EN ISO 20566:2013
|
Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory-scale car-wash (ISO 20566:2013) |
EN ISO 14644-4:2001
|
Cleanrooms and associated controlled environments - Part 4: Design, construction and start-up (ISO 14644-4:2001) |
DIN EN ISO 20566:2013-06
|
Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory-scale car-wash (ISO 20566:2013) |
DIN EN ISO 4628-1:2016-07
|
PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 1: GENERAL INTRODUCTION AND DESIGNATION SYSTEM (ISO 4628-1:2016) |
EN ISO 4628-2:2016
|
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016) |
VDI 6022 Blatt 3:2011-07
|
Ventilation and indoor-air quality - Assessment of indoor-air quality |
DIN 10524:2012-04
|
FOOD HYGIENE - WORK WEAR IN FOOD BUSINESS |
DIN EN 828:2013-04
|
Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface |
DIN 10113-2:1997-07
|
Determination of surface colony count on fitment and utensils in foodareas - Part 2: Semiquantitative swab method |
ISO 15883-1:2006
|
Washer-disinfectors Part 1: General requirements, terms and definitions and tests |
EN ISO 11998 : 2006
|
Paints and varnishes - Determination of wet-scrub resistance and cleanability of coatings (ISO 11998:2006) |
EN ISO 22610:2006
|
Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment - Test method to determine the resistance to wet bacterial penetration (ISO 22610:2006) |
DIN EN ISO 14644-1:2016-06
|
CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 1: CLASSIFICATION OF AIR CLEANLINESS BY PARTICLE CONCENTRATION (ISO 14644-1:2015) |
DIN EN ISO 22612:2005-05
|
Clothing for protection against infectious agents - Test method for resistance to dry microbial penetration (ISO 22612:2005); German version EN ISO 22612:2005 |
VDI 4252 Blatt 2:2004-06
|
Measurement of airborne microorganisms and viruses in ambient air - Active sampling of bioaerosols - Separation of airborne mould on gelatine/polycarbonate filters |
ISO 14698-2:2003
|
Cleanrooms and associated controlled environments Biocontamination control Part 2: Evaluation and interpretation of biocontamination data |
DIN 10113-1:1997-07
|
Determination of surface colony count on fitment and utensils in foodareas - Part 1: Quantitative swab method |
EN 61340-5-1:2016/AC:2017-05
|
ELECTROSTATICS - PART 5-1: PROTECTION OF ELECTRONIC DEVICES FROM ELECTROSTATIC PHENOMENA - GENERAL REQUIREMENTS (IEC 61340-5-1:2016/COR1:2017) |
EN ISO 4628-1:2016
|
PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 1: GENERAL INTRODUCTION AND DESIGNATION SYSTEM (ISO 4628-1:2016) |
DIN EN 13523-16:2005-02
|
Coil coated metals - Test methods - Part 16: Resistance to abrasion |
VDE 0300-4-5 : 2005
|
ELECTROSTATICS - PART 4-5: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - METHODS FOR CHARACTERIZING THE ELECTROSTATIC PROTECTION OF FOOTWEAR AND FLOORING IN COMBINATION WITH A PERSON |
DIN EN ISO 846:1997-10
|
PLASTICS - EVALUATION OF THE ACTION OF MICROORGANISMS |
DVGW W 270 : 2007
|
MICROBIAL ENHANCEMENT ON MATERIALS TO COME INTO CONTACT WITH DRINKING WATER - TESTING AND ASSESSMENT |
ISO 4516:2002
|
Metallic and other inorganic coatings — Vickers and Knoop microhardness tests |
DIN EN 1650:2013-08
|
CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE SUSPENSION TEST FOR THE EVALUATION OF FUNGICIDAL OR YEASTICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS AND ANTISEPTICS USED IN FOOD, INDUSTRIAL, DOMESTIC AND INSTITUTIONAL AREAS - TEST METHOD AND REQUIREMENTS (PHASE 2, STEP 1) |
VDI 2083 Blatt 1:2013-01
|
Cleanroom technology - Particulate air cleanliness classes |
DIN EN 1040:2006-03
|
Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of basic bactericidal activity of chemical disinfectants and antiseptics - Test method and requirements (phase 1); German version EN 1040:2005 |
EN 13697:2015
|
Chemical disinfectants and antiseptics - Quantitative non-porous surface test for the evaluation of bactericidal and/or fungicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas - Test method and requirements without mechanical action (phase 2, step 2) |
IEC 61340-5-1:2016
|
Electrostatics - Part 5-1: Protection of electronic devices from electrostatic phenomena - General requirements |
PREN ISO 14644-9 : DRAFT 2008
|
CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 9: CLASSIFICATION OF SURFACE PARTICLE CLEANLINESS |
DIN EN 1276:2010-01
|
CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE SUSPENSION TEST FOR THE EVALUATION OF BACTERICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS AND ANTISEPTICS USED IN FOOD, INDUSTRIAL, DOMESTIC AND INSTITUTIONAL AREAS - TEST METHOD AND REQUIREMENTS (PHASE 2, STEP 1) |
DIN EN 1632-4:1995-02 (Draft)
|
CLEANROOM TECHNOLOGY - BIOCONTAMINATION CONTROL - PART 4: METHODS OF ANALYZING AND MEASURING AEROBIOCONTAMINATION IN ZONES AT RISK |
EN ISO 14577-1:2015
|
Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015) |
DIN EN ISO 4628-2:2016-07
|
PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 2: ASSESSMENT OF DEGREE OF BLISTERING (ISO 4628-2:2016) |
DIN EN ISO 22610:2015-12 (Draft)
|
SURGICAL DRAPES, GOWNS AND CLEAN AIR SUITS, USED AS MEDICAL DEVICES, FOR PATIENTS, CLINICAL STAFF AND EQUIPMENT - TEST METHOD TO DETERMINE THE RESISTANCE TO WET BACTERIAL PENETRATION |
DIN EN ISO 2812-1:2007-05
|
PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 1: IMMERSION IN LIQUIDS OTHER THAN WATER (ISO 2812-1:2017) |
ISO 846:1997
|
Plastics Evaluation of the action of microorganisms |
VDE 0300-5-1 : 2017
|
ELECTROSTATICS - PART 5-1: PROTECTION OF ELECTRONIC DEVICES FROM ELECTROSTATIC PHENOMENA - GENERAL REQUIREMENTS (IEC 61340-5-1:2016) |
DIN 53233:2016-03
|
PAINTS AND VARNISHES - DETERMINATION OF ABRASION BEHAVIOUR |
DIN EN ISO 14644-4:2003-06
|
Cleanrooms and associated controlled environments - Part 4: Design, construction and start up (ISO 14644-4:2001) |
PREN 828 : DRAFT 2010
|
ADHESIVES - WETTABILITY - DETERMINATION BY MEASUREMENT OF CONTACT ANGLE AND SURFACE FREE ENERGY OF SOLID SURFACE |
DIN EN ISO 4628-4:2016-07
|
PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 4: ASSESSMENT OF DEGREE OF CRACKING (ISO 4628-4:2016) |
VDI 2083 Blatt 4.1:2006-10
|
Cleanroom technology - Planning, construction and start-up of cleanrooms |
VDI 4253 Blatt 3:2008-08
|
Measurement of airborne microorganisms and viruses in ambient air - Culture based method for the quantitative determination of bacteria in air - Method after separation in liquids |
EN ISO 4628-4:2016
|
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2016) |
VDI 2083 Blatt 8.1:2014-10
|
Cleanroom technology - Air cleanliness chemical concentration (ACC) |
EN ISO 7784-1:2016
|
Paints and varnishes - Determination of resistance to abrasion - Part 1: Method with abrasive-paper covered wheels and rotating test specimen (ISO 7784-1:2016) |
ISO 20566:2013
|
Paints and varnishes Determination of the scratch resistance of a coating system using a laboratory-scale car-wash |
ISO 4628-3:2016
|
Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 3: Assessment of degree of rusting |
PREN ISO 14644-1 : DRAFT 2010
|
CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 1: CLASSIFICATION OF AIR CLEANLINESS BY PARTICLE CONCENTRATION |
EN ISO 14159:2008
|
Safety of machinery - Hygiene requirements for the design of machinery (ISO 14159:2002) |
ISO 14698-1:2003
|
Cleanrooms and associated controlled environments Biocontamination control Part 1: General principles and methods |
DIN EN 61340-4-5 : 2005
|
ELECTROSTATICS - PART 4-5: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - METHODS FOR CHARACTERIZING THE ELECTROSTATIC PROTECTION OF FOOTWEAR AND FLOORING IN COMBINATION WITH A PERSON |
EN 13523-16:2004
|
Coil coated metals - Test methods - Part 16: Resistance to abrasion |
EN ISO 4628-3:2016
|
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2016) |
ASTM D 1044 : 2013 : REDLINE
|
Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion |
VDI 1000:2017-02
|
VDI Standardisation Work - Principles and procedures |
EN 13098:2000
|
Workplace atmosphere - Guidelines for measurement of airborne micro-organisms and endotoxin |
ISO 14159:2002
|
Safety of machinery — Hygiene requirements for the design of machinery |
DIN EN 13795:2013-10
|
SURGICAL DRAPES, GOWNS AND CLEAN AIR SUITS, USED AS MEDICAL DEVICES FOR PATIENTS, CLINICAL STAFF AND EQUIPMENT - GENERAL REQUIREMENTS FOR MANUFACTURERS, PROCESSORS AND PRODUCTS, TEST METHODS, PERFORMANCE REQUIREMENTS AND PERFORMANCE LEVELS |
EN 1672-2:2005+A1:2009
|
Food processing machinery - Basic concepts - Part 2: Hygiene requirements |
ISO 2812-4:2017
|
Paints and varnishes — Determination of resistance to liquids — Part 4: Spotting methods |
VDI 2083 Blatt 16.1:2010-08
|
Cleanroom technology - Barier systems (isolators, mini-environments, separative devices) - Effectiveness and certification |
DIN EN ISO 11998:2006-10
|
Paints and varnishes - Determination of wet-scrub resistance and cleanability of coatings (ISO 11998:2006) |
ISO 4628-5:2016
|
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking |
EN 14065:2016
|
Textiles - Laundry processed textiles - Biocontamination control system |
IEC 61340-4-1:2003+AMD1:2015 CSV
|
Electrostatics - Part 4-1: Standard test methods for specific applications - Electrical resistance of floor coverings and installed floors |
ISO 4628-1:2016
|
Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 1: General introduction and designation system |
DIN 8592:2003-09
|
MANUFACTURING PROCESSES CLEANING - CLASSIFICATION, SUBDIVISION, TERMS AND DEFINITIONS |
EN ISO 14698-2:2003/AC:2006
|
CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL - PART 2: EVALUATION AND INTERPRETATION OF BIOCONTAMINATION DATA |
DIN EN 14065:2016-08
|
TEXTILES - LAUNDRY PROCESSED TEXTILES - BIOCONTAMINATION CONTROL SYSTEM |
DIN EN 1081:1998-04
|
RESILIENT FLOOR COVERINGS - DETERMINATION OF THE ELECTRICAL RESISTANCE |
EN 15457:2014
|
Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against fungi |
ISO 22196:2011
|
Measurement of antibacterial activity on plastics and other non-porous surfaces |
ISO 22610:2006
|
Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment Test method to determine the resistance to wet bacterial penetration |
DIN EN ISO 14644-9:2012-12
|
Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration (ISO 14644-9:2012) |
EN 13795:2011+A1:2013
|
Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment - General requirements for manufacturers, processors and products, test methods, performance requirements and performance levels |
ISO 14577-1:2015
|
Metallic materials Instrumented indentation test for hardness and materials parameters Part 1: Test method |
VDI 2083 Blatt 5.1:2007-09
|
Cleanroom technology - Cleanroom operation |
ISO 11998:2006
|
Paints and varnishes — Determination of wet-scrub resistance and cleanability of coatings |
EN ISO 846 : 1997
|
PLASTICS - EVALUATION OF THE ACTION OF MICROORGANISMS |
DIN EN 1672-2:2009-07
|
Food processing machinery - Basic concepts - Part 2: Hygiene requirements (includes Amendment A1:2009) |
ISO 2812-1:2017
|
Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water |
EN 10049:2013
|
Measurement of roughness average Ra and peak count RPc on metallic flat products |
DIN EN ISO 14577-1:2015-11
|
Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015); German version EN ISO 14577-1:2015 |
IEC 61340-4-5:2004
|
Electrostatics - Part 4-5: Standard test methods for specific applications - Methods for characterizing the electrostatic protection of footwear and flooring in combination with a person |
DIN EN 13697:2015-06
|
CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE NON-POROUS SURFACE TEST FOR THE EVALUATION OF BACTERICIDAL AND/OR FUNGICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS USED IN FOOD, INDUSTRIAL, DOMESTIC AND INSTITUTIONAL AREAS - TEST METHOD AND REQUIREMENTS WITHOUT MECHANICAL ACTION (PHASE 2, STEP 2) |
ISO 14644-4:2001
|
Cleanrooms and associated controlled environments — Part 4: Design, construction and start-up |
VDE 0300-4-1 : 2016
|
ELECTROSTATICS - PART 4-1: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - ELECTRICAL RESISTANCE OF FLOOR COVERINGS AND INSTALLED FLOORS (IEC 61340-4-1:2003 + A1:2015) |
EN ISO 15883-1:2009/A1:2014
|
WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006/AMD 1:2014) |
VDI 2083 Blatt 17:2013-06
|
Cleanroom technology - Compatibility of materials with the required cleanliness |
DIN EN ISO 4628-3:2016-07
|
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2016); German version EN ISO 4628-3:2016 |
DIN EN ISO 14159:2008-07
|
SAFETY OF MACHINERY - HYGIENE REQUIREMENTS FOR THE DESIGN OF MACHINERY |
DIN EN 10049:2014-03
|
Measurement of roughness average Ra and peak count RPc on metallic flat products |
DIN EN ISO 2812-4:2007-05
|
PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 4: SPOTTING METHODS (ISO 2812-4:2017) |
EN ISO 4628-5:2016
|
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2016) |
DIN EN ISO 15883-1:2014-10
|
WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006 + AMD 1:2014) |
EN 14583:2004
|
Workplace atmospheres - Volumetric bioaerosol sampling devices - Requirements and test methods |
VDI 2083 Blatt 9.1:2006-12
|
Clean room technology - Compatibility with required cleanliness and surface cleanliness |
EN 1040:2005
|
Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of basic bactericidal activity of chemical disinfectants and antiseptics - Test method and requirements (phase 1) |
ISO 7784-1:2016
|
Paints and varnishes — Determination of resistance to abrasion — Part 1: Method with abrasive-paper covered wheels and rotating test specimen |
EN 1081:1998
|
Resilient floor coverings - Determination of the electrical resistance |
VDI 4257 Blatt 2:2011-09
|
Bioaerosols and biological agents - Emission measurement - Sampling of bioaerosols and separation in liquids |
EN 1650:2008+A1:2013
|
CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE SUSPENSION TEST FOR THE EVALUATION OF FUNGICIDAL OR YEASTICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS AND ANTISEPTICS USED IN FOOD, INDUSTRIAL, DOMESTIC AND INSTITUTIONAL AREAS - TEST METHOD AND REQUIREMENTS (PHASE 2, STEP 1) |
DIN EN 15457:2014-11
|
Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against fungi |
VDI 2083 Blatt 5.2:2008-10
|
Cleanroom technology - Cleanroom operation - Decontamination of multiple-use cleanroom clothing |
DIN EN ISO 4628-5:2016-07
|
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2016) |
DIN 10113-3:1997-07
|
Determination of surface colony count on fitment and utensils in foodareas - Part 3: Semiquantitative method with culture media laminated taking up equipment (squeeze method) |
BS 3900-G6:1989
|
Methods of test for paints Assessment of resistance to fungal growth |
EN 1276:2009/AC:2010
|
CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE SUSPENSION TEST FOR THE EVALUATION OF BACTERICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS AND ANTISEPTICS USED IN FOOD, INDUSTRIAL, DOMESTIC AND INSTITUTIONAL AREAS - TEST METHOD AND REQUIREMENTS (PHASE 2, STEP 1) |
DIN EN 61340-4-1 : 2016
|
ELECTROSTATICS - PART 4-1: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - ELECTRICAL RESISTANCE OF FLOOR COVERINGS AND INSTALLED FLOORS (IEC 61340-4-1:2003 + A1:2015) |
ISO 4628-2:2016
|
Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering |
EN ISO 22612:2005
|
Clothing for protection against infectious agents - Test method for resistance to dry microbial penetration (ISO 22612:2005) |
DIN EN ISO 7784-1:2006-07
|
PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO ABRASION - PART 1: METHOD WITH ABRASIVE-PAPER COVERED WHEELS AND ROTATING TEST SPECIMEN (ISO 7784-1:2016) |