• BS EN 60598-1:2015 (published 2016-03)

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

    Luminaires General requirements and tests

    Available format(s):  Hardcopy, PDF

    Superseded date:  14-03-2022

    Language(s):  English

    Published date:  31-03-2016

    Publisher:  British Standards Institution

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    SECTION 0: GENERAL INTRODUCTION
    SECTION 1: DEFINITIONS
    SECTION 2: CLASSIFICATION OF LUMINAIRES
    SECTION 3: MARKING
    SECTION 4: CONSTRUCTION
    SECTION 5: EXTERNAL AND INTERNAL WIRING
    SECTION 7: PROVISION FOR EARTHING
    SECTION 8: PROTECTION AGAINST ELECTRIC SHOCK
    SECTION 9: RESISTANCE TO DUST, SOLID OBJECTS
                AND MOISTURE
    SECTION 10: INSULATION RESISTANCE AND ELECTRIC
                STRENGTH, TOUCH CURRENT AND PROTECTIVE
                CONDUCTOR CURRENT
    SECTION 11: CREEPAGE DISTANCES AND
                CLEARANCES
    SECTION 12: ENDURANCE TEST AND THERMAL TEST
    SECTION 13: RESISTANCE TO HEAT, FIRE AND TRACKING
    SECTION 14: SCREW TERMINALS
    SECTION 15: SCREWLESS TERMINALS AND
                ELECTRICAL CONNECTIONS
    Annex A (normative) - Test to establish whether a
            conductive part may cause an electric shock
    Annex B (normative) - Test lamps
    Annex C (normative) - Abnormal circuit conditions
    Annex D (normative) - Draught-proof enclosure
    Annex E (normative) - Determination of winding temperature
            rises by the increase-in-resistance method
    Annex F (normative) - Test for resistance to stress
            corrosion of copper and copper alloys
    Annex G (normative) - Measurement of touch current and
            protective conductor current
    Annex H (Void)
    Annex I (Void)
    Annex J (informative) - Explanation of IP numbers for
            degrees of protection
    Annex K (informative) - Temperature measurement
    Annex L (informative) - Guide to good practice in luminaire
            design
    Annex M (normative) - Determination of creepage distances
            and clearances
    Annex N (informative) - Explanation of marking for
            luminaires that are not suitable for mounting on
            normally flammable surfaces and covering with
            insulation materials
    Annex O (Void)
    Annex P (normative) - Absorption requirements for the
            protective shield to be fitted to luminaires
            designed for metal halide lamps which emit a high
            level of UV radiation
    Annex Q (informative) - Conformity testing during
            manufacture
    Annex R (normative) - Schedule of amended subclauses
            containing more serious/critical requirements which
            require products to be retested
    Annex S (normative) - Requirements for the identification
            of a family or range of luminaires for type testing
    Annex T (informative) - Reference to Class 0
    Annex U (informative) - Creepage and clearances distances
            for luminaires where a higher degree of availability
            (impulse withstand category III) may be requested
    Annex V (normative) - Additional test requirements for
            terminal blocks with integrated screwless earthing
            contact for direct connection to the luminaire
            housing or to parts of the body
    Annex W (normative) - Alternative thermal test for
            thermoplastic luminaires
    Annex X (normative)
    Bibliography
    Annex ZA (normative) - Normative references to
             international publications with their
             corresponding European
             publications
    Annex ZB (normative) - Special national conditions
    Annex ZC (informative) - A-deviations

    Abstract - (Show below) - (Hide below)

    Describes general requirements for luminaires, incorporating electric light sources for operation from supply voltages up to 1000 V.

    General Product Information - (Show below) - (Hide below)

    Committee CPL/34/4
    Development Note Supersedes 00/240343 DC, 93/205199 DC, 95/205703 DC & 97/200308 DC. (05/2003) Supersedes BS 4533-101(1990). (08/2005) Supersedes 05/30131310 DC, 91/26725 DC and 93/205058 DC. (03/2007) Supersedes 03/111132 DC. (01/2009) Supersedes 08/30194204 DC. (11/2009) 2008 Edition along with it's amendment remains active & will be withdrawn on 20/10/2017. Supersedes 12/30266672 DC. (03/2015)
    Document Type Standard
    Publisher British Standards Institution
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    09/30166898 DC : 0 BS 559 - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF SIGN INSTALLATIONS
    BS PD6686(2006) : 2006 GUIDANCE ON DIRECTIVES, REGULATIONS AND STANDARDS RELATED TO PREVENTION OF FIRE AND EXPLOSION IN THE PROCESS INDUSTRIES
    13/30260337 DC : 0 BS 5499-4 - SAFETY SIGNS - PART 4: CODE OF PRACTICE FOR ESCAPE ROUTE SIGNING
    BS 6396(2008) : 2008 ELECTRICAL SYSTEMS IN OFFICE FURNITURE AND EDUCATIONAL FURNITURE - SPECIFICATION
    BS EN 60926 : 1996 SPECIFICATION FOR AUXILIARIES FOR LAMPS - STARTING DEVICES (OTHER THAN GLOW STARTERS) - GENERAL AND SAFETY REQUIREMENTS
    BS 559(2009) : 2009 SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF SIGNS FOR PUBLICITY, DECORATIVE AND GENERAL PURPOSES
    BS 8541-4(2012) : 2012 LIBRARY OBJECTS FOR ARCHITECTURE, ENGINEERING AND CONSTRUCTION - PART 4: ATTRIBUTES FOR SPECIFICATION AND ASSESSMENT - CODE OF PRACTICE
    BS 5489-1(2013) : 2013 CODE OF PRACTICE FOR THE DESIGN OF ROAD LIGHTING - PART 1: LIGHTING OF ROADS AND PUBLIC AMENITY AREAS
    08/30166535 DC : DRAFT MAR 2008 BS 7909 - CODE OF PRACTICE FOR TEMPORARY ELECTRICAL SYSTEMS FOR ENTERTAINMENT AND RELATED PURPOSES
    BS 7909(2008) : 2008 CODE OF PRACTICE FOR TEMPORARY ELECTRICAL SYSTEMS FOR ENTERTAINMENT AND RELATED PURPOSES
    BS 5266-5(1999) : 1999 EMERGENCY LIGHTING - SPECIFICATION FOR COMPONENT PARTS OF OPTICAL FIBRE SYSTEMS
    ENA ER G81-2 : ISSUE 2 2016 FRAMEWORK FOR NEW LOW VOLTAGE HOUSING DEVELOPMENT INSTALLATIONS - PART 2: MATERIALS SPECIFICATION
    BS EN 60634 : 1995 HEAT TEST SOURCE (H.T.S.) LAMPS FOR CARRYING OUT HEATING TESTS ON LUMINAIRES
    14/30260340 DC : 0 BS 5499-10 - GUIDANCE FOR THE SELECTION AND USE OF SAFETY SIGNS AND FIRE SAFETY NOTICES
    BS 7909(1998) : 1998 CODE OF PRACTICE FOR DESIGN AND INSTALLATION OF TEMPORARY DISTRIBUTION SYSTEMS DELIVERING A.C. ELECTRICAL SUPPLIES FOR LIGHTING, TECHNICAL SERVICES AND OTHER ENTERTAINMENT RELATED PURPOSES
    15/30300479 DC : 0 BS 8442 - MISCELLANEOUS ROAD TRAFFIC SIGNS AND DEVICES - REQUIREMENTS AND TEST METHODS
    BS EN 60928 : 1995 AUXILIARIES FOR LAMPS - A.C. SUPPLIED ELECTRONIC BALLASTS FOR TUBULAR FLUORESCENT LAMPS - GENERAL AND SAFETY REQUIREMENTS
    12/30217236 DC : DRAFT JUNE 2012 BS 5489-1 - CODE OF PRACTICE FOR THE DESIGN OF ROAD LIGHTING - LIGHTING OF ROADS AND PUBLIC AMENITY AREAS
    BS EN 60570-2-1 : 1995 ELECTRICAL SUPPLY TRACK SYSTEMS FOR LUMINAIRES - MIXED SUPPLY SYSTEMS - CLASSES 1 AND 3
    BS EN 60598-2-6 : 1995 LUMINAIRES - PARTICULAR REQUIREMENTS - PART 2-6: LUMINAIRES WITH BUILT-IN TRANSFORMERS FOR FILAMENT LAMPS
    12/30259039 DC : 0 BS 4HR 100 - PROCEDURE FOR INSPECTION TESTING AND ACCEPTANCE OF WROUGHT HEAT-RESISTING ALLOYS
    BS 7909(2011) : 2011 CODE OF PRACTICE FOR TEMPORARY ELECTRICAL SYSTEMS FOR ENTERTAINMENT AND RELATED PURPOSES
    06/30036109 DC : DRAFT APR 2006 BS 8442 - MISCELLANEOUS ROAD TRAFFIC SIGNS AND DEVICES - REQUIREMENTS AND TEST METHODS
    ENA ER G81-5 : ISSUE 2 2016 FRAMEWORK FOR NEW INDUSTRIAL AND COMMERCIAL UNDERGROUND CONNECTIONS - PART 5: MATERIALS SPECIFICATION
    BS 8442:2015 (published 2015-11) Miscellaneous road traffic signs and devices. Requirements and test methods
    12/30240259 DC : 0 BS 8541-4 - LIBRARY OBJECTS FOR ARCHITECTURE, ENGINEERING AND CONSTRUCTION - PART 4: ATTRIBUTES FOR SPECIFICATION AND ASSESSMENT - CODE OF PRACTICE
    BS 5499-10(2006) : 2006 SAFETY SIGNS, INCLUDING FIRE SAFETY SIGNS - PART 10: CODE OF PRACTICE FOR THE USE OF SAFETY SIGNS, INCLUDING FIRE SAFETY SIGNS
    BS 5266-2(1998) : 1998 EMERGENCY LIGHTING - CODE OF PRACTICE FOR ELECTRICAL LOW MOUNTED WAY GUIDANCE SYSTEMS FOR EMERGENCY USE
    BS 5266-6(1999) : 1999 EMERGENCY LIGHTING - PART 6: CODE OF PRACTICE FOR NON-ELECTRICAL LOW MOUNTED WAY GUIDANCE SYSTEMS FOR EMERGENCY USE - PHOTOLUMINESCENT SYSTEMS
    BS 5499-10(2014) : 2014 GUIDANCE FOR THE SELECTION AND USE OF SAFETY SIGNS AND FIRE SAFETY NOTICES
    BS 6396(2002) : 2002 ELECTRICAL SYSTEMS IN OFFICE FURNITURE AND OFFICE SCREENS - SPECIFICATION
    BS 8442(2006) : 2006 MISCELLANEOUS ROAD TRAFFIC SIGNS AND DEVICES - REQUIREMENTS AND TEST METHODS
    BS 5499-4:2000 SAFETY SIGNS, INCLUDING FIRE SAFETY SIGNS - PART 4: CODE OF PRACTICE FOR ESCAPE ROUTE SIGNING
    BS 5489-1(2003) : 2003 CODE OF PRACTICE FOR THE DESIGN OF ROAD LIGHTING - PART 1: LIGHTING OF ROADS AND PUBLIC AMENITY AREAS
    08/30177004 DC : DRAFT JULY 2008 BS 6396 - ELECTRICAL SYSTEMS IN OFFICE FURNITURE AND OFFICE SCREENS - SPECIFICATION
    BS EN 60598-2-18 : 1994 LUMINAIRES - PART 2-18: PARTICULAR REQUIREMENTS - LUMINAIRES FOR SWIMMING POOLS AND SIMILAR APPLICATIONS
    BIP 2081 : 2012 A GUIDE TO EMERGENCY LIGHTING
    05/30122879 DC : DRAFT SEP 2005 BS 5499-10 - SAFETY SIGNS, INCLUDING FIRE SAFETY SIGNS - PART 10: CODE OF PRACTICE FOR THE USE OF SAFETY SIGNS, INCLUDING FIRE SAFETY SIGNS
    BS 5499-4:2013 Safety signs. Code of practice for escape route signing
    BS 7671(2008) : 2018 REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - IET WIRING REGULATIONS
    BS 7671(2008) : 2008 REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - IET WIRING REGULATIONS
    BS 5489-9(1996) : 1996 ROAD LIGHTING - CODE OF PRACTICE FOR LIGHTING FOR URBAN CENTRES AND PUBLIC AMENITY AREAS
    BS 6396:2008+A1:2015 ELECTRICAL SYSTEMS IN OFFICE FURNITURE AND EDUCATIONAL FURNITURE - SPECIFICATION
    BS 7671(2008) : 2018 REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - IET WIRING REGULATIONS
    BS 8442:2006 MISCELLANEOUS ROAD TRAFFIC SIGNS AND DEVICES - REQUIREMENTS AND TEST METHODS
    BS 7671(2008) : 2008 REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - IET WIRING REGULATIONS
    BS 5489-1(2003) : 2003 CODE OF PRACTICE FOR THE DESIGN OF ROAD LIGHTING - PART 1: LIGHTING OF ROADS AND PUBLIC AMENITY AREAS
    EN 60598-2-18:1994/A1:2012 LUMINAIRES - PART 2: PARTICULAR REQUIREMENTS - SECTION 18: LUMINAIRES FOR SWIMMING POOLS AND SIMILAR APPLICATIONS
    BS 5489-1:2013 CODE OF PRACTICE FOR THE DESIGN OF ROAD LIGHTING - PART 1: LIGHTING OF ROADS AND PUBLIC AMENITY AREAS
    EN 60570-2-1:1994/A1:1996 ELECTRICAL SUPPLY TRACK SYSTEMS FOR LUMINAIRES - MIXED SUPPLY SYSTEMS - CLASSES 1 AND 3
    BS 6396(2008) : 2008 ELECTRICAL SYSTEMS IN OFFICE FURNITURE AND EDUCATIONAL FURNITURE - SPECIFICATION
    BS 6396:2008+A1:2015 (published 2015-12) Electrical systems in office furniture and educational furniture. Specification
    BS 6396:2002 (published 2002-09) Electrical systems in office furniture and office screens. Specification

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV Information technology equipment - Safety - Part 1: General requirements
    IEC 60112:2003+AMD1:2009 CSV METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS
    EN 60634 : 1995 HEAT TEST SOURCE (H.T.S.) LAMPS FOR CARRYING OUT HEATING TESTS ON LUMINAIRES
    IEC 60811-3-1:1985 COMMON TEST METHODS FOR INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - METHODS SPECIFIC TO PVC COMPOUNDS - PRESSURE TEST AT HIGH TEMPERATURE - TESTS FOR RESISTANCE TO CRACKING
    IEC 60432-1:1999+AMD1:2005+AMD2:2011 CSV Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes
    EN 60068-2-75:2014 ENVIRONMENTAL TESTING - PART 2-75: TESTS - TEST EH: HAMMER TESTS (IEC 60068-2-75:2014)
    IEC 60238:2016+AMD1:2017 CSV Edison screw lampholders
    IEC 60061-3:2005 CSV Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
    EN 62031:2008/A2:2015 LED MODULES FOR GENERAL LIGHTING - SAFETY SPECIFICATIONS (IEC 62031:2008/A2:2014)
    IEC 60384-14:2013+AMD1:2016 CSV Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
    IEC 60662:2011 High-pressure sodium vapour lamps - Performance specifications
    EN 60238 : 2004 AMD 2 2011 EDISON SCREW LAMPHOLDERS (IEC 60238:2004/A2:2011)
    IEC 60682:1980 STANDARD METHOD OF MEASURING THE PINCH TEMPERATURE OF QUARTZ-TUNGSTEN-HALOGEN LAMPS
    EN 61347-2-9:2013 LAMP CONTROLGEAR - PART 2-9: PARTICULAR REQUIREMENTS FOR ELECTROMAGNETIC CONTROLGEAR FOR DISCHARGE LAMPS (EXCLUDING FLUORESCENT LAMPS) (IEC 61347-2-9:2012)
    EN 60065:2014/AC:2017-01 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014/COR2:2016)
    IEC 60050-195:1998 International Electrotechnical Vocabulary (IEV) - Part 195: Earthing and protection against electric shock
    IEC 60634:1993 HEAT TEST SOURCE (H.T.S.) LAMPS FOR CARRYING OUT HEATING TESTS ON LUMINAIRES
    EN 60085:2008 ELECTRICAL INSULATION - THERMAL EVALUATION AND DESIGNATION
    IEC 60364-4-41:2005+AMD1:2017 CSV Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
    EN 61558-1:2005/A1:2009 SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS
    IEC 61347-2-9:2012 Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps)
    IEC TR 60083:2015 Plugs and socket-outlets for domestic and similar general use standardized in member countries of IEC
    IEC TR 62471-2:2009 Photobiological safety of lamps and lamp systems - Part 2: Guidance on manufacturing requirements relating to non-laser optical radiation safety
    IEC 61210:2010 Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements
    HD 60364-4-41:2017/A11:2017 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-41: PROTECTION FOR SAFETY - PROTECTION AGAINST ELECTRIC SHOCK
    EN 61199:2011/A2:2015 SINGLE-CAPPED FLUORESCENT LAMPS - SAFETY SPECIFICATIONS (IEC 61199:2011/A2:2014)
    EN 60432-2:2000/A2:2012 INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 2: TUNGSTEN HALOGEN LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES
    EN 60400:2017 LAMPHOLDERS FOR TUBULAR FLUORESCENT LAMPS AND STARTERHOLDERS (IEC 60400:2017)
    IEC 60061-2:2005 CSV Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
    IEC 60570:2003+AMD1:2017 CSV Electrical supply track systems for luminaires
    IEC 60929:2011+AMD1:2015 CSV AC and/or DC-supplied electronic control gear for tubularfluorescent lamps - Performance requirements
    IEC 60598-2-5:2015 LUMINAIRES - PART 2-5: PARTICULAR REQUIREMENTS - FLOODLIGHTS
    IEC 60400:2017 Lampholders for tubular fluorescent lamps and starterholders
    EN 61558-2-5:2010 SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - PART 2-5: PARTICULAR REQUIREMENTS AND TESTS FOR TRANSFORMER FOR SHAVERS, POWER SUPPLY UNITS FOR SHAVERS AND SHAVER SUPPLY UNITS
    IEC 60598-2-6:1994 LUMINAIRES - PARTICULAR REQUIREMENTS - LUMINAIRES WITH BUILT IN TRANSFORMERS FOR FILAMENT LAMPS
    ISO 75-2:2013 Plastics Determination of temperature of deflection under load Part 2: Plastics and ebonite
    EN 60112 : 2003 AMD 1 2009 METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS
    IEC 60085:2007 ELECTRICAL INSULATION - THERMAL EVALUATION AND DESIGNATION
    IEC 61199:2011+AMD1:2012+AMD2:2014 CSV Single-capped fluorescent lamps - Safety specifications
    IEC 61167:2015 Metal halide lamps - Performance specification
    IEC 60925:1989+AMD1:1996+AMD2:2001 CSV SPECIFICATION FOR PERFORMANCE REQUIREMENTS FOR D.C. SUPPLIED ELECTRONIC BALLASTS FOR TUBULAR FLUORESCENT LAMPS
    IEC 61346-1:1996 Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Part 1: Basic rules
    EN 60357:2003/A11:2016 TUNGSTEN HALOGEN LAMPS (NON-VEHICLE) - PERFORMANCE SPECIFICATIONS
    IEC 60364-7-702:2010 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-702: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SWIMMING POOLS AND FOUNTAINS
    IEC 60921:2004+AMD1:2006 CSV Ballasts for tubular fluorescent lamps - Performance requirements
    IEC 61558-1:2017 Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests
    IEC 60598-2-3:2002+AMD1:2011 CSV Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting
    IEC 60901:1996+AMD1:1997+AMD2:2000 CSV Single-capped fluorescent lamps - Performance specifications
    IEC 60364-7-701:2006 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-701: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - LOCATIONS CONTAINING A BATH OR SHOWER
    EN 60360:1998 STANDARD METHOD OF MEASUREMENT OF LAMP CAP TEMPERATURE RISE
    IEC 62035:2014+AMD1:2016 CSV Discharge lamps (excluding fluorescent lamps) - Safety specifications
    IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
    IEC 61058-1:2016 Switches for appliances - Part 1: General requirements
    EN 60695-2-10:2013 FIRE HAZARD TESTING - PART 2-10: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE APPARATUS AND COMMON TEST PROCEDURE (IEC 60695-2-10:2013)
    EN 62035:2014 DISCHARGE LAMPS (EXCLUDING FLUORESCENT LAMPS) - SAFETY SPECIFICATIONS (IEC 62035:2014, MODIFIED)
    IEC 60989:1991 Separating transformers, autotransformers, variable transformersand reactors.
    EN 61032 : 1998 PROTECTION OF PERSONS AND EQUIPMENT BY ENCLOSURES - PROBES FOR VERIFICATION (IEC 61032:1997)
    EN 60664-1:2007 INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
    IEC 80416-1:2008 BASIC PRINCIPLES FOR GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT - PART 1: CREATION OF GRAPHICAL SYMBOLS FOR REGISTRATION
    IEC 62471:2006 Photobiological safety of lamps and lamp systems
    HD 193 : 200S2 VOLTAGE BANDS FOR ELECTRICAL INSTALLATIONS OF BUILDINGS
    EN 60155:1995/A2:2007 GLOW-STARTERS FOR FLUORESCENT LAMPS
    IEC 61535:2009+AMD1:2012 CSV Installation couplers intended for permanent connection in fixedinstallations
    IEC 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
    EN 61058-1:2002/A2:2008 SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS
    EN 61184:2017 Bayonet lampholders
    EN 61140:2016 PROTECTION AGAINST ELECTRIC SHOCK - COMMON ASPECTS FOR INSTALLATION AND EQUIPMENT (IEC 61140:2016)
    EN 61558-2-6:2009 SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND SIMILAR PRODUCTS FOR SUPPLY VOLTAGES UP TO 1100 V - PART 2-6: PARTICULAR REQUIREMENTS AND TESTS FOR SAFETY ISOLATING TRANSFORMERS AND POWER SUPPLY UNITS INCORPORATING SAFETY ISOLATING TRANSFORMERS
    IEC 61558-2-5:2010 SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - PART 2-5: PARTICULAR REQUIREMENTS AND TEST FOR TRANSFORMER FOR SHAVERS, POWER SUPPLY UNITS FOR SHAVERS AND SHAVER SUPPLY UNITS
    IEC 60695-10-2:2014 FIRE HAZARD TESTING - PART 10-2: ABNORMAL HEAT - BALL PRESSURE TEST METHOD
    IEC TR 60972:1989 CLASSIFICATION AND INTERPRETATION OF NEW LIGHTING PRODUCTS
    IEC 60432-2:1999+AMD1:2005+AMD2:2012 CSV Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes
    EN 60662:2012 HIGH-PRESSURE SODIUM VAPOUR LAMPS - PERFORMANCE SPECIFICATIONS (IEC 60662:2011, MODIFIED)
    ISO 4046-4:2002 Paper, board, pulps and related terms Vocabulary Part 4: Paper and board grades and converted products
    EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
    EN 60432-3:2013 INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 3: TUNGSTEN-HALOGEN LAMPS (NON-VEHICLE) (IEC 60432-3:2012)
    AS 3771-1998 Road lighting luminaires with integral control gear
    IEC 61140:2016 Protection against electric shock - Common aspects for installation and equipment
    EN 80416-1:2009 BASIC PRINCIPLES FOR GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT - PART 1: CREATION OF GRAPHICAL SYMBOLS FOR REGISTRATION
    IEC 60155:1993 GLOW STARTERS FOR FLUORESCENT LAMPS
    EN 60432-1:2000/A2:2012 INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 1 - TUNGSTEN FILAMENT LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES (IEC 60432-1:1999/A2:2011)
    EN 60695-11-5:2017 FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE (IEC 60695-11-5:2016)
    IEC 61032:1997 Protection of persons and equipment by enclosures - Probes for verification
    IEC 60923:2005+AMD1:2006 CSV Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements
    IEC 60432-3:2012 Incandescent lamps - Safety specifications - Part 3: Tungsten halogen lamps (non-vehicle)
    IEC 60695-11-5 : 2.0 FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE
    IEC 60695-2-10:2013 Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure
    EN 62471 : 2008 PHOTOBIOLOGICAL SAFETY OF LAMPS AND LAMP SYSTEMS
    IEC 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
    IEC 62031:2008+AMD1:2012+AMD2:2014 CSV LED MODULES FOR GENERAL LIGHTING - SAFETY SPECIFICATIONS
    IEC 60598-2-4:2017 LUMINAIRES - PART 2-4: PARTICULAR REQUIREMENTS - PORTABLE GENERAL PURPOSE LUMINAIRES
    IEC 61184:2017 Bayonet lampholders
    IEC 60990:2016 Methods of measurement of touch current and protective conductor current
    ISO 16893-1:2008 Wood-based panels Particleboard Part 1: Classifications
    IEC 60360:1998 Standard method of measurement of lamp cap temperature rise
    EN 60682:1993/A2:1997 METHOD OF MEASURING THE PINCH TEMPERATURE OF QUARTZ GLASS LAMPS
    IEC 61195:1999+AMD1:2012+AMD2:2014 CSV Double-capped fluorescent lamps - Safety specifications
    EN 60990:2016 METHODS OF MEASUREMENT OF TOUCH CURRENT AND PROTECTIVE CONDUCTOR CURRENT (IEC 60990:2016)
    ISO 1891:2009 Fasteners Terminology
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective