BS 5555:1993
|
Specification for SI units and recommendations for the use of their multiples and of certain other units |
BS 2011-2.1Fda:1973
|
Environmental testing. Tests Test Fda. Random vibration - wide band reproducibility high |
BS 5420:1977
|
Specification for degrees of protection of enclosures of switchgear and controlgear for voltages up to and including 1000 V a.c. and 1200 V d.c. |
CECC 00109 : 1974
|
CECC RULES OF PROCEDURE: RP 9: CERTIFIED TESTS RECORDS |
BS 2011-2.2Kd:1984
|
Environmental testing. Guidance Test Kd. Guidance on Test Kd: Hydrogen sulphide test for contacts and connections |
BS 2011-2.1Ka:1977
|
Basic enviromental testing proceedures Tests. Test Ka: Salt mist |
BS 5992-4:1983
|
Electrical relays Specification for contact loads of preferred values used in endurance tests for electrical relay contacts |
BS 2011-2.1M:1984
|
Environmental testing. Tests Test M. Low air pressure |
IEC 60068-1:2013
|
Environmental testing - Part 1: General and guidance |
IEC 60695-2-1:1991
|
Fire hazard testing - Part 2: Test methods - Section 1: Glow-wire test and guidance |
BS 5992-3:1980
|
Electrical relays Specification for the insulation testing of electrical relays |
IEC 60068-2-27:2008
|
Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
BS 2011-2.1Fd:1973
|
Environmental testing. Tests Test Fd. Random vibration - wide band, general requirements |
IEC 60068-2-20:2008
|
Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads |
BS CECC 00109:1991
|
Rule of Procedure 9. Certified test records |
IEC 60068-2-49:1983
|
Basic environmental testing procedures - Part 2-49: Tests - Guidance to test Kc: Sulphur dioxide test for contacts and connections |
IEC 60068-2-21:2006
|
Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices |
IEC 60068-2-13:1983
|
Basic environmental testing procedures - Part 2-13: Tests - Test M: Low air pressure |
CECC 00100 : 1988
|
BASIC RULES - TO BE USED IN CONNECTION WITH THE INTERNAL REGULATIONS OF THE FEN e.V |
IEC 60068-2-11:1981
|
Basic environmental testing procedures - Part 2-11: Tests - Test Ka: Salt mist |
BS 6001-1(1999) : 1999
|
SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 1: SAMPLING SCHEMES INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION |
ISO 60:1977
|
Plastics — Determination of apparent density of material that can be poured from a specified funnel |
BS 2011-2.1XA(1981) : 1981 AMD 7553
|
ENVIRONMENTAL TESTING - TESTS - TEST XA AND GUIDANCE - IMMERSION IN CLEANING SOLVENTS |
IEC 60027-1:1992
|
Letters symbols to be used in electrical technology - Part 1: General |
BS 2011-2.1N:1985
|
Environmental testing. Tests Test N. Change of temperature |
BS 2045:1965
|
Preferred numbers |
BS 6458-2.1:1984
|
Fire hazard testing for electrotechnical products. Test methods Glow-wire test |
BS 6493-3:1985
|
Semiconductor devices Mechanical and climatic test methods |
IEC 60255-0-20:1974
|
Electrical relays - Contact performance of electrical relays |
IEC 60255-15:1981
|
Electrical relays. Part 15: Endurance tests for electrical relay contacts - Specification for the characteristics of test equipment |
BS 5992-5:1983
|
Electrical relays Specification for test equipment used in endurance tests for electrical relay contacts |
IEC 60410:1973
|
Sampling plans and procedures for inspection by attributes |
IEC 60068-2-47:2005
|
Environmental testing - Part 2-47: Test - Mounting of specimens for vibration, impact and similar dynamic tests |
BS 5148:1975
|
Method for specifying the performance of stabilized power supply apparatus |
IEC 60068-2-3:1969
|
Basic environmental testing procedures - Part 2-3: Tests - Test Ca: Damp heat, steady state |
ISO/R 27:1956
|
Withdrawal of ISO/R 27-1956 |
IEC 60068-2-17:1994
|
Basic environmental testing procedures - Part 2-17: Tests - Test Q: Sealing |
IEC 60068-2-10:2005
|
Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth |
IEC 60068-2-2:2007
|
Environmental testing - Part 2-2: Tests - Test B: Dry heat |
IEC 60255-14:1981
|
Electrical relays. Part 14: Endurance tests for electrical relay contacts - Preferred values for contact loads |
BS 5992-1:1980
|
Electrical relays Specification for contact performance of electrical relays |
IEC 60255-5:2000
|
Electrical Relays - Part 5: Insulation coordination for measuring relays and protection equipment - Requirements and tests |
IEC 60068-2-29:1987
|
Environmental testing. Part 2: Tests. Test Eb and guidance: Bump |
IEC 60443:1974
|
Stabilized supply apparatus for measurement |
MIL-STD-202 Revision H:2015
|
ELECTRONIC AND ELECTRICAL COMPONENT PARTS |
IEC 60068-2-1:2007
|
Environmental testing - Part 2-1: Tests - Test A: Cold |
IEC 60144:1963
|
Degrees of protection of enclosures for low-voltage switchgear and controlgear |
IEC 60068-2-14:2009
|
Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
CECC 00007 : 1978
|
BASIC SPECIFICATION: SAMPLING PLANS AND PROCEDURES FOR INSPECTION BY ATTRIBUTES |
BS 2011-2.1GA(1977) : LATEST
|
BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - ACCELERATION, STEADY STATE |
BS 2011-2.1Fdc:1973
|
Environmental testing. Tests Test Fdc. Random vibration - wide band reproducibility low |
BS 2011-2.1Fdb:1973
|
Environmental testing. Tests Test Fdb. Random vibration - wide band reproducibility medium |
BS 2011-4.1:1983
|
Basic enviromental testing proceedures Specification for mounting of components, equipment and other articles for dynamic tests. |
IEC 60068-2-46:1982
|
Basic environmental testing procedures - Part 2-46: Tests - Guidance to test Kd: Hydrogen sulphide test for contacts and connections |
BS 2011-2.1T:1981
|
Environmental testing. Tests Test T. Soldering |
IEC 60068-2-30:2005
|
Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |