
Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps |
ASTM D 6813 : 2002 : REV A : R2013
|
Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps (Withdrawn 2015) |
ASTM D 6813 : 2002 : REV A
|
Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps |
SAE AS 4059F : 2013
|
AEROSPACE FLUID POWER - CONTAMINATION CLASSIFICATION FOR HYDRAULIC FLUIDS |
BIS IS 13236 : 2013
|
INSULATING LIQUIDS - METHODS FOR COUNTING AND SIZING PARTICLES |
ISO 21018-1:2008
|
Hydraulic fluid power Monitoring the level of particulate contamination of the fluid Part 1: General principles |
BS ISO 9940:2015
|
Aerospace series. Fluid, hydraulic, phosphate ester-base, fire resistant. Technical specification |
API TR 17TR5 : 2012
|
AVOIDANCE OF BLOCKAGES IN SUBSEA PRODUCTION CONTROL AND CHEMICAL INJECTION SYSTEMS |
05/30098235 DC : 0
|
ISO 21081-1 - HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION OF THE FLUID - PART 1: GENERAL PRINCIPLES |
DD ISO/TR 16144:2002
|
Hydraulic fluid power. Calibration of liquid automatic particle counters. Procedures used to certify the standard reference material SRM 2806 |
14/30302298 DC : 0
|
BS ISO 9940 - AEROSPACE SERIES - FLUID, HYDRAULIC, PHOSPHATE ESTER-BASE, FIRE RESISTANT - TECHNICAL SPECIFICATION |
13/30290460 DC : 0
|
BS ISO 9940 - AEROSPACE SERIES - FLUID, HYDRAULIC, PHOSPHATE ESTER-BASE, FIRE RESISTANT - TECHNICAL SPECIFICATION |
BS ISO 11500:2008
|
Hydraulic fluid power. Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle |
00/704296 DC : DRAFT FEB 2000
|
ISO/CD 16431 - HYDRAULIC FLUID POWER - ASSEMBLED SYSTEMS - METHOD FOR ACHIEVING ROLL-OFF CLEANLINESS |
04/30098093 DC : DRAFT APR 2004
|
ISO 16232-5 - ROAD VEHICLES - CLEANLINESS OF COMPONENTS OF FLUID CIRCUITS - PART 5: METHOD OF EXTRACTION OF CONTAMINANTS ON FUNCTIONAL TEST BENCH |
ISO/TR 10686:2013
|
Hydraulic fluid power Method to relate the cleanliness of a hydraulic system to the cleanliness of the components and hydraulic fluid that make up the system |
07/30164305 DC : 0
|
BS ISO 12500-3 - FILTERS FOR COMPRESSED AIR - TEST METHODS - PART 3: PARTICULATES |
BS ISO 16232-2:2007
|
Road vehicles. Cleanliness of components of fluid circuits Method of extraction of contaminants by agitation |
SAE MS 1000 : 2013
|
LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS - CLASSIFICATION |
ISO 12500-3:2009
|
Filters for compressed air Test methods Part 3: Particulates |
ASTM D 7973 : 2014
|
Standard Guide for Monitoring Failure Mode Progression in Plain Bearings |
ISO 9940:2015
|
Aerospace series Fluid, hydraulic, phosphate ester-base, fire resistant Technical specification |
ISO 16232-2:2007
|
Road vehicles Cleanliness of components of fluid circuits Part 2: Method of extraction of contaminants by agitation |
ISO/TR 15640:2011
|
Hydraulic fluid power contamination control General principles and guidelines for selection and application of hydraulic filters |
ISO 11365:2017
|
Petroleum and related products — Requirements and guidance for the maintenance of triaryl phosphate ester turbine control fluids |
API STD 17F : 2017
|
SUBSEA PRODUCTION CONTROL SYSTEMS |
ISO 16232-7:2007
|
Road vehicles Cleanliness of components of fluid circuits Part 7: Particle sizing and counting by microscopic analysis |
IEC 60970:2007
|
Insulating liquids - Methods for counting and sizing particles |
BS ISO/TR 16386:1999
|
Impact of changes in ISO fluid power particle counting. Contamination control and filter test standards |
BS ISO 19859:2016
|
Gas turbine applications. Requirements for power generation |
08/30187368 DC : DRAFT JULY 2008
|
BS ISO 11365 - PETROLEUM AND RELATED PRODUCTS - MAINTENANCE AND USE GUIDE FOR TRIARYL PHOSPHATE ESTER TURBINE CONTROL FLUIDS |
08/30187364 DC : DRAFT JULY 2008
|
BS ISO 11366 - PETROLEUM AND RELATED PRODUCTS - GUIDANCE FOR IN-SERVICE MONITORING OF LUBRICATING OILS FOR STEAM, GAS AND COMBINED-CYCLE TURBINES |
UNE-EN 60422:2013
|
Mineral insulating oils in electrical equipment - Supervision and maintenance guidance |
IEC 60422:2013
|
Mineral insulating oils in electrical equipment - Supervision and maintenance guidance |
EN 60970:2007/corrigendum:2008
|
INSULATING LIQUIDS - METHODS FOR COUNTING AND SIZING PARTICLES |
PD ISO/TR 16386:2014
|
Impact of changes in ISO fluid power particle counting. Contamination control and filter test standards |
12/30250727 DC
|
BS EN ISO 13628-6 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 6: SUBSEA PRODUCTION CONTROL SYSTEMS |
BS ISO 11365:2017
|
Petroleum and related products. Requirements and guidance for the maintenance of triaryl phosphate ester turbine control fluids |
BS 5540-1:1978
|
Specification for evaluating particulate contamination of hydraulic fluids Qualifying and controlling of cleaning methods for sample containers |
BS EN 60422:2013
|
Mineral insulating oils in electrical equipment. Supervision and maintenance guidance |
09/30176303 DC : 0
|
BS ISO 16431 - HYDRAULIC FLUID POWER - ASSEMBLED SYSTEMS - SYSTEM CLEAN-UP PROCEDURES AND VERIFICATION OF CLEANLINESS |
11/30075025 DC : 0
|
ISO 21017 - HYDRAULIC FLUID POWER - CLEANLINESS OF PARTS AND COMPONENTS - EXPRESSION OF PARTICULATE CONTAMINATION LEVEL |
ISO/TS 18409:2018
|
Hydraulic fluid power Hose and hose assemblies Method of collecting a fluid sample for analyzing the cleanliness of a hose or hose assembly |
13/30271044 DC : 0
|
BS ISO 14085-6 - AEROSPACE SERIES - HYDRAULIC FILTER ELEMENTS - TEST METHODS - PART 6: INITIAL CLEANLINESS LEVEL |
UNI ISO 4406 : 2013
|
HYDRAULIC FLUID POWER - FLUIDS - METHOD FOR CODING THE LEVEL OF CONTAMINATION BY SOLID PARTICLES |
09/30204130 DC : DRAFT MAY 2009
|
BS ISO 11217 - AEROSPACE - HYDRAULIC SYSTEM FLUID CONTAMINATION - LOCATION OF SAMPLING POINTS AND CRITERIA FOR SAMPLING |
CEI EN 60970 : 2007
|
INSULATING LIQUIDS - METHODS FOR COUNTING AND SIZING PARTICLES |
04/30098083 DC : DRAFT APR 2004
|
ISO 16232-2 - ROAD VEHICLES - FLUID CIRCUITS - CLEANLINESS OF COMPONENTS - PART 2: METHOD OF EXTRACTION OF CONTAMINANTS BY AGITATION |
ISO 3722:1976
|
Hydraulic fluid power — Fluid sample containers — Qualifying and controlling cleaning methods |
ISO 16232-3:2007
|
Road vehicles Cleanliness of components of fluid circuits Part 3: Method of extraction of contaminants by pressure rinsing |
ISO 18413:2015
|
Hydraulic fluid power Cleanliness of components Inspection document and principles related to contaminant extraction and analysis, and data reporting |
ISO 16232-5:2007
|
Road vehicles Cleanliness of components of fluid circuits Part 5: Method of extraction of contaminants on functional test bench |
DD ISO/TS 11366:2011
|
Petroleum and related products. Guidance for in-servicing of lubricating oils for steam, gas and combined-cycle turbines |
EN 60422:2013
|
Mineral insulating oils in electrical equipment - Supervision and maintenance guidance |