Skip to content
Please enter a keyword to search

  • NF EN 60603-7-4 : 2010

    Current The latest, up-to-date edition.

    CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-4: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 250 MHZ

    Available format(s): 

    Language(s): 

    Published date:  12-01-2013

    Publisher:  Association Francaise de Normalisation

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    AVANT-PROPOS
    INTRODUCTION
    1 Généralités
      1.1 Domaine d'application
      1.2 Références normatives
    2 Désignation de type CEI
      2.1 Termes et définitions
    3 Caractéristiques communes et vue isométrique
      3.1 Vue isométrique
      3.2 Informations relatives à l'accouplement
    4 Sorties de câble et connexions internes - Embases et fiches
      4.1 Généralités
      4.2 Types de sorties
    5 Calibres
      5.1 Embases
      5.2 Fiches
    6 Caractéristiques
      6.1 Généralités
      6.2 Affectation de groupement des broches et des paires
      6.3 Classification en catégories climatiques
      6.4 Caractéristiques électrique
      6.5 Caractéristiques de transmission
      6.6 Caractéristiques mécaniques
    7 Essais et programmes d'essai
      7.1 Généralités
      7.2 Disposition pour l'essai de la résistance de contact
      7.3 Disposition pour l'essai de vibrations (phase d'essai
          CP1)
      7.4 Procédures d'essai et méthodes de mesure
      7.5 Préconditionnement
      7.6 Câblage et montage des spécimens
      7.7 Programmes d'essais
    Annexe A (normative) Procédure de continuité de calibrage
    Annexe B (normative) Fonctionnement mécanique du dispositif
                         de verrouillage
    Annexe C (normative) Exigences pour la fiche d'essai
    Annexe D (normative) Exigences générales pour le montage de
                         mesure
    Annexe E (normative) Perte d'insertion
    Annexe F (normative) Affaiblissement de réflexion
    Annexe G (normative) Paradiaphonie
    Annexe H (normative) Télédiaphonie
    Annexe I (normative) Perte de conversion transverse (TCL) et
                         perte de transfert de conversion
                         transverse (TCTL)
    Annexe J (normative) Sortie de symétriseur
    Annexe K (normative) Exigences de calibre
    Annexe ZA (normative) Références normatives à d'autres
                          publications internationales avec les
                          publications européennes correspondantes

    Abstract - (Show below) - (Hide below)

    Covers 8-way unshielded free and fixed connectors and specifies mechanical and environmental requirements and electrical transmission requirements for frequencies up to 250 MHz.

    General Product Information - (Show below) - (Hide below)

    Development Note Indice de classement: C93-430-7-4. (06/2005) PR NF EN 60603-7-4 March 2010. (03/2010)
    Document Type Standard
    Publisher Association Francaise de Normalisation
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    NF EN 60512-26-100 : 2009 AMD 1 2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 26-100: MEASUREMENT SETUP, TEST AND REFERENCE ARRANGEMENTS AND MEASUREMENTS FOR CONNECTORS ACCORDING TO IEC 60603-7 - TESTS 26A TO 26G
    NF EN 61076-3-116 : 2009 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-116: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 13 RELATED TO IEC 61076-3-106 - LOCKING LEVER
    NF EN 60512-25-9 : 2009 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 25-9: SIGNAL INTEGRITY TESTS - TEST 25I: ALIEN CROSSTALK

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 61076-1:2006 Connectors for electronic equipment - Product requirements - Part 1: Generic specification
    IEC 60352-3:1993 Solderless connections - Part 3: Solderless accessible insulation displacement connections - General requirements, test methods and practical guidance
    IEC 60352-6:1997 Solderless connections - Part 6: Insulation piercing connections - General requirements, test methods and practical guidance
    IEC 60068-1:2013 Environmental testing - Part 1: General and guidance
    IEC 60603-7-2:2010 Connectors for electronic equipment - Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz
    ISO/IEC 11801:2002 Information technology Generic cabling for customer premises
    IEC 60068-2-38:2009 Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test
    IEC 60352-1:1997 Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance
    ISO 1302:2002 Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation
    IEC 61156-2:2010 Multicore and symmetrical pair/quad cables for digital communications - Part 2: Symmetrical pair/quad cables with transmission characteristics up to 100 MHz - Horizontal floor wiring - Sectional specification
    IEC 60603-7:2008+AMD1:2011 CSV Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors
    IEC 60352-5:2012 Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance
    IEC 60512-1-100:2012 Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications
    IEC 61156-1:2007+AMD1:2009 CSV Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification
    IEC 60352-2:2006+AMD1:2013 CSV Solderless connections - Part 2: Crimped connections - Generalrequirements, test methods and practical guidance
    IEC 61156-5:2009+AMD1:2012 CSV Multicore and symmetrical pair/quad cables for digital communications - Part 5: Symmetrical pair/quad cables withtransmission characteristics up to 1 000 MHz - Horizontal floorwiring - Sectional specification
    IEC 61156-4:2009 Multicore and symmetrical pair/quad cables for digital communications - Part 4: Riser cables - Sectional specification
    IEC 61156-3:2008 Multicore and symmetrical pair/quad cables for digital communications - Part 3: Work area cable - Sectional specification
    IEC 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
    EN 50289-1-14:2004 Communication cables - Specifications for test methods - Part 1-14: Electrical test methods - Coupling attenuation or screening attenuation of connecting hardware
    IEC 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
    IEC 60050-581:2008 International Electrotechnical Vocabulary (IEV) - Part 581: Electromechanical components for electronic equipment
    IEC 60352-7:2002 Solderless connections - Part 7: Spring clamp connections - General requirements, test methods and practical guidance
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective