EN 12016:2013
|
Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity |
ISO/IEC 17000:2004
|
Conformity assessment Vocabulary and general principles |
ANSI A92.1 : 1977
|
MOBILE LADDER STANDS AND SCAFFOLDS (TOWERS), MANUALLY PROPELLED, |
ISO/TS 14798:2006
|
Lifts (elevators), escalators and moving walks Risk assessment and reduction methodology |
ASCE 7 02 : 2003
|
MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES |
C22.1-15
|
Canadian Electrical Code, Part I (23rd Edition), Safety Standard for Electrical Installations |
CSA B355 : 2015
|
LIFTS FOR PERSONS WITH PHYSICAL DISABILITIES |
ISO 3411:2007
|
Earth-moving machinery Physical dimensions of operators and minimum operator space envelope |
ISO 7250:1996
|
Basic human body measurements for technological design |
CSA S16 : 2014
|
DESIGN OF STEEL STRUCTURES |
CSA Z150 : 2016
|
SAFETY CODE ON MOBILE CRANES |
B167-16
|
Overhead cranes, gantry cranes, monorails, hoists, and jib cranes |
CSA B335 : 2015
|
SAFETY STANDARD FOR LIFT TRUCKS |
ISO 13852:1996
|
Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs |
IEC 61508-5:2010
|
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels (see Functional Safety and IEC 61508) |
CSA B44.1 : 2014
|
ELEVATOR AND ESCALATOR ELECTRICAL EQUIPMENT |
CFR 16(PTS1000-END) : 0
|
COMMERCIAL PRACTICES - FEDERAL TRADE COMMISSION - CONSUMER PRODUCT SAFETY COMMISSION |
NFPA 255 : 2006
|
TEST OF SURFACE BURNING CHARACTERISTICS OF BUILDING MATERIALS |
ISO/TS 22559-1:2004
|
Safety requirements for lifts (elevators) Part 1: Global essential safety requirements (GESRs) |
IEC 60364-1:2005
|
Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions |
ASME A17.1-2016/CSA B44-16
|
Safety code for elevators and escalators (Bi-national standard, with ASME A17.1) |
ICC A117.1 : 2009
|
ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES |
ISO/IEC Guide 51:2014
|
Safety aspects Guidelines for their inclusion in standards |
ISO 2860:1992
|
Earth-moving machinery — Minimum access dimensions |
ISO 15534-3:2000
|
Ergonomic design for the safety of machinery — Part 3: Anthropometric data |
A23.3-14
|
Design of concrete structures |
MIL-STD-882 Revision E:2012
|
System Safety |
CSA G40.20 G40.21 : 2013
|
GENERAL REQUIREMENTS FOR ROLLED OR WELDED STRUCTURAL QUALITY STEEL/STRUCTURAL QUALITY STEEL |
ASTM A 27/A27M : 2017 : REDLINE
|
Standard Specification for Steel Castings, Carbon, for General Application |
NFPA 70 : 2017
|
NATIONAL ELECTRICAL CODE |
ISO 14121:1999
|
Safety of machinery Principles of risk assessment |
ISO 13854:2017
|
Safety of machinery — Minimum gaps to avoid crushing of parts of the human body |
ISO 15534-1:2000
|
Ergonomic design for the safety of machinery — Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery |
ASTM E 8 : 2004
|
Standard Test Methods for Tension Testing of Metallic Materials |
ISO 11228-1:2003
|
Ergonomics Manual handling Part 1: Lifting and carrying |
CGSB 12.1 : 2017 CORR 1 2017
|
SAFETY GLAZING |
CSA Z185 : 1987
|
SAFETY CODE FOR PERSONNEL HOISTS |
ISO 15534-2:2000
|
Ergonomic design for the safety of machinery — Part 2: Principles for determining the dimensions required for access openings |
ACI 318 PACK : 2008
|
BUILDING CODE REQUIREMENTS FOR STRUCTURAL CONCRETE (ACI 318-08) & PCA NOTES ON ACI 318-08 |