ANSI C57.12.27 : 1982
|
LIQUID-FILLED DISTRIBUTION TRANSFORMERS USED IN PAD-MOUNTED INSTALLATIONS INCLUDING UNIT SUBSTATIONS CONFORMANCE STANDARD FOR, |
IEEE C37.91-2008 REDLINE
|
IEEE Guide for Protecting Power Transformers |
IEEE C57.96-1999
|
IEEE Guide for Loading Dry-Type Distribution and Power Transformers |
IEEE C57.12.51-2008
|
REQUIREMENTS FOR SEALED DRY-TYPE POWER TRANSFORMERS, 501 KVA AND LARGER, THREE-PHASE, WITH HIGH-VOLTAGE 601 TO 34500 VOLTS, LOW-VOLTAGE 208Y/120 TO 4160 VOLTS |
IEEE C57.12.52-2012
|
IEEE Standard for Sealed Dry-Type Power Transformers, 501 kVA and Higher, Three-Phase, with High-Voltage 601 to 34500 Volts, Low-Voltage 208Y/120 to 4160 Volts—General Requirements |
IEEE C57.12.10-2010
|
TRANSFORMERS - 230 KV AND BELOW 833/958 THROUGH 8333/10 417 KVA, SINGLE-PHASE, AND 750/862 THROUGH 60 000/80 000/100 000 KVA, THREE-PHASE WITHOUT LOAD TAP CHANGING; AND 3750/4687 THROUGH 60 000/80 000/100 000 KVA WITH LOAD TAP CHANGING - SAFETY REQUIREMENT |
IEEE C37.90-2005
|
IEEE Standard for Relays and Relay Systems Associated with Electric Power Apparatus |
IEEE C37.20.1-2015 REDLINE
|
IEEE Standard for Metal-Enclosed Low-Voltage (1000 Vac and below, 3200 Vdc and below) Power Circuit Breaker Switchgear |
IEEE 241 : 1990
|
ELECTRIC POWER SYSTEMS IN COMMERCIAL BUILDINGS |
IEEE C57.12.01-2015 REDLINE
|
IEEE Standard for General Requirements for Dry-Type Distribution and Power Transformers |
ANSI C57.12.40 : 2011
|
AMERICAN NATIONAL STANDARD FOR SECONDARY NETWORK TRANSFORMERS - SUBWAY AND VAULT TYPES (LIQUID IMMERSED) - REQUIREMENTS |
IEEE C37.20.1-2002
|
IEEE Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear |
ANSI C57.12.24 : 2009
|
TRANSFORMERS - UNDERGROUND-TYPE THREE-PHASE DISTRIBUTION TRANSFORMERS, 2500 KVA AND SMALLER; HIGH VOLTAGE, 34 500 GRDY/19 920 VOLTS AND BELOW; LOW VOLTAGE, 480 VOLTS AND BELOW - REQUIREMENTS |
NEMA SG 2 : 1993
|
HIGH VOLTAGE FUSES |
IEEE C37.20.2-2015
|
IEEE Standard for Metal-Clad Switchgear |
NFPA 70B : 2016
|
RECOMMENDED PRACTICE FOR ELECTRICAL EQUIPMENT MAINTENANCE |
IEEE C57.12.00-2015
|
IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers |
IEEE C57.91-2011 REDLINE
|
IEEE Guide for Loading Mineral-Oil-Immersed Transformers and Step-Voltage Regulators |
IEEE C57.96-2013
|
IEEE Guide for Loading Dry-Type Distribution and Power Transformers |
IEEE C57.12.00-2010 REDLINE
|
IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers |
IEEE C57.12.01-2005
|
IEEE Standard General Requirements for Dry-Type Distribution and Power Transformers Including Those with Solid Cast and/or Resin Encapsulated Windings |
IEEE 4-2013
|
IEEE Standard for High-Voltage Testing Techniques |
ANSI C37.55 : 1989
|
MEDIUM VOLTAGE METAL-CLAD ASSEMBLIES - CONFORMANCE TEST PROCEDURES |
IEEE C37.20.3-2013 REDLINE
|
IEEE Standard for Metal-Enclosed Interrupter Switchgear (1 kV-38 kV) |
IEEE C57.104-2008
|
IEEE Guide for the Interpretation of Gases Generated in Oil-Immersed Transformers |
IEEE C37.010-1999
|
IEEE Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis |
ANSI C57.12.52 : 2012
|
Sealed Dry-Type Power Transformers, 501 kVA and Higher, Three-Phase, with High-Voltage 601 to 34500 Volts, Low-Voltage 208Y/120 to 4160 Volts—General Requirements |
ANSI C57.12.13 : 1982
|
LIQUID-FILLED TRANSFORMERS USED IN UNIT INSTALLATIONS INCLUDING UNIT SUBSTATIONS, CONFORMANCE STANDARD FOR |
ANSI C84.1 : 2016
|
ELECTRIC POWER SYSTEMS AND EQUIPMENT - VOLTAGE RATINGS (60 HERTZ) |
IEEE C37.40-2003
|
IEEE Standard Service Conditions and Definitions for High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories |
IEEE C57.92-1981
|
IEEE Guide for Loading Mineral-Oil-Immersed Power Transformers Up to and Including 100 MVA with 55 C or 65 C Average Winding Rise |
IEEE 142 : 2007
|
GROUNDING OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS |
IEEE C57.12.51-2008
|
IEEE Standard for Ventilated Dry- Type Power Transformers, 501 kVA and Larger, Three-Phase, with High- Voltage 601 V to 34 500 V; Low- Voltage 208Y/120 V to 4160 V- General Requirements |
NFPA 70 : 2017
|
NATIONAL ELECTRICAL CODE |
IEEE C37.20.2-1999
|
IEEE Standard for Metal-Clad Switchgear |
IEEE C37.24-2003
|
IEEE Guide for Evaluating the Effect of Solar Radiation on Outdoor Metal-Enclosed Switchgear |
NEMA SG 5-1995
|
POWER SWITCHGEAR ASSEMBLIES |
IEEE C57.12.70-2011
|
IEEE Standard for Standard Terminal Markings and Connections for Distribution and Power Transformers |
IEEE C37.20.3-2001
|
IEEE Standard for Metal-Enclosed Interrupter Switchgear |
NEMA ICS 2:2008
|
Controllers, Contactors and Overload Relays Rated 600 V |
IEEE C57.94-1982
|
IEEE Recommended Practice for Installation, Application, Operation, and Maintenance of Dry-Type General Purpose Distribution and Power Transformers |
IEEE C37.23-2003
|
IEEE Standard for Metal-Enclosed Bus |
IEEE C57.12.50 : 1981
|
REQUIREMENTS FOR VENTILATED DRY-TYPE DISTRIBUTION TRANSFORMERS, 1 TO 500 KVA, SINGLE-PHASE, AND 15 TO 500 KVA, THREE-PHASE, WITH HIGH-VOLTAGE 601 TO 34500 VOLTS, LOW-VOLTAGE 120 TO 600 VOLTS |
IEEE C57.12.10-2010 REDLINE
|
IEEE Standard Requirements for Liquid-Immersed Power Transformers |
IEEE C62.22-2009 REDLINE
|
IEEE Guide for the Application of Metal-Oxide Surge Arresters for Alternating-Current Systems |
IEEE 141 : 1993
|
IEEE Recommended Practice for Electric Power Distribution for Industrial Plants |
IEEE C57.106-2006
|
IEEE Guide for Acceptance and Maintenance of Insulating Oil in Equipment |
ANSI C57.12.57 : 1987
|
AMERICAN NATIONAL STANDARD FOR TRANSFORMERS - VENTILATED DRY-TYPE NETWORK TRANSFORMERS 2500 KVA AND BELOW, THREE-PHASE, WITH HIGH-VOLTAGE 34500 VOLTS AND BELOW, LOW-VOLTAGE 216Y/125 AND 480Y/227 VOLTS - REQUIREMENTS |