Skip to content
Please enter a keyword to search

  • MIL-PRF-39016 Revision H:2017

    Current The latest, up-to-date edition.

    Relays, Electromagnetic, Established Reliability, General Specification for

    Available format(s):  PDF

    Language(s): 

    Published date:  13-09-2017

    Publisher:  US Military Specs/Standards/Handbooks

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    1. SCOPE
    2. APPLICABLE DOCUMENTS
    3. REQUIREMENTS
    4. VERIFICATION
    5. PACKAGING
    6. NOTES

    Abstract - (Show below) - (Hide below)

    Specifies the general requirements for electromagnetic, hermetically sealed relays for use in electronic and communication-type equipment.

    Scope - (Show below) - (Hide below)

    This specification covers the general requirements for electromagnetic, hermetically sealed relays for use in electronic and communication-type equipment (see 6.1). These relays are designed to operate over the full range from low level to power switching with contact ratings up to 5 amperes alternating current (ac) or direct current (dc). The failure rate level is established at a confidence level of 90 percent for qualification and 60 percent for maintenance of qualification based on 100,000 cycles at +125°C under the rated load conditions specified herein. CAUTION: The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay. CAUTION: Pick-up, hold, and dropout voltages are for test purposes only and are not to be used as design criteria. For additional application and caution information, see 6.1.

    General Product Information - (Show below) - (Hide below)

    Document Type Standard
    Publisher US Military Specs/Standards/Handbooks
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    MIL-R-39016-39 Revision G:2014 RELAYS, ELECTROMAGNETIC, HERMETICALLY SEALED, 4PDT, LOW-LEVEL TO 3 AMPERES (400 MILLIWATTS)
    MIL-STD-1580 Revision B:2003 DESTRUCTIVE PHYSICAL ANALYSIS FOR ELECTRONIC, ELECTROMAGNETIC, AND ELECTROMECHANICAL PARTS
    MIL-PRF-39016-14 Revision F:2016 Relays, Electromagnetic, Established Reliability, 4PDT, Low Level To 2 Amperes (0.150-Inch Terminal Spacing)
    MIL-PRF-39016-20 Revision J:2004 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, DPDT, LOW LEVEL TO 1.0 AMPERE WITH INTERNAL DIODES FOR COIL TRANSIENT SUPPRESSION AND POLARITY REVERSAL PROTECTION
    MIL STD 11991 : A GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES
    DSCC 85138 : D RELAYS, ELECTROMAGNETIC, HIGH VIBRATION, DPDT, LOW LEVEL TO 1.0 AMPERE, WITH INTERNAL DIODES FOR COIL TRANSIENT SUPPRESSION AND REVERSE POLARITY PROTECTION
    MIL-PRF-39016-18 Revision H:2005 Relays, Electromagnetic, Established Reliability, DPDT, Low Level to 1 Ampere with Internal Diode for Coil Transient Suppression, Terminals 0.100-Inch Grid Pattern
    MIL-DTL-15103 Revision G:2015 SALINITY INDICATING EQUIPMENT
    MIL-PRF-39016-44 Revision E:2006 Relays, Electromagnetic, Established Reliability, DPDT, Low Level to 2 Amperes, Terminals 0.200-Inch Grid Pattern (Sensitive, 100/125 Milliwatts, Coil Operate Power at 25 Degrees C)
    MIL-PRF-39016-7 Revision G:2004 Relays, Electromagnetic, Established Reliability, SPDT, Low Level to 1 Ampere
    MIL-HDBK-1760 Revision A:2004 AIRCRAFT/STORE ELECTRICAL INTERCONNECTION SYSTEM
    MIL-PRF-39016-27 Revision F:2005 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, SPDT, LOW LEVEL TO 0.5 AMPERE (LATCHING) WITH INTERNAL DIODES FOR COIL TRANSIENT SUPPRESSION
    MIL-PRF-39016-28 Revision F:2005 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, SPDT, LOW LEVEL TO 0.5 AMPERE (LATCHING) WITH INTERNAL DIODES FOR COIL TRANSIENT SUPPRESSION AND POLARITY REVERSAL PROTECTION
    MIL-PRF-39016-45 Revision F:2018 Relays, Electromagnetic, Established Reliability, DPDT, Low Level to 2 Amperes (Latching)
    MIL-PRF-39016-30 Revision F:2005 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, DPDT, LOW LEVEL TO 1.0 AMPERE (LATCHING) WITH INTERNAL DIODES FOR COIL TRANSIENT SUPPRESSION AND POLARITY REVERSAL PROTECTION
    MIL-PRF-39016-37 Revision D:2014 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, DPDT, LOW LEVEL TO 2 AMPERES (0.150-INCH TERMINAL SPACING), WITH INTERNAL DIODE FOR COIL TRANSIENT SUPPRESSION
    MIL-PRF-39016-47 Revision C:2006 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, DPDT, LOW LEVEL TO 0.5 AMPERE (.100 D.I.P. TERMINAL SPACING) ONE-TENTH SIZE, SENSITIVE, BI-STABLE, (LATCHING)
    DSCC 84173 : F RELAYS, ELECTROMAGNETIC, HIGH VIBRATION, DPDT, LOW LEVEL TO 1.0 AMPERE WITH INTERNAL DIODE FOR COIL TRANSIENT SUPPRESSION
    NASA MSFC STD 3012 : 2012 ELECTRICAL, ELECTRONIC, AND ELECTROMECHANICAL (EEE) PARTS MANAGEMENT AND CONTROL REQUIREMENTS FOR MSFC SPACE FLIGHT HARDWARE
    MIL-PRF-39016-53 Revision C:2006 Relays, Electromagnetic, Established Reliability, Hermetically Sealed, 4PDT, Low Level to 2 Amperes (.150-Inch Terminal Spacing) with Internal Diode for Coil Transient Suppression
    MIL-PRF-39016-25 Revision F:2005 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, SPDT, LOW LEVEL TO 1.0 AMPERE (SENSITIVE, 40 MILLIWATTS) WITH AN INTERNAL DIODE FOR COIL TRANSIENT SUPPRESSION
    MIL-PRF-39016-24 Revision F:2005 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, SPDT, LOW LEVEL TO 1.0 AMPERE WITH INTERNAL DIODES FOR COIL TRANSIENT SUPPRESSION AND POLARITY REVERSAL PROTECTION
    MIL-PRF-39016-8 Revision J:2016 Relays, Electromagnetic, Established Reliability, SPDT, Low Level to 0.5 Ampere (Latching)
    MIL-PRF-39016-22 Revision F:2016 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, DPDT, LOW LEVEL TO 2 AMPERES (0.200-INCH TERMINAL SPACING) COIL TRANSIENT SUPPRESSED
    MIL-PRF-39016-11 Revision G:2004 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, DPDT, LOW LEVEL TO 1.0 AMPERE (SENSITIVE, 60 MILLIWATTS, COIL OPERATE POWER AT 25 DEGREES C
    MIL-PRF-39016-26 Revision F:2005 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, SPDT, LOW LEVEL TO 1.0 AMPERE (SENSITIVE 4O MILLIWATTS) WITH INTERNAL DIODES FOR COIL TRANSIENT SUPPRESSION AND POLARITY REVERSAL PROTECTION
    MIL-PRF-39016-54 Revision D:2006 Relays, Electromagnetic, Established Reliability, Hermetically Sealed, 4PDT, Low Level to 2 Amperes (.150-Inch Terminal Spacing) with Internal Diode for Coil Transient Suppression and Reverse Polarity Protection
    MIL-PRF-39016-41 Revision E:2005 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, DPDT, LOW LEVEL TO 1 AMPERE, TERMINALS 0.100-INCH GRID PATTERN SENSITIVE, 60 MILLIWATTS, COIL OPERATE POWER AT 25 DEGREE C
    MIL R 39016/40 : G RELAYS, ELECTROMAGNETIC, 4PDT, LOW LEVEL TO 2.0 AMPERES (0.100-INCH TERMINAL SPACING)
    MIL-PRF-39016-21 Revision H:2013 Relays, Electromagnetic, Established Reliability, DPDT, Low Level to 1.0 Ampere (Sensitive, 60 Milliwatts) with Internal Diodes for Coil Transient Suppression and Polarity Reversal Protection
    MIL-PRF-39016-6 Revision L:2004 Relays, Electromagnetic, Established Reliability, DPDT, Low Level to 2 Amperes (0.200-Inch Terminal Spacing)
    MIL-PRF-39016-15 Revision M:2014 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, DPDT, LOW LEVEL TO 1.0 AMPERE WITH INTERNAL DIODE FOR COIL TRANSIENT SUPPRESSION
    MIL-PRF-39016-13 Revision K:2013 Relays, Electromagnetic, Established Reliability, DPDT, Low Level to 2 Amperes (0.150-Inch Terminal Spacing)
    MIL-PRF-39016-48 Revision D:2013 Relays, Electromagnetic, Established Reliability, DPDT, Low Level to 0.5 Ampere (.100 D.I.P. Terminal Spacing) One-Tenth Size, Sensitive, Monostable
    MIL-PRF-39016-36 Revision C:2006 Relays, Electromagnetic, Established Reliability, Hermetically Sealed, 4PDT, Low Level to 2 Amperes (.150-Inch Terminal Spacing), Latching, with Internal Diodes for Coil Transient Suppression and Reverse Polarity Protection
    MIL R 5757/7 : G RELAYS, ELECTROMAGNETIC, HERMETICALLY SEALED, 4PDT, LOW LEVEL TO 2 AMPERES
    MIL-PRF-39016-23 Revision F:2005 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, SPDT, LOW LEVEL TO 1.0 AMPERE WITH INTERNAL DIODE FOR COIL TRANSIENT SUPPRESSION
    MIL-PRF-39016-19 Revision H:2005 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, DPDT, LOW LEVEL TO 1 AMPERE WITH INTERNAL DIODE FOR COIL TRANSIENT SUPPRESSION AND POLARITY REVERSAL PROTECTION, TERMINALS 0.100-INCH GRID PATTERN
    DSCC 84172 : F RELAYS, ELECTROMAGNETIC, HIGH VIBRATION, DPDT, LOW LEVEL TO 1.0 AMPERE
    MIL-PRF-39016-29 Revision H:2017 Relays, Electromagnetic, Established Reliability, DPDT, Low Level to 1.0 Ampere (Latching) with Internal Diodes for Coil Transient Suppression
    MIL-PRF-83726 Revision H:2017 Relays, Hybrid and Solid State, Time Delay, General Specification for
    MIL-PRF-39016-12 Revision H:2016 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, DPDT, LOW LEVEL TO 1.0 AMPERE (LATCHING)
    MIL-PRF-39016-35 Revision E:2017 Relays, Electromagnetic, Established Reliability, Hermetically Sealed, 4 PDT Low Level to 2 Amperes (0.150-Inch Terminal Spacing), Latching, with Internal Diodes for Coil Transient Suppression
    MIL-PRF-39016-42 Revision E:2006 Relays, Electromagnetic, Established Reliability, DPDT, Low Level to 1.0 Ampere with Internal Diode for Coil Transient Suppression, Terminals .100-Inch Grid Pattern (Sensitive 60 Milliwatts, Coil Operate Power at 25 Degree C)
    MIL-R-39016-34 Revision F:2006 Relays, Electromagnetic, DPDT, Low Level to 1.0 Ampere, (0.100-Inch Terminal Spacing) (No S/S Document)
    MIL-PRF-39016-16 Revision G:2004 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, DPDT, LOW LEVEL TO 1.0 AMPERE (SENSITIVE, 60 MILLIWATTS) WITH INTERNAL DIODE FOR COIL TRANSIENT SUPPRESSION
    MIL R 39016/32 : F RELAYS, ELECTROMAGNETIC, DPDT, LOW LEVEL TO 2 AMPERES (LATCHING)
    MIL-PRF-39016-9 Revision K:2016 Relays, Electromagnetic, Established Reliability, DPDT, Low Level to 1.0 Ampere
    MIL-PRF-39016-17 Revision J:2017 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, DPDT, LOW LEVEL TO 1 AMPERE TERMINALS 0.100-INCH GRID PATTERN
    MIL-PRF-39016-43 Revision E:2005 Relays, Electromagnetic, Established Reliability, DPDT, Low Level to 1.0 Ampere, with Internal Diodes for Coil Transient Suppression, and Polarity Reversal Protection Terminals 0.100-Inch Grid Pattern (Sensitive, 60 Milliwatts, Coil Operate Power at 25 Degrees C)
    MIL R 5757/1 : K RELAYS, ELECTRICAL, HERMETICALLY SEALED, 6PDT, LOW LEVEL TO 2 AMPERES
    MIL-PRF-39016-10 Revision G:2004 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, SPDT, LOW LEVEL TO 1.0 AMPERE (SENSITIVE, 40 MILLIWATTS, COIL OPERATE POWER AT 25 DEGREES C)

    Standards Referencing This Book - (Show below) - (Hide below)

    MIL-STD-202-212 Base Document:2015 METHOD 212, ACCELERATION
    MIL-STD-202-211 Base Document:2015 METHOD 211, TERMINAL STRENGTH
    MIL-STD-202-302 Base Document:2015 METHOD 302, INSULATION RESISTANCE
    MIL-STD-883 Revision K:2016 TEST METHOD STANDARD - MICROCIRCUITS
    MIL-STD-202-210 Base Document:2015 METHOD 210, RESISTANCE TO SOLDERING HEAT
    MIL-STD-1276 Revision H:2013 Leads for Electronic Component Parts
    MIL-STD-202-303 Base Document:2015 METHOD 303, DC RESISTANCE
    MIL-STD-1686 Revision C:1995 ELECTROSTATIC DISCHARGE CONTROL PROGRAM FOR PROTECTION OF ELECTRICAL AND ELECTRONIC PARTS, ASSEMBLIES AND EQUIPMENT (EXCLUDING ELECTRICALLY INITIATED EXPLOSIVE DEVICES)
    MIL-STD-202-101 Base Document:2015 METHOD 101, SALT ATMOSPHERE (CORROSION)
    MIL-STD-750 Revision F:2011 TEST METHODS FOR SEMICONDUCTOR DEVICES
    MIL-STD-202-107 Base Document:2015 METHOD 107, THERMAL SHOCK
    MIL-STD-202-301 Base Document:2015 METHOD 301, DIELECTRIC WITHSTANDING VOLTAGE
    MIL-HDBK-338 Revision B:1998 ELECTRONIC RELIABILITY DESIGN HANDBOOK
    IEEE 315 : 1975 GRAPHIC SYMBOLS FOR ELECTRICAL AND ELECTRONICS DIAGRAMS (INCLUDING REFERENCE DESIGNATION LETTERS)
    MIL-STD-202-215 Base Document:2015 METHOD 215, RESISTANCE TO SOLVENTS
    MIL-STD-790 Revision G:2011 ESTABLISHED RELIABILITY AND HIGH RELIABILITY QUALIFIED PRODUCTS LIST (QPL) SYSTEMS FOR ELECTRICAL, ELECTRONIC, AND FIBER OPTIC PARTS SPECIFICATIONS
    MIL-HDBK-263 Revision B:1994 ELECTROSTATIC DISCHARGE CONTROL HANDBOOK FOR PROTECTION OF ELECTRICAL & ELECTRONIC PARTS, ASSEMBLIES & EQUIPMENT
    MIL-STD-202-105 Base Document:2015 METHOD 105, BAROMETRIC PRESSURE (REDUCED)
    MIL-STD-202-208 Base Document:2015 METHOD 208, SOLDERABILITY
    MIL-STD-202 Revision H:2015 ELECTRONIC AND ELECTRICAL COMPONENT PARTS
    MIL-STD-1285 Revision D:2004 MARKING OF ELECTRICAL AND ELECTRONIC PARTS
    EIA 557 : 2006 STATISTICAL PROCESS CONTROL SYSTEMS
    MIL-STD-202-214 Base Document:2015 METHOD 214, RANDOM VIBRATION
    MIL-STD-690 Revision D:2005 Failure Rate (FR) Sampling Plans and Procedures
    MIL-STD-202-312 Base Document:2015 METHOD 312, LIFE, INTERMEDIATE CURRENT SWITCHING
    MIL-STD-202-204 Base Document:2015 METHOD 204, VIBRATION, HIGH FREQUENCY
    MIL-STD-202-112 Base Document:2015 METHOD 112, SEAL
    MIL-STD-202-213 Base Document:2015 METHOD 213, SHOCK (SPECIFIED PULSE)
    MIL-STD-202-307 Base Document:2015 METHOD 307, CONTACT RESISTANCE
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective