Skip to content
Please enter a keyword to search

  • NF EN 60068 2-27 : 2009

    Current The latest, up-to-date edition.

    ENVIRONMENTAL TESTING - PART 2-27: TESTS - TEST EA AND GUIDANCE: SHOCK

    Available format(s): 

    Language(s): 

    Published date:  12-01-2013

    Publisher:  Association Francaise de Normalisation

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    AVANT-PROPOS
    INTRODUCTION
    1 Domaine d'application
    2 Références normatives
    3 Termes et définitions
    4 Description de l'appareillage d'essai
       4.1 Caractéristiques requises
       4.2 Chaîne de mesure
       4.3 Fixation
    5 Sévérités
    6 Pré-conditionnement
    7 Mesures initiales et essai de performance de
       fonctionnement
    8 Epreuve
    9 Reprise
    10 Mesures finales
    11 Renseignements que doit donner la spécification
       particulière
    12 Renseignements à fournir dans le rapport d'essai
    Annexe A (normative) Sélection et application des formes
             d'impulsion - Guide
    Annexe B (informative) Spectres de réponse aux chocs et
             autres caractéristiques des formes d'impulsion
    Annexe C (informative) Comparaison entre essais d'impact
    Annexe ZA (normative) Références normatives à d'autres
              publications internationales avec les publications
              européennes correspondantes
    Bibliographie

    Abstract - (Show below) - (Hide below)

    Cette partie de la CEI 60068 fournit un mode opératoire normalisé pour déterminer l'aptitude d'un spécimen à supporter des chocs répétitifs ou non répétitifs de sévérités spécifiées. Le but de cet essai est de mettre en évidence une défaillance mécanique et/ou une dégradation des performances spécifiées, ou les dommages ou dégradations cumulés dus aux chocs. Il peut aussi être utilisé dans certains cas, conjointement à la spécification particulière, pour déterminer la robustesse de structure des spécimens ou comme essai d'assurance de la qualité. Cet essai est en premier lieu destiné aux spécimens non emballés et aux éléments placés dans leur coffret de transport lorsque ce dernier peut être considéré comme faisant partie du spécimen. Si un élément est à soumettre aux essais en étant non emballé, il est désigné comme un spécimen d'essai.

    General Product Information - (Show below) - (Hide below)

    Development Note Indice de classement: C20-727. PR NF EN 60068 2-27 December 2006. (12/2006) Supersedes NF EN 60068 2-29. (07/2015)
    Document Type Standard
    Publisher Association Francaise de Normalisation
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    NF EN 60947-5-1 : 2004 AMD 1 2009 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
    NF EN 45502-2-1 : 2004 ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-1: PARTICULAR REQUIREMENTS FOR ACTIVE IMPLANTABLE MEDICAL DEVICES INTENDED TO TREAT BRADYARRHYTHMIA (CARDIAC PACEMAKERS)
    NF EN 12830 : 1999 TEMPERATURE RECORDERS FOR THE TRANSPORT, STORAGE AND DISTRIBUTION OF CHILLED, FROZEN, DEEP-FROZEN/QUICK-FROZEN FOOD AND ICE CREAM - TESTS, PERFORMANCE, SUITABILITY
    NF EN 60947-5-5 : 1998 AMD 2 2017 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTRICAL EMERGENCY STOP DEVICE WITH MECHANICAL LATCHING FUNCTION
    NF EN 60122-1 : 2003 QUARTZ CRYSTAL UNITS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
    NF EN 62025-2 : 2005 HIGH FREQUENCY INDUCTIVE COMPONENTS - NON-ELECTRICAL CHARACTERISTICS AND MEASURING METHODS - PART 2: TEST METHODS FOR NON-ELECTRICAL CHARACTERISTICS
    NF EN ISO 11608-4 : 2007 PEN-INJECTORS FOR MEDICAL USE - PART 4: REQUIREMENTS AND TEST METHODS FOR ELECTRONIC AND ELECTROMECHANICAL PEN-INJECTORS
    NF EN 60255 21-2 : 1998 ELECTRICAL RELAYS - PART 21: VIBRATION, SHOCK, BUMP AND SEISMIC TESTS ON MEASURING RELAYS AND PROTECTION EQUIPMENT - SECTION 2: SHOCK AND BUMP TESTS
    NF EN 60761-2 : 2005 EQUIPMENT FOR CONTINUOUS MONITORING RADIOACTIVITY IN GASEOUS EFFLUENTS - PART 2: SPECIFIC REQUIREMENTS FOR AEROSOLS MONITORS INCLUDING TRANSURANIC AEROSOLS
    NF EN 60761-5 : 2005 EQUIPMENT FOR CONTINUOUS MONITORING RADIOACTIVITY IN GASEOUS EFFLUENTS - PART 5: SPECIFIC REQUIREMENTS FOR TRITIUM MONITORS
    NF EN 50132-4-1 : 2002 ALARM SYSTEMS - CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 4-1: BLACK AND WHITE MONITORS
    NF EN 60749-10 : 2002 SEMICONDUCTOR DEVICES - MECHANICAL AND CLIMATIC TEST METHODS - PART 10: MECHANICAL SHOCK
    NF EN 61582 : 2006 RADIATION PROTECTION INSTRUMENTATION - IN VIVO COUNTERS - CLASSIFICATION, GENERAL REQUIREMENTS AND TEST PROCEDURES FOR PORTABLE, TRANSPORTABLE AND INSTALLED EQUIPMENT
    NF EN 54-24 : 2008 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 24: COMPONENTS OF VOICE ALARM SYSTEMS - LOUDSPEAKERS
    NF EN 60068 2-32 : 1994 BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 2: TESTS - TEST ED: FREE FALL
    NF EN 60938-1 : 2008 AMD 1 2008 FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
    NF EN 62052-11 : 2003 AMD 1 2017 ELECTRICITY METERING EQUIPMENT (A.C.) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 11: METERING EQUIPMENT
    NF EN 60761-3 : 2005 EQUIPMENT FOR CONTINUOUS MONITORING RADIOACTIVITY IN GASEOUS EFFLUENTS - PART 3: SPECIFIC REQUIREMENTS FOR RADIOACTIVE NOBLE GAS MONITORS
    NF EN 60947 5-2 : 2008 AMD 1 2013 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-2: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - PROXIMITY SWITCHES
    NFE 09 031 : 2017 PEDAL SWITCHES FOR STARTING AND STOPPING - TECHNICAL SPECIFICATIONS FOR ACCIDENT PREVENTION
    NF EN 60068 2-31 : 2008 ENVIRONMENTAL TESTING - PART 2-31: TESTS - TEST EC: ROUGH HANDLING SHOCKS, PRIMARILY FOR EQUIPMENT-TYPE SPECIMENS
    NF EN 14803 : 2006 IDENTIFICATION AND/OR DETERMINATION OF THE QUANTITY OF WASTE
    NF EN 54-7 : 2001 AMD 2 2006 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 7: SMOKE DETECTORS - POINT DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONIZATION
    NF EN 62093 : 2005 BALANCE-OF SYSTEM COMPONENTS FOR PHOTOVOLTAIC SYSTEMS - DESIGN QUALIFICATION NATURAL ENVIRONMENTS
    NF EN 61291 5-2 : 2003 OPTICAL AMPLIFIERS - PART 5-2: QUALIFICATION SPECIFICATIONS - RELIABILITY QUALIFICATION FOR OPTICAL FIBRE AMPLIFIERS
    NF EN 60068 2-29 : 1994 BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 2: TESTS - TEST EB AND GUIDANCE: BUMP
    NF EN 60947-5-8 : 2007 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-8: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - THREE-POSITION ENABLING SWITCHES
    NF EN 60325 : 2004 RADIATION PROTECTION INSTRUMENTATION - ALPHA, BETA AND ALPHA/BETA (BETA ENERGY > 60 KEV) CONTAMINATION METERS AND MONITORS
    NF EN 45502-2-2 : 2008 ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-2: PARTICULAR REQUIREMENTS FOR ACTIVE IMPLANTABLE MEDICAL DEVICES INTENDED TO TREAT TACHYARRHYTHMIA (INCLUDES IMPLANTABLE DEFIBRILLATORS)
    NFP 99 306-1 : 2006 ROAD TRAFFIC DATA - ELABORATION, STORAGE, DISTRIBUTION - DOPPLER-FIZEAU RADAR VEHICLE DETECTION UNITS AND DETECTORS - PART 1: CHARACTERISTICS
    NF EN 62052-21 : 2006 ELECTRICITY METERING EQUIPMENT (A.C.) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT
    NF EN 62022 : 2008 INSTALLED MONITORS FOR THE CONTROL AND DETECTION OF GAMMA RADIATIONS CONTAINED IN RECYCLABLE OR NON RECYCLABLE MATERIALS TRANSPORTED BY VEHICLES
    NF EN 60761-1 : 2005 EQUIPMENT FOR CONTINUOUS MONITORING RADIOACTIVITY IN GASEOUS EFFLUENTS - PART 1: GENERAL REQUIREMENTS
    NF EN 60761-4 : 2005 EQUIPMENT FOR CONTINUOUS MONITORING RADIOACTIVITY IN GASEOUS EFFLUENTS - PART 4: SPECIFIC REQUIREMENTS FOR IODINE MONITORS
    NFP 99 253 : 2014 ROAD EQUIPMENT - EMERGENCY CALL NETWORK - TECHNICAL CHARACTERISTICS OF EMERGENCY ROADSIDE PHONES AND CENTRAL CONTROL STATIONS
    NFE 18 100 : 2013 INDICATEURS ET INTEGRATEURS DE TEMPS/TEMPERATURE - ESSAIS ET PERFORMANCES
    NF EN 50132-2-1 : 1997 ALARM SYSTEMS - CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 2-1: BLACK AND WHITE CAMERAS
    NF EN 60947-1 : 2007 AMD 2 2015 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
    NF EN 62319-1 : 2005 POLYMERIC THERMISTORS - DIRECTLY HEATED POSITIVE STEP FUNCTION TEMPERATURE COEFFICIENT - PART 1: GENERIC SPECIFICATION

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 60068-1:2013 Environmental testing - Part 1: General and guidance
    IEC 60721-3-5:1997 Classification of environmental conditions - Part 3: Classificationof groups of environmental parameters and their severities -Section 5: Ground vehicle installations
    IEC 60068-2-47:2005 Environmental testing - Part 2-47: Test - Mounting of specimens for vibration, impact and similar dynamic tests
    NF EN 60068-2-47 : 2005 ENVIRONMENTAL TESTING - PART 2-47: TEST METHODS - MOUNTING OF COMPONENTS, EQUIPMENT AND OTHER ARTICLES FOR VIBRATION, IMPACT AND SIMILAR DYNAMIC TESTS
    NF EN 60068-1 : 2014 ENVIRONMENTAL TESTING - PART 1: GENERAL AND GUIDANCE
    IEC GUIDE 104:2010 The preparation of safety publications and the use of basic safety publications and group safety publications
    IEC 60068-2-55:2013 Environmental testing - Part 2-55: Tests - Test Ee and guidance - Loose cargo testing including bounce
    NF EN 60721 3-5 : 1997 CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES - GROUND VEHICLE INSTALLATIONS
    NF EN 60068 2-55 : 2013 ENVIRONMENTAL TESTING - PART 2-55: TESTS - TEST EE AND GUIDANCE - LOOSE CARGO TESTING INCLUDING BOUNCE
    NF EN 60721 3-1 : 1997 CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES - STORAGE
    IEC 60721-3-1:1997 Classification of environmental conditions - Part 3 Classification of groups of environmental parameters and their severities - Section 1: Storage
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective