ISO 22498:2005
|
Plastics — Vinyl chloride homopolymer and copolymer resins — Particle size determination by mechanical sieving |
EN ISO 1043-3 : 1999
|
PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 3: PLASTICIZERS (ISO 1043-3:2016) |
ISO 3451-1:2008
|
Plastics Determination of ash Part 1: General methods |
EN ISO 180:2000/A2:2013
|
PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH (ISO 180:2000/AMD 2:2013) |
UNI 10667-2 : 2010
|
PLASTIC RAW-SECONDARY MATERIALS - POLYETHYLENE FOR GENERAL PURPOSES FROM THE RECYCLING OF INDUSTRIAL RESIDUES AND/OR FROM PRE AND/OR POST CONSUMER MATERIALS - PART 2: REQUIREMENTS AND TEST METHODS |
EN ISO 1043-1:2011/A1:2016
|
PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMER AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011/AMD 1:2016) |
CEN/TR 15353:2007
|
Plastics - Recycled plastics - Guidelines for the development of standards for recycled plastics |
EN 15343:2007
|
Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content |
EN ISO 527-2:2012
|
Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012) |
EN ISO 3451-1:2008
|
Plastics - Determination of ash - Part 1: General methods (ISO 3451-1:2008) |
EN ISO 178:2010/A1:2013
|
PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013) |
EN ISO 11542-1 : 2001
|
PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
EN ISO 527-1:2012
|
Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012) |
EN ISO 179-1:2010
|
Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010) |
ISO 527-2:2012
|
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
UNE 53971:1996 EX
|
PLASTICS. WASTE COLLECTION BAGS IN POLYETHYLEN (PE). ECOLOGICAL CRITERIA. |
EN ISO 1043-4:1999/A1:2016
|
PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 4: FLAME RETARDANTS (ISO 1043-4:1998/AMD 1:2016) |
ISO 3534-2:2006
|
Statistics Vocabulary and symbols Part 2: Applied statistics |
ISO 472:2013
|
Plastics Vocabulary |
ISO 180:2000
|
Plastics Determination of Izod impact strength |
EN ISO 9001:2015
|
Quality management systems - Requirements (ISO 9001:2015) |
ISO 1183-1:2012
|
Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method |
ISO 11542-1:2001
|
Plastics Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials Part 1: Designation system and basis for specifications |
ISO 9001:2015
|
Quality management systems — Requirements |
ISO 1043-3:2016
|
Plastics Symbols and abbreviated terms Part 3: Plasticizers |
ISO 179-1:2010
|
Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test |
ISO 1872-1:1993
|
Plastics Polyethylene (PE) moulding and extrusion materials Part 1: Designation system and basis for specifications |
EN 15348:2014
|
Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate) (PET) recyclates |
EN ISO 1872-1 : 1999
|
PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 1 - DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
EN ISO 1133:2005
|
PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THE THERMOPLASTICS |
ISO 178:2010
|
Plastics Determination of flexural properties |
ISO 1043-1:2011
|
Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
ISO 1043-4:1998
|
Plastics Symbols and abbreviated terms Part 4: Flame retardants |
ISO 1133:2005
|
Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics |
EN ISO 472:2013
|
Plastics - Vocabulary (ISO 472:2013) |
EN 12099:1997
|
Plastics piping systems - Polyethylene piping materials and components - Determination of volatile content |
EN ISO 1183-1:2012
|
Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012) |
ASTM D 5577 : 1994
|
Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics |
ISO 527-1:2012
|
Plastics Determination of tensile properties Part 1: General principles |