EN 1277:2003
|
Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints |
EN 295-3:2012
|
Vitrified clay pipe systems for drains and sewers - Part 3: Test methods |
ISO 580:2005
|
Plastics piping and ducting systems — Injection-moulded thermoplastics fittings — Methods for visually assessing the effects of heating |
EN ISO 3126:2005
|
Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005) |
ISO/TR 10358:1993
|
Plastics pipes and fittings Combined chemical-resistance classification table |
ENV 1401-3:2001
|
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Guidance for installation |
EN 681-1:1996/A3:2005
|
ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER |
EN 1411:1996
|
Plastics piping and ducting systems - Thermoplastics pipes - Determination of resistance to external blows by the staircase method |
EN ISO 9967:2016
|
Thermoplastics pipes - Determination of creep ratio (ISO 9967:2016) |
EN ISO 1043-1:2011/A1:2016
|
PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMER AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011/AMD 1:2016) |
ISO 265-1:1988
|
Pipes and fittings of plastics materials Fittings for domestic and industrial waste pipes Basic dimensions: Metric series Part 1: Unplasticized poly(vinyl chloride) (PVC-U) |
EN 1055:1996
|
Plastics piping systems - Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for resistance to elevated temperature cycling |
ISO/TR 7620:2005
|
Rubber materials — Chemical resistance |
EN ISO 1167-1:2006
|
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method (ISO 1167-1:2006) |
CEN/TS 15223:2017
|
Plastics piping systems - Validated design parameters of buried thermoplastics piping systems |
EN 681-2:2000/A2:2005
|
ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 2: THERMOPLASTIC ELASTOMERS |
EN 12061:1999
|
Plastics piping systems - Thermoplastics fittings - Test method for impact resistance |
EN 922:1994
|
Plastics piping and ducting systems - Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) - Specimen preparation for determination of the viscosity number and calculation of the K-value |
ISO 3126:2005
|
Plastics piping systems Plastics components Determination of dimensions |
EN 476:2011
|
General requirements for components used in drains and sewers |
ISO 472:2013
|
Plastics Vocabulary |
EN ISO 9001:2015
|
Quality management systems - Requirements (ISO 9001:2015) |
EN 14758-1:2012
|
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system |
EN 727:1994
|
Plastics piping and ducting systems - Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST) |
ISO 18373-1:2007
|
Rigid PVC pipes Differential scanning calorimetry (DSC) method Part 1: Measurement of the processing temperature |
ISO 1183-1:2012
|
Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method |
EN 12666-1:2005+A1:2011
|
Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system |
EN ISO 9969:2016
|
Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016) |
EN 744:1995
|
Plastics piping and ducting systems - Thermoplastics pipes - Test method for resistance to external blows by the round-the-clock method |
EN 10204:2004
|
Metallic products - Types of inspection documents |
ISO 9001:2015
|
Quality management systems — Requirements |
EN ISO 580:2005
|
Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating (ISO 580:2005) |
EN 580:2003
|
Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for the resistance to dichloromethane at a specified temperature (DCMT) |
ISO 9967:2016
|
Thermoplastics pipes Determination of creep ratio |
EN 1905:1998
|
Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material - Method for assessment of the PVC content based on total chlorine content |
EN 1053:1995
|
Plastics piping systems - Thermoplastics piping systems for non-pressure applications - Test method for watertightness |
EN ISO 2505:2005
|
Thermoplastics pipes - Longitudinal reversion - Test method and parameters (ISO 2505:2005) |
ISO 13967:2009
|
Thermoplastics fittings Determination of ring stiffness |
ISO 1043-1:2011
|
Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
ISO 9969:2016
|
Thermoplastics pipes Determination of ring stiffness |
EN 12256:1998
|
Plastics piping systems - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings |
EN ISO 472:2013
|
Plastics - Vocabulary (ISO 472:2013) |
EN ISO 1183-1:2012
|
Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012) |
ISO 2505:2005
|
Thermoplastics pipes — Longitudinal reversion — Test method and parameters |