I.S. EN ISO 6142-1:2015
|
GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES - PART 1: GRAVIMETRIC METHOD FOR CLASS 1 MIXTURES (ISO 6142-1:2015) |
DIN EN ISO 6142-1 E : 2015
|
GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES - PART 1: GRAVIMETRIC METHOD FOR CLASS I MIXTURES (ISO 61421:2015) |
10/30215322 DC : 0
|
BS EN ISO 6974-1 - NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION |
05/30136954 DC : 0
|
EN 15309 - CHARACTERIZATION OF WASTE AND SOIL - DETERMINATION OF ELEMENTAL COMPOSITION BY X-RAY FLUORESCENCE |
DIN EN ISO/IEC 17043 E : 2010
|
CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING |
ISO/TR 11773:2013
|
Global distribution of reference materials |
BS EN ISO/IEC 17043:2010
|
Conformity assessment. General requirements for proficiency testing |
BS EN 15309:2007
|
Characterization of waste and soil. Determination of elemental composition by X-ray fluorescence |
11/30199166 DC : 0
|
BS ISO 11952 - SURFACE CHEMICAL ANALYSIS - SCANNING PROBE MICROSCOPY - DETERMINATION OF GEOMETRIC QUANTITIES USING SPM - CALIBRATION OF MEASURING SYSTEMS |
OIML D 18 : 2008
|
THE USE OF CERTIFIED REFERENCE MATERIALS IN FIELDS COVERED BY METROLOGICAL CONTROL EXERCISED BY NATIONAL SERVICES OF LEGAL METROLOGY. BASIC PRINCIPLES |
13/30272291 DC : 0
|
BS ISO 18227 - SOIL QUALITY - DETERMINATION OF ELEMENTAL COMPOSITION BY X-RAY FLUORESCENCE |
11/30214536 DC : 0
|
BS EN ISO 13736 - DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD |
03/300854 DC : DRAFT JAN 2003
|
ISO 3679 - DETERMINATION OF FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD |
07/30157023 DC : 0
|
BS EN ISO 15194 - IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
08/30182372 DC : DRAFT JULY 2008
|
BS EN 15842 - FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
ECA ILAC P10 : 2013
|
ILAC POLICY ON TRACEABILITY OF MEASUREMENT RESULTS |
BS EN ISO 6142-1:2015
|
Gas analysis. Preparation of calibration gas mixtures Gravimetric method for Class I mixtures |
ISO Guide 31:2015
|
Reference materials — Contents of certificates, labels and accompanying documentation |
BS ISO 18227:2014
|
Soil quality. Determination of elemental composition by X-ray fluorescence |
ASTM E 1834 : 2011
|
Standard Test Method for Analysis of Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry |
ASTM E 2437 : 2005
|
Standard Practice for Designing and Validating Performance-Based Test Methods for the Analysis of Metals, Ores, and Related Materials (Withdrawn 2014) |
PREN ISO 13736 : DRAFT 2011
|
DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD |
CEI UNI 70099 : 2010
|
INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
UNE-EN ISO/IEC 17043:2010
|
Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010) |
CEI UNI EN ISO/IEC 17025 : 2008
|
GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
ASTM D 93 : 2016-07
|
TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER |
ASTM E 925 : 2009
|
Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does not Exceed 2 nm |
ASTM E 2594 : 2009
|
Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Method) |
I.S. EN ISO 15194:2009
|
IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
EN ISO 5667-3:2012
|
Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO 5667-3:2012) |
ASTM E 2594 : 2009 : R2014
|
Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Method) |
ASTM E 2371 : 2013
|
Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology) |
DIN EN ISO 17932:2011-12
|
Palm oil - Determination of the deterioration of bleachability index (DOBI) and carotene content (ISO 17932:2011) |
DIN EN ISO 6974-2 E : 2012
|
NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 2: UNCERTAINTY CALCULATIONS (ISO 6974-2:2012) |
DIN EN ISO 10993-12 E : 2012
|
BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION AND REFERENCE MATERIALS (ISO 10993-12:2012) |
ISO 6974-1:2012
|
Natural gas — Determination of composition and associated uncertainty by gas chromatography — Part 1: General guidelines and calculation of composition |
BS EN ISO 10993-12:2012
|
Biological evaluation of medical devices Sample preparation and reference materials |
ISO/IEC 17043:2010
|
Conformity assessment — General requirements for proficiency testing |
UNE-EN ISO 13736:2013
|
Determination of flash point - Abel closed-cup method (ISO 13736:2013) |
DIN EN ISO 13366-2:2007-01
|
Milk - Enumeration of somatic cells - Part 2: Guidance on the operation of fluoro-opto-electronic counters (ISO 13366-2:2006) |
EN ISO 2719:2016
|
Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
EN ISO 13366-2:2006/AC:2007
|
MILK - ENUMERATION OF SOMATIC CELLS - PART 2: GUIDANCE ON THE OPERATION OF FLUORO-OPTO-ELECTRONIC COUNTERS |
DIN EN ISO 148-3:2017-04
|
METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 3: PREPARATION AND CHARACTERIZATION OF CHARPY V-NOTCH TEST PIECES FOR INDIRECT VERIFICATION OF PENDULUM IMPACT MACHINES (ISO 148-3:2016) |
EN ISO 148-3:2016
|
Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2016) |
UNI EN ISO 10993-12 : 2012
|
BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION AND REFERENCE MATERIALS |
ISO/TR 79:2015
|
Reference materials - Examples of reference materials for qualitative properties |
PD ISO/TR 13014:2012
|
Nanotechnologies. Guidance on physico-chemical characterization of engineered nanoscale materials for toxicologic assessment |
10/30201950 DC : 0
|
BS EN ISO 5667-3 - WATER QUALITY - SAMPLING - PART 3: PRESERVATION AND HANDLING OF WATER SAMPLES |
12/30237514 DC : 0
|
BS ISO 13528 - STATISTICAL METHODS FOR USE IN PROFICIENCY TESTING BY INTERLABORATORY COMPARISONS |
BS ISO 14606:2015
|
Surface chemical analysis. Sputter depth profiling. Optimization using layered systems as reference materials |
09/30179503 DC : DRAFT FEB 2009
|
BS ISO 29301 - MICROBEAM ANALYSIS - ANALYTICAL TRANSMISSION ELECTRON MICROSCOPY - METHODS FOR CALIBRATING IMAGE MAGNIFICATION BY USING REFERENCE MATERIALS GIVING A PERIODIC DIFFRACTION PATTERN |
UNI EN 15842 : 2010
|
FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
10/30203803 DC : 0
|
BS ISO 6974-2 - NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 2: UNCERTAINTY CALCULATIONS |
BS EN ISO 15193:2009
|
In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Requirements for content and presentation of reference measurement procedures |
OIML V 2-200 : 2012
|
INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
03/300855 DC : DRAFT JAN 2003
|
ISO 3680 - DETERMINATION OF FLASH/NO FLASH - RAPID EQUILIBRIUM CLOSED CUP METHOD |
DIN EN 15309 E : 2007
|
CHARACTERIZATION OF WASTE AND SOIL - DETERMINATION OF ELEMENTAL COMPOSITION BY X-RAY FLUORESCENCE |
BS 2000-524(2004) : 2004
|
METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-524: DETERMINATION OF FLASH/NO FLASH - RAPID EQUILIBRIUM CLOSED CUP METHOD |
14/30250844 DC : 0
|
BS EN ISO 6142-1 - GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES - PART 1: GRAVIMETRIC METHOD FOR CLASS 1 MIXTURES |
UNI CEN/TR 10317 : 2009
|
EUROPEAN CERTIFIED REFERENCE MATERIALS (EURONORM-CRMS) FOR THE DETERMINATION OF THE CHEMICAL COMPOSITION OF IRON AND STEEL PRODUCTS PREPARED UNDER THE AUSPICES OF THE EUROPEAN COMMITTEE FOR IRON AND STEEL STANDARDIZATION |
DIN EN ISO 6142-1:2015-12
|
GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES - PART 1: GRAVIMETRIC METHOD FOR CLASS I MIXTURES (ISO 6142-1:2015) |
DIN EN 15842:2010-06
|
FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
PD ISO GUIDE 33:2015
|
Reference materials. Good practice in using reference materials |
BS ISO 13322-1:2014
|
Particle size analysis. Image analysis methods Static image analysis methods |
BS 2000-170(1998) : 1998
|
METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS AND OTHER LIQUIDS - DETERMINATION OF FLASH POINT - ABEL CLOSED CUP METHOD |
BS ISO 16700:2004
|
Microbeam analysis. Scanning electron microscopy. Guidelines for calibrating image magnification |
ISO 13322-1:2014
|
Particle size analysis — Image analysis methods — Part 1: Static image analysis methods |
UNI EN ISO 5667-3 : 2013
|
WATER QUALITY - SAMPLING - PART 3: PRESERVATION AND HANDLING OF WATER SAMPLES |
I.S. EN ISO 17932:2011
|
PALM OIL - DETERMINATION OF THE DETERIORATION OF BLEACHABILITY INDEX (DOBI) AND CAROTENE CONTENT (ISO 17932:2011) |
NF ISO 16700 : 2006
|
MICROBEAM ANALYSIS - SCANNING ELECTRON MICROSCOPY - GUIDELINES FOR CALIBRATING IMAGE MAGNIFICATION |
I.S. EN ISO 148-3:2016
|
METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 3: PREPARATION AND CHARACTERIZATION OF CHARPY V-NOTCH TEST PIECES FOR INDIRECT VERIFICATION OF PENDULUM IMPACT MACHINES (ISO 148-3:2016) |
BS 2000-34(2016) : 2016
|
DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD (ISO 2719:2016) |
EN ISO 2592:2017
|
Petroleum and related products - Determination of flash and fire points - Cleveland open cup method (ISO 2592:2017) |
UNI EN ISO 13736 : 2013
|
DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD |
ASTM E 925 : 2009 : R2014
|
Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Bandwidth does not Exceed 2 nm |
DIN EN ISO 10993-12:2012-10
|
Biological evaluation of medical devices - Part 12: Sample preparation and reference materials (ISO 10993-12:2012) |
DIN EN ISO 6974-1:2012-11
|
Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 1: General guidelines and calculation of composition (ISO 6974-1:2012) |
DIN EN ISO 6974-2:2012-11
|
Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 2: Uncertainty calculations (ISO 6974-2:2012) |
BS EN ISO 13366-2:2006
|
Milk. Enumeration of somatic cells Guidance on the operation of fluoro-opto-electronic counters |
I.S. EN ISO 6974-1:2012
|
NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION (ISO 6974-1:2012) |
I.S. EN ISO 10723:2012
|
NATURAL GAS - PERFORMANCE EVALUATION FOR ANALYTICAL SYSTEMS (ISO 10723:2012) |
I.S. EN ISO 13736:2013
|
DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD (ISO 13736:2013) |
I.S. EN ISO 13366-2:2006
|
MILK - ENUMERATION OF SOMATIC CELLS - PART 2: GUIDANCE ON THE OPERATION OF FLUORO-OPTO-ELECTRONIC COUNTERS |
I.S. EN ISO 6974-2:2012
|
NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 2: UNCERTAINTY CALCULATIONS (ISO 6974-2:2012) |
DIN EN ISO 10723:2013-04
|
NATURAL GAS - PERFORMANCE EVALUATION FOR ANALYTICAL SYSTEMS (ISO 10723:2012) |
I.S. EN ISO 10993-12:2012
|
BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION AND REFERENCE MATERIALS (ISO 10993-12:2012) |
I.S. EN ISO 2719:2016
|
DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD (ISO 2719:2016) |
I.S. EN ISO 3679:2015
|
DETERMINATION OF FLASH NO-FLASH AND FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD (ISO 3679:2015) |
PD 6532-2:2000
|
Reference materials. Guide to the contents of certificates of reference materials Guide to the contents of certificates and labels of reference materials |
17/30346182 DC : 0
|
BS ISO 29301 - MICROBEAM ANALYSIS - ANALYTICAL TRANSMISSION ELECTRON MICROSCOPY - METHODS FOR CALIBRATING IMAGE MAGNIFICATION BY USING REFERENCE MATERIALS HAVING PERIODIC STRUCTURES |
ECA ILAC P14 : 2013
|
ILAC POLICY FOR UNCERTAINTY IN CALIBRATION |
BS EN ISO 2592:2017
|
Petroleum and related products. Determination of flash and fire points. Cleveland open cup method |
EN ISO 13736:2013
|
Determination of flash point - Abel closed-cup method (ISO 13736:2013) |
I.S. EN ISO 3680:2004
|
DETERMINATION OF FLASH/NO FLASH - RAPID EQUILIBRIUM CLOSED CUP METHOD |
BS EN 16682:2017
|
Conservation of cultural heritage. Methods of measurement of moisture content, or water content, in materials constituting immovable cultural heritage |
DIN EN 15842 E : 2010
|
FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
PD ISO/TR 79:2015
|
Reference materials. Examples of reference materials for qualitative properties |
03/317065 DC : DRAFT NOV 2003
|
ISO/IEC 17025 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABS - AMENDMENT 1 |
ISO Guide 32:1997
|
Calibration in analytical chemistry and use of certified reference materials |
BS EN 15842:2010
|
Foodstuffs. Detection of food allergens. General considerations and validation of methods |
BS 2000-523(2015) : 2015
|
DETERMINATION OF FLASH NO-FLASH AND FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD |
15/30301302 DC : 0
|
BS EN ISO 2719 - DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD |
UNE-ISO/IEC GUIA 99:2012 IN
|
International vocabulary of metrology. Basics and general concepts and associated terms (VIM) |
PD CEN/TR 10317:2014
|
European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products prepared under the auspices of the European Committee for Iron and Steel Standardization (ECISS) |
BIS IS/ISO/IEC 17025 : 2005 AMD 1
|
GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
14/30296672 DC : 0
|
BS ISO GUIDE 33 - REFERENCE MATERIALS - GOOD PRACTICE IN USING REFERENCE MATERIALS |
ISO/IEC Guide 99:2007
|
International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
ASTM E 3131 : 2017
|
Standard Specification for Nucleic Acid-Based Systems for Bacterial Pathogen Screening of Suspicious Visible Powders |
S.R. CEN/TR 10317:2014
|
EUROPEAN CERTIFIED REFERENCE MATERIALS (EURONORM-CRMS) FOR THE DETERMINATION OF THE CHEMICAL COMPOSITION OF IRON AND STEEL PRODUCTS PREPARED UNDER THE AUSPICES OF THE EUROPEAN COMMITTEE FOR IRON AND STEEL STANDARDIZATION (ECISS) |
ISO Guide 30:2015
|
Reference materials Selected terms and definitions |
ASTM D 7911 : 2014
|
Standard Guide for Using Reference Material to Characterize Measurement Bias Associated with Volatile Organic Compound Emission Chamber Test |
UNI CEI EN ISO/IEC 17043 : 2010
|
CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING |
BS EN ISO 5667-3:2012
|
Water quality. Sampling Preservation and handling of water samples |
DIN EN ISO 3679:2015-06
|
Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015) |
ISO 1523:2002
|
Determination of flash point — Closed cup equilibrium method |
UNE-EN ISO 6974-2:2013
|
Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 2: Uncertainty calculations (ISO 6974-2:2012) |
UNE-EN ISO 6974-1:2013
|
Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 1: General guidelines and calculation of composition (ISO 6974-1:2012) |
BS EN ISO 3680:2004
|
Methods of test for petroleum and its products. BS 2000-524. Determination of flash/no flash. Rapid equilibrium closed cup method |
UNE-EN ISO 6142-1:2016
|
Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for Class I mixtures (ISO 6142-1:2015) |
EN ISO 6974-2:2012
|
Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 2: Uncertainty calculations (ISO 6974-2:2012) |
UNI EN ISO 6974-2 : 2012
|
NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 2: UNCERTAINTY CALCULATIONS |
UNI EN ISO 6974-1 : 2012
|
NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION |
UNI EN ISO 15193 : 2009
|
IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES |
UNI EN ISO 10723 : 2013
|
NATURAL GAS - PERFORMANCE EVALUATION FOR ANALYTICAL SYSTEMS |
UNE-EN ISO 148-3:2017
|
Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2016) |
DIN EN ISO 148-3:2015-09 (Draft)
|
METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 3: PREPARATION AND CHARACTERIZATION OF CHARPY V-NOTCH TEST PIECES FOR INDIRECT VERIFICATION OF PENDULUM IMPACT MACHINES (ISO 148-3:2016) |
BS EN ISO 15194:2009
|
In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Requirements for certified reference materials and the content of supporting documentation |
I.S. EN ISO/IEC 17043:2010
|
CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING |
PD ISO/TR 11773:2013
|
Global distribution of reference materials |
PD ISO/TR 16476:2016
|
Reference materials. Establishing and expressing metrological traceability of quantity values assigned to reference materials |
12/30271500 DC : 0
|
BS ISO GUIDE 80 - GUIDANCE FOR IN-HOUSE PRODUCTION OF REFERENCE MATERIALS FOR QUALITY CONTROL (QCMS) |
UNE-EN ISO 5667-3:2013
|
Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO 5667-3:2012) |
ISO 11952:2014
|
Surface chemical analysis Scanning-probe microscopy Determination of geometric quantities using SPM: Calibration of measuring systems |
DIN EN ISO 15194:2009-10
|
IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
BS EN ISO 148-3:2016
|
Metallic materials. Charpy pendulum impact test Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines |
DIN EN 16682 E : 2017
|
CONSERVATION OF CULTURAL HERITAGE - METHODS OF MEASUREMENT OF MOISTURE CONTENT, OR WATER CONTENT, IN MATERIALS CONSTITUTING IMMOVABLE CULTURAL HERITAGE |
ISO/TR 16476:2016
|
Reference materials — Establishing and expressing metrological traceability of quantity values assigned to reference materials |
CEN/TR 10317:2014
|
European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products prepared under the auspices of the European Committee for Iron and Steel Standardization (ECISS) |
I.S. EN 15842:2010
|
FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
14/30316056 DC : 0
|
BS ISO/GUIDE 31 - REFERENCE MATERIALS - CONTENTS OF CERTIFICATES, LABELS AND ACCOMPANYING DOCUMENTATION |
15/30317578 DC : 0
|
BS ISO 16700 - MICROBEAM ANALYSIS - SCANNING ELECTRON MICROSCOPY - GUIDELINES FOR CALIBRATING IMAGE MAGNIFICATION |
PD ISO GUIDE 30:2015
|
Reference materials. Selected terms and definitions |
16/30325304 DC : 0
|
BS EN ISO 2592 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD |
ISO 16700:2016
|
Microbeam analysis — Scanning electron microscopy — Guidelines for calibrating image magnification |
BS 2000-34(2002) : 2002 AMD 15248
|
METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD |
PREN 45001 : DRAFT 1997
|
GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
ASTM D 6808 : 2002 : R2012
|
Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis |
DIN EN ISO 15193:2009-10
|
IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES |
13/30285144 DC : 0
|
BS ISO 3679 - DETERMINATION OF FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD |
ISO Guide 80:2014
|
Guidance for the in-house preparation of quality control materials (QCMs) |
04/30126703 DC : DRAFT DEC 2004
|
ISO 13366-2 - MILK - ENUMERATION OF SOMATIC CELLS - PART 2: ELECTRONIC PARTICLE COUNTER METHOD |
09/30195571 DC : 0
|
BS EN ISO 12677 - CHEMICAL ANALYSIS OF REFRACTORY PRODUCTS BY X-RAY FLUORESCENCE (XRF) - FUSED CAST-BEAD METHOD |
BS 2000-170(2013) : 2013
|
DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD (ISO 13736:2013) |
BS 2000-36(2002) : 2002
|
METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD |
UNI CEI 70099 : 2008
|
INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
DIN EN 16682:2016-01 (Draft)
|
CONSERVATION OF CULTURAL HERITAGE - METHODS OF MEASUREMENT OF MOISTURE CONTENT, OR WATER CONTENT, IN MATERIALS CONSTITUTING IMMOVABLE CULTURAL HERITAGE |
I.S. EN ISO 2592:2017
|
PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD (ISO 2592:2017) |
NF EN ISO 15194 : 2009
|
IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
I.S. EN 16682:2017
|
CONSERVATION OF CULTURAL HERITAGE - METHODS OF MEASUREMENT OF MOISTURE CONTENT, OR WATER CONTENT, IN MATERIALS CONSTITUTING IMMOVABLE CULTURAL HERITAGE |
DIN EN ISO 5667-3:2013-03
|
WATER QUALITY - SAMPLING - PART 3: PRESERVATION AND HANDLING OF WATER SAMPLES (ISO 5667-3:2012) |
ASTM D 6808 : 2002
|
Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis |
ASTM D 7345 : 2017 : REDLINE
|
Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Micro Distillation Method) |
I.S. EN ISO 5667-3:2012
|
WATER QUALITY - SAMPLING - PART 3: PRESERVATION AND HANDLING OF WATER SAMPLES (ISO 5667-3:2012) |
I.S. EN 15309:2007
|
CHARACTERIZATION OF WASTE AND SOIL - DETERMINATION OF ELEMENTAL COMPOSITION BY X-RAY FLUORESCENCE |
ISO/TS 16195:2013
|
Nanotechnologies Guidance for developing representative test materials consisting of nano-objects in dry powder form |
DIN EN ISO 13736:2013-08
|
Determination of flash point - Abel closed-cup method (ISO 13736:2013) |
ISO 3679:2015
|
Determination of flash no-flash and flash point — Rapid equilibrium closed cup method |
BS EN ISO 17932:2011
|
Palm oil. Determination of the deterioration of bleachability index (DOBI) and carotene content |
BS EN ISO 13736:2008
|
Determination of flash point. Abel closed-cup method |
BS EN ISO 6974-2:2012
|
Natural gas. Determination of composition and associated uncertainty by gas chromatography Uncertainty calculations |
ISO 17932:2011
|
Palm oil Determination of the deterioration of bleachability index (DOBI) and carotene content |
ISO 6142-1:2015
|
Gas analysis Preparation of calibration gas mixtures Part 1: Gravimetric method for Class I mixtures |
BS EN ISO 2719:2002
|
Determination of flash point. Pensky-Martens closed cup method |
BS EN ISO 3679:2015
|
Determination of flash no-flash and flash point. Rapid equilibrium closed cup method |
UNE-EN ISO 3679:2015
|
Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015) |
UNE-EN ISO 10993-12:2013
|
Biological evaluation of medical devices - Part 12: Sample preparation and reference materials (ISO 10993-12:2012) |
ISO 10993-12:2012
|
Biological evaluation of medical devices Part 12: Sample preparation and reference materials |
UNE-EN ISO 10723:2013
|
Natural gas - Performance evaluation for analytical systems (ISO 10723:2012) |
ISO 10723:2012
|
Natural gas Performance evaluation for analytical systems |
ISO 15193:2009
|
In vitro diagnostic medical devices Measurement of quantities in samples of biological origin Requirements for content and presentation of reference measurement procedures |
UNE-EN ISO 17932:2012
|
Palm oil - Determination of the deterioration of bleachability index (DOBI) and carotene content (ISO 17932:2011) |
ISO 6974-2:2012
|
Natural gas — Determination of composition and associated uncertainty by gas chromatography — Part 2: Uncertainty calculations |
BS EN ISO 6974-1:2012
|
Natural gas. Determination of composition and associated uncertainty by gas chromatography General guidelines and calculation of composition |
ISO 3680:2004
|
Determination of flash/no flash Rapid equilibrium closed cup method |
ISO 13366-2:2006
|
Milk Enumeration of somatic cells Part 2: Guidance on the operation of fluoro-opto-electronic counters |
BS EN ISO 10723:2012
|
Natural gas. Performance evaluation for analytical systems |
ISO 13736:2013
|
Determination of flash point Abel closed-cup method |
UNE-EN ISO 2719:2017
|
Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
ISO 2719:2016
|
Determination of flash point — Pensky-Martens closed cup method |
DIN EN ISO/IEC 17043:2010-05
|
Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010) |
EN ISO 17932:2011
|
Palm oil - Determination of the deterioration of bleachability index (DOBI) and carotene content (ISO 17932:2011) |
EN ISO 15193:2009
|
In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for content and presentation of reference measurement procedures (ISO 15193:2009) |
EN ISO 3679:2015
|
Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015) |
EN ISO 10723:2012
|
Natural gas - Performance evaluation for analytical systems (ISO 10723:2012) |
EN 16682:2017
|
Conservation of cultural heritage - Methods of measurement of moisture content, or water content, in materials constituting immovable cultural heritage |
EN 15309:2007
|
Characterization of waste and soil - Determination of elemental composition by X-ray fluorescence |
EN ISO 6142-1:2015
|
Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for Class I mixtures (ISO 6142-1:2015) |
EN ISO/IEC 17043:2010
|
Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010) |
EN 15842:2010
|
Foodstuffs - Detection of food allergens - General considerations and validation of methods |
EN ISO 6974-1:2012/AC:2012
|
NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION (ISO 6974-1:2012/COR 1:2012) |
EN ISO 15194:2009
|
In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for certified reference materials and the content of supporting documentation (ISO 15194:2009) |
EN ISO 3680:2004
|
Determination of flash/no flash - Rapid equilibrium closed cup method (ISO 3680:2004) |
EN ISO 1523:2002
|
Determination of flash point - Closed cup equilibrium method (ISO 1523:2002) |
06/30138176 DC : 0
|
EN ISO 13736 - DETERMINATION OF FLASH POINT - ABEL CLOSED CUP METHOD |
04/30105010 DC : DRAFT JUL 2004
|
ISO 12156-1 - DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD |
DIN EN 15309:2007-08
|
Characterization of waste and soil - Determination of elemental composition by X-ray fluorescence |
ISO 18227:2014
|
Soil quality — Determination of elemental composition by X-ray fluorescence |
UNI EN ISO 17932 : 2011
|
PALM OIL - DETERMINATION OF THE DETERIORATION OF BLEACHABILITY INDEX (DOBI) AND CAROTENE CONTENT |
BS 2000-523(2004) : 2004
|
METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-523: DETERMINATION OF FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD |
ISO 14606:2015
|
Surface chemical analysis — Sputter depth profiling — Optimization using layered systems as reference materials |
ISO/TR 13014:2012
|
Nanotechnologies Guidance on physico-chemical characterization of engineered nanoscale materials for toxicologic assessment |
CEI UNI EN ISO/IEC 17043 : 2011
|
CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING |
EN ISO 10993-12:2012
|
Biological evaluation of medical devices - Part 12: Sample preparation and reference materials (ISO 10993-12:2012) |
97/402277 DC : DRAFT APR 1997
|
PREN 45001 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
PD ISO GUIDE 31:2015
|
Reference materials. Contents of certificates, labels and accompanying documentation |
UNI EN ISO 15194 : 2009
|
IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
ISO Guide 33:2015
|
Reference materials Good practice in using reference materials |
ANSI/AAMI/ISO 10993-12:2012
|
BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION AND REFERENCE MATERIALS |
I.S. EN ISO 15193:2009
|
IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES |
ASTM D 6808 : 2002 : R2007
|
Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis |
ISO 15194:2009
|
In vitro diagnostic medical devices Measurement of quantities in samples of biological origin Requirements for certified reference materials and the content of supporting documentation |
DIN EN ISO 6974-1 E : 2012
|
NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION (ISO 6974-1:2012) |
BS EN ISO 1523:2002
|
Method of test for petroleum and its products. Determination of flash point. Closed cup equilibrium method |
ISO 148-3:2016
|
Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines |
DIN EN ISO 3680:2004-07
|
DETERMINATION OF FLASH/NO FLASH - RAPID EQUILIBRIUM CLOSED CUP METHOD |