NEMA MW 1000 : 2016

Superseded

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View superseded by

MAGNET WIRE

Available format(s):

Superseded date: 20-08-2022

Language(s):

Published date: 06-12-2012

Publisher: National Electrical Manufacturers Association

Table of Contents - (Show below) - (Hide below)

Foreword
How to Use this Publication
Part 1 - General
1.1 Scope
1.2 References
1.3 Definitions
1.4 Materials
1.5 Manufacturing
1.6 Test Conditions and Parameters
1.7 Units Of Measure
1.8 Thermal Class Of Magnet Wire
1.9 Ordering Information
Part 2 - Properties and Requirements
Part 3 - Test Procedures
Annexes
A - Reference Magnet Wire Test Conditions and Procedures
B - Magnet Wire Packaging and Labeling
C - Cross Reference of NEMA and IEC Magnet Wire
    Specifications
D - Formulas for the Determination of Dimensional and
    Performance Requirements
E - General Rules for Rectangular Wire Dimensions
F - Properties of Selected Refrigerants
G - Recommended Winding Tensions for Round Copper and
    Aluminum Film-Insulated Magnet Wire
H - Requirements and Test Procedures for MW 85-C
    According to IEC 60317-56

Abstract - (Show below) - (Hide below)

Specifies to present in concise and convenient form all existing NEMA standards for magnet wire.

General Product Information - (Show below) - (Hide below)

Development Note	Supersedes J W 1177, J W 1177/2 to /6, J W 1177/9 to /16, J W 1177/18 to /26, J W 1177/28 to /44 and J W 1177/46 to /47. (10/2002) Supplement is also available separately, See NEMA MW 1000 SUPP. (06/2015)
Document Type	Standard
ISBN
Pages
Published
Publisher	National Electrical Manufacturers Association
Status	Superseded
Superseded By	ANSI/NEMA MW 1000:2018
Supersedes	J-W-1177-47 Base Document:1988 J-W-1177-12 Revision B:1988 J-W-1177-11 Revision B:1988 J-W-1177-42 Base Document:1988 J-W-1177-19 Revision B:1988 J-W-1177-26 Revision B:1988 J-W-1177-24 Revision B:1988 J-W-1177-29 Base Document:1988 J-W-1177-18 Revision B:1988 J-W-1177-41 Base Document:1988 J-W-1177-2 Revision B:1988 J-W-1177-9 Revision B:1988 J-W-1177-21 Revision B:1988 J-W-1177-37 Base Document:1988 J-W-1177-10 Revision B:1988 J-W-1177-25 Revision B:1988 J-W-1177-23 Revision B:1988 J-W-1177-34 Base Document:1988 J-W-1177-6 Revision B:1988 J-W-1177 Revision B:1988 J-W-1177-39 Base Document:1988 J-W-1177-15 Revision B:1988 J-W-1177-20 Revision B:1988 J-W-1177-35 Base Document:1988 J-W-1177-31 Base Document:0198 J-W-1177-28 Base Document:1988 J-W-1177-38 Base Document:1988 J-W-1177-43 Base Document:1988 J-W-1177-36 Base Document:1988 J-W-1177-40 Base Document:1988 J-W-1177-46 Base Document:1988 J-W-1177-16 Revision B:1988 J-W-1177-5 Revision B:1988 J-W-1177-4 Revision B:1988 J-W-1177-33 Base Document:1988 J-W-1177-3 Revision B:1988 J-W-1177-30 Base Document:1988 J-W-1177-44 Base Document:1988 J-W-1177-32 Base Document:1988 J-W-1177-13 Revision B:1988 J-W-1177-22 Revision B:1988 J-W-1177-14 Revision B:0198

Standards Referenced By This Book - (Show below) - (Hide below)

MIL-STD-981 Revision C:2010	DESIGN, MANUFACTURING AND QUALITY STANDARDS FOR CUSTOM ELECTROMAGNETIC DEVICES FOR SPACE APPLICATIONS
MIL-DTL-28778 Revision A:2005	TRANSFORMER, POWER, STEPUP, 3 PHASE
J-W-1177 Revision B:1988	WIRE, MAGNET, ELECTRICAL, GENERAL SPECIFICATION
MIL-DTL-13253 Revision E:2007	HANDSETS, GENERAL SPECIFICATION FOR
MIL-DTL-81963 Revision C:2011	SERVOCOMPONENTS, PRECISION INSTRUMENT, ROTATING, COMMON REQUIREMENTS AND TESTS, GENERAL SPECIFICATION FOR
MIL-DTL-15514 Revision G:2016	TELEPHONE EQUIPMENT, SOUND POWERED TELEPHONE HANDSET, HEADSET - CHEST SET, AND HEADSET - CHEST SET, NOISE ATTENUATING
SAE AS 4914 : 2016	AIRCRAFT FLUORESCENT LIGHTING BALLAST/FIXTURE SAFETY STANDARD
IEEE C57.154-2012	IEEE Standard for the Design, Testing, and Application of Liquid-Immersed Distribution, Power, and Regulating Transformers Using High-Temperature Insulation Systems and Operating at Elevated Temperatures
MIL-R-83516 Revision C:2017	Relays, Reed, Dry, General Specification for (No S/S Document)
MIL-DTL-32408 Base Document:2012	INTEGRAL MOTOR PUMP (IMP)
MIL-DTL-3124 Revision E:2014	GENERATOR, ALTERNATING CURRENT, 60-HERTZ (NAVAL SHIPBOARD USE)
ASHRAE HDBK REFRIGERATION : 2014	ASHRAE HANDBOOK - REFRIGERATION
PD IEC/TS 62332-2:2014	Electrical insulation systems (EIS). Thermal evaluation of combined liquid and solid components Simplified test
MIL-DTL-2212 Revision K:2014	CONTACTORS AND CONTROLLERS, ELECTRIC MOTOR AC OR DC, AND ASSOCIATED SWITCHING DEVICES
MIL-DTL-917 Revision F:2014	ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS FOR
MIL-T-27-261 Revision B:2009	TRANSFORMERS AND INDUCTORS (AUDIO, POWER, AND HIGH-POWER PULSE) INDUCTORS, POWER (100 VA)
MIL-PRF-28861 Revision E:2016	FILTERS AND CAPACITORS, RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE SUPPRESSION, GENERAL SPECIFICATION FOR
MIL-DTL-17060 Revision G:2009	MOTORS, ALTERNATING CURRENT, INTEGRAL-HORSEPOWER, SHIPBOARD USE
MIL STD 11991 : A	GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES
MIL-DTL-12606 Revision E:2000	LOUDSPEAKER, PERMANENT MAGNET (UNENCASED, 3-INCH AND 4-INCH DIAMETER CONE, 2-WATT; FUNGUS-, AND IMMERSION-RESISTANT), TYPE LS-445/U, M12606-01, AND M12606-02
IEC TS 62332-2:2014	Electrical insulation systems (EIS) - Thermal evaluation of combined liquid and solid components - Part 2: Simplified test
ASTM F 792 : 2017	Standard Practice for Evaluating the Imaging Performance of Security X-Ray Systems
NEMA MW 765:2003(R2013)	Reclaiming of Magnet Wire Packaging
ANSI/NEMA MW 1000:2015	Supplement to ANSI/NEMA MW 1000 Reference Requirements for Round Film-insulated Magnet Wire
ASTM D 3955 : 2013 : REDLINE	Standard Specification for Electrical Insulating Varnishes
NEMA MW 780:2005(R2016)	Returnable Packaging for 24x6 Magnet Wire Reels
ASTM F 792 : 2017 : EDT 1	Standard Practice for Evaluating the Imaging Performance of Security X-Ray Systems
NEMA RE 2:1999	Electrical Insulating Varnish
ASTM D 3353 : 2018 : REDLINE	Standard Test Methods for Fibrous-Insulated Magnet Wire
IEEE C57.100-2011	IEEE Standard Test Procedure for Thermal Evaluation of Insulation Systems for Liquid-Immersed Distribution and Power Transformers
IEEE 1068-2015 REDLINE	IEEE Standard for the Repair and Rewinding of AC Electric Motors in the Petroleum, Chemical, and Process Industries

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart