ISO 527-2 : 2012(R2017)

Current

Current The latest, up-to-date edition.

Preview

PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 2: TEST CONDITIONS FOR MOULDING AND EXTRUSION PLASTICS

Available format(s): Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

Language(s): English, French, Russian

Published date: 01-01-2012

Publisher: International Organization for Standardization

Table of Contents - (Show below) - (Hide below)

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Principle and methods
5 Apparatus
6 Test specimens
7 Conditioning
8 Procedure
9 Calculation and expression of results
10 Precision
11 Test report
Annex A (informative) - Small specimens
Annex B (informative) - Precision statement
Bibliography

Abstract - (Show below) - (Hide below)

This part of ISO 527 specifies the test conditions for determining the tensile properties of moulding and extrusion plastics, based upon the general principles given in ISO 527-1.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Revision
Status	Current
Publisher	International Organization for Standardization
Development Note	Supersedes ISO 6239, ISO R 527 (04/2001) Supersedes ISO/DIS 527-2. (02/2012)
Pages
ISBN
Committee	TC 61
Supersedes	ISO R 527 : 1966 ISO 527-2 : 1993 ISO 6239 : 1986

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
DS EN ISO 527-2 : 2012	Identical
UNE EN ISO 527-2 : 1997	Identical
NBN EN ISO 527-2 : 2012	Identical
NF EN ISO 527-2 : 2012	Identical
NEN EN ISO 527-2 : 2012	Identical
NS EN ISO 527-2 : 2012	Identical
I.S. EN ISO 527-2:2012	Identical
PN EN ISO 527-2 : 2012	Identical
SN EN ISO 527-2 : 2012	Identical
UNI EN ISO 527-2 : 2012	Identical
SS-EN ISO 527-2:2012	Identical
BS EN ISO 527-2 : 1996	Identical
EN ISO 527-2 : 2012	Identical
DIN EN ISO 527-2 E : 2012	Identical
(INACTIVE RECORD) DIN EN ISO 527-2:2012-06	Identical
DS EN ISO 527-2 : 2012	Identical
SANS 527-2 : 1ED 1993(R2016)	Identical
EN ISO 527-2 : 2012	Identical
DIN EN ISO 527-2:2012-06	Identical
UNE EN ISO 527-2 : 1997	Identical
JIS K 7161-2:2014	Identical
SS-EN ISO 527-2:2012	Identical
PN EN ISO 527-2 : 2012	Identical
BS 2782-3.322(1994) : 1994 AMD 8639	Identical
BS EN ISO 527-2 : 1996	Identical
I.S. EN ISO 527-2:2012	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

DIN EN ISO 11296-3:2011-07	PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES
BS EN ISO 20029-2 : 2018	PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
SAE J 1639 : 1995(S2017)	CLASSIFICATION SYSTEM FOR AUTOMOTIVE POLYAMIDE (PA) PLASTICS
02/103631 DC : DRAFT MAY 2002	BS EN 14471 - CHIMNEYS - REQUIREMENTS AND TEST METHODS FOR SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS
07/30169818 DC : 0	BS EN 1013 - LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
15/30315513 DC : 0	BS ISO 4586-6 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL, HPDL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 6: CLASSIFICATION AND SPECIFICATIONS FOR EXTERIOR-GRADE COMPACT LAMINATES OF THICKNESS 2 MM AND GREATER
DIN EN ISO 22088-5:2009-10	Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 5: Constant tensile deformation method (ISO 22088-5:2006)
07/30168088 DC : DRAFT AUG 2007	BS EN 13341 AMD 1 - THERMOPLASTICS STATIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, KEROSENE AND DIESEL FUELS - BLOW MOULDED POLYETHYLENE, ROTATIONALLY MOULDED POLYETHYLENE AND POLYAMIDE 6 BY ANIONIC POLYMERIZATION TANKS - REQUIREMENTS AND TEST METHODS
BS EN ISO 16396-2 : 2017	PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 16396-2:2017)
DD CLC/TS 50131-2-7-3 : 2009	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-3: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACTIVE)
DIN EN ISO 6259-3:2015-11	THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES - PART 3: POLYOLEFIN PIPES (ISO 6259-3:2015)
UNE EN ISO 16396-1 : 2015	PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM, MARKING OF PRODUCTS AND BASIS FOR SPECIFICATIONS (ISO 16396-1:2015)
12/30263857 DC : 0	BS EN 4702-05 - AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - WASHER
BS EN 14963 : 2006	ROOF COVERINGS - CONTINUOUS ROOFLIGHTS OF PLASTICS WITH OR WITHOUT UPSTANDS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS
ISO 178 : 2010(R2015)	PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES
I.S. EN ISO 10350-1:2017	PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 1: MOULDING MATERIALS (ISO 10350-1:2017)
ISO 11963 : 2012(R2017)	PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS
BS ISO 14949 : 2001	IMPLANTS FOR SURGERY - TWO-PART ADDITION-CURE SILICONE ELASTOMERS
BS EN 16506 : 2014	SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL)
DIN EN ISO 21003-2:2011-07	Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes (ISO 21003-2:2008 + Amd 1:2011); German version EN ISO 21003-2:2008 + A1:2011
DIN EN 15542:2008-06	DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL CEMENT MORTAR COATING FOR PIPES - REQUIREMENTS AND TEST METHODS
BS ISO 23013 : 2016	ROAD VEHICLES - DETERMINATION OF RESISTANCE TO FORCED ENTRY OF SECURITY GLASS CONSTRUCTIONS USED IN VEHICLE GLAZING - TEST OF GLAZING SYSTEMS
16/30338093 DC : 0	BS EN 26:2015/A1 - GAS-FIRED INSTANTANEOUS WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER
12/30275810 DC : 0	BS EN 16506 - SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL)
12/30255180 DC : 0	BS EN ISO 11403-1 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 1: MECHANICAL PROPERTIES
13/30276234 DC : 0	BS EN 15346 - PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES
NBR ISO 16486-1 : 2013	PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS WITH FUSION JOINTING AND MECHANICAL JOINTING - PART 1: GENERAL
ISO 17467-1 : 2012	PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS JOINTED BY SOLVENT CEMENT - PART 1: GENERAL
NBR IEC 60216-2 : 2017	ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 2: DETERMINATION OF THERMAL ENDURANCE PROPERTIES OF ELECTRICAL INSULATING MATERIALS - CHOICE OF TEST CRITERIA
10/30196141 DC : 0	BS ISO 11119-3 - GAS CYLINDERS OF COMPOSITE CONSTRUCTION - SPECIFICATION AND TEST METHODS - PART 3: FULLY WRAPPED FIBRE REINFORCED COMPOSITE GAS CYLINDERS AND TUBES WITH NON-METALLIC AND NON-LOAD SHARING METAL LINERS
UNE EN 50290-2-23 : 2014	COMMUNICATION CABLES - PART 2-23: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR MULTI-PAIR CABLES USED IN ACCESS TELECOMMUNICATION NETWORKS: OUTDOOR CABLES
DIN EN ISO 178 E : 2013	PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010 + AMD.1:2013)
UNE EN ISO 9988-2 : 2015	PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 9988-2:2006)
UNE EN ISO 22088-6 : 2010	PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 6: SLOW STRAIN RATE METHOD
DIN EN ISO 13274 E : 2014	PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - PLASTICS COMPATIBILITY TESTING FOR PACKAGING AND IBCS (ISO 13274:2013 + COR. 1:2014)
I.S. EN 60079-0:2012	EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011 (MOD))
ISO 4433-1 : 1997(R2013)	THERMOPLASTICS PIPES - RESISTANCE TO LIQUID CHEMICALS - CLASSIFICATION - IMMERSION TEST METHOD
I.S. EN 4702-03:2017	AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 03: STUD - QUICK-RELEASE AND LOCKING
PREN ISO 7792-2 : DRAFT 2011	PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 16365-2 : 2014	PLASTICS - THERMOPLASTIC POLYURETHANES FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 25137-2 E : 2017	PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 25137-2:2009)
DIN EN 89 E : 2015	GAS-FIRED STORAGE WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER
11/30248330 DC : 0	BS ISO 17467-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS JOINTED BY SOLVENT CEMENT - PART 1: GENERAL
UNI EN 15344 : 2008	PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYETHYLENE (PE) RECYCLATES
NF EN ISO 22088-6 : 2009	PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 6: SLOW STRAIN RATE METHOD
BS EN 124-5 : 2015	GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 5: GULLY TOPS AND MANHOLE TOPS MADE OF COMPOSITE MATERIALS
BS EN 4702-03 : 2017	AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 03: STUD - QUICK-RELEASE AND LOCKING
ISO 11515 : 2013	GAS CYLINDERS - REFILLABLE COMPOSITE REINFORCED TUBES OF WATER CAPACITY BETWEEN 450 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING
15/30327856 DC : 0	BS ISO 20558-2 - PLASTICS - POLY(PHENYLENE SULFIDE) (PPS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMEN AND DETERMINATION OF PROPERTIES
BS EN ISO 25137-2 : 2017	PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN ISO 178 : 2010	PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES
DIN EN ISO 16396-1:2015-05	PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM, MARKING OF PRODUCTS AND BASIS FOR SPECIFICATIONS (ISO 16396-1:2015)
97/713393 DC : DRAFT AUG 1997	PREN 4364 - AEROSPACE STANDARD - CAST (PMMA) ACRYLIC - PROPERTIES
97/713394 DC : DRAFT AUG 1997	PREN 4365 - AEROSPACE STANDARD - HEAT AND CRAZING RESISTANT ACRYLIC - CAST AND CROSS LINKED - LOW MOISTURE ABSORPTION - PROPERTIES
05/30130524 DC : DRAFT MAR 2005	ISO 22621-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS FOR MAXIMUM OPERATING UP TO AND INCLUDING 2 MPA (20 BAR) - POLYAMIDE (PA) - PART 1: GENERAL
07/30083514 DC : 0	BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED AND SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS
BIS IS 8504-2 : 2013	ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 2: DETERMINATION OF THERMAL ENDURANCE PROPERTIES OF ELECTRICAL INSULATING MATERIALS - CHOICE OF TEST CRITERIA
CSA C22.2 No. 0.17 : 2000:R2013	EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS
16/30338090 DC : 0	BS EN 89:2015/A1 - GAS-FIRED STORAGE WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER
DIN ISO 15014 E : 2015	PLASTICS - EXTRUDED SHEETS OF POLY(VINYLIDENE FLUORIDE) (PVDF) - REQUIREMENTS AND TEST METHODS (ISO 15014:2007)
DNV/GL-CP-0086 : LATEST	ADHESIVE SYSTEMS
14/30304058 DC : 0	BS EN ISO 17855-2 - PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
ISO 22621-1 : 2007	PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS FOR MAXIMUM OPERATING PRESSURES UP TO AND INCLUDING 2 MPA (20 BAR) - POLYAMIDE (PA) - PART 1: GENERAL
BS ISO 4433-1 : 1997	THERMOPLASTICS PIPES - RESISTANCE TO LIQUID CHEMICALS - CLASSIFICATION - IMMERSION TEST METHOD
DIN ISO 9523 E : 2016	TOURING SKI-BOOTS FOR ADULTS - INTERFACE WITH TOURING SKI-BINDINGS - REQUIREMENTS AND TEST METHODS (ISO 9523:2015)
UNI EN ISO 15015 : 2011	PLASTICS - EXTRUDED SHEETS OF IMPACT-MODIFIED ACRYLONITRILE-STYRENE COPOLYMERS (ABS, AEPDS AND ASA) - REQUIREMENTS AND TEST METHODS
DIN EN 16506 E : 2014	SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL)
DIN EN ISO 11296-3 E : 2011	PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES
(INACTIVE RECORD) DIN EN ISO 12086-1:2006-05	PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
UNI EN ISO 11296-7 : 2013	PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 7: LINING WITH SPIRALLY-WOUND PIPES
ISO 21004 : 2006(R2015)	PLASTICS PIPING SYSTEMS - MULTILAYER PIPES AND THEIR JOINTS, BASED ON THERMOPLASTICS, FOR WATER SUPPLY
BS ISO 21809-4 : 2009	PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 4: POLYETHYLENE COATINGS (2-LAYER PE)
I.S. EN ISO 80369-7:2017 COR 2017	SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 7: CONNECTORS FOR INTRAVASCULAR OR HYPODERMIC APPLICATIONS (ISO 80369-7:2016, CORRECTED VERSION 2016-12-01)
BS ISO 9523 : 2015	TOURING SKI-BOOTS FOR ADULTS - INTERFACE WITH TOURING SKI-BINDINGS - REQUIREMENTS AND TEST METHODS
10/30227822 DC : DRAFT DEC 2010	BS ISO 7148-2 - PLAIN BEARINGS - TESTING OF THE TRIBOLOGICAL BEHAVIOUR OF BEARING MATERIALS - PART 2: TESTING OF POLYMER-BASED BEARING MATERIALS
BS ISO 17467-1 : 2012	PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS JOINTED BY SOLVENT CEMENT - PART 1: GENERAL
NBR 15891-4 : 2013	IMPLANTS FOR SURGERY - ABSORBABLE RESINS - PART 4: TEST METHOD FOR IN VITRO DEGRADATION TESTING OF HYDROLYTICALLY DEGRADABLE POLYMER RESINS AND FABRICATED FORMS
BS ISO 294-5 : 2011	PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS - PART 5: PREPARATION OF STANDARD SPECIMENS FOR INVESTIGATING ANISOTROPY
08/30174001 DC : DRAFT JUNE 2008	BS ISO 11296-3 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES
DIN EN ISO 11296-4 E : 2011	PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 4: LINING WITH CURED-IN-PLACE PIPES
DIN EN ISO 15015 E : 2011	PLASTICS - EXTRUDED SHEETS OF IMPACT-MODIFIED ACRYLONITRILE-STYRENE COPOLYMERS (ABS, AEPDS AND ASA) - REQUIREMENTS AND TEST METHODS
10/30191247 DC : DRAFT APR 2010	BS EN ISO 13628-16 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 16: SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT
BS EN 15860 : 2010	PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS
14/30304062 DC : 0	BS EN ISO 19069-2 - PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
11/30236286 DC : 0	BS EN ISO 11963 - PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS
DIN EN 1013:2015-03	LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
15/30315519 DC : 0	BS ISO 4586-8 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL, HPDL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 8: CLASSIFICATION AND SPECIFICATIONS FOR ALTERNATIVE CORE LAMINATES
DIN EN ISO 1797 E : 2017	DENTISTRY - SHANKS FOR ROTARY AND OSCILLATING INSTRUMENTS (ISO 1797:2017)
97/713395 DC : DRAFT AUG 1997	PREN 4366 - AEROSPACE STANDARD - HEAT AND CRAZING RESISTANT ACRYLIC - CAST, CROSSLINKED AND MULTI-AXIALLY STRETCHED - LOW MOISTURE ABSORPTION - PROPERTIES
BS EN 16240 : 2013	LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
BS ISO 25137-2 : 2009	PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN 50290-2-23 : 2013	COMMUNICATION CABLES - PART 2-23: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR MULTI-PAIR CABLES USED IN ACCESS TELECOMMUNICATION NETWORKS: OUTDOOR CABLES
DIN ISO 23013 E : 2017	ROAD VEHICLES - DETERMINATION OF RESISTANCE TO FORCED ENTRY OF SECURITY GLASS CONSTRUCTIONS USED IN VEHICLE GLAZING - TEST OF GLAZING SYSTEMS (ISO 23013:2016)
03/300201 DC : DRAFT FEB 2003	IEC 60079-0 ED.4.0 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 0: GENERAL REQUIREMENTS
15/30311270 DC : 0	BS EN ISO 294-5 - PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS - PART 5: PREPARATION OF STANDARD SPECIMENS FOR INVESTIGATING ANISOTROPY
14/30300605 DC : 0	BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS
VDI 3388 : 2012-03	MATERIALS FOR TRIMMING AND FORMING DIES
I.S. EN ISO 21809-3:2016	PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS (ISO 21809-3:2016)
ISO 23013 : 2016	ROAD VEHICLES - DETERMINATION OF RESISTANCE TO FORCED ENTRY OF SECURITY GLASS CONSTRUCTIONS USED IN VEHICLE GLAZING - TEST OF GLAZING SYSTEMS
06/30130317 DC : DRAFT JULY 2006	ISO 11833-1 - PLASTICS - UNPLASTICIZED POLY (VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS
10/30218935 DC : 0	BS EN 15502-2-1 - GAS-FIRED HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B[2], B[3] AND B[5] APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW
04/30092689 DC : DRAFT OCT 2004	ISO 22088-5 - PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 5: CONSTANT TENSILE DEFORMATION METHOD
CEI EN 50290-2-23 : 2014	COMMUNICATION CABLES - PART 2-23: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR MULTI-PAIR CABLES USED IN ACCESS TELECOMMUNICATION NETWORKS: OUTDOOR CABLES
S.R. CLC/TS 50131-2-7-2:2009	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-2: INTRUSION DETECTORS - GLASS BREAK DETECTORS (PASSIVE)
BS EN ISO 22088-5 : 2009	PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 5: CONSTANT TENSILE DEFORMATION METHOD
12/30264198 DC : 0	BS EN ISO 11296-7 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 7: LINING WITH SPIRALLY-WOUND PIPES
DIN EN 124-5 E : 2015	GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 5: GULLY TOPS AND MANHOLE TOPS MADE OF COMPOSITE MATERIALS
14/30304003 DC : 0	BS EN 62899-1 ED.1 - PRINTED ELECTRONICS - MATERIALS - PART 1: SUBSTRATES
BS EN 15345 : 2007	PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES
ISO 14949 : 2001(R2013)	IMPLANTS FOR SURGERY - TWO-PART ADDITION-CURE SILICONE ELASTOMERS
BS ISO 7148-2 : 2012	PLAIN BEARINGS - TESTING OF THE TRIBOLOGICAL BEHAVIOUR OF BEARING MATERIALS - PART 2: TESTING OF POLYMER-BASED BEARING MATERIALS
08/30180847 DC : DRAFT JUNE 2008	BS EN 10245-5 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE
14/30300568 DC : 0	BS EN 15274 - GENERAL PURPOSE ADHESIVES FOR STRUCTURAL ASSEMBLY - REQUIREMENTS AND TEST METHODS
BS EN ISO 80369-7 : 2017	SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 7: CONNECTORS FOR INTRAVASCULAR OR HYPODERMIC APPLICATIONS
NBR 15723-15 : 2017	IMPLANTS FOR SURGERY - POLYMERIC MATERIALS - PART 15: REQUIREMENTS AND TEST METHODS FOR ACRYLIC MOLDING RESINS BY INJECTION
(INACTIVE RECORD) DIN EN ISO 11963:2013-03	PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS (ISO 11963:2012)
14/30283167 DC : 0	BS ISO 18263-2 - PLASTICS - MIXTURES OF POLYPROPYLENE (PP) AND POLYETHYLENE (PE) RECYCLATE DERIVED FROM PP AND PE USED FOR FLEXIBLE AND RIGID CONSUMENR PACKAGING - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
04/30091878 DC : DRAFT FEB 2004	BS EN ISO 13000-2 - PLASTICS - POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
17/30345075 DC : 0	BS EN ISO 11296-4 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 4: LINING WITH CURED-IN-PLACE PIPES
17/30349217 DC : 0	BS EN ISO 21970-2 - PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
ISO 12215-5 : 2008(R2011)	SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION
ONORM EN ISO 15527 : 2013	PLASTICS - COMPRESSION-MOULDED SHEETS OF POLYETHYLENE (PE-UHMW, PE-HD) - REQUIREMENTS AND TEST METHODS (ISO 15527:2010)
BS 2782-9.910A(1996) : 1996	METHODS OF TESTING PLASTICS - SAMPLING AND TEST SPECIMEN PREPARATION - INJECTION MOULDING TEST SPECIMENS OF THERMOPLASTIC MATERIALS
DIN EN ISO 1797 : 2016	DENTISTRY - SHANKS FOR ROTARY AND OSCILLATING INSTRUMENTS (ISO 1797:2017)
14/30298693 DC : 0	BS ISO 18250-8 - CONNECTORS FOR RESERVOIR DELIVERY SYSTEMS FOR HEALTHCARE APPLICATIONS - PART 8: CITRATE-BASED ANTICOAGULANT SOLUTION FOR APHERESIS APPLICATIONS
13/30263803 DC : 0	BS ISO 17296-4 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 4: DATA PROCESSING
06/30136263 DC : DRAFT MAR 2006	ISO 21138-2 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYLCHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 2 - PIPES AND FITTINGS WITH SMOOTH EXTERNAL SURFACE - TYPE A
ASTM D 6778 : 2014 : REDLINE	Standard Classification System and Basis for Specification for Polyoxymethylene Molding and Extrusion Materials (POM)
(INACTIVE RECORD) DIN EN ISO 11833-1:2012-11	PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM (ISO 11833-1:2012)
BS ISO 11403-1 : AMD 10683	PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - MECHANICAL PROPERTIES
UNE EN 15346 : 2015	PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES
UNE EN ISO 6259-3 : 2015	THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES - PART 3: POLYOLEFIN PIPES (ISO 6259-3:2015)
08/30174008 DC : DRAFT JUNE 2008	BS ISO 11296-4 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 4: LINING WITH CURED-IN-PLACES PIPES
16/30329416 DC : 0	BS EN 12566-3 - SMALL WASTEWATER TREATMENT SYSTEMS UP TO 50 PT - PART 3: PACKAGED AND/OR SITE ASSEMBLED DOMESTIC WASTEWATER TREATMENT PLANTS
02/709771 DC : DRAFT AUG 2002	ISO/DIS 9349 - PREINSULATED DUCTILE IRON PIPELINE SYSTEMS
DIN EN ISO 9988-2 E : 2015	PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 9988-2:2006)
BS ISO 11040-4 : 2015	PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING
ONORM EN ISO 11833-1 : 2012	PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM (ISO 11833-1:2012)
BS ISO 15014 : 2007	PLASTICS - EXTRUDED SHEETS OF POLY(VINYLIDENE FLUORIDE) (PVDF) - REQUIREMENTS AND TEST METHODS
BS EN 61234-2 : 1998	ELECTRICAL INSULATING MATERIALS - METHODS OF TEST FOR HYDROLYTIC STABILITY - PART 2: MOULDED THERMOSETS
15/30253325 DC : 0	BS ISO 17519 - GAS CYLINDERS - REFILLABLE PERMANENTLY MOUNTED COMPOSITE TUBES FOR TRANSPORTATION
BS EN ISO 21809-3 : 2016	PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS
11/30242905 DC : 0	BS EN ISO 3673-2 - PLASTICS - EPOXY RESINS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
08/30154948 DC : DRAFT FEB 2008	BS ISO 21809-4 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 4: POLYETHYLENE COATINGS (2-LAYER PE)
15/30304408 DC : 0	BS EN ISO 20029-2 - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
12/30266170 DC : 0	BS EN 15534-1 - COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1 : TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS
BS 2782-11.1161A(1998) : 1998	METHODS OF TESTING PLASTICS - THERMOPLASTICS PIPES, FITTINGS AND VALVES - THERMOPLASTICS PIPES - RESISTANCE TO LIQUID CHEMICALS - CLASSIFICATION - IMMERSION TEST METHOD
DIN ISO 7148-2:2014-07	PLAIN BEARINGS - TESTING OF THE TRIBOLOGICAL BEHAVIOUR OF BEARING MATERIALS - PART 2: TESTING OF POLYMER-BASED PLAIN BEARING MATERIALS (ISO 7148-2:2012)
04/102582 DC : 0	ISO 15869-1 - GASEOUS HYDROGEN AND HYDROGEN BLENDS - LAND VEHICLE FUEL TANKS - PART 1: GENERAL REQUIREMENTS
BS ISO 13781 : 2017	IMPLANTS FOR SURGERY - HOMOPOLYMERS, COPOLYMERS AND BLENDS ON POLY(LACTIDE) - IN VITRO DEGRADATION TESTING
11/30192003 DC : 0	BS EN ISO 7792-2 - PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN ISO 17855-2 : 2016	PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
PREN 16506 : DRAFT 2012	SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL)
11/30237918 DC : 0	BS EN ISO 13274 - PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - PLASTICS COMPATIBILITY TESTING FOR PACKAGING AND IBCS
BS EN ISO 20028-2 : 2017	PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20028-2:2017)
12/30258334 DC : 0	BS EN 1013 - LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTIC SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
09/30209028 DC : 0	BS EN 131-2 - LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
BS ISO 10931-1 : 1997	PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLY(VINYLIDENE FLUORIDE)
BS ISO 20753 : 2008	PLASTICS - TEST SPECIMENS
UNE EN ISO 80369-7 : 2017	SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 7: CONNECTORS FOR INTRAVASCULAR OR HYPODERMIC APPLICATIONS (ISO 80369-7:2016, CORRECTED VERSION 2016-12-01)
UNI EN ISO 11296-3 : 2011	PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES
BS ISO 7628 : 2010	ROAD VEHICLES - THERMOPLASTICS TUBING FOR AIR BRAKING SYSTEMS
10/30196135 DC : 0	BS ISO 11515 - GAS CYLINDERS - REFILABLE COMPOSITE REINFORCED TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING
ISO 21138-2 : 2007(R2011)	PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 2: PIPES AND FITTINGS WITH SMOOTH EXTERNAL SURFACE, TYPE A
DIN EN ISO 15527 E : 2013	PLASTICS - COMPRESSION-MOULDED SHEETS OF POLYETHYLENE (PE-UHMW, PE-HD) - REQUIREMENTS AND TEST METHODS (ISO 15527:2010)
DIN EN ISO 17855-2:2016-06	PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 17855-2:2016)
08/30180643 DC : DRAFT APRIL 2008	BS ISO 15869-3 - GASEOUS HYDROGEN AND HYDROGEN BLENDS - LAND VEHICLE FUEL TANKS
NBR 15723-7 : 2013	IMPLANTS FOR SURGERY - POLYMERIC MATERIALS - PART 7: SPECIFICATION FOR POLYETHERKETONEETHER-KETONEKETONE (PEKEKK) POLYMERS
UNE EN ISO 22088-5 : 2010	PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 5: CONSTANT TENSILE DEFORMATION METHOD
DIN EN 15345 E : 2008	PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES
13/30273499 DC : 0	BS ISO 11040-4 - PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING
18/30369393 DC : 0	BS EN ISO 11296-7 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 7: LINING WITH SPIRALLY-WOUND PIPES
17/30355239 DC : 0	BS ISO 4586-4 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL, HPDL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 4: CLASSIFICATION AND SPECIFICATIONS FOR COMPACT LAMINATES OF THICKNESS 2 MM AND GREATER
DD CLC/TS 50131-2-7-2 : 2009	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-2: INTRUSION DETECTORS - GLASS BREAK DETECTORS (PASSIVE)
NBR ISO 14949 : 2011	IMPLANTS FOR SURGERY - TWO-PART ADDITION-CURE SILICONE ELASTOMERS
DIN EN ISO 13274:2014-06	PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - PLASTICS COMPATIBILITY TESTING FOR PACKAGING AND IBCS (ISO 13274:2013 + COR. 1:2014)
UNI EN 15347 : 2008	PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF PLASTICS WASTES
UNI EN 16506 : 2014	SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL)
14/30278882 DC : 0	BS EN 60079-7 IEC 60079-7 ED. 5.0 - EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E'
DIN 16972 E : 1995	COMPRESSION MOULDED PLATES MADE OF POLYETHYLENE HIGH DENSITY (PE-UHMW), (PE-HMW), (PE-HD) - TECHNICAL SPECIFICATIONS
13/30240167 DC : 0	BS ISO 16365-2 - PLASTICS - THERMOPLASTIC POLYURETHANES FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
UNI EN ISO 12215-5 : 2014	SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION
17/30342710 DC : 0	BS EN ISO 12215-5 - SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION
BS EN 50131-2-8 : 2016	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-8: INTRUSION DETECTORS - SHOCK DETECTORS
DIN EN ISO 22088-6 E : 2009	PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 6: SLOW STRAIN RATE METHOD
NF EN ISO 11296-3 : 2011	PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES
DIN EN 16506:2014-12	SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL)
08/30170332 DC : DRAFT JAN 2008	BS EN ISO 8986-2 - PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
ISO 11296-7 : 2011	PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 7: LINING WITH SPIRALLY-WOUND PIPES
NBR 15574 : 2008	FULL WRAPPED METAL LINER CONTAINER FOR STORAGE AND/OR TRANSPORTATION OF LIQUEFIED PETROLEUM GASES (LPG) - DESIGN, PRODUCTION AND INSPECTION
16/30340635 DC : 0	BS EN 438-9 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 9: CLASSIFICATION AND SPECIFICATIONS FOR ALTERNATIVE CORE LAMINATES
BS ISO 9988-2 : 2006	PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 25137-2:2017	PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 25137-2:2009)
11/30229997 DC : 0	BS EN 14427 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION
BS 6288-4(1995) : 1995	MAGNETIC TAPE SOUND RECORDING AND REPRODUCING SYSTEMS - PART 4: MECHANICAL MAGNETIC TAPE PROPERTIES
I.S. EN ISO 9988-2:2015	PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 9988-2:2006)
05/30128281 DC : DRAFT JAN 2005	ISO 9988-2 - PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS 7008-1(1994) : AMD 8821	ACQUISITION AND PRESENTATION OF COMPARABLE DATA FOR BASIC PROPERTIES OF PLASTICS - METHOD FOR SINGLE POINT DATA
DIN EN ISO 19069-2 E : 2016	PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 19069-2:2016)
DD CLC/TS 50131-2-7-1 : 2009	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-1: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACOUSTIC)
BS 2782-3.326F(1997) : 1997	PLASTICS - DETERMINATION OF TENSILE PROPERTIES - TEST CONDITIONS FOR ISOTROPIC AND ORTHOTROPIC FIBRE-REINFORCED PLASTIC COMPOSITES
UNI EN ISO 22088-5 : 2009	PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 5: CONSTANT TENSILE DEFORMATION METHOD
BS EN ISO 15015 : 2011	PLASTICS - EXTRUDED SHEETS OF IMPACT-MODIFIED ACRYLONITRILE-STYRENE COPOLYMERS (ABS, AEPDS AND ASA) - REQUIREMENTS AND TEST METHODS
(INACTIVE RECORD) DIN EN ISO 12086-2:2006-05	PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
INCITS/ISO/IEC 22050 : 2002	INFORMATION TECHNOLOGY - DATA INTERCHANGE ON 12,7 MM, 384-TRACK MAGNETIC TAPE CARTRIDGES - ULTRIUM-1 FORMAT
16/30314617 DC : 0	BS ISO 19469-3 - PLASTIC PIPING SYSTEMS FOR NON PRESSURE UNDERGROUND DRAINAGE - SINGLE WALL CORRUGATED PIPING SYSTEMS OF POLYETHYLENE (PE), POLYPROPYLENE (PP) AND UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 3: PIPES AND FITTINGS FOR DEEP BURIAL INSTALLATIONS
BS EN ISO 22088-6 : 2009	PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 6: SLOW STRAIN RATE METHOD
98/123516 DC : DRAFT JULY 1998	PREN 13121-1 - GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 1: RAW MATERIALS - ACCEPTANCE CONDITIONS AND USAGE CONDITIONS
I.S. EN ISO 19069-2:2016	PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 19069-2:2016)
IEC 62642-2-71 : 1ED 2015	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-71: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACOUSTIC)
DIN ISO 11040-4 E : 2017	PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING (ISO 11040-4:2015)
S.R. CLC/TS 50131-2-7-1:2009	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-1: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACOUSTIC)
UNE EN ISO 19069-2 : 2016	PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 19069-2:2016)
BS EN 4702-05 : 2017	AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 05: RETAINING WASHER
BS EN ISO 15527 : 2013	PLASTICS - COMPRESSION-MOULDED SHEETS OF POLYETHYLENE (PE-UHMW, PE-HD) - REQUIREMENTS AND TEST METHODS
DIN ISO 7148-2 E : 2001	PLAIN BEARINGS - TESTING OF THE TRIBOLOGICAL BEHAVIOUR OF BEARING MATERIALS - PART 2: TESTING OF POLYMER-BASED PLAIN BEARING MATERIALS (ISO 7148-2:2012)
INCITS/ISO/IEC 15521 : 1998 : R2005	INFORMATION TECHNOLOGY - 3,81 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DDS-3 FORMAT USING 125 M LENGTH TAPES
04/30078983 DC : DRAFT OCT 2004	ISO 22088-4 - PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 4: BALL OR PIN IMPRESSION METHOD
DIN EN ISO 6259-3 E : 2015	THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES - PART 3: POLYOLEFIN PIPES (ISO 6259-3:2015)
I.S. EN ISO 22088-5:2009	PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 5: CONSTANT TENSILE DEFORMATION METHOD
05/30091855 DC : DRAFT MAR 2005	ISO 1874-2 - PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 15015:2011-07	Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) - Requirements and test methods (ISO 15015:2011)
13/30271610 DC : 0	BS ISO 17296-3 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 3: TEST METHODS
BS EN ISO 21003-2 : 2008	MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 2: PIPES
BS ISO 1622-2 : 1995 AMD 10649	PLASTICS - POLYSTYRENE (PS) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
ASTM D 5138 : 2016 : REDLINE	Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP)
NBR NM-ISO 11439 : 2008	GAS CYLINDERS - HIGH PRESSURE CYLINDERS FOR THE ON-BOARD STORAGE OF NATURAL GAS AS A FUEL FOR AUTOMOTIVE VEHICLES
BS 7825-3.3(1997) : 1997	CALIBRATION OF RUBBER AND PLASTICS TEST EQUIPMENT - CALIBRATION SCHEDULES - MECHANICAL PROPERTIES OF PLASTICS
DIN EN ISO 9988-2:2015-05	PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 9988-2:2006)
BS ISO 14910-2 : 1997 AMD 16024	PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 12086-1 E : 2006	PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
DIN EN 16240:2014-03	LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
DIN EN ISO 20028-2 E : 2017	PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20028-2:2017)
BS ISO 18263-2 : 2015	PLASTICS - MIXTURES OF POLYPROPYLENE (PP) AND POLYETHYLENE (PE) RECYCLATE DERIVED FROM PP AND PE USED FOR FLEXIBLE AND RIGID CONSUMER PACKAGING - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN ISO 13274 : 2013	PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - PLASTICS COMPATIBILITY TESTING FOR PACKAGING AND IBCS
15/30328314 DC : 0	BS EN ISO 20557-2 - PLASTICS - POLY(PHENYLENE ETHER) (PPE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMEN AND DETERMINATION OF PROPERTIES
NBR 15057 : 2016	PLASTIC CONTAINER FOR STORAGE AND/OR TRANSPORTATION OF LIQUEFIED PETROLEUM GASES (LPG) - DESIGN, PRODUCTION AND INSPECTION
(INACTIVE RECORD) DIN EN ISO 11296-7:2013-05	PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 7: LINING WITH SPIRALLY-WOUND PIPES (ISO 11296-7:2011)
ISO 11119-3 : 2013(R2018)	GAS CYLINDERS - REFILLABLE COMPOSITE GAS CYLINDERS AND TUBES - DESIGN, CONSTRUCTION AND TESTING - PART 3: FULLY WRAPPED FIBRE REINFORCED COMPOSITE GAS CYLINDERS AND TUBES UP TO 450 L WITH NON-LOAD-SHARING METALLIC OR NON-METALLIC LINERS
DIN ISO 23013 : 2016	ROAD VEHICLES - DETERMINATION OF RESISTANCE TO FORCED ENTRY OF SECURITY GLASS CONSTRUCTIONS USED IN VEHICLE GLAZING - TEST OF GLAZING SYSTEMS (ISO 23013:2016)
15/30320571 DC : 0	BS EN 60335-1 ED 5.0 /A2 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS
UNE EN 124-5 : 2015	GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 5: GULLY TOPS AND MANHOLE TOPS MADE OF COMPOSITE MATERIALS
05/30102804 DC : DRAFT MAY 2005	ISO 18872 - PLASTICS - DETERMINATION OF TENSILE PROPERTIES AT HIGH STRAIN RATES
ISO 18263-2 : 2015	PLASTICS - MIXTURES OF POLYPROPYLENE (PP) AND POLYETHYLENE (PE) RECYCLATE DERIVED FROM PP AND PE USED FOR FLEXIBLE AND RIGID CONSUMER PACKAGING - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
CSA C22.2 No. 0.17 : 2000 : R2013	EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS
PREN 438-9 : DRAFT 2016	HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 9: CLASSIFICATION AND SPECIFICATIONS FOR ALTERNATIVE CORE LAMINATES
ONORM EN ISO 11963 : 2013	PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS (ISO 11963:2012)
UNI EN 15542 : 2008	DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL CEMENT MORTAR COATING FOR PIPES - REQUIREMENTS AND TEST METHODS
BS EN 15534-1 : 2014	COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS
PREN ISO 1874-1 : DRAFT 2008	PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION
10/30233680 DC : 0	BS EN 13575 - STATIC THERMOPLASTIC TANKS FOR THE ABOVE GROUND STORAGE OF CHEMICALS - BLOW MOULDED OR ROTATIONALLY MOULDED POLYETHYLENE TANKS - REQUIREMENTS AND TEST METHODS
DIN ISO 16486-1:2015-07	PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS WITH FUSION JOINTING AND MECHANICAL JOINTING - PART 1: GENERAL (ISO 16486-1:2012 + AMD 1:2014)
PREN ISO 11403-1 : DRAFT 2012	PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 1: MECHANICAL PROPERTIES (ISO/DIS 11403-1:2012)
DIN EN 15542 E : 2008	DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL CEMENT MORTAR COATING FOR PIPES - REQUIREMENTS AND TEST METHODS
EN 4702-05 : 2017	AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 05: RETAINING WASHER
04/30078976 DC : DRAFT OCT 2004	ISO 22088-3 - PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 3: BENT STRIP METHOD
BS 7933-2(2007) : 2007	ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 2: FINGERPRINTING AND TYPE TESTS FOR HEAT SHRINKABLE COMPONENTS FOR LOW VOLTAGE APPLICATIONS
DIN EN 15860 E : 2012	PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS
15/30315534 DC : 0	BS EN ISO 16396-2 - PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 4894-2 : AMD 10662	PLASTICS - STYRENE/ACRYLONITRILE (SAN) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN 60094-4 : 1994	MAGNETIC TAPE SOUND RECORDING AND REPRODUCING SYSTEMS - PART 4: MECHANICAL MAGNETIC TAPE PROPERTIES
DIN EN 15345:2008-02	PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES
NFC 33 009-2 : 2008	ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 2: FINGERPRINTING AND TYPE TESTS FOR HEAT SHRINKABLE COMPONENTS FOR LOW VOLTAGE APPLICATIONS
DIN EN 14963 E : 2006	ROOF COVERINGS - CONTINUOUS ROOFLIGHTS OF PLASTICS WITH OR WITHOUT UPSTANDS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS
04/30115317 DC : 0	BS EN ISO 10350-1 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 1: MOULDING MATERIALS
DIN ISO 11040-4:2007-10	PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING (ISO 11040-4:2015)
BS EN ISO 6259-3 : 2015	THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES - PART 3: POLYOLEFIN PIPES (ISO 6259-3:2015)
BS ISO 12086-1 : 1995 AMD 10638	PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
BS ISO 11515 : 2013	GAS CYLINDERS - REFILLABLE COMPOSITE REINFORCED TUBES OF WATER CAPACITY BETWEEN 450 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING
15/30315507 DC : 0	BS ISO 4586-4 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL, HPDL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 4: CLASSIFICATION AND SPECIFICATIONS FOR COMPACT LAMINATES OF THICKNESS 2 MM AND GREATER
15/30291323 DC : 0	BS EN ISO 1797 - DENTISTRY - SHANKS FOR ROTARY, OSCILLATING AND RECIPROCATING INSTRUMENTS
ISO 16486-1 : 2012	PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS WITH FUSION JOINTING AND MECHANICAL JOINTING - PART 1: GENERAL
PREN 15274 : DRAFT 2014	GENERAL PURPOSE ADHESIVES FOR STRUCTURAL ASSEMBLY - REQUIREMENTS AND TEST METHODS
13/30274529 DC : 0	BS EN ISO 6259-3 - THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES - PART 3: POLYOLEFIN PIPES
15/30296854 DC : 0	BS ISO 13781 - INPLANTS FOR SURGERY - HOMOPOLYMERS, COPOLYMERS AND BLENDS ON POLY(LACTIDE) - IN VITRO DEGRADATION TESTING
BS ISO 14663-2 : 1999 AMD 16029	PLASTICS - ETHYLENE/VINYL ALCOHOL (EVOH) COPOLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
00/717312 DC : 0	PREN ISO 12215-5 - SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES, DESIGN STRESSES, SCANTLING DETERMINATION
BS ISO 7792-2 : 1997 AMD 15252	PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
03/119348 DC : 0	PREN 1013-1 - LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETING FOR INTERNAL AND EXTERNAL ROOFING, WALL CLADDING AND CEILING FINISHES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
12/30259634 DC : 0	BS ISO 15399 - GASEOUS HYDROGEN - CYLINDERS AND TUBES FOR STATIONARY STORAGE
DD CEN/TS 15534-2 : 2007	WOOD-PLASTICS COMPOSITES (WPC) - PART 2: CHARACTERISATION OF WPC MATERIALS
14/30276899 DC : 0	BS ISO 23013 - ROAD VEHICLES - DETERMINATION TO FORCED ENTRY OF SAFETY GLASS CONSTRUCTIONS USED IN VEHICLE GLAZING - TEST OF GLAZING SYSTEMS
DIN EN 15860 : 2016	PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS
BS EN ISO 16396-1 : 2015	PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM, MARKING OF PRODUCTS AND BASIS FOR SPECIFICATIONS
01/121538 DC : DRAFT APRIL 2001	BS EN ISO 899-1 PLASTICS - DETERMINATION OF CREEP BEHAVIOUR - PART 1: TENSILE CREEP
BS ISO 1268-11 : 2005	FIBRE-REINFORCED PLASTICS - METHODS OF PRODUCING TEST PLATES - PART 11: INJECTION MOULDING OF BMC AND OTHER LONG-FIBRE MOULDING COMPOUNDS - SMALL PLATES
06/30146370 DC : DRAFT SEP 2006	ISO 15439-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 4 BAR - POLYAMIDE (PA) - PART 1: GENERAL
BS ISO 18872 : 2007	PLASTICS - DETERMINATION OF TENSILE PROPERTIES AT HIGH STRAIN RATES
BS ISO 3672-2 : 2000 AMD 13326	PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
12/30263853 DC : 0	BS EN 4702-03 - AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - STUD - QUICK-RELEASE AND LOCKING
BS ISO 17194 : 2007	STRUCTURAL ADHESIVES - A STANDARD DATABASE OF PROPERTIES
17/30360679 DC : DRAFT SEP 2017	BS EN 17152-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND CONVEYANCE AND STORAGE OF NON-POTABLE WATER - BOXES USED FOR INFILTRATION, ATTENUATION AND STORAGE SYSTEMS - PART 1: SPECIFICATIONS FOR STORM WATER BOXES MADE OF PP AND PVC
NBR 15723-4 : 2010	IMPLANTS FOR SURGERY - POLYMERIC MATERIALS - PART 4: SPECIFICATION FOR POROUS POLYETHYLENE POLYMERS
DIN EN ISO 19069-2:2016-07	PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 19069-2:2016)
DIN EN ISO 21003-2 E : 2011	MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 2: PIPES
DD ISO/TS 15869 : 2009	GASEOUS HYDROGEN AND HYDROGEN BLENDS - LAND VEHICLE FUEL TANKS
I.S. EN ISO 13274:2013	PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - PLASTICS COMPATIBILITY TESTING FOR PACKAGING AND IBCS (ISO 13274:2013)
I.S. EN ISO 6259-3:2015	THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES - PART 3: POLYOLEFIN PIPES (ISO 6259-3:2015)
I.S. EN ISO 16396-2:2017	PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 16396-2:2017)
11/30250549 DC : 0	BS EN 14471 - CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
08/30161535 DC : 0	BS EN ISO 1874-1 - PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION
BS ISO 2897-2 : 1994 AMD 10661	PLASTICS - IMPACT-RESISTANT POLYSTYRENE (PS-I) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
97/713392 DC : DRAFT AUG 1997	PREN 4243 - AEROSPACE SERIES - ACRYLIC (PMMA) SHEETS - TECHNICAL SPECIFICATION
12/30240423 DC : 0	BS ISO 16396-1 - PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM, MARKING OF PRODUCTS AND BASIS FOR SPECIFICATIONS
ISO 11659-2 : 2004	TEXTILE MACHINERY AND ACCESSORIES - MACHINE PARTS IN CONTACT WITH TEXTILE PROCESSING OILS - PART 2: DETERMINATION OF THE IMPACT ON POLYMERIC MATERIALS
DIN EN 16240 E : 2014	LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
10/30216993 DC : 0	BS EN 295-4 - VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS
DIN EN ISO 12086-2 E : 2006	PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
NBR ISO 7823-1 : 2012	PLASTIC - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: CAST SHEETS
12/30192217 DC : 0	BS ISO 12856 - PLASTIC RAILWAY SLEEPERS (RAILROAD TIES)
17/30355251 DC : 0	BS ISO 4586-8 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL, HPDL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 8: CLASSIFICATION AND SPECIFICATIONS FOR ALTERNATIVE CORE LAMINATES
DIN EN ISO 22088-6:2009-10	Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 6: Slow strain rate method (ISO 22088-6:2006)
08/30171587 DC : DRAFT MAY 2008	BS ISO 7628 - ROAD VEHICLES - THERMOPLASTICS TUBING FOR AIR BRAKING SYSTEMS
BS ISO 1268-8 : 2004	FIBRE-REINFORCED PLASTICS - METHODS OF PRODUCING TEST PLATES - PART 8: COMPRESSION MOULDING OF SMC AND BMC
(INACTIVE RECORD) DIN ISO 9523:2016-05	TOURING SKI-BOOTS FOR ADULTS - INTERFACE WITH TOURING SKI-BINDINGS - REQUIREMENTS AND TEST METHODS (ISO 9523:2015)
15/30304402 DC : 0	BS EN ISO 20028-2 - PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN ISO 1797 : 2017	DENTISTRY - SHANKS FOR ROTARY AND OSCILLATING INSTRUMENTS
I.S. EN ISO 14910-2:2013	PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013, CORRECTED VERSION 2015-12-15)
17/30354769 DC : 0	BS EN ISO 29988-2 - PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
NBR 15723-9 : 2010	IMPLANTS FOR SURGERY - POLYMERIC MATERIALS - PART 9: CRITERIA FOR DEFINITION AND DESCRIPTION OF THERMOSET EPOXY PLASTICS
ISO 15814 : 1999	IMPLANTS FOR SURGERY - COPOLYMERS AND BLENDS BASED ON POLYLACTIDE - IN VITRO DEGRADATION TESTING
BS ISO 17282 : 2004	PLASTICS - GUIDE TO THE ACQUISITION AND PRESENTATION OF DESIGN DATA
03/118818 DC : DRAFT DEC 2003	BS EN ISO 7391-2 - PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
CLC/TS 50131-2-7-2 : 2009	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-2: INTRUSION DETECTORS - GLASS BREAK DETECTORS (PASSIVE)
BS EN ISO 19069-2 : 2016	PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
17/30335677 DC : 0	BS EN ISO 178 - PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES
BS ISO 10366-2 : 94 AMD 10665	PLASTICS - METHYL METHYLACRYLATE/ACRYLONITRILE/BUTADIENE/STYRENE (MABS) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
CSA C22.2 No. 0.17 : 2000 : R2004	EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS
DIN EN 14963:2006-12	ROOF COVERINGS - CONTINUOUS ROOFLIGHTS OF PLASTICS WITH OR WITHOUT UPSTANDS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS
BS ISO 2580-2 : 94 AMD 10660	PLASTICS - ACRYLONITRILE/BUTADIENE/STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 1163-2 : 1995 AMD 10744	PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) MOULDING AND EXTRUSION MATERIALS
08/30165044 DC : DRAFT FEB 2008	BS ISO 28078-2 - PLASTICS - POLY(PHENYLENE SULFIDE) (PPS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN 1013 : 2012	LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
11/30238648 DC : DRAFT FEB 2011	BS EN 16240 - LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
08/30180835 DC : DRAFT JUNE 2008	BS EN 10245-1 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES
EN 4702-03 : 2017	AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 03: STUD - QUICK-RELEASE AND LOCKING
04/30109201 DC : DRAFT OCT 2004	EN 14879-2 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 2: COATINGS ON METALLIC COMPONENTS
ISO 15014 : 2007(R2015)	PLASTICS - EXTRUDED SHEETS OF POLY(VINYLIDENE FLUORIDE) (PVDF) - REQUIREMENTS AND TEST METHODS
BS ISO 7391-2 : 1996 AMD 10746	PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
15/30330892 DC : 0	BS ISO 9349 - PREINSULATED DUCTILE IRON PIPELINE SYSTEMS
04/30081681 DC : DRAFT OCT 2004	ISO 22088-6 - PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 6: SLOW STRAIN RATE METHOD
DIN EN 1013 E : 2015	LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
BS ISO 8257-2 : 1990	PLASTICS - POLY (METHYL METHACRYLATE) (PMMA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DD CEN/TS 15534-1 : 2007	WOOD-PLASTICS COMPOSITES (WPC) - PART 1: TEST METHODS FOR CHARACTERISATION OF WPC MATERIALS AND PRODUCTS
DIN EN 295-3 E : 2012	VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 3: TEST METHODS
BS EN 60216-2 : 2005	ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 2: DETERMINATION OF THERMAL ENDURANCE PROPERTIES OF ELECTRICAL INSULATING MATERIALS - CHOICE OF TEST CRITERIA
DIN EN ISO 22088-5 E : 2009	PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 5: CONSTANT TENSILE DEFORMATION METHOD
ASTM D 6835 : 2017 : REDLINE	Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)
07/30152076 DC : 0	BS ISO 25137-2 - PLASTICS - SULFONE PLASTICS (SP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
05/30132152 DC : DRAFT APR 2005	ISO 21004 - PLASTICS PIPING SYSTEMS - MULTILAYER PIPES AND THEIR JOINTS, BASED ON THERMOPLASTICS, FOR WATER SUPPLY
ISO 11040-4 : 2015	PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING
PREN 15346 : DRAFT 2013	PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES
ISO 13781 : 2017	IMPLANTS FOR SURGERY - HOMOPOLYMERS, COPOLYMERS AND BLENDS ON POLY(LACTIDE) - IN VITRO DEGRADATION TESTING
BS ISO 13628-11 : 2007	PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 11: FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
API 17B REDLINE : 2008	RECOMMENDED PRACTICE FOR FLEXIBLE PIPE
ISO 15527 : 2010	PLASTICS - COMPRESSION-MOULDED SHEETS OF POLYETHYLENE (PE-UHMW, PE-HD) - REQUIREMENTS AND TEST METHODS
ASTM D 5935 : 1996	Practice for Acquisition and Presentation of Comparable Single-Point Data (Withdrawn 1998)
UNI EN ISO 21003-2 : 2011	MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 2: PIPES
07/30169634 DC : 0	BS ISO 294-5 - PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS - PART 5: PREPARATION OF STANDARD SPECIMENS FOR INVESTIGATING ANISOTROPY
08/30180838 DC : DRAFT JUNE 2008	BS EN 10245-2 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE
04/30122412 DC : DRAFT SEP 2004	ISO 17194 - STRUCTURAL ADHESIVES - STANDARD DATABASE OF PROPERTIES
BS ISO 2898-2 : 1997 AMD 10727	PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
NBR 16288-1 : 2014	IMPLANTS FOR ORTHOPEDICS - SILICONE ELASTOMERS - PART 1: SPECIFICATIONS AND GENERAL REQUIREMENTS
INCITS/ISO/IEC 15521 : 1998	INFORMATION TECHNOLOGY - 3,81 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DDS-3 FORMAT USING 125 M LENGTH TAPES
04/30078973 DC : DRAFT OCT 2004	ISO 22088-2 - PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 2: CONSTANT TENSILE STRESS METHOD
BS EN 50465 : 2015	GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW
NBR 15723-3 : 2010	IMPLANTS FOR SURGERY - POLYMERIC MATERIALS - PART 3: SPECIFICATION FOR POLYARYLETHERKETONE (PAEK) POLYMERS
ISO 11296-3 : 2009	PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES
UNI EN 16240 : 2014	LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
CSA C22.2 No. 60079.0 : 2015	EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
INCITS/ISO/IEC 15521 : 1998	INFORMATION TECHNOLOGY - 3,81 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DDS-3 FORMAT USING 125 M LENGTH TAPES
PREN 4366 : 200P1	AEROSPACE SERIES - HEAT AND CRAZING RESISTANT CAST ACRYLIC, CROSSLINKED, MULTI-AXIALLY STRETCHED, AND LOW MOISTURE ABSORPTION - PROPERTIES
I.S. EN 15502-2-1:2012	GAS-FIRED CENTRAL HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B2, B3 AND B5 APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW
04/30091870 DC : DRAFT FEB 2004	BS EN ISO 12086-2 - PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 9349 : 2017	DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS - THERMAL PREINSULATED PRODUCTS
UNI EN 1013 : 2015	LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
BS ISO 11833-1 : 1998	PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - SHEETS OF THICKNESS NOT LESS THAN 1 MM
EN 4691-1 : 2017	AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - PART 1: TECHNICAL SPECIFICATION
BS EN 15542 : 2008	DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL CEMENT MORTAR COATING FOR PIPES - REQUIREMENTS AND TEST METHODS
I.S. EN 4702-05:2017	AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 05: RETAINING WASHER
DIN EN ISO 80369-7 E : 2017	SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 7: CONNECTORS FOR INTRAVASCULAR OR HYPODERMIC APPLICATIONS (ISO 80369-7:2016, CORRECTED VERSION 2016-12-01)
PREN 4364 : 200P1	AEROSPACE SERIES - CAST ACRYLIC - PROPERTIES
DIN EN ISO 17855-2 E : 2016	PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 17855-2:2016)
PREN 4365 : 200P1	AEROSPACE SERIES - HEAT AND CRAZING RESISTANT CAST ACRYLIC, CROSSLINKED, AND LOW MOISTURE ABSORPTION - PROPERTIES
UNI EN 15345 : 2008	PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES
API RP 17B : 2014	RECOMMENDED PRACTICE FOR FLEXIBLE PIPE
UNE EN ISO 17855-2 : 2016	PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 17855-2:2016)
PREN 2719 : 200P1	AEROSPACE SERIES - POLYCARBONATE SHEET - TECHNICAL SPECIFICATION
DIN EN ISO 16396-2:2017-07	PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 16396-2:2017)
DIN EN ISO 11296-4:2011-07	PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 4: LINING WITH CURED-IN-PLACE PIPES
UNE EN ISO 13274 : 2014	PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - PLASTICS COMPATIBILITY TESTING FOR PACKAGING AND IBCS (ISO 13274:2013/COR 1:2014)
(INACTIVE RECORD) DIN EN ISO 80369-7:2017-10	SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 7: CONNECTORS FOR INTRAVASCULAR OR HYPODERMIC APPLICATIONS (ISO 80369-7:2016, CORRECTED VERSION 2016-12-01)
DIN EN 15502-2-1 E : 2017	GAS-FIRED CENTRAL HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B2, B3 AND B5 APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW
DIN EN ISO 15527:2013-05	PLASTICS - COMPRESSION-MOULDED SHEETS OF POLYETHYLENE (PE-UHMW, PE-HD) - REQUIREMENTS AND TEST METHODS (ISO 15527:2010)
DIN EN 124-5:2015-09	GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 5: GULLY TOPS AND MANHOLE TOPS MADE OF COMPOSITE MATERIALS
I.S. EN ISO 9093-2:2002	SMALL CRAFT - SEACOCKS AND THROUGH-HULL FITTINGS - PART 2: NON-METALLIC
DIN EN ISO 16396-2 E : 2017	PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 16396-2:2017)
UNE EN ISO 11296-4 : 2011	PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 4: LINING WITH CURED-IN-PLACE PIPES (ISO 11296-4:2009, CORRECTED VERSION 2010-06-01)
17/30325386 DC : 0	BS ISO 18250-1- CONNECTORS FOR RESERVOIR DELIVERY SYSTEMS - PART 1: GENERAL REQUIREMENTS AND COMMON TEST METHODS
BS ISO 12086-2 : 2001 AMD 10637	PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS
17/30355245 DC : 0	BS ISO 4586-6 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL, HPDL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 6: CLASSIFICATION AND SPECIFICATIONS FOR EXTERIOR-GRADE COMPACT LAMINATES OF THICKNESS 2 MM AND GREATER
DIN ISO 16486-1 E : 2015	PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS WITH FUSION JOINTING AND MECHANICAL JOINTING - PART 1: GENERAL (ISO 16486-1:2012 + AMD 1:2014)
ISO 20558-2 : 1ED 2018	PLASTICS - POLY(PHENYLENE SULFIDE) (PPS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMEN AND DETERMINATION OF PROPERTIES
DIN EN ISO 11296-7 E : 2013	PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 7: LINING WITH SPIRALLY-WOUND PIPES (ISO 11296-7:2011)
NF EN ISO 22088-5 : 2009	PLASTICS - DETERMINATION OF RESISTANCE TO STRESS CRACKING (ESC) - PART 5: CONSTANT TENSILE DEFORMATION METHOD
I.S. EN ISO 7391-2:2006	PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
PREN 15860 : DRAFT 2016	PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS
SAE J 2749 : 2017	HIGH STRAIN RATE TENSILE TESTING OF POLYMERS
UNI EN ISO 22088-6 : 2009	PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 6: SLOW STRAIN RATE METHOD
DNV/GL-CP-0089 : LATEST	EPOXY RESIN SYSTEMS
BS ISO 28078-2 : 2009	PLASTICS - POLY(PHENYLENE SULFIDE) (PPS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
PREN 4243 : 200P1	AEROSPACE SERIES - CAST ACRYLIC SHEETS - TECHNICAL SPECIFICATION
UNI EN ISO 20753 : 2014	PLASTICS - TEST SPECIMENS
UNI EN ISO 11296-4 : 2011	PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 4: LINING WITH CURED-IN-PLACE PIPES
I.S. EN 50131-2-8:2016	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-8: INTRUSION DETECTORS - SHOCK DETECTORS
ISO/IEC 15521 : 1998(R2003)	Information technology — 3,81 mm wide magnetic tape cartridge for information interchange — Helical scan recording — DDS-3 format using 125 m length tapes
ASTM D 4550 : 1998	SPECIFICATION FOR THERMOPLASTIC ELASTOMER-ETHER-ESTER (TEEE)
NBR ISO 21138-2 : 2016	PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY (VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 2: PIPES AND FITTINGS WITH SMOOTH EXTERNAL SURFACE, TYPE A
BS EN ISO 9988-2 : 2015	PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
API 17L1 : 2013	SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT
PREN ISO 11963 : DRAFT 2011	PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS
I.S. EN 60079-7:2015	EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E'
ISO 1797 : 2017	DENTISTRY - SHANKS FOR ROTARY AND OSCILLATING INSTRUMENTS
API 17J REDLINE : 2008	SPECIFICATION FOR UNBONDED FLEXIBLE PIPE
BS EN ISO 21809-1 : 2011	PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 1: POLYOLEFIN COATINGS (3-LAYER PE AND 3-LAYER PP)
DNV/GL-CP-0083 : LATEST	POLYESTER RESIN, VINYLESTER RESIN, GELCOAT AND TOPCOAT
UNE EN 50131-2-8 : 2017	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-8: INTRUSION DETECTORS - SHOCK DETECTORS
ISO 7148-2 : 2012	PLAIN BEARINGS - TESTING OF THE TRIBOLOGICAL BEHAVIOUR OF BEARING MATERIALS - PART 2: TESTING OF POLYMER-BASED BEARING MATERIALS
CSA C22.2 No. 0.17 : 2000	EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS
DNV/GL-CP-0431 : LATEST	PREPREG MATERIALS - NON-METALLIC MATERIALS
ONORM EN ISO 14910-2 : 2013	PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013)
ISO 12856-1 : 2014	PLASTICS - PLASTIC RAILWAY SLEEPERS FOR RAILWAY APPLICATIONS (RAILROAD TIES) - PART 1: MATERIAL CHARACTERISTICS
ISO 21138-3 : 2007(R2011)	PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: PIPES AND FITTINGS WITH NON-SMOOTH EXTERNAL SURFACE, TYPE B
I.S. EN ISO 178:2010	PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010)
NBR ISO 13781 : 1998	RESINAS E FORMAS FABRICADAS DE POLI(L-LACTATO) PARA IMPLANTES CIRURGICOS - ENSAIO DE DEGRADACAO IN VITRO
NBR ISO 7823-2 : 2012	PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 2: EXTRUDED SHEETS
BS EN 60079-7 : 2015	EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' (IEC 60079-7:2015)
I.S. EN ISO 20028-2:2017	PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20028-2:2017)
S.R. CLC/TS 50131-2-7-3:2009	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-3: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACTIVE)
API SPEC 17J : 2014	SPECIFICATION FOR UNBONDED FLEXIBLE PIPE
I.S. EN 15345:2007	PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES
ISO 20029-2 : 2017	PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
UNE EN 16506 : 2015	SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL)
I.S. EN 4691-1:2017	AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - PART 1: TECHNICAL SPECIFICATION
ISO 9349 : 2017	DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS - THERMAL PREINSULATED PRODUCTS
ISO TS 18226 : 2006(R2017)	PLASTICS PIPES AND FITTINGS - REINFORCED THERMOPLASTICS PIPE SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS FOR PRESSURES UP TO 4 MPA (40 BAR)
UNE EN ISO 21809-1 : 2011	PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 1: POLYOLEFIN COATINGS (3-LAYER PE AND 3-LAYER PP) (ISO 21809-1:2011)
ISO 20753 : 2008	PLASTICS - TEST SPECIMENS
UNE EN ISO 16396-2 : 2017	PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 16396-2:2017)
BS IEC 62899-201 : 2016	PRINTED ELECTRONICS - PART 201: MATERIALS - SUBSTRATES
UNI EN 15342 : 2008	PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLYSTYRENE (PS) RECYCLATES
CSA E60079.0 : 2002	ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - GENERAL REQUIREMENTS
AAMI ISO 80369-7 : 2016	SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 7: CONNECTORS FOR INTRAVASCULAR OR HYPODERMIC APPLICATIONS
I.S. EN 16240:2013	LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
BS EN 15502-2-1 : 2012	GAS-FIRED CENTRAL HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B2, B3 AND B5 APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW
BS EN ISO 20753 : 2014	PLASTICS - TEST SPECIMENS
PREN 131-2 : DRAFT 2009	LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
NBR 15723-13 : 2013	IMPLANTS FOR SURGERY - POLYMERIC MATERIALS - PART 13: SPECIFICATION FOR POLYETHERKETONEKETONE (PEKK)
ISO 18872 : 2007(R2015)	PLASTICS - DETERMINATION OF TENSILE PROPERTIES AT HIGH STRAIN RATES
I.S. EN ISO 294-5:2017	PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS - PART 5: PREPARATION OF STANDARD SPECIMENS FOR INVESTIGATING ANISOTROPY (ISO 294-5:2017)
I.S. EN ISO 15527:2013	PLASTICS - COMPRESSION-MOULDED SHEETS OF POLYETHYLENE (PE-UHMW, PE-HD) - REQUIREMENTS AND TEST METHODS (ISO 15527:2010)
NBR ISO 7823-3 : 2012	PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 3: CONTINUOUS CAST SHEETS
I.S. EN 16506:2014	SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL)
ISO 20557-2:2018	PLASTICS - POLY(PHENYLENE ETHER) (PPE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMEN AND DETERMINATION OF PROPERTIES
I.S. EN ISO 1797:2017	DENTISTRY - SHANKS FOR ROTARY AND OSCILLATING INSTRUMENTS (ISO 1797:2017)
I.S. EN ISO 20753:2014	PLASTICS - TEST SPECIMENS (ISO 20753:2008)
I.S. EN ISO 20029-2:2018	PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMEN AND DETERMINATION OF PROPERTIES (ISO 20029-2:2017)
DNV/GL-RP-F119 : LATEST	THERMOPLASTIC COMPOSITE PIPES
UNE EN ISO 21809-3 : 2016	PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS (ISO 21809-3:2016)
I.S. EN 15534-1:2014	COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS
S.R. CEN/TS 15534-1:2007	WOOD-PLASTICS COMPOSITES (WPC) - PART 1: TEST METHODS FOR CHARACTERISATION OF WPC MATERIALS AND PRODUCTS
CLC/TS 50131-2-7-3 : 2009	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-3: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACTIVE)
I.S. EN 60216-2:2005	ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 2: DETERMINATION OF THERMAL ENDURANCE PROPERTIES OF ELECTRICAL INSULATING MATERIALS - CHOICE OF TEST CRITERIA
NBR 15804-5 : 2010	POLYMERIC MATERIALS FOR MEDICAL APPLICATIONS - PART 5: SPECIFICATION FOR POLYOXYMETHYLENE (ACETAL)
NBR ISO 21138-3 : 2016	PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY (VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: PIPES AND FITTINGS WITH NON-SMOOTH EXTERNAL SURFACE, TYPE B
UNE ISO 1268-11 : 2012	FIBRE-REINFORCED PLASTICS - METHODS OF PRODUCING TEST PLATES - PART 11: INJECTION MOULDING OF BMC AND OTHER LONG-FIBRE MOULDING COMPOUNDS - SMALL PLATES
PREN 14471 : DRAFT 2011	CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
ONORM EN ISO 7391-2 : 2006	PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
CSA C22.2 No. 60079-7 : 2016	EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E'
NF EN ISO 11296-4 : 2011	PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 4: LINING WITH CURED-IN-PLACE PIPES
UNI EN ISO 11833-1 : 2012	PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM
I.S. HD 631.2:2007	ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 2: FINGERPRINTING AND TYPE TESTS FOR HEAT SHRINKABLE COMPONENTS FOR LOW VOLTAGE APPLICATIONS
HD 631.2 : 2007	ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 2: FINGERPRINTING AND TYPE TESTS FOR HEAT SHRINKABLE COMPONENTS FOR LOW VOLTAGE APPLICATIONS
I.S. EN 124-5:2015	GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 5: GULLY TOPS AND MANHOLE TOPS MADE OF COMPOSITE MATERIALS
EN ISO 899-1 : 2017	PLASTICS - DETERMINATION OF CREEP BEHAVIOUR - PART 1: TENSILE CREEP (ISO 899-1:2017)
ISO 11833-1 : 2012(R2017)	PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM
I.S. EN ISO 16396-1:2015	PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM, MARKING OF PRODUCTS AND BASIS FOR SPECIFICATIONS (ISO 16396-1:2015)
BS ISO 15527 : 2010	PLASTICS - COMPRESSION-MOULDED SHEETS OF POLYETHYLENE (PE-UHMW, PE-HD) - REQUIREMENTS AND TEST METHODS
DIN EN ISO 9093-2 E : 2003	SMALL CRAFT - SEACOCKS AND THROUGH-HULL FITTINGS - PART 2: NON-METALLIC
EN ISO 294-5 : 2017 COR 2018	PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS - PART 5: PREPARATION OF STANDARD SPECIMENS FOR INVESTIGATING ANISOTROPY (ISO 294-5:2017)
BS EN 60079-0 : 2012	EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
ASME PCC 2 : 2015	REPAIR OF PRESSURE EQUIPMENT AND PIPING
ISO 14910-2 : 2013	PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 20028-2 : 2015	PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20028-2:2017)
I.S. EN 1013:2012	LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
EN 15534-1 : 2014 + A1 2017	COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS
PREN ISO 11833-1 : DRAFT 2010	PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM
IEC 60079-0 : 7.0	EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
CEI EN 60216-2 : 2006	ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 2: DETERMINATION OF THERMAL ENDURANCE PROPERTIES OF ELECTRICAL INSULATING MATERIALS - CHOICE OF TEST CRITERIA
I.S. EN ISO 13628-11:2008	PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 11: FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
EN ISO 15527 : 2013	PLASTICS - COMPRESSION-MOULDED SHEETS OF POLYETHYLENE (PE-UHMW, PE-HD) - REQUIREMENTS AND TEST METHODS (ISO 15527:2010)
BS EN ISO 11296-7 : 2013	PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 7: LINING WITH SPIRALLY-WOUND PIPES (ISO 11296-7:2011)
UNE EN 1013 : 2013	LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
DIN EN ISO 12215-1 E : 2001	SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 1: MATERIALS: THERMOSETTING RESINS, GLASS-FIBRE REINFORCEMENT, REFERENCE LAMINATE
UNI EN ISO 21809-1 : 2011	PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 1: POLYOLEFIN COATINGS (3-LAYER PE AND 3-LAYER PP)
ISO 4586-6 : 2015	HIGH-PRESSURE DECORATIVE LAMINATES (HPL, HPDL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 6: CLASSIFICATION AND SPECIFICATIONS FOR EXTERIOR-GRADE COMPACT LAMINATES OF THICKNESS 2 MM AND GREATER
UNE EN ISO 11296-3 : 2011	PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES (ISO 11296-3:2009+COR 1:2011)
PREN 295-4 : DRAFT 2010	VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS
NORSOK M-710:2014	QUALIFICATION OF NON-METALLIC MATERIALS AND MANUFACTURERS - POLYMERS
I.S. EN ISO 11296-3:2011	PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES
UNI EN ISO 178 : 2013	PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES
BS EN ISO 11296-3 : 2011	PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES
ISO 28078-2 : 2009	PLASTICS - POLY(PHENYLENE SULFIDE) (PPS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
ISO 7823-2 : 2003(R2018)	PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 2: EXTRUDED SHEETS
DIN EN ISO 20753 E : 2014	PLASTICS - TEST SPECIMENS (ISO 20753:2008)
UNE EN ISO 15527 : 2014	PLASTICS - COMPRESSION-MOULDED SHEETS OF POLYETHYLENE (PE-UHMW, PE-HD) - REQUIREMENTS AND TEST METHODS (ISO 15527:2010)
EN ISO 9093-2 : 2002	SMALL CRAFT - SEACOCKS AND THROUGH-HULL FITTINGS - PART 2: NON-METALLIC
UNI EN 15860 : 2010	PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS
I.S. EN ISO 11296-7:2013	PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 7: LINING WITH SPIRALLY-WOUND PIPES (ISO 11296-7:2011)
16/30317348 DC : 0	BS EN 15860 - PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS
UNE EN ISO 11296-7 : 2014	PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 7: LINING WITH SPIRALLY-WOUND PIPES (ISO 11296-7:2011)
BS EN ISO 10350-1 : 2017	PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 1: MOULDING MATERIALS
(INACTIVE RECORD) DIN EN ISO 178:2013-09	PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010 + AMD.1:2013)
BS EN ISO 294-5 : 2017	PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS - PART 5: PREPARATION OF STANDARD SPECIMENS FOR INVESTIGATING ANISOTROPY (ISO 294-5:2017)
(INACTIVE RECORD) DIN EN ISO 12215-5:2014-10	SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION (ISO 12215-5:2008 + AMD 1:2014)
UNE EN ISO 294-5 : 2018	PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS - PART 5: PREPARATION OF STANDARD SPECIMENS FOR INVESTIGATING ANISOTROPY (ISO 294-5:2017)
DIN EN ISO 12215-5 E : 2014	SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION (ISO 12215-5:2008 + AMD 1:2014)
BS EN ISO 9093-2 : 2002	SMALL CRAFT - SEACOCKS AND THROUGH-HULL FITTINGS - PART 2: NON-METALLIC
ONORM EN ISO 12215-5 : 2014	SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION (ISO 12215-5:2008 + AMD 1:2014)
IEC 62642-2-73 : 1ED 2015	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-73: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACTIVE)
I.S. EN 50290-2-23:2013	COMMUNICATION CABLES - PART 2-23: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR MULTI-PAIR CABLES USED IN ACCESS TELECOMMUNICATION NETWORKS: OUTDOOR CABLES
ASTM D 5592 : 1994 : R2002 : EDT 1	Standard Guide for Material Properties Needed in Engineering Design Using Plastics
SAE J 2642 : 2017	RECOMMENDED PRACTICE FOR DEVELOPING SPECIFICATIONS FOR AUTOMOTIVE THERMOPLASTIC MATERIALS
NACE RP 03 04 : 2004	DESIGN, INSTALLATION, AND OPERATION OF THERMOPLASTIC LINERS FOR OILFIELD PIPELINES
NBR ISO 15814 : 2003	IMPLANTS FOR SURGERY - COPOLYMERS AND BLENDS BASED ON POLYLACTIDE - IN VITRO DEGRADATION TESTING
UNE EN ISO 12215-5 : 2008	SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION (ISO 12215-5:2008)
ASTM D 5857 : 2017 : REDLINE	Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology
BS EN ISO 12215-5 : 2008	SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION
ASTM D 5336 : 2015-04	CLASSIFICATION SYSTEM AND BASIS FOR SPECIFICATION FOR POLYPHTHALAMIDE (PPA) INJECTION MOLDING MATERIALS
CLC/TS 50131-2-7-1 : 2009	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-1: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACOUSTIC)
ISO TS 15869 : 2009	GASEOUS HYDROGEN AND HYDROGEN BLENDS - LAND VEHICLE FUEL TANKS
ASTM D 5575 : 2007 : R2013	Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers
EN ISO 11296-3 : 2011 COR 2011	PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES
ASTM D 6779 : 2017 : REDLINE	Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)
EN ISO 178 : 2010 AMD 1 2013	PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013)
NBR 15804-1 : JUN 2010	POLYMERIC MATERIALS FOR MEDICAL APPLICATIONS - PART 1: SPECIFICATION FOR POLYCARBONATE RESIN
UNE-EN 60079-7:2016	EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E'
ASTM D 5937 : 1996	Standard Test Method for Determination of Tensile Properties and Test Conditions for Moulding and Extrusion Plastics (Withdrawn 1998)
ASTM D 5592:1994	GUIDE FOR MATERIAL PROPERTIES NEEDED IN ENGINEERING DESIGN USING PLASTICS
ASTM D 5592 : 1994 : R2010	Standard Guide for Material Properties Needed in Engineering Design Using Plastics
ASTM D 6339 : 2011	Standard Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding and Extrusion (SPS)
ASTM D 5936 : 1996	Specification for Multipurpose Test Specimens (Withdrawn 1998)
ASTM D 4000 : 2016 : REDLINE	Standard Classification System for Specifying Plastic Materials
ASTM D 7436 : 2017 : REDLINE	Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology
ASTM D 5575 : 2007	Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers
ASTM D 5575:2007	CLASSIFICATION SYSTEM FOR COPOLYMERS OF VINYLIDENE FLUORIDE (VDF) WITH OTHER FLUORINATED MONOMERS
ASTM D 5927 : 2017 : REDLINE	Standard Classification System for and Basis for Specifications for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods
CSA C22.2 No. 0.17 : 2000	EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS
I.S. EN 14963:2006	ROOF COVERINGS - CONTINUOUS ROOFLIGHTS OF PLASTICS WITH OR WITHOUT UPSTANDS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS
I.S. EN ISO 899-1:2017	PLASTICS - DETERMINATION OF CREEP BEHAVIOUR - PART 1: TENSILE CREEP (ISO 899-1:2017)
ASTM D 5592 : 1994	Standard Guide for Material Properties Needed in Engineering Design Using Plastics
ASTM D 2581 : 2009-08	CLASSIFICATION SYSTEM FOR POLYBUTYLENE (PB) PLASTICS MOLDING AND EXTRUSION MATERIALS
DIN EN ISO 20753:2014-07	PLASTICS - TEST SPECIMENS (ISO 20753:2008)
UNE EN ISO 20753 : 2015	PLASTICS - TEST SPECIMENS (ISO 20753:2008)
ISO 7391-2 : 2006	PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 15860 : 2010	PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS
DIN EN ISO 25137-2 : 2016	PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 25137-2:2009)
ISO 21809-1 : 2011	PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 1: POLYOLEFIN COATINGS (3-LAYER PE AND 3-LAYER PP)
EN ISO 20753 : 2014	PLASTICS - TEST SPECIMENS (ISO 20753:2008)
I.S. EN ISO 12215-5:2008	SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION (ISO 12215-5:2008)
EN ISO 12215-5 : 2008 AMD 1 2014	SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION (ISO 12215-5:2008/AMD 1:2014)
DIN EN ISO 16396-1 E : 2015	PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM, MARKING OF PRODUCTS AND BASIS FOR SPECIFICATIONS (ISO 16396-1:2015)
DIN EN 15502-2-1:2013-01	GAS-FIRED CENTRAL HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B2, B3 AND B5 APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW
17/30339710 DC : 0	BS ISO 21138-3 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: PIPES AND FITTINGS WITH NON-SMOOTH EXTERNAL SURFACE, TYPE B
06/30144978 DC : DRAFT JAN 2006	EN ISO 15014 - PLASTICS - EXTRUDED SHEETS OF POLY(VINYLIDENE FLUORIDE) (PVDF) - REQUIREMENTS AND TEST METHODS
05/30132990 DC : DRAFT APR 2005	ISO 20753 - PLASTICS - TEST SPECIMENS
13/30240164 DC : 0	BS ISO 16365-1 - PLASTICS - THERMOPLASTIC POLYURETHANES FOR MOULDING AND EXTRUSION - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
10/30211370 DC : DRAFT JUNE 2010	BS ISO 11833-1 - PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM
17/30339707 DC : 0	BS ISO 21138-2 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 2: PIPES AND FITTINGS WITH SMOOTH EXTERNAL SURFACE, TYPE A
BS ISO 6402-2 : 94 AMD 10652
16/30334902 DC : 0	BS EN ISO 10350-1 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 1: MOULDING MATERIALS
10/30212123 DC : 0	BS EN 845-1 - SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 1: WALL TIES, TENSION STRAPS, HANGERS AND BRACKETS
I.S. EN ISO 21003-2:2008	MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 2: PIPES
I.S. EN 15860:2010	PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS
I.S. EN ISO 17855-2:2016	PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 17855-2:2016)
I.S. EN ISO 15015:2011	PLASTICS - EXTRUDED SHEETS OF IMPACT-MODIFIED ACRYLONITRILE-STYRENE COPOLYMERS (ABS, AEPDS AND ASA) - REQUIREMENTS AND TEST METHODS
ISO 16365-2 : 2014	PLASTICS - THERMOPLASTIC POLYURETHANES FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DNV APPROVAL SCHEME 2.9-1-501.9 : LATEST	DNV APPROVAL SCHEME - APPROVAL PROGRAMMES - COMPONENTS, MANUFACTURERS, SERVICE SUPPLIERS - TYPE APPROVAL PROGRAMME - POLYESTER- AND VINYLESTER RESINS, GELCOATS AND TOPCOATS
UNE EN ISO 25137-2 : 2017	PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 25137-2:2009)
UNE EN ISO 20028-2 : 2017	PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20028-2:2017)
ASTM F 2785 : 2012-09	SPECIFICATION FOR POLYAMIDE 12 GAS PRESSURE PIPE, TUBING, AND FITTINGS
UNI EN ISO 15527 : 2013	PLASTICS - COMPRESSION-MOULDED SHEETS OF POLYETHYLENE (PE-UHMW, PE-HD) - REQUIREMENTS AND TEST METHODS
ISO 9093-2 : 2002(R2010)	SMALL CRAFT - SEACOCKS AND THROUGH-HULL FITTINGS - PART 2: NON-METALLIC
EN ISO 11296-7 : 2013	PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 7: LINING WITH SPIRALLY-WOUND PIPES (ISO 11296-7:2011)
ISO 7628 : 2010(R2015)	ROAD VEHICLES - THERMOPLASTICS TUBING FOR AIR BRAKING SYSTEMS
ISO 15439-1 : 2007	PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 0,4 MPA (4 BAR) - POLYAMIDE (PA) - PART 1: GENERAL
ISO 21809-4 : 2009(R2016)	PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 4: POLYETHYLENE COATINGS (2-LAYER PE)
EN ISO 7391-2 : 2006	PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 11833-1 E : 2012	PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM (ISO 11833-1:2012)
EN ISO 1797 : 2017	DENTISTRY - SHANKS FOR ROTARY AND OSCILLATING INSTRUMENTS (ISO 1797:2017)
EN ISO 20029-2 : 2018	PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMEN AND DETERMINATION OF PROPERTIES (ISO 20029-2:2017)
ISO 17282 : 2004(R2017)	PLASTICS - GUIDE TO THE ACQUISITION AND PRESENTATION OF DESIGN DATA
(INACTIVE RECORD) DIN EN ISO 6224:2012-02	THERMOPLASTICS HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION (ISO 6224:2011)
EN 50465 : 2015	GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW
ASTM D 4066 : 2013	Standard Classification System for Nylon Injection and Extrusion Materials (PA)
ASTM F 2945 : 2015-05	SPECIFICATION FOR POLYAMIDE 11 GAS PRESSURE PIPE, TUBING, AND FITTINGS
ASTM F 2902 : 2017-01	GUIDE FOR ASSESSMENT OF ABSORBABLE POLYMERIC IMPLANTS
ASTM D 6865 : 2017 : REDLINE	Standard Classification System and Basis for Specifications for Acrylonitrile–Styrene–Acrylate (ASA) and Acrylonitrile–EPDM–Styrene (AES) Plastics and Alloys Molding and Extrusion Materials
ISO 6691 : 2000(R2018)	THERMOPLASTIC POLYMERS FOR PLAIN BEARINGS - CLASSIFICATION AND DESIGNATION
ISO 294-5 : 2017	PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS - PART 5: PREPARATION OF STANDARD SPECIMENS FOR INVESTIGATING ANISOTROPY
IEC 60079-0 REDLINE : 7.0	EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
ISO 4586-4 : 2015	HIGH-PRESSURE DECORATIVE LAMINATES (HPL, HPDL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 4: CLASSIFICATION AND SPECIFICATIONS FOR COMPACT LAMINATES OF THICKNESS 2 MM AND GREATER
IEC 61234-2 : 1.0	ELECTRICAL INSULATING MATERIALS - METHODS OF TEST FOR THE HYDROLYTIC STABILITY - PART 2: MOULDED THERMOSETS
DIN EN 295-3:2012-03	VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 3: TEST METHODS
S.R. CEN/TS 15534-2:2007	WOOD-PLASTICS COMPOSITES (WPC) - PART 2: CHARACTERISATION OF WPC MATERIALS
(INACTIVE RECORD) DIN EN 10245-1:2012-01	STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES
ISO 4586-8 : 2015	HIGH-PRESSURE DECORATIVE LAMINATES (HPL, HPDL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 8: CLASSIFICATION AND SPECIFICATIONS FOR ALTERNATIVE CORE LAMINATES
I.S. EN ISO 22088-6:2009	PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 6: SLOW STRAIN RATE METHOD
DIN EN ISO 11963 E : 2013	PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS (ISO 11963:2012)
ISO 899-1 : 2017	PLASTICS - DETERMINATION OF CREEP BEHAVIOUR - PART 1: TENSILE CREEP
VDI 3405-1 : 2013	ADDITIVE MANUFACTURING PROCESSES, RAPID MANUFACTURING - LASER SINTERING OF POLYMER PARTS - QUALITY CONTROL
I.S. EN 15542:2008	DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL CEMENT MORTAR COATING FOR PIPES - REQUIREMENTS AND TEST METHODS
I.S. EN ISO 8986-2:2009	PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
IEC 62642-2-72 : 1ED 2015	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-72: INTRUSION DETECTORS - GLASS BREAK DETECTORS (PASSIVE)
IEC 61241-1-1 : 2.0	ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1-1 - ELECTRICAL APPARATUS PROTECTED BY ENCLOSURES AND SURFACE TEMPERATURE LIMITATION - SPECIFICATION FOR APPARATUS
UNE EN 15860 : 2011	PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS
ISO 17194 : 2007(R2015)	STRUCTURAL ADHESIVES - A STANDARD DATABASE OF PROPERTIES
I.S. EN 50465:2015	GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW
ISO 1268-11 : 2005(R2019)	FIBRE-REINFORCED PLASTICS - METHODS OF PRODUCING TEST PLATES - PART 11: INJECTION MOULDING OF BMC AND OTHER LONG-FIBRE MOULDING COMPOUNDS - SMALL PLATES
IEC 62899-201 : 1ED 2016	PRINTED ELECTRONICS - PART 201: MATERIALS - SUBSTRATES
IEC 60079-7:2015-06+AMD1:2017-08 CSV	EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E'
IEC 60079-7:2015+AMD1:2017 CSV	EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E'
I.S. EN ISO 11963:2012	PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS (ISO 11963:2012)
I.S. EN ISO 11833-1:2012	PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM (ISO 11833-1:2012)
I.S. EN 12566-3:2016	SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 3: PACKAGED AND/OR SITE ASSEMBLED DOMESTIC WASTEWATER TREATMENT PLANTS
ISO 21809-3 : 2016	PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS
EN 60079-7 : 2015 AMD 1 2018	EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' (IEC 60079-7:2015/A1:2017)
EN ISO 13628-11 : 2008 COR 2009	PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 11: FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
UNE EN ISO 21809-1 : 2019	PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 1: POLYOLEFIN COATINGS (3-LAYER PE AND 3-LAYER PP) (ISO 21809-1:2011)
DIN EN ISO 22088-4:2006-11	PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 4: BALL OR PIN IMPRESSION METHOD
DIN EN 12245:2012-03	TRANSPORTABLE GAS CYLINDERS - FULLY WRAPPED COMPOSITE CYLINDERS
DIN EN ISO 3672-2 E : 2002	PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN 263 E : 2008	SANITARY APPLIANCES - CROSSLINKED CAST ACRYLIC SHEETS FOR BATHS AND SHOWER TRAYS FOR DOMESTIC PURPOSES
EN ISO 13628-2 : 2006 COR 2009	PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
DIN EN 1873 E : 2016	PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS - PRODUCT SPECIFICATION AND TEST METHODS
DIN EN 13566-7:2007-06	PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 7: LINING WITH SPIRALLY-WOUND PIPES
DIN EN 1504-5 E : 2013	PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION
DIN EN ISO 1874-2:2013-03	PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 1874-2:2012)
DIN EN ISO 22088-2:2006-11	PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 2: CONSTANT TENSILE LOAD METHOD
DIN EN 13200-4:2006-12	SPECTATOR FACILITIES - PART 4: SEATS, PRODUCT CHARACTERISTICS
(INACTIVE RECORD) DIN EN 1873:2016-07	PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS - PRODUCT SPECIFICATION AND TEST METHODS
DIN EN ISO 8986-2 E : 2010	PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN 13575 E : 2012	STATIC THERMOPLASTIC TANKS FOR THE ABOVE GROUND STORAGE OF CHEMICALS - BLOW MOULDED OR ROTATIONALLY MOULDED POLYETHYLENE TANKS - REQUIREMENTS AND TEST METHODS
DIN EN ISO 6402-2 E : 2004	PLASTICS - ACRYLONITRILE-STYRENE-ACRYLATE (ASA), ACRYLONITRILE-(ETHYLENE-PROPYLENE-DIENE)-STYRENE (AEPDS) AND ACRYLONITRILE-(CHLORINATED POLYETHYLENE)-STYRENE (ACS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 7391-2 E : 2006	PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 15013 E : 2008	PLASTICS - EXTRUDED SHEETS OF POLYPROPYLENE (PP) - REQUIREMENTS AND TEST METHODS
DIN EN 13566-2:2006-02	PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 2: LINING WITH CONTINUOUS PIPES
DIN EN ISO 2897-2 E : 2004	PLASTICS - IMPACT-RESISTANT POLYSTYRENE (PS-I) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN 89:2015-08	GAS-FIRED STORAGE WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER
DIN EN ISO 11439 E : 2013	GAS CYLINDERS - HIGH PRESSURE CYLINDERS FOR THE ON-BOARD STORAGE OF NATURAL GAS AS A FUEL FOR AUTOMOTIVE VEHICLES (ISO 11439:2013)
DIN EN ISO 22088-3:2006-11	PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 3: BENT STRIP METHOD
DIN EN ISO 23667:2007-10	PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - RIGID PLASTICS AND PLASTICS COMPOSITE IBCS - COMPATIBILITY TESTING
DIN EN 13341 : 2011	STATIC THERMOPLASTIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, KEROSENE AND DIESEL FUELS - BLOW MOULDED AND ROTATIONALLY MOULDED POLYETHYLENE TANKS AND ROTATIONALLY MOULDED TANKS MADE OF ANIONICALLY POLYMERIZED POLYAMIDE 6 - REQUIREMENTS AND TEST METHODS
DIN EN 12245 E : 2012	TRANSPORTABLE GAS CYLINDERS - FULLY WRAPPED COMPOSITE CYLINDERS (INCLUDES AMENDMENT A1:2011)
DIN EN ISO 15103-2:2007-09	PLASTICS - POLY(PHENYLENE ETHER) (PPE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 11403-1 E : 2003	PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 1: MECHANICAL PROPERTIES (ISO 11403-1:2014)
DIN EN ISO 14663-2 E : 2006	PLASTICS - ETHYLENE/VINYL ALCOHOL (EVOH) COPOLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 4613-2:2004-12	PLASTICS - ETHYLENE/VINYL ACETATE (E/VAC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 3673-2 E : 2012	PLASTICS - EPOXY RESINS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES OF CROSSLINKED EPOXY RESINS (ISO 3673-2:2012)
DIN EN 483 E : 2000	GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW
DIN EN 26:2015-08	GAS-FIRED INSTANTANEOUS WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER
DIN EN ISO 8257-2 E : 2006	PLASTICS - POLY(METHYL METHACRYLATE) (PMMA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
(INACTIVE RECORD) DIN EN ISO 11439:2013-09	GAS CYLINDERS - HIGH PRESSURE CYLINDERS FOR THE ON-BOARD STORAGE OF NATURAL GAS AS A FUEL FOR AUTOMOTIVE VEHICLES (ISO 11439:2013)
DIN EN 1825-1 E : 2004	GREASE SEPARATORS - PART 1: PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL
DIN EN ISO 6259-1 E : 2002	THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL TEST METHOD
DIN EN 10245-1 E : 2012	STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES
DIN EN ISO 2580-2 E : 2004	PLASTICS - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN 13575:2012-06	STATIC THERMOPLASTIC TANKS FOR THE ABOVE GROUND STORAGE OF CHEMICALS - BLOW MOULDED OR ROTATIONALLY MOULDED POLYETHYLENE TANKS - REQUIREMENTS AND TEST METHODS
(INACTIVE RECORD) DIN EN ISO 15526-2:2004-10	PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 6224 E : 2012	THERMOPLASTICS HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION (ISO 6224:2011)
DIN EN ISO 15103-2 E : 2007	PLASTICS - POLY(PHENYLENE ETHER) (PPE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 13000-2 E : 2006	PLASTICS - POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 2898-2 E : 2009	PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 4613-2 E : 2004	PLASTICS - ETHYLENE/VINYL ACETATE (E/VAC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 7792-2:2013-03	PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 7792-2:2012)
DIN EN ISO 10366-2:2004-05	PLASTICS - METHYL METHACRYLATE-ACRYLONITRILE-BUTADIENE-STYRENE (MABS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN 607 E : 2005	EAVES GUTTERS AND FITTINGS MADE OF PVC-U - DEFINITIONS, REQUIREMENTS AND TESTING
DIN EN 858-1 E : 2002	CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - PART 1: SAFETY AND EMC REQUIREMENTS FOR THE EQUIPMENT FOR THE STORAGE OF BULK MATERIALS IN SILOS, BUNKERS, BINS AND HOPPERS
DIN EN 1504-5:2013-06	PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION
DIN EN ISO 7823-1:2003-12	PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: CAST SHEETS
(INACTIVE RECORD) DIN EN 263:2008-06	SANITARY APPLIANCES - CROSSLINKED CAST ACRYLIC SHEETS FOR BATHS AND SHOWER TRAYS FOR DOMESTIC PURPOSES
DIN EN 13200-4 E : 2006	SPECTATOR FACILITIES - PART 4: SEATS - PRODUCT CHARACTERISTICS
DIN EN ISO 7823-2 E : 2003	PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 2: EXTRUDED SHEETS
DIN EN 607:2005-02	EAVES GUTTERS AND FITTINGS MADE OF PVC-U - DEFINITIONS, REQUIREMENTS AND TESTING
DIN EN ISO 16103:2005-09