BS 4842:1984

Current

Current The latest, up-to-date edition.

Specification for liquid organic coatings for application to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated with liquid organic coatings

Available format(s): Hardcopy, PDF

Language(s): English

Published date: 31-08-1984

Publisher: British Standards Institution

Table of Contents - (Show below) - (Hide below)

Committees responsible
Foreword
Section 1 - General
1 Scope
2 Definitions
Section 2 - Performance and other requirements
            for liquid organic coatings
3 Sampling of liquid organic coatings
4 Performance requirements for liquid organic
   coatings
5 Manufacturer's certificate
6 Identification of liquid organic coatings
Section 3 - Performance and other requirements
            for the finish on aluminium alloy extrusions,
            sheet and preformed sections coated with
            liquid organic coatings
7 Coating
8 Pre-treatment of aluminium alloy extrusions, sheet
   or preformed sections
9 Sampling of coated panels, extrusions, sheet and
   preformed sections
10 Performance requirements for the finish on coated
   aluminium extrusions, sheet and preformed sections
11 Applicator's certificate
12 Identification, care and maintenance
Section 4 - Methods of test for liquid organic coatings
            applied to and finishes on aluminium alloy
            test panels, extrusions, sheet or preformed
            sections
13 Preparation of coated test panels
14 Resistance to mortar
15 Solvent test
16 Resistance to acetic acid/salt spray
17 Permeability of coating and quality of pre-treatment
   of the metal surface
Appendix A - The care of the finish on coated aluminium
             alloy components for architectural purposes
Appendix B - The maintenance of the finish on coated
             aluminium alloy components installed externally
Publications referred to

Abstract - (Show below) - (Hide below)

Requirements for coatings before and after their application. Also specifies the pre-treatment of the aluminium alloy. (See also BS 6496).

Scope - (Show below) - (Hide below)

Section 2 of BS 4842 specifies requirements for liquid organic coatings which are intended for application to aluminium alloy extrusions, sheet and preformed sections that are not to be further formed (except for cutting).

Section 3 of BS 4842 specifies requirements for the finish on aluminium alloy extrusions, sheet and preformed sections when so coated.

The methods of test for these coatings and finishes are described in section 4.

NOTE The titles of the publications referred to in this standard are listed on the inside back cover.

General Product Information - (Show below) - (Hide below)

Committee	STI/21
Development Note	Supersedes BS 4842(1972), 82/52956 DC & 91/56742. (07/2005) Reviewed and confirmed by BSI, October 2008. (09/2008)
Document Type	Standard
ISBN
Pages
Published
Publisher	British Standards Institution
Status	Current
Supersedes	BS 4842:1972

Standards Referenced By This Book - (Show below) - (Hide below)

12/30263952 DC : 0	BS EN 61048:2006+A1 - AUXILIARIES FOR LAMPS - CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS - GENERAL AND SAFETY REQUIREMENTS
BS 8118-2(1991) : 1991	STRUCTURAL USE OF ALUMINIUM - PART 2: SPECIFICATION FOR MATERIALS, WORKMANSHIP AND PROTECTION
BS 5516-1:2004	Patent glazing and sloping glazing for buildings Code of practice for design and installation of sloping and vertical patent glazing
08/30143158 DC : DRAFT AUG 2008	BS 644 - TIMBER WINDOWS - FULLY FINISHED FACTORY ASSEMBLED WINDOWS OF VARIOUS TYPES - SPECIFICATION
BS 6150:1991	Code of practice for painting of buildings
BS 4873:2004	Aluminium alloy windows
BS 4873:2016	Aluminium alloy windows and doorsets. Specification
09/30196573 DC : 0	BS 8530 - TRADITIONAL-STYLE HALF ROUND, BEADED HALF ROUND, VICTORIAN OGEE AND MOULDED OGEE ALUMINIUM RAINWATER SYSTEMS - SPECIFICATION
ISO/TS 16688:2017	Guidelines for the selection of coating types, tests and methods of assessing the performance of coated aluminium in architectural applications
BS 6180:2011	Barriers in and about buildings. Code of practice
BS 644:2012	Timber windows and doorsets. Fully finished factory-assembled windows and doorsets of various types. Specification
BS 644:2009	Timber windows. Fully finished factory-assembled windows of various types. Specification
I.S. 197-2:1985	ALUMINIUM ALLOY WINDOWS
05/30095368 DC : DRAFT FEB 2005	BS 6150 - PAINTING OF BUILDINGS - CODE OF PRACTICE
PD ISO/TS 16688:2017	Guidelines for the selection of coating types, tests and methods of assessing the performance of coated aluminium in architectural applications
BS 6496:1984	Specification for powder organic coatings for application and stoving to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated with powder organic coatings
12/30218393 DC : 0	BS 644 - TIMBER WINDOWS AND DOORSETS - FULLY FINISHED FACTORY-ASSEMBLED WINDOWS AND DOORSETS OF VARIOUS TYPES - SPECIFICATION
08/30143160 DC : DRAFT AUG 2008	BS 4873 - ALUMINIUM ALLOY WINDOWS AND DOOR SETS - SPECIFICATION
10/30212801 DC : 0	BS 6180 - BARRIERS IN AND ABOUT BUILDINGS - CODE OF PRACTICE
15/30318434 DC : 0	BS 4873 - ALUMINIUM ALLOY WINDOWS AND DOORSETS - SPECIFICATION
BS 8530:2010	Traditional-style half round, beaded half round, Victorian ogee and moulded ogee aluminium rainwater systems. Specification
BS 6150(2006) : 2006	PAINTING OF BUILDINGS - CODE OF PRACTICE
BS 4873:2009	Aluminium alloy windows and doorsets. Specification

Standards Referencing This Book - (Show below) - (Hide below)

BS 5411-14(1982) : 1982 AMD 8497	METHODS OF TEST FOR METALLIC AND RELATED COATINGS - GRAVIMETRIC METHOD FOR DETERMINATION OF COATING MASS PER UNIT AREA CONVERSION COATINGS ON METALLIC MATERIALS
BS 5701:1980	Guide to number-defective charts for quality control
BS 1199 & 1200(1976) : 1976 AMD 5126	SPECIFICATIONS FOR BUILDING SANDS FROM NATURAL SOURCES
BS 6496:1984	Specification for powder organic coatings for application and stoving to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated with powder organic coatings
BS 3900-F3:1971	Methods of test for paint. Durability tests on paint films Resistance to artificial weathering (enclosed carbon arc)
BS 5700:1984	Guide to process control using quality control chart methods and cusum techniques
BS 3900-F2:1973	Methods of test for paint. Durability tests on paint films Determination of resistance to humidity (cyclic condensation)
BS 5703-2:1980	Guide to data analysis and quality control using cusum techniques Decision rules and statistical tests for cusum charts and tabulations
BS 6002:1979	Specification for sampling procedures and charts for inspection by variables for percent defective
BS 5703-1:1980	Guide to data analysis and quality control using cusum techniques Introduction to cusum charting
BS 6001(1972) : AMD 5054	SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - SPECIFICATION FOR SAMPLING PLANS INDEXED BY ACCEPTABLE QUALITY LEVEL (AQL) FOR LOT - BY - LOT INSPECTION
ASTM D 659 : 1986 : EDT 1	Method of Evaluating Degree of Chalking of Exterior Paints
BS 1470:1987	Specification for wrought aluminium and aluminium alloys for general engineering purposes: plate, sheet and strip
BS 3900-D5(1997) : 1997 AMD 10590	METHODS OF TEST FOR PAINTS - MEASUREMENT OF SPECULAR GLOSS OF NON-METALLIC PAINT FILMS AT 20 DEGREES, 60 DEGREES AND 85 DEGREES

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Add To Cart

Product Format

Quantity

Buy now

Add to cart

Create account