• There are no items in your cart

CSA C22.2 No. 60745.1 : 2007 : R2012

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS

Available format(s)

Hardcopy , PDF

Superseded date

25-04-2020

Language(s)

English, French

Published date

01-01-2017

Preface
Canadian/US National Differences
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 General conditions for the tests
6 Void
7 Classification
8 Marking and instructions
9 Protection against access to live parts
10 Starting
11 Input and current
12 Heating
13 Leakage current
14 Moisture resistance
15 Electric strength
16 Overload protection of transformers and associated
   circuits
17 Endurance
18 Abnormal operation
19 Mechanical hazards
20 Mechanical strength
21 Construction
22 Internal wiring
23 Components
24 Supply connection and external flexible cords
25 Terminals for external conductors
26 Provision for earthing
27 Screws and connections
28 Creepage distances, clearances and distances through
   insulation
29 Resistance to heat, fire and tracking
30 Resistance to rusting
31 Radiation, toxicity and similar hazards
Annex A (normative) - Measurement of creepage distances
        and clearances
Annex B (normative) - Motors not isolated from the supply
        mains and having basic insulation not designed for
        the rated voltage of the tool
Annex C Void
Annex D Void
Annex E Void
Annex F (normative) - Needle-flame test
Annex G (normative) - Proof tracking test
Annex H Void
Annex I (normative) - Switches
Annex J (informative) - Selection and sequence of the tests
        of Clause 29
Annex K (normative) - Battery tools and battery packs
Annex L (normative) - Battery tools and battery packs provided
        with mains connection or non-isolated sources
Annex M (normative) - Safety of working stands for operation
        with hand-held motor-operated electric tools
Annex N (informative) - Rules for routine tests
Bibliography

Deals with the safety of hand-held motor-operated or magnetically driven electric tools, the rated voltage of the tools being not more than 250 V for single-phase a.c. or d.c. tools, and 440 V for three-phase a.c. tools.

DevelopmentNote
Also numbered as UL 60745-1. Supersedes CSA C22.2.745.1 and CSA C22.2.745.3. (05/2004)
DocumentType
Standard
Pages
192
ProductNote
Reconfirmed EN
PublisherName
Canadian Standards Association
Status
Superseded

CISPR 14-1:2016 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
IEC 60112:2003+AMD1:2009 CSV Method for the determination of the proof and the comparative tracking indices of solid insulating materials
CSA C22.2 No. 38 : 2014 THERMOSET-INSULATED WIRES AND CABLES
ISO 7010:2011 Graphical symbols Safety colours and safety signs Registered safety signs
IEC 60238:2016+AMD1:2017 CSV Edison screw lampholders
IEC 61540:1997+AMD1:1998 CSV Electrical accessories - Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs)
IEC 60127-3:2015 Miniature fuses - Part 3: Sub-miniature fuse-links
CSA C22.2 No. 223 : 2015 POWER SUPPLIES WITH EXTRA-LOW-VOLTAGE CLASS 2 OUTPUTS
IEC 60384-14:2013+AMD1:2016 CSV Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
ISO 3864-2:2016 Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety labels
CSA C22.2 No. 0.4 : 2004(R2013) BONDING OF ELECTRICAL EQUIPMENT
UL 60335-1:6ED 2016-10-31 Standard for Safety of Household and Similar Appliances, Part 1: General Requirements
CISPR 14-2:2015 RLV Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard
UL 83:16ED 2017-07-28 Standard for Thermoplastic-Insulated Wires and Cables
IEC 60825-1:2014 Safety of laser products - Part 1: Equipment classification and requirements
ISO 1463:2003 Metallic and oxide coatings Measurement of coating thickness Microscopical method
IEC 60695-2-11:2014 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT)
UL 943:5ED 2016-05-17 Ground-Fault Circuit-Interrupters
IEC 61558-2-6:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers
C22.2 NO. 43-17 Lampholders (Binational standard with UL 496)
IEC 60695-2-13:2010+AMD1:2014 CSV Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods- Glow-wire ignition temperature (GWIT) test method for materials
IEC 60999-1:1999 Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included)
IEC 60085:2007 Electrical insulation - Thermal evaluation and designation
IEC 61558-1:2017 Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests
CSA C22.2 No. 65 : 2013 WIRE CONNECTORS
IEC 60998-2-2:2002 Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
ISO 9772:2012 Cellular plastics Determination of horizontal burning characteristics of small specimens subjected to a small flame
IEC 61058-1:2016 Switches for appliances - Part 1: General requirements
IEC 60695-11-10:2013 Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
IEC 60061-1:2005 CSV Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
CSA C22.2 No. 210 : 2015 APPLIANCE WIRING MATERIAL PRODUCTS
CSA C22.2 No. 127 : 2015 EQUIPMENT AND LEAD WIRES
IEC 61000-3-3:2013 RLV Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection
IEC 60335-2-45:2002+AMD1:2008+AMD2:2011 CSV Household and similar electrical appliances - Safety - Part 2-45: Particular requirements for portable heating tools and similar appliances
ISO 2178:2016 Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method
IEC 60335-2-29:2016 Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers
C22.2 NO. 75-17 Thermoplastic insulated wires and cables (Trinational standard with UL 83 and NMX-J-010-ANCE-2017)
CSA E60825.1 : 2015 SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS
IEC 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
CISPR 11:2015 RLV Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
CSA C22.2 No. 107.1 : 2016 POWER CONVERSION EQUIPMENT
IEC 60695-11-5:2016 Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance
UL 496:14ED 2017-09-05 Lampholders
CSA C22.2 No. 144.1 : 2016 GROUND-FAULT CIRCUIT-INTERRUPTERS
IEC 60998-2-1:2002 Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units
IEC 60730-1:2013+AMD1:2015 CSV Automatic electrical controls - Part 1: General requirements

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.