IEEE C57.21 : 2008
|
REQUIREMENTS, TERMINOLOGY, AND TEST CODE FOR SHUNT REACTORS RATED OVER 500 KVA |
IEEE 299-2006
|
IEEE Standard Method for Measuring the Effectiveness of Electromagnetic Shielding Enclosures |
IEEE 139-1988
|
IEEE Recommended Practice for the Measurement of Radio Frequency Emission from Industrial, Scientific, and Medical (ISM) Equipment Installed on User\'s Premises |
AECTP-500 : 2016
|
ELECTROMAGNETIC ENVIRONMENTAL EFFECTS TESTS AND VERIFICATION |
EN 61967-1:2002
|
Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 1: General conditions and definitions |
IEEE/ANSI C63.4-2014
|
American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz |
MIL-STD-461 Revision G:2015
|
REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT |
AAEP-03 : 2016
|
BIBLIOGRAPHY ON ELECTROMAGNETIC COMPATIBILITY (EMC) |
IEEE 1031-2011
|
IEEE Guide for the Functional Specification of Transmission Static Var Compensators |
CEI EN 61967-1 : 2002
|
INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC EMISSIONS, 150 KHZ TO 1 GHZ - PART 1: GENERAL CONDITIONS AND DEFINITIONS |
IEEE C37.100.1-2007
|
IEEE Standard of Common Requirements for High Voltage Power Switchgear Rated Above 1000 V |
SAE J 551/1 : 2015
|
PERFORMANCE LEVELS AND METHODS OF MEASUREMENT OF ELECTROMAGNETIC COMPATIBILITY OF VEHICLES, BOATS (UP TO 15 M), AND MACHINES (16.6 HZ TO 18 GHZ) |
IEEE C37.45-2007
|
IEEE Standard Specifications for High Voltage Distribution Class Enclosed Single-Pole Air Switches with Rated Voltages from 1 through 8.3 kV |
NEMA EW 1-1988 (R1994, R1999, R2004)
|
Electric Arc-Welding Power Sources |
NEMA EW 3:1983(R2002)
|
Semi-Automatic Wire-Feed Systems for Arc Welding |
NEMA WD 1:1999(R2005, R2010, R2015, R2020)
|
General Color Requirements for Wiring Devices |
NEMA 107:2016
|
Methods of Measurement of Radio Influence Voltage (RIV) of High Voltage Apparatus |
NEMA CC1 : 2009(R2015)
|
ELECTRIC POWER CONNECTORS FOR SUBSTATIONS |
IEEE C57.19.00 : 2004
|
GENERAL REQUIREMENTS AND TEST PROCEDURE FOR POWER APPARATUS BUSHINGS |
IEEE 299.1-2013
|
IEEE Standard Method for Measuring the Shielding Effectiveness of Enclosures and Boxes Having all Dimensions between 0.1 m and 2 m |
IEEE DRAFT C63.5 : D7A DEC 97
|
ELECTROMAGNETIC COMPATIBILITY-RATED EMISSION MEASUREMENTS IN ELECTROMAGNETIC INTERFERENCE (EMI) CONTROL-CALIBRATION OF ANTENNAS (9 KHZ TO 40 GHZ) |
IEEE/ANSI C63.22-2004
|
American National Standard Guide for Automated Electromagnetic Interference Measurements |
IEEE C37.34-1994
|
IEEE Standard Test Code for High-Voltage Air Switches |
IEEE C37.66 : 2005
|
REQUIREMENTS FOR CAPACITOR SWITCHES FOR AC SYSTEMS (1 KV TO 38 KV) |
EIA IS 648 : 1996
|
MEASUREMENT OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF EQUIPMENT INTENDED TO OPERATE IN SEVERE ELECTROMAGNETIC ENVIRONMENTS |
IEEE/ANSI C63.15-2010
|
American National Standard Recommended Practice for the Immunity Measurement of Electrical and Electronic Equipment |
IEEE C37.38-1989
|
IEEE Standard for Gas Insulated, Metal-Enclosed Disconnecting, Interrupter, and Grounding Switches |
08/30184557 DC : DRAFT JUNE 2008
|
BS EN 62271-111 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 111: PAD-MOUNTED, DRY VAULT, AND SUBMERSIBLE AUTOMATIC CIRCUIT RECLOSERS AND FAULT INTERRUPTERS FOR ALTERNATING CURRENT SYSTEMS UP TO 38 KV |
MIL-STD-462 Revision D:1993
|
MEASUREMENT OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS |
IEEE 284-1968
|
IEEE Standards Report on State-of-the-Art of Measuring Field Strength, Continuous Wave, Sinusoidal |
IEEE 475-2000
|
IEEE Standard Measurement Procedure for Field Disturbance Sensors 300 MHz to 40 GHz |
IEEE 539-2005
|
IEEE Standard Definitions of Terms Relating to Corona and Field Effects of Overhead Power Lines |
IEEE C57.124 : 1991
|
RECOMMENDED PRACTICE FOR THE DETECTION OF PARTIAL DISCHARGE AND THE MEASUREMENT OF APPARENT CHARGE IN DRY-TYPE TRANSFORMERS |
I.S. EN 61967-1:2002
|
INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC EMISSIONS, 150 KHZ TO 1 GHZ - PART 1: GENERAL CONDITIONS AND DEFINITIONS |
IEEE 1829-2017
|
IEEE Guide for Conducting Corona Tests on Hardware for Overhead Transmission Lines and Substations |
IEC 61967-1:2002
|
Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 1: General conditions and definitions |
IEEE DRAFT C63.19 : 2005
|
METHODS OF MEASUREMENT OF COMPATIBILITY BETWEEN WIRELESS COMMUNICATIONS DEVICES AND HEARING AIDS |
IEEE DRAFT C57.12.90 : D5.1 98
|
DRAFT STANDARD TEST CODE FOR LIQUID-IMMERSED DISTRIBUTION, POWER, AND REGULATING TRANSFORMERS |
PD CISPR/TR 18-2:2017
|
Radio interference characteristics of overhead power lines and high-voltage equipment - Part 2: Methods of measurement and procedure for determining limits |
SAE J 1113/1 : 2013
|
ELECTROMAGNETIC COMPATIBILITY MEASUREMENT PROCEDURES AND LIMITS FOR COMPONENTS OF VEHICLES, BOATS (UP TO 15 M), AND MACHINES (EXCEPT AIRCRAFT) (16.6 HZ TO 18 GHZ) |
IEEE C37.122.1-2014 REDLINE
|
IEEE Guide for Gas-Insulated Substations Rated Above 52 kV |
BS EN 61967-1:2002
|
Integrated circuits. Measurement of electromagnetic emissions, 150 kHz to 1 GHz General conditions and definitions |
IEEE 1128-1998
|
IEEE Recommended Practice for Radio-Frequency (RF) Absorber Evaluation in the Range of 30 MHz to 5 GHz |
IEEE C95.3-2002
|
IEEE Recommended Practice for Measurements and Computations of Radio Frequency Electromagnetic Fields With Respect to Human Exposure to Such Fields, 100 kHz-300 GHz |
IEEE/ANSI C63.12-2015 REDLINE
|
American National Standard Recommended Practice for Electromagnetic Compatibility Limits and Test Levels |
IEEE 1247 : 2005
|
INTERRUPTER SWITCHES FOR ALTERNATING CURRENT, RATED ABOVE 1000 V |
IEEE/ANSI C63.23-2012
|
American National Standard Guide for Electromagnetic Compatibility—Computations and Treatment of Measurement Uncertainty |
IEEE 377 : 1980
|
MEASUREMENT OF SPURIOUS EMISSION FROM LAND-MOBILE COMMUNICATION TRANSMITTERS, RECOMMENDED PRACTICE FOR |
IEEE/ANSI C63.14-2014 REDLINE
|
American National Standard Dictionary of Electromagnetic Compatibility (EMC) including Electromagnetic Environmental Effects (E3) |
IEEE 1560-2005
|
IEEE Standard for Methods of Measurement of Radio Frequency Power Line Interference Filter in the Range of 100 Hz to 10 GHz |
IEEE/ANSI C63.6-1996
|
American National Standard Guide for the Computation of Errors in Open-Area Test Site Measurements |
IEEE/ANSI C63.26-2015
|
IEEE/ANSI Standard for Compliance Testing of Transmitters Used in Licensed Radio Services |
CISPR TR 18-2:2017
|
Radio interference characteristics of overhead power lines and high-voltage equipment - Part 2: Methods of measurement and procedure for determining limits |
IEEE C57.12.90-2010
|
IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers |
IEEE DRAFT 299 : 0
|
METHOD FOR MEASURING THE EFFECTIVENESS OF ELECTROMAGNETIC SHIELDING ENCLOSURES |
IEEE C37.41-2008 REDLINE
|
IEEE Standard Design Tests for High-Voltage (>1000 V) Fuses, Fuse and Disconnecting Cutouts, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Fuse Links and Accessories Used with These Devices |
IEEE C57.12.90-2015 REDLINE
|
IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers |
IEEE C37.45-2016
|
IEEE Standard for Design Test Specifications for High Voltage (> 1000 V) Distribution Class Enclosed Single-Pole Air Switches |
IEEE C37.30.1-2011
|
IEEE Standard Requirements for AC High-Voltage Air Switches Rated Above 1000 V |