Skip to content
Please enter a keyword to search
  • Preview

    S.R. CEN/TS 15679:2007

    Current The latest, up-to-date edition.

    THERMAL MODIFIED TIMBER - DEFINITIONS AND CHARACTERISTICS

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  01-01-2007

    Publisher:  National Standards Authority of Ireland

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    Introduction
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Symbols and abbreviations
    5 Characteristics
      5.1 General
      5.2 Equilibrium moisture content
      5.3 Dimensional stability
      5.4 Durability: resistance to attack by fungi
      5.5 Density
      5.6 Mechanical properties
           5.6.1 Bending strength and modulus of elasticity
           5.6.2 Impact strength
           5.6.3 Surface hardness
           5.6.4 Tension perpendicular to grain
           5.6.5 Compression strength
           5.6.6 Strength of mechanical fasteners
      5.7 Thermal conductivity
      5.8 Adhesive bonding of TMT
      5.9 Adhesion of coating to TMT
      5.10 Emissions
      5.11 Reaction to fire
      5.12 Durability: resistance to attack by insects
      5.13 Colour
    6 Assessment of characteristics
      6.1 General
      6.2 Sampling
      6.3 Factory production control
           6.3.1 General
           6.3.2 Characteristics of the TMT product to be controlled
    7 Marking
    Annex A (informative) Examples of characteristics
          A.1 Equilibrium moisture content
          A.2 Dimensional stab
          A.3 Biological durability
    Bibliography

    Abstract - (Show below) - (Hide below)

    Provides definitions and characteristics for Thermally Modified Timber.

    General Product Information - (Show below) - (Hide below)

    Document Type Standard
    Publisher National Standards Authority of Ireland
    Status Current

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 7724-1:1984 Paints and varnishes Colorimetry Part 1: Principles
    EN 844-2 : 1997 ROUND AND SAWN TIMBER - TERMINOLOGY - PART 2: GENERAL TERMS RELATING TO ROUND TIMBER
    EN 20-2:1993 Wood preservatives - Determination of the protective effectiveness against Lyctus brunneus (Stephens) - Part 2: Application by impregnation (Laboratory method)
    EN 12667:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance
    EN 13183-1:2002/AC:2003 MOISTURE CONTENT OF A PIECE OF SAWN TIMBER - DETERMINATION BY OVEN DRY METHOD
    ISO 13787:2003 Thermal insulation products for building equipment and industrial installations Determination of declared thermal conductivity
    EN 335-2:2006 Durability of wood and wood-based products - Definition of use classes - Part 2: Application to solid wood
    EN 1995-2:2004 Eurocode 5: Design of timber structures - Part 2: Bridges
    EN 310:1993 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
    EN 1910:2016 Wood flooring and wood panelling and cladding - Determination of dimensional stability
    EN 350-1:1994 Durability of wood and wood-based products - Natural durability of solid wood - Part 1: Guide to the principles of testing and classification of the natural durability of wood
    EN 844-8 : 1997 ROUND AND SAWN TIMBER - TERMINOLOGY - PART 8: TERMS RELATING TO FEATURES OF ROUND TIMBER
    ISO 105-A03:1993 Textiles Tests for colour fastness Part A03: Grey scale for assessing staining
    EN 84:1997 Wood preservatives - Accelerated ageing of treated wood prior to biological testing - Leaching procedure
    EN 204:2016 Classification of thermoplastic wood adhesives for non-structural applications
    EN 844-4 : 1997 ROUND AND SAWN TIMBER - TERMINOLOGY - PART 4: TERMS RELATING TO MOISTURE CONTENT
    EN 47:2016 Wood preservatives - Determination of the toxic values against larvae of Hylotrupes bajulus (Linnaeus) - (Laboratory method)
    ISO 7724-2:1984 Paints and varnishes Colorimetry Part 2: Colour measurement
    EN ISO 2409:2013 Paints and varnishes - Cross-cut test (ISO 2409:2013)
    EN 1380:2009 Timber structures - Test methods - Load bearing nails, screws, dowels and bolts
    EN 927-1:2013 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 1: Classification and selection
    EN 330:2014 Wood preservatives - Determination of the relative protective effectiveness of a wood preservative for use under a coating and exposed out-of-ground contact - Field test: L-joint method
    EN 844-5 : 1997 ROUND AND SAWN TIMBER - TERMINOLOGY - PART 5: TERMS RELATING TO DIMENSIONS OF ROUND TIMBER
    EN 275:1992 Wood preservatives - Determination of the protective effectiveness against marine borers
    EN 1382:2016 Timber Structures - Test methods - Withdrawal capacity of timber fasteners
    EN ISO 13787:2003 Thermal insulation products for building equipment and industrial installations - Determination of declared thermal conductivity (ISO 13787:2003)
    EN 844-11 : 1998 ROUND AND SAWN TIMBER - TERMINOLOGY - PART 11: TERMS RELATING TO DEGRADE BY INSECTS
    EN 1001-2:2005 Durability of wood and wood based products - Terminology - Part 2: Vocabulary
    EN 301:2017 Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements
    EN 844-7 : 1997 ROUND AND SAWN TIMBER - TERMINOLOGY - PART 7: TERMS RELATING TO ANATOMICAL STRUCTURE OF TIMBER
    EN ISO 179-1:2010 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010)
    EN 1383:2016 Timber structures - Test methods - Pull through resistance of timber fasteners
    EN 13823:2010+A1:2014 REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM
    EN 12524 : 2000 BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES
    ENV 807:2001 Wood preservatives - Determination of the effectiveness against soft rotting micro-fungi and other soil inhabiting micro-organisms
    EN 350-2:1994 Durability of wood and wood-based products - Natural durability of solid wood - Part 2: Guide to natural durability and treatability of selected wood species of importance in Europe
    ENV 12169 : 2000 CRITERIA FOR THE ASSESSMENT OF CONFORMITY OF A LOT OF SAWN TIMBER
    ISO 7724-3:1984 Paints and varnishes Colorimetry Part 3: Calculation of colour differences
    ISO 4624:2016 Paints and varnishes — Pull-off test for adhesion
    EN 14762 : 2006 WOOD FLOORING - SAMPLING PROCEDURES FOR EVALUATION OF CONFORMITY
    EN ISO 9239-1:2010 Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010)
    EN 320:2011 Particleboards and fibreboards - Determination of resistance to axial withdrawal of screws
    EN 844-3 : 1995 ROUND AND SAWN TIMBER - TERMINOLOGY - PART 3: GENERAL TERMS RELATING TO SAWN TIMBER
    EN 12664:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance
    EN 1995-1-2:2004/AC:2009 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-2: GENERAL - STRUCTURAL FIRE DESIGN
    EN ISO 16000-9:2006/AC:2007 INDOOR AIR - PART 9: DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS FROM BUILDING PRODUCTS AND FURNISHING - EMISSION TEST CHAMBER METHOD
    EN 408:2010+A1:2012 Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties
    EN 844-1 : 1995 ROUND AND SAWN TIMBER - TERMINOLOGY - PART 1: GENERAL TERMS COMMON TO ROUND TIMBER AND SAWN TIMBER
    EN 844-12 : 2000 ROUND AND SAWN TIMBER - TERMINOLOGY - PART 12: ADDITIONAL TERMS AND GENERAL INDEX
    ISO 16000-9:2006 Indoor air — Part 9: Determination of the emission of volatile organic compounds from building products and furnishing — Emission test chamber method
    EN 927-5:2006 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 5: Assessment of the liquid water permeability
    EN 927-2:2014 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 2: Performance specification
    EN 844-10 : 1998 FOUND AND SAWN TIMBER - TERMINOLOGY - PART 10: TERMS RELATING TO STAIN AND FUNGAL ATTACK
    CEN/TS 12037:2003 Wood preservatives - Field test method for determining the relative protective effectiveness of a wood preservative exposed out of ground contact - Horizontal lap-joint method
    EN ISO 4624:2016 Paints and varnishes - Pull-off test for adhesion (ISO 4624:2016)
    ISO 179-1:2010 Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
    EN 20105-A03 : 1994 TEXTILES - TESTS FOR COLOUR FASTNESS - PART A03: GREY SCALE FOR ASSESSING STAINING
    EN 117:2012 Wood preservatives - Determination of toxic values against Reticulitermes species (European termites) (Laboratory method)
    EN 460:1994 Durability of wood and wood-based products - Natural durability of solid wood - Guide to the durability requirements for wood to be used in hazard classes
    EN 844-6 : 1997 ROUND AND SAWN TIMBER - TERMINOLOGY - PART 6: TERMS RELATING TO DIMENSIONS OF SAWN TIMBER
    EN 1995-1-1:2004/A2:2014 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
    EN 252:2014 Field test method for determining the relative protective effectiveness of a wood preservative in ground contact
    EN 1534:2010 Wood flooring - Determination of resistance to indentation - Test method
    EN 383:2007 Timber Structures - Test methods - Determination of embedment strength and foundation values for dowel type fasteners
    ISO 9239-1:2010 Reaction to fire tests for floorings Part 1: Determination of the burning behaviour using a radiant heat source
    EN 927-6:2006 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water
    EN 335-1:2006 Durability of wood and wood- based products - Definition of use classes - Part 1: General
    ISO 2409:2013 Paints and varnishes Cross-cut test
    ENV 14464 : DRAFT 2002 SAWN TIMBER - METHOD FOR ASSESSMENT OF CASE-HARDENING
    EN 844-9 : 1997 ROUND AND SAWN TIMBER - TERMINOLOGY - PART 9: TERMS RELATING TO FEATURES OF SAWN TIMBER
    EN 113:1996/A1:2004 WOOD PRESERVATIVES - TEST METHOD FOR DETERMINING THE PROTECTIVE EFFECTIVENESS AGAINST WOOD DESTROYING BASIDIOMYCETES - DETERMINATION OF THE TOXIC VALUES
    EN 384:2016 Structural timber - Determination of characteristic values of mechanical properties and density
    CEN/TS 14966:2005 Wood-based panels - Small scale indicative test methods for certain mechanical properties
    EN 927-3:2012 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective