BS ISO 7870-3:2012
|
Control charts Acceptance control charts |
CEI EN 62058-11 : 2011
|
ELECTRICITY METERING EQUIPMENT (A/C/) - ACCEPTANCE INSPECTION - PART 11: GENERAL ACCEPTANCE INSPECTION METHODS |
BS ISO 12289:2016
|
Aerospace. Rivets, solid, in corrosion-resisting steel. Procurement specification |
BS ISO 7689:2008
|
Aerospace. Bolts, with MJ threads, made of alloy steel, strength class 1100 MPa. Procurement specification |
BS ISO 6565:2011
|
Tobacco and tobacco products. Draw resistance of cigarettes and pressure drop of filter rods. Standard conditions and measurement |
ISO 15472:2010
|
Surface chemical analysis X-ray photoelectron spectrometers Calibration of energy scales |
ISO 7870-5:2014
|
Control charts — Part 5: Specialized control charts |
DIN EN ISO 13161:2016-01
|
WATER QUALITY - MEASUREMENT OF POLONIUM 210 ACTIVITY CONCENTRATION IN WATER BY ALPHA SPECTROMETRY (ISO 13161:2011) |
ISO 39511:2018
|
Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation) |
ISO 22514-7:2012
|
Statistical methods in process management Capability and performance Part 7: Capability of measurement processes |
ISO 8168:2016
|
Aerospace — Bolts, with MJ threads, made of heat and corrosion resisting steel, strength class 1 100 MPa — Procurement specification |
ISO 5857:2008
|
Aerospace Bolts, with MJ threads, made of alloy steel, strength class 1 250 MPa Procurement specification |
BS ISO 8641:2008
|
Aerospace. Self-locking nuts with maximum operating temperature greater than 425 °C. Procurement specification |
BS EN 62058-11:2010
|
Electricity metering equipment (a.c.). Acceptance inspection General acceptance inspection methods |
10/30209804 DC : 0
|
BS ISO 7870-4 - CONTROL CHARTS - PART 4: CUMULATIVE SUM CHARTS |
UNI ISO 7870-4 : 2014
|
CONTROL CHARTS - PART 4: CUMULATIVE SUM CHARTS |
BS 5703(2011) : 2011
|
CONTROL CHARTS - PART 4: CUMULATIVE SUM CHARTS |
BS ISO 22514-7:2012
|
Statistical methods in process management. Capability and performance Capability of measurement processes |
BS ISO 8423:2008
|
Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation) |
ISO 9154:2016
|
Aerospace — Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa — Procurement specification |
BS ISO 7870-6:2016
|
Control charts EWMA Control Charts |
ISO 6565:2015
|
Tobacco and tobacco products — Draw resistance of cigarettes and pressure drop of filter rods — Standard conditions and measurement |
UNE-ISO 7870-3:2017
|
Control charts -- Part 3: Acceptance control charts |
UNE-EN 62058-11:2011
|
Electricity metering equipment (a.c.) - Acceptance inspection -- Part 11: General acceptance inspection methods |
ISO 22514-3:2008
|
Statistical methods in process management Capability and performance Part 3: Machine performance studies for measured data on discrete parts |
BS ISO 16055:2012
|
Tobacco and tobacco products. Monitor test piece. Requirements and use |
ISO 23830:2008
|
Surface chemical analysis — Secondary-ion mass spectrometry — Repeatability and constancy of the relative-intensity scale in static secondary-ion mass spectrometry |
UNI ISO 7870-3 : 2014
|
CONTROL CHARTS - PART 3: ACCEPTANCE CONTROL CHARTS |
IEC 62058-11:2008
|
Electricity metering equipment (AC) - Acceptance inspection - Part 11: General acceptance inspection methods |
EN ISO 13161:2015
|
Water quality - Measurement of polonium 210 activity concentration in water by alpha spectrometry (ISO 13161:2011) |
UNI ISO/TR 18532 : 2010
|
Guide to the application of statistical methods for quality and standardization in the industrial sector |
BS EN ISO 13161:2015
|
Water quality. Measurement of polonium 210 activity concentration in water by alpha spectrometry |
BS ISO 8168:2008
|
Aerospace. Bolts, with MJ threads, made of heat and corrosion resisting steel, strength class 1100 MPa. Procurement specification |
BS ISO 9154:2016
|
Aerospace. Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa. Procurement specification |
11/30208254 DC : 0
|
BS ISO 7870-2 - CONTROL CHARTS - PART 2: SHEWHART CONTROL CHARTS |
15/30328590 DC : 0
|
BS ISO 8168 - AEROSPACE - BOLTS, WITH MJ THREADS, MADE OF HEAT AND CORROSION RESISTING STEEL, STRENGTH CLASS 1100 MPA - PROCUREMENT SPECIFICATION |
PD ISO/TR 22514-4:2007
|
Statistical methods in process management. Capability and performance Process capability estimates and performance measures |
ISO/TR 18532:2009
|
Guidance on the application of statistical methods to quality and to industrial standardization |
BS ISO 22514-4:2016
|
Statistical methods in process management. Capability and performance Process capability estimates and performance measures |
BS ISO 5857:2008
|
Aerospace. Bolts, with MJ threads, made of alloy steel, strength class 1250 MPa. Procurement specification |
09/30142128 DC : 0
|
BS ISO 11462-2 - GUIDELINES FOR IMPLEMENTATION OF STATISTICAL PROCESS CONTROL (SPC) - PART 2: CATALOGUE OF TOOLS AND TECHNIQUES |
IEC 62754:2017
|
Computation of waveform parameter uncertainties |
BS ISO 7870-8:2017
|
Control charts Charting techniques for short runs and small mixed batches |
10/30142131 DC : 0
|
BS ISO 7870-3 - CONTROL CHARTS - PART 3: PROCESS ACCEPTANCE CONTROL CHARTS |
I.S. EN 62058-11:2010
|
ELECTRICITY METERING EQUIPMENT (A.C.) - ACCEPTANCE INSPECTION - PART 11: GENERAL ACCEPTANCE INSPECTION METHODS |
15/30318691 DC : 0
|
BS ISO 22514-5 - STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 5: PROCESS CAPABILITY ESTIMATES AND PERFORMANCE FOR ATTRIBUTIVE CHARACTERISTICS |
DIN ISO 16055:2015-12
|
Tobacco and tobacco products - Monitor test piece - Requirements and use (ISO 16055:2012) |
EN 62754:2017
|
Computation of waveform Parameter uncertainties |
UNE-ISO 16055:2016
|
Tobacco and tobacco products. Monitor test piece . Requirements and use. |
UNI ISO 22514-7:2014
|
STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 7: CAPABILITY OF MEASUREMENT PROCESSES |
ISO 7870-6:2016
|
Control charts Part 6: EWMA control charts |
ISO 7870-8:2017
|
Control charts — Part 8: Charting techniques for short runs and small mixed batches |
ISO 13161:2011
|
Water quality Measurement of polonium 210 activity concentration in water by alpha spectrometry |
UNI ISO 13053-2 : 2014
|
QUANTITATIVE METHODS IN PROCESS IMPROVEMENT - SIX SIGMA - PART 2: TOOLS AND TECHNIQUES |
14/30294683 DC : 0
|
BS ISO 6565 - TOBACCO AND TOBACCO PRODUCTS - DRAW RESISTANCE OF CIGARETTES AND PRESSURE DROP OF FILTER RODS - STANDARD CONDITIONS AND MEASUREMENT |
BS ISO 13053-2:2011
|
Quantitative methods in process improvement. Six Sigma Tools and techniques |
14/30314227 DC : 0
|
BS ISO 22514-4 - STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 4: PROCESS CAPABILITY ESTIMATES AND PERFORMANCE MEASURES |
12/30271500 DC : 0
|
BS ISO GUIDE 80 - GUIDANCE FOR IN-HOUSE PRODUCTION OF REFERENCE MATERIALS FOR QUALITY CONTROL (QCMS) |
ISO 7870-3:2012
|
Control charts Part 3: Acceptance control charts |
UNI ISO 11462-2 : 2014
|
GUIDELINES FOR IMPLEMENTATION OF STATISTICAL PROCESS CONTROL (SPC) - PART 2: CATALOGUE OF TOOLS AND TECHNIQUES |
UNI ISO 22514-3 : 2010
|
STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 3: MACHINE PERFORMANCE STUDIES FOR MEASURED DATA ON DISCRETE PARTS |
DIN EN ISO 13161 E : 2016
|
WATER QUALITY - MEASUREMENT OF POLONIUM 210 ACTIVITY CONCENTRATION IN WATER BY ALPHA SPECTROMETRY (ISO 13161:2011) |
13/30285104 DC : 0
|
BS ISO 7870-6 - STATISTICAL METHODS IN PROCESS MANAGEMENT - CONTROL CHARTS - PART 6: EWMA CONTROL CHARTS |
ISO Guide 80:2014
|
Guidance for the in-house preparation of quality control materials (QCMs) |
I.S. EN ISO 13161:2015
|
WATER QUALITY - MEASUREMENT OF POLONIUM 210 ACTIVITY CONCENTRATION IN WATER BY ALPHA SPECTROMETRY (ISO 13161:2011) |
ISO 22514-4:2016
|
Statistical methods in process management Capability and performance Part 4: Process capability estimates and performance measures |
BS ISO 15472:2010
|
Surface chemical analysis. X-ray photoelectron spectrometers. Calibration of energy scales |
ISO 12289:2016
|
Aerospace Rivets, solid, in corrosion-resisting steel Procurement specification |
ISO 11462-2:2010
|
Guidelines for implementation of statistical process control (SPC) — Part 2: Catalogue of tools and techniques |
UNE-ISO 6565:2012
|
Tobacco and tobacco products -- Draw resistance of cigarettes and pressure drop of filter rods -- Standard conditions and measurement |
UNE-EN ISO 13161:2016
|
Water quality - Measurement of polonium 210 activity concentration in water by alpha spectrometry (ISO 13161:2011) |
ISO 13053-2:2011
|
Quantitative methods in process improvement — Six Sigma — Part 2: Tools and techniques |
UNE-ISO 13053-2:2012
|
Quantitative methods in process improvement -- Six Sigma -- Part 2: Tools and techniques |
BS ISO 7870-4:2011
|
Control charts Cumulative sum charts |
UNI ISO/TR 22514-4 : 2010
|
STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 4: PROCESS CAPABILITY ESTIMATES AND PERFORMANCE MEASURES |
ISO 8423:2008
|
Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation) |
BS EN 62754:2017
|
Computation of waveform parameter uncertainties |
BS ISO 23830:2008
|
Surface chemical analysis. Secondary-ion mass spectrometry. Repeatability and constancy of the relative-intensity scale in static secondary-ion mass spectrometry |
BS ISO 7870-5:2014
|
Control charts Specialized control charts |
12/30058092 DC : 0
|
BS ISO 7870-5 - CONTROL CHARTS - PART 5: SPECIALIZED CONTROL CHARTS |
BS ISO 22514-3:2008
|
Statistical methods in process management. Capability and performance Machine performance studies for measured data on discrete parts |
BIS IS 15471 : 2012
|
AEROSPACE - SELF-LOCKING NUTS WITH MAXIMUM OPERATING TEMPERATURE GREATER THAN 425 DEGREES C - PROCUREMENT SPECIFICATION |
UNI ISO 7870-5 : 2014
|
CONTROL CHARTS - PART 5: SPECIALIZED CONTROL CHARTS |
ISO/TR 22514-4:2007
|
Statistical methods in process management Capability and performance Part 4: Process capability estimates and performance measures |
ISO 7689:2008
|
Aerospace Bolts, with MJ threads, made of alloy steel, strength class 1 100 MPa Procurement specification |
I.S. EN 62754:2017
|
COMPUTATION OF WAVEFORM PARAMETER UNCERTAINTIES |
ISO 8641:2008
|
Aerospace — Self-locking nuts with maximum operating temperature greater than 425 degrees C — Procurement specification |
ISO 7870-4:2011
|
Control charts Part 4: Cumulative sum charts |
EN 62058-11:2010
|
Electricity metering equipment (a.c.) - Acceptance inspection - Part 11: General acceptance inspection methods |