Skip to content
Please enter a keyword to search

  • MIL-DTL-26482 Revision H:2007

    Current The latest, up-to-date edition.

    Connectors, Electrical, Circular, Miniature, Quick Disconnect, Environment Resisting, Receptacles and Plugs, General Specification for

    Available format(s):  PDF

    Language(s): 

    Published date:  20-02-2007

    Publisher:  US Military Specs/Standards/Handbooks

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    1. SCOPE
    2. APPLICABLE DOCUMENTS
    3. REQUIREMENTS
    4. VERIFICATION
    5. PACKAGING
    6. NOTES

    Abstract - (Show below) - (Hide below)

    Specifies the general requirements for two series of environment resisting, quick disconnect, miniature, circular electrical connectors (and accessories).

    Scope - (Show below) - (Hide below)

    This specification covers the general requirements for two series of environment
    resisting, quick disconnect, miniature, circular electrical connectors (and accessories). Each series includes hermetic receptacles. The two series of connectors are intermateable when using power contacts and are not intermateable when using shielded contacts. When intermated, the minimum performance requirement for series 1 type connectors will be met.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes MIL C 26482 (G). (03/2007)
    Document Type Standard
    Publisher US Military Specs/Standards/Handbooks
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    MIL-DTL-83528-4 Revision G:2018 Gasketing Material, Conductive, Shielding Gasket, Electronic, EMI/RFI, Connector Flange Mount
    NASA KSC GP 864 VOL 2A : 2009 ELECTRICAL GROUND SUPPORT EQUIPMENT CABLE HANDBOOK
    SAE ARP 6903 : 2017 GUIDE FOR ACHIEVING PLATING/FINISH COMPATIBILITY WITH CONNECTORS AND ACCESSORIES USED IN ELECTRICAL WIRING INTERCONNECT SYSTEMS (EWIS)
    BS EN 13718-1:2014 Medical vehicles and their equipment. Air ambulances Requirements for medical devices used in air ambulances
    EN 13718-2:2015 Medical vehicles and their equipment - Air ambulances - Part 2: Operational and technical requirements for air ambulances
    EN 61076-3-114 : 2009 Connectors for electronic equipment - Product requirements - Part 3-114: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 11 related to IEC 61076-3-106 - Bayonet coupling type
    MS3120 Revision G:2009 CONNECTORS, RECEPTACLE, ELECTRICAL, CRIMP TYPE, WALL MOUNTING, FLANGE, NO. 4 HOLES, BAYONET COUPLING, SERIES 1, CLASSES E, F AND P
    PREN 3646-001 : 200P2 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, BAYONET COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
    MS3186 Revision G:2011 CONNECTOR, MOUNTING TO CONNECTORS, MOUNTING NUTS, PLAIN HEXAGON
    MS3111 Revision F:2015 CONNECTORS, PLUG, ELECTRICAL, SOLDER TYPE, CABLE-CONNECTING, BAYONET COUPLING, SERIES 1, CLASSES E, F, J AND P
    MIL-STD-2003-5 Revision A:2009 ELECTRIC PLANT INSTALLATION STANDARD METHODS FOR SURFACE SHIPS AND SUBMARINES (CONNECTORS)
    MIL-STD-1353 Revision C:2014 ELECTRICAL CONNECTORS, PLUG-IN SOCKETS AND ASSOCIATED HARDWARE, SELECTION AND USE OF
    MS3128 Revision L:2015 CONNECTORS, RECEPTACLE, ELECTRICAL, CRIMP TYPE, WALL MOUNTING, NO. 4/6 HOLES, BAYONET COUPLING, SERIES 1, CLASSES E, F AND P
    MS3110 Revision F:2009 CONNECTORS, RECEPTACLE, ELECTRICAL, SOLDER TYPE, WALL MOUNTING, BAYONET COUPLING, SERIES 1, CLASSES E, F, J AND P
    MS3113 Revision J:2009 CONNECTORS, RECEPTACLE, ELECTRICAL, SERIES 1, SOLDER TYPE, SOLDER MOUNTING, BAYONET COUPLING, CLASS H
    MIL-STD-1669 Revision A:2007 INSERT ARRANGEMENTS FOR MIL-DTL-26482 - ENVIRONMENT RESISTING, CIRCULAR, ELECTRICAL CONNECTORS
    DSCC 89017 : D CONNECTOR ACCESSORIES, ELECTRICAL, ADAPTER, SHRINK BOOT, RFI/EMI, 45 DEGREES, CATEGORY 3C, FOR MIL-DTL-83723 SERIES 3, SAE-AS50151 (SAE-AS34001 AND AS34501), SAE-AS81703 SERIES 3, AND MIL-DTL-26482 SERIES 2
    MS3115 Revision G:2009 CONNECTORS, RECEPTACLE, ELECTRICAL, DUMMY STOWAGE, BAYONET COUPLING, FOR MIL-DTL-26482 CONNECTORS, SERIES 1 AND 2
    MS3470 Revision E:2007 CONNECTORS, RECEPTACLE, ELECTRICAL, SERIES 2, CRIMP TYPE, NARROW FLANGE MOUNT, BAYONET COUPLING, CLASSES A, D, L, T, W AND K
    SAE ARP 1350 : 2012 PROCEDURE FOR INSTALLATION AND MOUNTING OF SINGLE HOLE MOUNT, CYLINDRICAL, ELECTRICAL CONNECTORS (FOR PRESSURE DIFFERENTIAL APPLICATIONS)
    12/30266576 DC : 0 BS EN 13718-2 - MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS OF AIR AMBULANCES
    MS3180 Revision G:2012 Connectors, Electrical Circular, Cover, Protective Plug, MIL-DTL-26482 Series 1 and 2, Bayonet Coupling
    13/30276231 DC : 0 BS EN 13718-1 - MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES
    MS3187 Revision F:2007 PLUG, END SEAL, FOR MIL-DTL-26482, MIL-DTL-5015, MIL-C-81703 AND MIL-DTL-83723 ELECTRICAL CONNECTORS
    MS3181 Revision G:2012 CONNECTORS, ELECTRICAL CIRCULAR, COVER, PROTECTIVE, RECEPTACLE, MIL-DTL-26482 SERIES 1 AND 2, BAYONET COUPLING
    MS3473 Revision B:2007 CONNECTORS, RECEPTACLE, ELECTRICAL, SERIES 2, HERMETIC, SOLDERLESS, SOLDER MOUNTING, BAYONET COUPLING, CLASS N
    SAE AIR 5919 : 2017 ALTERNATIVES TO CADMIUM PLATING
    DIN EN 3646-001:2016-03 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, BAYONET COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
    I.S. EN 3646-001:2015 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, BAYONET COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
    UNI EN 13718-1 : 2014 MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES
    MIL-DTL-22442 Revision G:2009 CABLE ASSEMBLIES, AIRCRAFT AUDIO, GENERAL SPECIFICATION FOR
    PREN 13718-2 : DRAFT 2012 MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS OF AIR AMBULANCES
    MS3112 Revision H:2007 CONNECTORS, RECEPTACLE, ELECTRICAL, BOX MOUNTING, FLANGE, BAYONET COUPLING, SOLDER CONTACT, SERIES 1
    MS3122 Revision F:2007 CONNECTORS, RECEPTACLE, ELECTRICAL, CRIMP TYPE, BOX MOUNTING, FLANGE, NO. 4 HOLES, BAYONET COUPLING, SERIES 1
    BS EN 61076-3-114:2009 Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for.protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface. Variant 11 related to IEC 61076-3-106. Bayonet coupling type
    MIL-STD-2003 Revision A:2009 ELECTRIC PLANT INSTALLATION STANDARD METHODS FOR SURFACE SHIPS AND SUBMARINES
    MIL-PRF-81757-17 Base Document:2009 BATTERY, STORAGE, AIRCRAFT, NICKEL-CADMIUM, HIGH-RATE, TYPE 2, 24-VOLT, 35-AMPERE-HOUR, CHARGE CONTROLLED
    MS3479 Revision C:2007 CONNECTORS, RECEPTACLE, ELECTRICAL, SERIES 2, HERMETIC, SOLDERLESS, REAR MOUNTING, JAM NUT, BAYONET COUPLING, CLASS N
    MS3442 Revision C:2007 CONNECTORS, RECEPTACLE, ELECTRICAL, WIDE FLANGE MOUNT, BAYONET COUPLING, SOLDER PIN CONTACT, CLASS H, SERIES 2
    SAE AIR 4004 : 2015 GUIDE FOR INSTALLATION OF ELECTRICAL WIRE AND CABLE ON AIRCRAFT LANDING GEAR
    DIN EN 13718-2:2015-05 MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS FOR AIR AMBULANCES
    DIN EN 13718-1:2014-12 MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES
    UNE-EN 13718-2:2015 Medical vehicles and their equipment - Air ambulances - Part 2: Operational and technical requirements for air ambulances
    NASA KSC E 165 : 2009 ELECTRICAL GROUND SUPPORT EQUIPMENT FABRICATION, SPECIFICATION FOR
    NASA MSFC STD 3012 : 2012 ELECTRICAL, ELECTRONIC, AND ELECTROMECHANICAL (EEE) PARTS MANAGEMENT AND CONTROL REQUIREMENTS FOR MSFC SPACE FLIGHT HARDWARE
    MS3114 Revision M:2015 CONNECTORS, RECEPTACLE, ELECTRICAL, SERIES 1, SOLDER TYPE, JAM NUT MOUNTING, BAYONET COUPLING, CLASSES E, F, H AND P
    MS3121 Revision E:2015 CONNECTORS, PLUG, ELECTRICAL, CRIMP TYPE, CABLE-CONNECTING, BAYONET COUPLING, SERIES 1, CLASSES E, F AND P
    MS3126 Revision H:2015 CONNECTORS, PLUG, ELECTRICAL, CRIMP TYPE, STRAIGHT, BAYONET COUPLING, SERIES 1, CLASSES E, F AND P
    MS3116 Revision E:2013 Connectors, Plug, Electrical, Solder Type, Straight, Bayonet Coupling, Series 1, Classes E, F, J and P
    MS3472 Revision E:2009 CONNECTORS, RECEPTACLE, ELECTRICAL, SERIES 2, CRIMP TYPE, WIDE FLANGE MOUNTING, BAYONET COUPLING, CLASSES A, D, L, T, W AND K
    MS3471 Revision E:2007 CONNECTORS, RECEPTACLE, ELECTRICAL, SERIES 2, CRIMP TYPE, CABLE CONNECTING, BAYONET COUPLING, CLASSES A, D, L, T, W AND K
    MS3185 Revision B:2013 Mold, Plotting, and Adapter, Electrical Connector (for MIL-DTL-26482, Series 1, Class P)
    MS3443 Revision C:2011 CONNECTORS, RECEPTACLE, ELECTRICAL, SOLDER OR WELDED FLANGE MOUNT, BAYONET COUPLING, SOLDER PIN CONTACT, CLASS H, SERIES 2
    MS3127 Revision L:2007 CONNECTORS, RECEPTACLE, ELECTRICAL, SERIES 1, CRIMP TYPE, BOX MOUNTING, FLANGE, NO. 4/6 HOLES, BAYONET COUPLING, CLASS E
    MS3477 Revision B:2007 CONNECTORS, RECEPTACLE, ELECTRICAL, SERIES 2, HERMETIC, SOLDERLESS, BOX MOUNTING, BAYONET COUPLING, CLASS N
    PREN 13718-1 : DRAFT 2013 MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES
    MIL-PRF-29595-2 Base Document:2012 Battery, Storage, Aircraft, Maintenance-Free, 26-Volt, 50-Ampere-Hour, Lithium Rechargeable
    MS3119 Revision E:2007 ADAPTER, CONNECTORS, RECEPTACLE, ELECTRICAL, THRU-BULKHEAD MOUNTING, FLANGE, BAYONET COUPLING, SERIES 1
    MS3474 Revision J:2007 CONNECTORS, RECEPTACLE, ELECTRICAL, SERIES 2, CRIMP TYPE, REAR MOUNTING JAM NUT, BAYONET COUPLING, CLASSES A, D, L, T, W AND K
    SAE AIR 6151 : 2014(R 2019) TORQUE, THREADED APPLICATION, ELECTRICAL CONNECTOR, ACCESSORY AND TERMINAL BOARD INSTALLATION
    SAE AS 85049 : 2016 CONNECTOR ACCESSORIES, ELECTRICAL GENERAL SPECIFICATION FOR
    EN 13718-1:2014 Medical vehicles and their equipment - Air ambulances - Part 1: Requirements for medical devices used in air ambulances
    IEC 61076-3-114:2009 Connectors for electronic equipment - Product requirements - Part 3-114: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 11 related to IEC 61076-3-106 - Bayonet coupling type
    I.S. EN 13718-1:2014 MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES
    BS EN 13718-2:2015 Medical vehicles and their equipment. Air ambulances Operational and technical requirements for air ambulances
    I.S. EN 13718-2:2015 MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS FOR AIR AMBULANCES
    BS EN 3646-001:2015 Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous Technical specification
    I.S. EN 13718-2:2015+A1:2020 MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS FOR AIR AMBULANCES
    EN 3646-001:2015 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, BAYONET COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
    MS3440 Revision D:2011 CONNECTORS, RECEPTACLE, ELECTRICAL, NARROW FLANGE MOUNT, BAYONET COUPLING, SOLDER PIN CONTACT, CLASS H, SERIES 2
    MS3475 Revision G:2015 CONNECTORS, PLUG, ELECTRICAL, RFI SHIELDED, SERIES 2, CRIMP TYPE, BAYONET COUPLING, CLASSES A, D, L, T, W AND K
    I.S. EN 61076-3-114:2009 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-114: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 11 RELATED TO IEC 61076-3-106 - BAYONET COUPLING TYPE
    MS3481 Revision A:2007 TOOL, CONNECTOR ASSEMBLY, FOR MIL-DTL-26482 CONNECTORS
    MS3449 Revision E:2011 CONNECTORS, RECEPTACLE, ELECTRICAL, SERIES 2, SINGLE HOLE MOUNT, BAYONET COUPLING, SOLDER PIN CONTACT, CLASS H
    CEI EN 61076-3-114 : 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-114: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 11 RELATED TO IEC 61076-3-106 - BAYONET COUPLING TYPE
    NASA KSC STD 132 : 2008 POTTING AND MOLDING ELECTRICAL CABLE ASSEMBLY TERMINATIONS, STANDARD FOR
    MIL-HDBK-1646 Base Document:2016 Selectionof Electrical Contacts, Connectors and Associated Servicing Tools
    MS3124 Revision G:2011 CONNECTORS, RECEPTACLE, ELECTRIC, CRIMP TYPE, REAR MOUNTING, JAM NUT, BAYONET COUPLING, SERIES 1, CLASSES E, F AND P

    Standards Referencing This Book - (Show below) - (Hide below)

    MS3127 Revision L:2007 CONNECTORS, RECEPTACLE, ELECTRICAL, SERIES 1, CRIMP TYPE, BOX MOUNTING, FLANGE, NO. 4/6 HOLES, BAYONET COUPLING, CLASS E
    SAE AMS 1424 : 2016 FLUID, AIRCRAFT DEICING/ANTI-ICING, SAE TYPE 1
    MIL-I-81969-17 Revision B:1989 INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE 1, CLASS 1, COMPOSITION C
    ASTM B 733 : 2015 : REDLINE Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal
    SAE AMS QQ P 416 : 2016 PLATING, CADMIUM (ELECTRODEPOSITED)
    MIL-DTL-5624 Revision W:2016 TURBINE FUEL, AVIATION, GRADES JP-4 AND JP-5
    ASTM B 339 : 2012 : REDLINE Standard Specification for Pig Tin
    SAE AS 39029/4 : 2012 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, MIL-DTL-83723 SERIES 1 AND 3, AND MIL-DTL-83733 CONNECTORS)
    MIL-DTL-45204 Revision D:2007 Gold Plating, Electrodeposited
    MIL-STD-810 Revision G:2008 ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
    MIL-PRF-7808 Revision L:1997 LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE
    ANSI/NCSL Z540 3 : 2006(R2013) REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT
    MIL-PRF-5606 Revision H:2002 HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE
    SAE AIR 1351 : 2014 MANUFACTURERS' IDENTIFICATION OF AEROSPACE ELECTRICAL AND ELECTRONIC WIRING DEVICES AND ACCESSORIES
    SAE AS 39029/5 : 2017 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, MIL-DTL-83723 SERIES 1 AND 3, MIL-DTL-83733 CONNECTORS, MIL-DTL-12883/40, AND /41 RELAY SOCKETS)
    MIL-PRF-87937 Revision D:2001 CLEANING COMPOUND, AEROSPACE EQUIPMENT
    SAE AS 39029/26B : 2013(R2018) CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED (FOR MIL-DTL-26482-SERIES 1 CONNECTORS)
    SAE AMS QQ N 290 : 2015 NICKEL PLATING (ELECTRODEPOSITED)
    ASTM B 545 : 2013 : REDLINE Standard Specification for Electrodeposited Coatings of Tin
    MS3187 Revision F:2007 PLUG, END SEAL, FOR MIL-DTL-26482, MIL-DTL-5015, MIL-C-81703 AND MIL-DTL-83723 ELECTRICAL CONNECTORS
    MIL-STD-1669 Revision A:2007 INSERT ARRANGEMENTS FOR MIL-DTL-26482 - ENVIRONMENT RESISTING, CIRCULAR, ELECTRICAL CONNECTORS
    SAE AS 39029/10 : 2016 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, THERMOCOUPLE (FOR MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, MIL-DTL-83723 SERIES 1 AND 3, AND MIL-DTL-83733 CONNECTORS)
    ASME B46.1 : 2009 SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY)
    MIL-I-81969-14 Revision C:1987 INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE 3, CLASS 2, COMPOSITION B
    IPC J STD 006 : C REQUIREMENTS FOR ELECTRONIC GRADE SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID SOLDERS FOR ELECTRONIC SOLDERING APPLICATIONS
    MIL-STD-889 Revision C:2016 DISSIMILAR METALS
    MIL-I-81969-30 Base Document:1979 INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE 2, CLASS 2, COMPOSITION C
    SAE AS 39029/24 : 2013 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED, (FOR MIL-C-26482 SERIES 1 CONNECTORS)
    MS3461 Revision A:1975 TEST GAGE, MIL-C-0026482 SERIES 2 OR MIL-C-81703 SERIES 3 CONTACT RETENTION FEATURE
    MIL-DTL-83488 Revision D:1999 COATING, ALUMINUM, HIGH PURITY
    SAE AS 39029/7 : 2011 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED (FOR MIL-C-26482 SERIES 2 AND MIL-C-81703 SERIES 3 CONNECTORS)
    SAE AS 22759 : 2014 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, COPPER OR COPPER ALLOY
    SAE AMS QQ S 763D : 2013(S2015) STEEL, CORROSION RESISTANT, BARS, WIRE, SHAPES, AND FORGINGS
    SAE AS 39029/25 : 2013(R2018) CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED (FOR MIL-DTL-26482 SERIES 1 CONNECTORS)
    SAE AS 85049 : 2016 CONNECTOR ACCESSORIES, ELECTRICAL GENERAL SPECIFICATION FOR
    MS3460 Revision A:1975 TEST GAGE, MIL-C-0026482 SERIES 1 OR MIL-C-81703 SERIES 2 CONTACT RETENTION FEATURE
    MIL-PRF-23699 Revision G:2014 Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167
    MS3122 Revision F:2007 CONNECTORS, RECEPTACLE, ELECTRICAL, CRIMP TYPE, BOX MOUNTING, FLANGE, NO. 4 HOLES, BAYONET COUPLING, SERIES 1
    MIL-STD-790 Revision G:2011 ESTABLISHED RELIABILITY AND HIGH RELIABILITY QUALIFIED PRODUCTS LIST (QPL) SYSTEMS FOR ELECTRICAL, ELECTRONIC, AND FIBER OPTIC PARTS SPECIFICATIONS
    MIL A 8625 : F ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS
    MS3119 Revision E:2007 ADAPTER, CONNECTORS, RECEPTACLE, ELECTRICAL, THRU-BULKHEAD MOUNTING, FLANGE, BAYONET COUPLING, SERIES 1
    SAE AS 39029/23 : 2013 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED, (FOR MIL-C-26482 SERIES 1 CONNECTORS)
    MIL-PRF-8516 Revision G:1997 SEALING COMPOUND, SYNTHETIC RUBBER, ELECTRIC CONNECTORS AND ELECTRIC SYSTEMS, CHEMICALLY CURED
    MS3462 Revision B:1975 TEST GAGE, MIL-C-26482 SERIES 2 (CLASS N), MIL-C-81703 SERIES 3 (CLASS N) AND MIL-C-0081511 SERIES 3 AND 4 (CLASS L) CONTACT RETENTION FEATURE
    SAE AS 39029/9 : 2016 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, THERMOCOUPLE (FOR MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, MIL-DTL-83723 SERIES 1 AND 3, AND MIL-DTL-83733 CONNECTORS)
    MIL-STD-202 Revision H:2015 ELECTRONIC AND ELECTRICAL COMPONENT PARTS
    SAE AS 22520 : 2011 CRIMPING TOOLS, WIRE TERMINATION, GENERAL SPECIFICATION FOR
    SAE AS 39029 : 2017 CONTACTS, ELECTRICAL CONNECTOR, GENERAL SPECIFICATION FOR
    MIL-STD-1285 Revision D:2004 MARKING OF ELECTRICAL AND ELECTRONIC PARTS
    ASTM A 342/A342M : 2014 : REDLINE Standard Test Methods for Permeability of Weakly Magnetic Materials
    EIA 557 : 2006 STATISTICAL PROCESS CONTROL SYSTEMS
    SAE AS 39029/8 : 2011 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED, (FOR MIL-C-26482 SERIES 2, MIL-C-81703 SERIES 3 CONNECTORS)
    MIL-I-81969-19 Revision B:1991 INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE 2, CLASS 1, COMPOSITION C
    MS27488 Revision N:2008 PLUG, END SEAL, ELECTRICAL CONNECTOR
    MS3112 Revision H:2007 CONNECTORS, RECEPTACLE, ELECTRICAL, BOX MOUNTING, FLANGE, BAYONET COUPLING, SOLDER CONTACT, SERIES 1
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective