NSF 61 : 2016
|
DRINKING WATER SYSTEM COMPONENTS - HEALTH EFFECTS |
ASTM D 2467 : 2015 : REDLINE
|
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 |
ASTM D 618 : 2013 : REDLINE
|
Standard Practice for Conditioning Plastics for Testing |
AWWA M23 : 2
|
PVC PIPE - DESIGN AND INSTALLATION |
ASTM D 3261 : 2016-11
|
SPECIFICATION FOR BUTT HEAT FUSION POLYETHYLENE (PE) PLASTIC FITTINGS FOR POLYETHYLENE (PE) PLASTIC PIPE AND TUBING |
ASTM D 6394 : 2014 : REDLINE
|
Standard Specification for Sulfone Plastics (SP) |
ASSE 1061 : 2015
|
PERFORMANCE REQUIREMENTS FOR PUSH-FIT FITTINGS |
C22.1-15
|
Canadian Electrical Code, Part I (23rd Edition), Safety Standard for Electrical Installations |
ASTM F 610/F610M : 2015 : REDLINE
|
Standard Practice for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique |
ASTM F 493 : 2014 : REDLINE
|
Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings |
ASTM D 1149 : 2016-02
|
TEST METHODS FOR RUBBER DETERIORATION - CRACKING IN AN OZONE CONTROLLED ENVIRONMENT |
ISO 3127:1994
|
Thermoplastics pipes — Determination of resistance to external blows — Round-the-clock method |
ISO 6964:1986
|
Polyolefin pipes and fittings Determination of carbon black content by calcination and pyrolysis Test method and basic specification |
ASTM D 1238 : 2013 : REDLINE
|
Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer |
ASTM D 2464 : 2015 : REDLINE
|
Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 |
ISO 3501:2015
|
Plastics piping systems Mechanical joints between fittings and pressure pipes Test method for resistance to pull-out under constant longitudinal force |
ISO 9080:2012
|
Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation |
ISO 13477:2008
|
Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Small-scale steady-state test (S4 test) |
ASTM B 584 : 2014 : REDLINE
|
Standard Specification for Copper Alloy Sand Castings for General Applications |
CAN/CSA-Z662-15
|
Oil and gas pipeline systems |
ASTM D 792 : 2013 : REDLINE
|
Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement |
ASTM F 1282 : 2017 : REDLINE
|
Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe |
ASTM F 477 : 2014 : REDLINE
|
Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe |
AWWA M11 : 2004
|
STEEL PIPE: A GUIDE FOR DESIGN AND INSTALLATION |
ISO 11357-3:2011
|
Plastics Differential scanning calorimetry (DSC) Part 3: Determination of temperature and enthalpy of melting and crystallization |
ISO 12162:2009
|
Thermoplastics materials for pipes and fittings for pressure applications Classification, designation and design coefficient |
ISO 13478:2007
|
Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Full-scale test (FST) |
ASTM D 1603 : 2014 : REDLINE
|
Standard Test Method for Carbon Black Content in Olefin Plastics |
ASTM D 2104 : 2003
|
Standard Specification for Polyethylene (PE) Plastic Pipe, Schedule 40 (Withdrawn 2010) |
ASTM D 2513 : 2017-01
|
SPECIFICATION FOR POLYETHYLENE (PE) GAS PRESSURE PIPE, TUBING, AND FITTINGS |
ASTM F 1281 : 2017 : REDLINE
|
Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe |
CSA C448 SERIES : 2016
|
DESIGN AND INSTALLATION OF GROUND SOURCE HEAT PUMP SYSTEMS FOR COMMERCIAL AND RESIDENTIAL BUILDINGS |
ASTM D 4066 : 2013
|
Standard Classification System for Nylon Injection and Extrusion Materials (PA) |
ASTM D 2466 : 2017 : REDLINE
|
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 |
ASTM D 2444 : 1999
|
Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight) |
ASTM F 2023 : 2015 : REDLINE
|
Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Pipe, Tubing and Systems to Hot Chlorinated Water |
ASTM D 2765 : 2016 : REDLINE
|
Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics |
CSA B128.1/B128.2 : 2006
|
DESIGN AND INSTALLATION OF NON-POTABLE WATER SYSTEMS/MAINTENANCE AND FIELD TESTING OF NON-POTABLE WATER SYSTEMS |
ISO 1183-1:2012
|
Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method |
ISO 307:2007
|
Plastics Polyamides Determination of viscosity number |
ISO 6509:1981
|
Corrosion of metals and alloys Determination of dezincification resistance of brass |
ASTM D 2122 : 2016 : REDLINE
|
Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings |
ISO 15512:2016
|
Plastics Determination of water content |
CSA ISO 9001 : 2016
|
QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS |
ASTM D 2290 : 2016-12
|
TEST METHOD FOR APPARENT HOOP TENSILE STRENGTH OF PLASTIC OR REINFORCED PLASTIC PIPE |
ASTM D 3350 : 2014 : REDLINE
|
Standard Specification for Polyethylene Plastics Pipe and Fittings Materials |
ASTM F 656 : 2015 : REDLINE
|
Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings |
CSA B125 : 2001
|
PLUMBING FITTINGS |
ASTM D 695 : 2015 : REDLINE
|
Standard Test Method for Compressive Properties of Rigid Plastics |
ASTM B 62 : 2017 : REDLINE
|
Standard Specification for Composition Bronze or Ounce Metal Castings |
AWWA C800 : 2014
|
UNDERGROUND SERVICE LINE VALVES AND FITTINGS |
ASTM D 471 : 2016-02
|
TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
ASTM D 3035 : 2015 : REDLINE
|
Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter |
CSA Z234.3 : 1989
|
GUIDE FOR THE SELECTION AND USE OF PREFERRED NUMBERS |
ISO 6957:1988
|
Copper alloys Ammonia test for stress corrosion resistance |
ASTM D 638 : 2014 : REDLINE
|
Standard Test Method for Tensile Properties of Plastics |
ASTM D 1784 : 2011 : REDLINE
|
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds |
NSF 372 : 2016
|
DRINKING WATER SYSTEM COMPONENTS - LEAD CONTENT |
ASTM E 8/E8M : 2016-09
|
TEST METHODS FOR TENSION TESTING OF METALLIC MATERIALS |
ASTM D 746 : 2014 : REDLINE
|
Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact |
ASTM D 1693 : 2015 : REDLINE
|
Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics |