Skip to content
Please enter a keyword to search

  • MIL-PRF-28800 Revision F:1996

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    TEST EQUIPMENT FOR USE WITH ELECTRICAL AND ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR

    Available format(s):  PDF

    Superseded date:  17-11-2021

    Language(s):  English

    Published date: 

    Publisher:  US Military Specs/Standards/Handbooks

    Add To Cart

    Abstract - (Show below) - (Hide below)

    Covers general requirements for test equipment used in testing and calibrating electrical and electronic equipment.

    General Product Information - (Show below) - (Hide below)

    Committee FSC 6625
    Document Type Standard
    Publisher US Military Specs/Standards/Handbooks
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    MIL-STD-1678-6 Revision A:2016 FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS - PART 6: PARTS AND SUPPORT EQUIPMENT COMMONALITY AND STANDARDIZATION REQUIREMENTS (PART 6 OF 6 PARTS)
    MIL-PRF-85676 Revision A:2006 LIGHTING, EMERGENCY EGRESS, SUBASSEMBLY
    MIL-PRF-32389 Base Document:2013 Load Bank, Electrical
    SAE ARP 6216 : 2017 EWIS WIRING INSULATION BREAKDOWN TESTING
    DEFSTAN 00-970(PT0)/9(2012) : 2012 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
    DEFSTAN 00-970(PT0)/17(2016) : 2016 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
    DEFSTAN 00-970(PT0)/14(2014) : 2014 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
    DEFSTAN 00-970(PT0)/7(2011) : 2011 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
    DEFSTAN 00-970(PT0)/15(2015) : 2015 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
    DEFSTAN 00-970(PT0)/12(2014) : 2014 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
    DEFSTAN 00-970(PT0)/13(2014) : 2014 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
    DEFSTAN 00-970(PT0)/11(2013) : 2013 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
    DEFSTAN 00-970(PT0)/8(2011) : 2011 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
    A-A-58047 Revision D:2016 SIGNAL GENERATOR
    DEFSTAN 00-970(PT0)/10(2013) : 2013 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
    DEFSTAN 00-970(PT0)/16(2015) : 2015 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
    IEEE DRAFT 1505 : 0 RECEIVER FIXTURE INTERFACE SPONSORED BY THE CONNECTORS TECHNICAL COMMITTEE TC-55 OF THE IEEE INSTRUMENTATION & MEASUREMENT SOCIETY
    BS IEC 63004:2015 Standard for receiver fixture interface
    A-A-59273 Revision B:2005 GENERATOR, SIGNAL (300 KHZ TO 2 GHZ)
    MIL-PRF-1-1386 Revision F:2008 ELECTRON TUBE, CATHODE RAY TYPE 4QP2
    MIL-DTL-24784-7 Revision D:2017 Technical Repair Standards (TRS) for Hull, Mechanical, and Electrical (HM&E) Equipment, Electronic Equipment, and Ordnance Equipment
    MIL-G-18997 Revision E:1991 GAUGE, PRESSURE, DIAL INDICATING
    A-A-59761 Revision A:2005 SIGNAL GENERATOR 1.8 GHZ TO 4.5 GHZ
    MIL-DTL-55116 Revision D:2013 CONNECTORS: MINIATURE AUDIO, FIVE-PIN AND SIX-PIN - GENERAL SPECIFICATION FOR
    MIL-PRF-32516 Base Document:2015 ELECTRONIC TEST EQUIPMENT, INTERMITTENT FAULT DETECTION AND ISOLATION FOR CHASSIS AND BACKPLANE CONDUCTIVE PATHS
    IEC 63003:2015 Standard for the common test interface pin map configuration for high-density, single-tier electronics test requirements utilizing IEEE Std 1505™
    A-A-59274 Revision B:2005 GENERATOR, SIGNAL (9 KHZ TO 3.2 GHZ)
    MIL-PRF-32133 Base Document:2003 X-ray Apparatus Set, Radiographic, Industrial, Portable, 160KVCP
    A-A-59983 Base Document:2017 TRANSIT LEVEL, AUTO
    A-A-59130 Base Document:1997 ANALYZER, SPECTRUM 10 KHZ TO 50 GHZ
    A-A-59721 Base Document:2004 LOAD BANK, ELECTRICAL
    SAE AS 6479 : 2014 SPLICER, FUSION, FIBER OPTIC, AEROSPACE
    IEC 63004:2015 Standard for receiver fixture interface
    A-A-59803 Base Document:2008 TRANSMISSION IMPAIRMENT MEASUREMENT SET (TIMS)
    BS IEC 63003:2015 Standard for the common test interface pin map configuration for high-density, single-tier electronics test requirements utilizing IEEE Std 1505TM
    SCTE 96 : 2013 CABLE TELECOMMUNICATIONS TESTING GUIDELINES

    Standards Referencing This Book - (Show below) - (Hide below)

    ASME Y32.2 : LATEST DRAW AND TERM - GRAPHICS SYMBOLS STANDARDS - FOR ELECTRICAL AND ELECTRONIC DIAGRAMS
    ASTM D 4169 : 2016 : REDLINE Standard Practice for Performance Testing of Shipping Containers and Systems
    IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION) ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST
    ISA S82.01 : 1994 ELECTRICAL AND ELECTRONIC TEST, MEASURING, CONTROLLING AND RELATED EQUIPMENT - GENERAL REQUIREMENTS
    MIL-STD-1686 Revision C:1995 ELECTROSTATIC DISCHARGE CONTROL PROGRAM FOR PROTECTION OF ELECTRICAL AND ELECTRONIC PARTS, ASSEMBLIES AND EQUIPMENT (EXCLUDING ELECTRICALLY INITIATED EXPLOSIVE DEVICES)
    IEC 61000-4-4:2012 RLV Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
    IEEE 488.1 : 2003 STANDARD FOR HIGHER PERFORMANCE PROTOCOL FOR THE STANDARD DIGITAL INTERFACE FOR PROGRAMMABLE INSTRUMENTATION
    IEC 61000-4-6 : 4.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS
    IEC 61000-4-6:2013 Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
    IEEE 488.2 : 1992 STANDARD CODES, FORMATS, PROTOCOLS, AND COMMON COMMANDS FOR USE WITH IEEE 488.1-1987, IEEE STANDARD DIGITAL INTERFACE FOR PROGRAMMABLE INSTRUMENTATION
    IEC 61000-4-2:2008 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
    IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
    ISA S82.02 : 1988 SAFETY STANDARDS FOR ELECTRICAL AND ELECTRONIC TEST, MEASURING, CONTROLLING AND RELATED EQUIPMENT - ELECTRICAL AND ELECTRONIC TEST AND MEASURING EQUIPMENT
    CISPR 11:2015 RLV Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
    ISO 7779:2010 Acoustics Measurement of airborne noise emitted by information technology and telecommunications equipment
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective