Skip to content
Please enter a keyword to search

  • BS ISO 14990-1:2016

    Current The latest, up-to-date edition.

    Earth-moving machinery. Electrical safety of machines utilizing electric drives and related components and systems General requirements

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  31-03-2017

    Publisher:  British Standards Institution

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    Introduction
    1 Scope
    2 Normative references
    3 Terms, definitions and abbreviated terms
    4 General requirements
    5 Protection against electric shock hazards
    6 Protection against electrical fire hazards
    7 Protection against thermal hazards
    8 Protection against mechanical hazards
    9 Protection against abnormal operation hazards
    10 Electric power source
    11 Wiring
    12 Electric motors and generators
    13 Non-motor loads
    14 Controls
    15 Manuals and technical documentation
    16 Marking
    17 Tests
    Annex A (informative) - List of significant hazards
    Annex B (normative) - TN systems - Protection against
            indirect contact
    Annex C (informative) - Explanation of emergency
            operation functions
    Annex D (informative) - Comparison of selected requirements
            of ISO 14990, UN ECE R100 and ISO 6469-3
    Bibliography

    Abstract - (Show below) - (Hide below)

    Gives requirements for the electrical equipment and its components incorporated into earth-moving machines (EMMs) as defined in ISO 6165, and addresses the safety of operators, technicians, service/maintenance personnel and bystanders.

    General Product Information - (Show below) - (Hide below)

    Committee B/513/1
    Development Note Supersedes 15/30286010 DC. (03/2017)
    Document Type Standard
    Publisher British Standards Institution
    Status Current
    Supersedes

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 14572:2011 Road vehicles — Round, sheathed, 60 V and 600 V screened and unscreened single- or multi-core cables — Test methods and requirements for basic- and high-performance cables
    IEC 61800-3:2017 Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods
    IEC 60364-5-54:2011 Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
    IEEE 3007.1 : 2010 RECOMMENDED PRACTICE FOR THE OPERATION AND MANAGEMENT OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
    IEC 60038:2009 IEC standard voltages
    ISO 7010:2011 Graphical symbols Safety colours and safety signs Registered safety signs
    ISO 20474-1:2017 Earth-moving machinery — Safety — Part 1: General requirements
    IEC 61000-6-4:2006+AMD1:2010 CSV ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
    IEC 60364-4-43:2008 Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent
    IEC 60228:2004 Conductors of insulated cables
    ISO 14122-3:2016 Safety of machinery Permanent means of access to machinery Part 3: Stairs, stepladders and guard-rails
    IEC 62271-200:2011 High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
    IEC 61984:2008 Connectors - Safety requirements and tests
    IEEE 3001.8 : 2013 RECOMMENDED PRACTICE FOR THE INSTRUMENTATION AND METERING OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
    ISO 14122-1:2016 Safety of machinery Permanent means of access to machinery Part 1: Choice of fixed means and general requirements of access
    IEEE 3003.2 : 2014 RECOMMENDED PRACTICE FOR EQUIPMENT GROUNDING AND BONDING IN INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
    IEEE 3007.2 : 2010 This recommended practice covers the maintenance of industrial and commercial power systems.
    ISO 15817:2012 Earth-moving machinery — Safety requirements for remote operator control systems
    IEC 62271-201:2014 High-voltage switchgear and controlgear - Part 201: AC solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
    IEC 60364-4-41:2005+AMD1:2017 CSV Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
    IEC 61000-6-2:2016 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
    ISO 6405-2:2017 Earth-moving machinery Symbols for operator controls and other displays Part 2: Symbols for specific machines, equipment and accessories
    ISO 13732-1:2006 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
    IEC 60502-1:2004+AMD1:2009 CSV Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV(Um = 36 kV) - Part 1: Cables for rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV)
    IEEE 3004.5 : 2014 RECOMMENDED PRACTICE FOR THE APPLICATION OF LOW-VOLTAGE CIRCUIT BREAKERS IN INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
    IEC GUIDE 106:1996 Guide for specifying environmental conditions for equipmentperformance rating
    CSA Z462 : 2015 WORKPLACE ELECTRICAL SAFETY
    IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
    IEC 61000-6-1 : 3.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
    IEC 60204-11:2000 Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV
    IEC 60947-5-1 : 4.0 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
    ISO 14118:2000 Safety of machinery Prevention of unexpected start-up
    ISO 13851:2002 Safety of machinery Two-hand control devices Functional aspects and design principles
    ISO/TS 13732-2:2001 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 2: Human contact with surfaces at moderate temperature
    IEC 60204-32:2008 Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
    IEC 60269-1:2006+AMD1:2009+AMD2:2014 CSV Low-voltage fuses - Part 1: General requirements
    IEC 61558-2-6:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers
    IEEE 3006.9-2013 IEEE Recommended Practice for Collecting Data for Use in Reliability, Availability, and Maintainability Assessments of Industrial and Commercial Power Systems
    IEC 60947-7-1:2009 Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors
    IEEE 3007.3-2012 IEEE Recommended Practice for Electrical Safety in Industrial and Commercial Power Systems
    IEC TR 61000-5-2:1997 Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 2: Earthing and cabling
    ISO 6165:2012 Earth-moving machinery — Basic types — Identification and terms and definitions
    ISO 6011:2003 Earth-moving machinery — Visual display of machine operation
    IEC 61082-1:2014 RLV Preparation of documents used in electrotechnology - Part 1: Rules
    ISO 12100:2010 Safety of machinery General principles for design Risk assessment and risk reduction
    ISO 14122-4:2016 Safety of machinery Permanent means of access to machinery Part 4: Fixed ladders
    IEC 60757:1983 Code for designation of colours
    ISO/TR 14121-2:2012 Safety of machinery — Risk assessment — Part 2: Practical guidance and examples of methods
    IEC 60364-1:2005 Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions
    ISO 9244:2008 Earth-moving machinery Machine safety labels General principles
    IEC 61558-2-17:1997 Safety of power transformers, power supply units and similar - Part2: Particular requirements for transformers for switch mode powersupplies
    IEC 60364-6:2016 Low voltage electrical installations - Part 6: Verification
    IEC 61180-2:1994 High-voltage test techniques for low-voltage equipment - Part 2: Test equipment
    IEC 61558-1:2017 Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests
    ISO 2860:1992 Earth-moving machinery — Minimum access dimensions
    ISO 6722-1:2011 Road vehicles — 60 V and 600 V single-core cables — Part 1: Dimensions, test methods and requirements for copper conductor cables
    IEC 60871-1:2014 Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V - Part 1: General
    IEC 61084-1:2017 Cable trunking systems and cable ducting systems for electrical installations - Part 1: General requirements
    IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
    CISPR 61000-6-3:1996 Electromagnetic compatibility (EMC) - Part 6: Generic standards - Section 3: Emission standard for residential, commercial and light-industrial environments
    NFPA 70E : 2018 ELECTRICAL SAFETY IN THE WORKPLACE
    IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV Low-voltage switchgear and controlgear - Part 1: General rules
    ISO 15998:2008 Earth-moving machinery Machine-control systems (MCS) using electronic components Performance criteria and tests for functional safety
    ISO 6405-1:2017 Earth-moving machinery Symbols for operator controls and other displays Part 1: Common symbols
    ISO 13849-2:2012 Safety of machinery — Safety-related parts of control systems — Part 2: Validation
    IEC 61230:2008 Live working - Portable equipment for earthing or earthing and short-circuiting
    ISO 3457:2003 Earth-moving machinery Guards Definitions and requirements
    IEEE 3006.2 : 2016 RECOMMENDED PRACTICE FOR EVALUATING THE RELIABILITY OF EXISTING INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
    IEC 60034-1:2017 Rotating electrical machines - Part 1: Rating and performance
    IEC 61000-6-1:2016 Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments
    IEC 61496-1:2012 Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests
    IEEE 3006.5 : 2014 RECOMMENDED PRACTICE FOR THE USE OF PROBABILITY METHODS FOR CONDUCTING A RELIABILITY ANALYSIS OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
    ISO 14990-3:2016 Earth-moving machinery — Electrical safety of machines utilizing electric drives and related components and systems — Part 3: Particular requirements for self-powered machines
    IEC 62271-1:2017 High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear
    IEC 61000-6-4:2006+AMD1:2010 CSV Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
    HD 516 S2:1997/A2:2008 GUIDE TO USE OF LOW VOLTAGE HARMONIZED CABLES
    ISO 3864-1:2011 Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings
    ISO 13766:2006 Earth-moving machinery Electromagnetic compatibility
    IEC 60071-2:1996 Insulation co-ordination - Part 2: Application guide
    ISO 6469-3:2011 Electrically propelled road vehicles Safety specifications Part 3: Protection of persons against electric shock
    ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
    IEC 60947-5-2:2007+AMD1:2012 CSV Low-voltage switchgear and controlgear - Part 5-2: Control circuitdevices and switching elements - Proximity switches
    IEC 60947-3:2008+AMD1:2012+AMD2:2015 CSV Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
    IEC 61439-1:2011 Low-voltage switchgear and controlgear assemblies - Part 1: General rules
    IEC 60947-2:2016 Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
    ISO 7000:2014 Graphical symbols for use on equipment Registered symbols
    IEC 61140:2016 Protection against electric shock - Common aspects for installation and equipment
    ISO 14122-2:2016 Safety of machinery Permanent means of access to machinery Part 2: Working platforms and walkways
    IEC 60071-1:2006+AMD1:2010 CSV Insulation co-ordination - Part 1: Definitions, principles and rules
    IEC 60309-1:1999+AMD1:2005+AMD2:2012 CSV Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
    ISO 2867:2011 Earth-moving machinery Access systems
    ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
    IEC 61000-6-2 : 3.0:2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS
    IEC 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
    ISO 14990-2:2016 Earth-moving machinery — Electrical safety of machines utilizing electric drives and related components and systems — Part 2: Particular requirements for externally-powered machines
    IEC 61851-1:2017 Electric vehicle conductive charging system - Part 1: General requirements
    IEEE 3004.1-2013 RECOMMENDED PRACTICE FOR THE APPLICATION OF INSTRUMENT TRANSFORMERS IN INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
    IEC 62271-102:2001+AMD1:2011+AMD2:2013 CSV High-voltage switchgear and controlgear - Part 102: Alternatingcurrent disconnectors and earthing switches
    IEC 60364-5-52:2009 Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems
    ISO 10968:2004 Earth-moving machinery Operator's controls
    IEC 62196-1:2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
    IEEE 3001.5 : 2013 RECOMMENDED PRACTICE FOR THE APPLICATION OF POWER DISTRIBUTION APPARATUS IN INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective