• CSA C22.2 No. 65 : 2013

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

    WIRE CONNECTORS

    Available format(s):  Hardcopy, PDF

    Superseded date:  20-12-2019

    Language(s):  English

    Published date:  01-01-2013

    Publisher:  Canadian Standards Association

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Preface
    1 Scope
    2 Reference Publications
    3 Units of Measurement
    4 Definitions
    5 Symbols and Abbreviations
    6 Construction Requirements
    7 Test Requirements
    8 Sampling Requirements
    9 Test Methods
    10 Marking, Labeling, and Packaging
    ANNEX A - Informative References
    ANNEX B - Flammability Test (Material V-2 and VTM-2)
    ANNEX C - Examples
    ANNEX D - Stability Factor Calculation
    ANNEX E - Marking Locations Guide

    Abstract - (Show below) - (Hide below)

    Pertains to single-polarity connectors for use with all alloys of copper or aluminum, or copper-clad aluminum conductors, or all three, for providing contacts between current-carrying parts, in accordance with the Canadian Electrical Code, Part I, C22.1, in Canada, the National Electrical Code, NFPA-70, in the United States of America, or the Standard for Electrical Installations, NOM-001-SEDE, in Mexico, as follows: a) pressure wire connectors intended to hold one or more conductor(s); b) connectors intended for use in appliances and equipment that comply with the requirements for such appliances and equipment; c) soldering connectors; d) splicing wire connectors intended for use with 4 AWG (21.2 mm[2]) or larger conductors; e) neutral bars; f) uninsulated connectors that are used in circuits rated 35000 V and below; g) ampere-rated connectors not intended for general use; and h) insulation piercing connectors.

    General Product Information - (Show below) - (Hide below)

    Development Note Also numbered as UL 486A-486B and NMX-J-543-ANCE. (11/2003) Supersedes CSA C22.2.19 (06/2006)
    Document Type Standard
    Publisher Canadian Standards Association
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    CSA C22.2 No. 74 : 2016 EQUIPMENT FOR USE WITH ELECTRIC DISCHARGE LAMPS
    C22.2 NO. 229-17 Switching and metering centres
    CSA C22.2 No. 89 : 2015 SWIMMING-POOL LUMINAIRES, SUBMERSIBLE LUMINAIRES, AND ACCESSORIES
    CSA C22.2 No. 42 : 2010 : INC : UPD 2 : 2016 : R201500 GENERAL USE RECEPTACLES, ATTACHMENT PLUGS, AND SIMILAR WIRING DEVICES
    CSA C22.2 No. 42 : 2010 : INC : UPD 1 : 2013 GENERAL USE RECEPTACLES, ATTACHMENT PLUGS, AND SIMILAR WIRING DEVICES
    CSA C22.2 No. 218.1 : 2013 : INC : ERR 1 : 2013 SPAS, HOT TUBS, AND ASSOCIATED EQUIPMENT
    CSA C22.2 No. 42 : 2010 GENERAL USE RECEPTACLES, ATTACHMENT PLUGS, AND SIMILAR WIRING DEVICES
    CSA C22.2 No. 115 : 2014 METER-MOUNTING DEVICES
    CSA C22.2 No. 190 : 2014 CAPACITORS FOR POWER FACTOR CORRECTION
    CSA C22.2 No. 3 : 1988 : R2014 ELECTRICAL FEATURES OF FUEL-BURNING EQUIPMENT
    CSA C22.2 No. 42 : 2010 : R2015 GENERAL USE RECEPTACLES, ATTACHMENT PLUGS, AND SIMILAR WIRING DEVICES
    C22.2 NO. 331-17 Flat cable systems
    CSA C22.2 No. 158 : 2010 : R2014 TERMINAL BLOCKS
    C22.2 NO. 300-18 Portable power equipment
    CSA C22.2 No. 218.1:2013 SPAS, HOT TUBS, AND ASSOCIATED EQUIPMENT
    CSA C22.2 No. 42 : 2010 : INC : UPD 3 : 2017 : R201500 GENERAL USE RECEPTACLES, ATTACHMENT PLUGS, AND SIMILAR WIRING DEVICES
    CSA C22.2 No. 274 : 2017 ADJUSTABLE SPEED DRIVES
    CSA C22.2 No. 61730-1 : 2011 : INC : AMD 2 : 2015 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
    CSA C22.2 No. 115 : 2014 : R 2019 METER-MOUNTING DEVICES
    CSA C22.2 No. 24 : 2015 TEMPERATURE-INDICATING AND -REGULATING EQUIPMENT
    C22.2 NO. 218.1-13 (R2017) Spas, hot tubs and associated equipment
    C22.2 NO. 292-18 Dc arc fault protection for photovoltaic applications
    CSA C22.2 No. 255 : 2004 NEON TRANSFORMERS AND POWER SUPPLIES
    CSA E60127.6 : 2003 : R2012 MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE CARTRIDGE FUSE-LINKS
    CSA C22.2 No. 3 : 1988 : R2004 ELECTRICAL FEATURES OF FUEL-BURNING EQUIPMENT
    CSA E60127.6 : 2003 MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE CARTRIDGE FUSE-LINKS
    CAN/CSA-E60127-6-03 (R2017) Miniature Fuses - Part 6: Fuse-Holders for Miniature Cartridge Fuse-Links (Adopted CEI/IEC 127-6:1994, first edition, 1994-04, including Amendment 1:1996, with Canadian deviations) | Coupe-circuit miniatures - Partie 6: Ensembles-porteurs pour cartouches de coupe-circuit miniatures (norme CEI/IEC 127-6:1994 adoptée, première édition, 1994-04, y compris l\'Amendement 1:1996, avec exigences propres au Canada)
    CSA C22.2 No. 295 : 2015 NEUTRAL GROUNDING DEVICES
    ANSI Z83.21 : 2016 COMMERCIAL DISHWASHERS
    C22.2 NO. 14-18 Industrial control equipment
    C22.2 NO. 39-13 (R2017) Fuseholder assemblies
    CSA C22.2 No. 63 : 1993 HOUSEHOLD REFRIGERATORS AND FREEZERS
    C22.2 NO. 27-09 (R2017) Busways (Tri-national standard, with UL 857 and NMX-J-148-ANCE)
    CSA C22.2 No. 5 : 2013 MOLDED-CASE CIRCUIT BREAKERS, MOLDED-CASE SWITCHES AND CIRCUIT-BREAKER ENCLOSURES
    CSA C22.2 No. 301 : 2016 INDUSTRIAL ELECTRICAL MACHINERY
    CSA C22.2 No. 37 : 2017 DECORATIVE LIGHTING PRODUCTS
    CSA C22.2 No. 18.1 : 2013 : INC : UPD 1 : 2015 METALLIC OUTLET BOXES
    CSA C22.2 No. 41 :2013 GROUNDING AND BONDING EQUIPMENT
    CSA C22.2 No. 27 : 2009 : INC : UPD 1 : 2011 BUSWAYS
    CSA C22.2 No. 244:2005 SWITCHBOARDS
    CSA C22.2 No. 199 :2007 AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR AUTOMATIC BURNER IGNITION SYSTEMS AND COMPONENTS
    CSA C22.2 No. 18.1 : 2013 : INC : UPD 2 : 2017 METALLIC OUTLET BOXES
    CSA C22.2 No. 27 :2009 BUSWAYS
    C22.2 NO. 243-17 Vacuum cleaners, blower cleaners, and household floor finishing machines (Binational standard with UL 1017)
    CSA C22.2 No. 169 : 2015 ELECTRIC CLOTHES WASHING MACHINES AND EXTRACTORS
    C22.2 NO. 236-15 Heating and cooling equipment (Bi-national standard with UL 1995)
    CSA C22.2 No. 254 : 2005(R2015) MOTOR CONTROL CENTRES
    CSA C22.2 No. 27 : 2009 : R2013 BUSWAYS
    C22.2 NO. 18.1-13 (R2018) Metallic outlet boxes (Tri-national standard, with UL 514A and ANCE NMX- J-023/1)
    CSA C22.2 No. 244 : 2005 : INC : UPD 1 : 2012 : R201000 SWITCHBOARDS
    CSA C22.2 No. 167 : 2017 HOUSEHOLD DISHWASHERS
    CSA C22.2 No. 199 : 2007 : INC : ADD A : 2010 AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR AUTOMATIC BURNER IGNITION SYSTEMS AND COMPONENTS
    CSA C22.2 No. 199 : 2007 : R2011 AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR AUTOMATIC BURNER IGNITION SYSTEMS AND COMPONENTS
    CSA C22.2 No. 63 : 1993 : R2013 HOUSEHOLD REFRIGERATORS AND FREEZERS
    CSA C22.2 No. 199 : 2007 : INC : ADD A : 2010 : R2012 AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR AUTOMATIC BURNER IGNITION SYSTEMS AND COMPONENTS
    C22.2 NO. 41-13 (R2017) Grounding and bonding equipment (Tri-national standard, with NMX-J-590- ANCE and UL 467)
    CSA C22.2 No. 63 : 1993 : INC : UPD 6 : 2012 : R200800 HOUSEHOLD REFRIGERATORS AND FREEZERS
    CSA C22.2 No. 61730-2 :2011 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING
    CSA C22.2 No. 61730-2 : 2011 : INC : AMD 1 : 2013 : R2016 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING
    CSA C22.2 No. 18.1 : 2013 METALLIC OUTLET BOXES
    CSA C22.2 No. 244 : 2005 : R2010 SWITCHBOARDS
    CSA C22.2 No. 21 : 2014 CORD SETS AND POWER-SUPPLY CORDS
    CAN/CSA-C22.2 NO. 60947-7-1:17 Low-voltage switchgear and controlgear ? Part 7-1: Ancillary equipment ? Terminal blocks for copper conductors (Trinational standard with NMX-J-538/7-1-ANCE and UL 60947-7-1)
    CSA C22.2 No. 61730-1 : 2011 : INC : UPD 1 : 2013 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
    CSA C22.2 No. 235 : 2004 : R2013 SUPPLEMENTARY PROTECTORS
    CSA C22.2 No. 1691 : 2012 SINGLE POLE LOCKING-TYPE SEPARABLE CONNECTORS
    C22.2 NO. 280-16 Electric vehicle supply equipment (Tri-national standard, with UL 2594 and NMX-J-677-ANCE-2016)
    CSA C22.2 No. 61730-1 : 2011 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
    CSA C22.2 No. 107.3 : 2014 UNINTERRUPTIBLE POWER SYSTEMS
    CSA C22.2 No. 282 : 2013 PLUGS, RECEPTACLES, AND COUPLERS FOR ELECTRIC VEHICLES
    CSA C22.2 No. 158 : 2010 TERMINAL BLOCKS
    C22.2 NO. 2459-08 (R2017) Insulated multi-pole splicing wire connectors (Bi-national standard, with UL 2459)
    CSA C22.2 No. 2459 : 2008 : R2013 INSULATED MULTI-POLE SPLICING WIRE CONNECTORS
    CSA C22.2 No. 293.1 : 2017 SKIN EFFECT TRACE HEATING OF PIPELINES, VESSELS, EQUIPMENT, AND STRUCTURES - GENERAL, TESTING, MARKING, AND DOCUMENTATION REQUIREMENTS
    CSA C22.2 No. 29 : 2015 PANELBOARDS AND ENCLOSED PANELBOARDS
    CSA C22.2 No. 2459 : 2008 : INC : UPD 1 : 2014 : R201300 INSULATED MULTI-POLE SPLICING WIRE CONNECTORS
    CSA C22.2 No. 62282-2 : 2007 : R2013 FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES
    CSA C22.2 No. 203.1 : 2014 MANUFACTURED WIRING SYSTEMS
    CSA C22.2 No. 62282-2 :2007 FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES
    C22.1-15 PACKAGE Consists of C22.1-15, Canadian electrical code, part I (23rd edition), safety standard for electrical installations; C22.1HB-15, Canadian electrical code handbook - an explanation of rules of the Canadian electrical code, part I and the 2015 Electrical quick reference
    CSA C22.2 NO. 182.5:14 (R2019) Photovoltaic connectors
    CSA C22.2 No. 46 : 2013 ELECTRIC AIR HEATERS
    CSA C22.2 No. 39 : 2013 FUSEHOLDER ASSEMBLIES
    CSA C22.2 No. 5 PT1 : 1991 MOULDED CASE CIRCUIT BREAKERS
    CSA C22.2 NO No. 51:14 (R2018) ARMOURED CABLES
    CSA C22.2 NO No. 298 : 2016 HIGH VOLTAGE COUPLERS
    CSA C22.2 No. 250.13 : 2017 LIGHT EMITTING DIODE (LED) EQUIPMENT FOR LIGHTING APPLICATIONS
    CSA C22.2 No. 139 : 2013 ELECTRICALLY OPERATED VALVES
    CSA C22.2 NO. 76:14 (R2019) Splitters
    CSA C22.2 No. 61730-1 : 2011 : INC : AMD 2 : 2015 : R2016 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
    CSA C22.2 No. 218.2 : 2015 HYDROMASSAGE BATHTUB APPLIANCES
    CSA C22.2 No. 61 : 2016 HOUSEHOLD COOKING RANGES
    CSA C22.2 No. 18 : 0 OUTLET BOXES, CONDUIT BOXES, FITTINGS AND ASSOCIATED HARDWARE
    CSA C22.2 No. 235 :2004 SUPPLEMENTARY PROTECTORS
    CSA C22.2 No. 255 : 2004 : R2014 NEON TRANSFORMERS AND POWER SUPPLIES
    CSA C22.2 No. 139 : 2013 : R2018 ELECTRICALLY OPERATED VALVES
    CSA C22.2 No. 49 : 2014 FLEXIBLE CORDS AND CABLES
    CSA C22.2 No. 61730-1 : 2011 : INC : AMD 1 : 2013 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
    SAE J 2698 : 2014 PRIMARY SINGLE PHASE NOMINAL 120 VAC WIRING DISTRIBUTION ASSEMBLY DESIGN - TRUCK AND BUS
    C22.2 NO. 182.1-17 Plugs, receptacles, and cable connectors of the pin and sleeve type (Trinational standard with NMX-J-719-ANCE and UL 1682)
    CSA C22.2 No. 178.1 : 2014 TRANSFER SWITCH EQUIPMENT
    CSA C22.2 No. 2459 : 2008 INSULATED MULTI-POLE SPLICING WIRE CONNECTORS
    CSA C22.2 No. 5 PT2 : 1990 MOULDED CASE SWITCHES
    CSA C22.2 No. 290 : 2015 PHOTOVOLTAIC COMBINERS
    CSA C22.2 No. 182.3 : 2016 SPECIAL USE ATTACHMENT PLUGS, RECEPTACLES, AND CONNECTORS
    CSA C22.2 No. 61730-2 : 2011 : INC : UPD 1 : 2013 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING
    CSA C22.2 No. 61730-2 : 2011 : INC : AMD 1 : 2013 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING
    CSA C22.2 No. 168 : 2016 COMMERCIAL DISHWASHERS
    CSA C22.2 No. 60320-1 : 2011 : R2016 APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 1: GENERAL REQUIREMENTS
    IEEE 844.1 : 2017 SKIN EFFECT TRACE HEATING OF PIPELINES, VESSELS, EQUIPMENT, AND STRUCTURES - GENERAL, TESTING, MARKING, AND DOCUMENTATION REQUIREMENTS
    C22.1-18 Canadian Electrical Code, Part I (24th Edition), Safety Standard for Electrical Installations
    CSA C22.2 No. 60745.1 : 2007 : INC : UPD 2 : 2011 : FR HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
    CSA C22.2 No. 60745.1 : 2007 : INC : UPD 3 : 2013 : R201200 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
    CSA C22.2 No. 60745.1 : 2007 : R2012 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
    CAN/CSA-C22.2 No. 62841-1 : 2015 ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
    CSA C22.2 No. 60745.1 : 2007 : INC : UPD 2 : 2011 : R2012 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
    CSA C22.2 No. 60745.1 : 2007 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
    UL 20 : 2013 GENERAL-USE SNAP SWITCHES
    UL 1008A : 2 TRANSFER SWITCH EQUIPMENT, OVER 1000 VOLTS
    CSA C22.2 No. 60745.1 : 2007 : INC : UPD 2 : 2011 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
    CSA C22.2 No. 60745.1 : 2007 (R2017) HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
    CSA C22.2 NO. 178.3:17 Transfer switch equipment, over 1000 volts (Binational standard with UL 1008A)
    CSA C22.2 No. 144.1 : 2016 GROUND-FAULT CIRCUIT-INTERRUPTERS
    CSA C22.2 No. 66.1 : 2006 : INC : UPD 2 : 2013 : R201100 LOW VOLTAGE TRANSFORMERS - PART 1: GENERAL REQUIREMENTS
    CSA C22.2 No. 198.2 : 2005 SEALED WIRE CONNECTOR SYSTEMS
    CSA C22.2 No. 198.2 : 2005 : R2015 SEALED WIRE CONNECTOR SYSTEMS
    CSA C22.2 No. 112 : 2015 ELECTRIC CLOTHES DRYERS
    UL 1995 : 5 HEATING AND COOLING EQUIPMENT
    UL 1682 : 5 PLUGS, RECEPTACLES, AND CABLE CONNECTORS OF THE PIN AND SLEEVE TYPE
    CSA C22.2 No. 198.2 : 2005 : R2010 SEALED WIRE CONNECTOR SYSTEMS
    UL 921 : 7 COMMERCIAL DISHWASHERS
    UL 489B : 4 MOLDED-CASE CIRCUIT BREAKERS, MOLDED-CASE SWITCHES, AND CIRCUIT-BREAKER ENCLOSURES FOR USE WITH PHOTOVOLTAIC (PV) SYSTEMS
    UL 60947-7-1 : 4 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 7-1: ANCILLARY EQUIPMENT - TERMINAL BLOCKS FOR COPPER CONDUCTORS
    CSA C22.2 No. 60335-1:2011 SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 1: GENERAL REQUIREMENTS
    CSA C22.2 No. 66.1 : 2006 : INC : UPD 1 : 2012 : R201100 LOW VOLTAGE TRANSFORMERS - PART 1: GENERAL REQUIREMENTS
    CSA C22.2 No. 272 : 2014 WIND TURBINE ELECTRICAL SYSTEMS
    CSA C22 NO. 4 : 2016 ENCLOSED AND DEAD-FRONT SWITCHES
    UL 98 : 2016 ENCLOSED AND DEAD-FRONT SWITCHES
    UL 4248-1 : 2 FUSEHOLDERS - PART 1: GENERAL REQUIREMENTS
    UL 1472:2ED 2015-09 Solid-State Dimming Controls
    UL 943 : 5 GROUND-FAULT CIRCUIT-INTERRUPTERS
    UL 1778 : 5ED 2014-06 UNINTERRUPTIBLE POWER SYSTEMS
    CSA C22.2 No. 263 : 2015 FIRE PUMP CONTROLLERS
    CSA C22.2 No. 66.1 : 2006 : R2011 LOW VOLTAGE TRANSFORMERS - PART 1: GENERAL REQUIREMENTS
    UL 514A:11ED 2013-02 Metallic Outlet Boxes
    UL 60320-1 : 2 APPLIANCES COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 1: GENERAL REQUIREMENTS
    UL 749 : 2017 HOUSEHOLD DISHWASHERS
    CSA C22.2 No. 305 : 2016 MOLDED-CASE CIRCUIT BREAKERS, MOLDED-CASE SWITCHES, AND CIRCUIT-BREAKER ENCLOSURES FOR USE WITH PHOTOVOLTAIC (PV) SYSTEMS
    UL 467 : 2013 GROUNDING AND BONDING EQUIPMENT
    UL 2594 : 3 ELECTRIC VEHICLE SUPPLY EQUIPMENT
    CAN/CSA-C22.2 NO. 60335-1:11 (R2016) Safety of household and similar appliances - Part 1: General requirements (Tri-national standard, with NMX-J-521/1-ANCE and UL 60335-1)
    CSA C22.2 No. 66.1 : 2006 LOW VOLTAGE TRANSFORMERS - PART 1: GENERAL REQUIREMENTS
    UL 60335-1 : 6ED 2016-10 SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 1: GENERAL REQUIREMENTS
    CSA C22.2 No. 66.1 : 2006 : R2015 LOW VOLTAGE TRANSFORMERS - PART 1: GENERAL REQUIREMENTS
    UL 347 : 6 MEDIUM-VOLTAGE AC CONTACTORS, CONTROLLERS, AND CONTROL CENTRES
    UL 1017 : 2010 VACUUM CLEANERS, BLOWER CLEANERS, AND HOUSEHOLD FLOOR FINISHING MACHINES
    UL 489 : 2013 MOLDED-CASE CIRCUIT BREAKERS, MOLDED-CASE SWITCHES, AND CIRCUIT-BREAKER ENCLOSURES
    C22.2 NO. 4248.1-17 Fuseholders Part 1: General requirements (Trinational standard with UL 4248-1 and NMX-J-009/4248/1-ANCE)
    CSA C22.2 No. 184.1 : 2015 SOLID-STATE DIMMING CONTROLS
    UL 1008 : 8 TRANSFER SWITCH EQUIPMENT
    UL 2459 : 1 INSULATED MULTI-POLE SPLICING WIRE CONNECTORS
    CSA C22.2 No. 111 : 2010 : R2015 GENERAL-USE SNAP SWITCHES
    C22.1HB-18 Canadian Electrical Code Handbook - An Explanation of the Rules of the Canadian Electrical Code, Part I
    CSA C22.2 No.111 : 2010 GENERAL-USE SNAP SWITCHES
    CSA C22.2 No. 111 : 2010 : INC : UPD 1 : 2012 GENERAL-USE SNAP SWITCHES
    CSA C22.2 No. 253 : 2016 MEDIUM-VOLTAGE AC CONTACTORS, CONTROLLERS, AND CONTROL CENTRES
    CSA CE CODE SAFETY PACKAGE : 2012 CE CODE SAFETY PACKAGE

    Standards Referencing This Book - (Show below) - (Hide below)

    CSA C22.2 No. 38 : 2014 THERMOSET-INSULATED WIRES AND CABLES
    IEC 60228:2004 Conductors of insulated cables
    ASTM B 154 : 2016 : REDLINE Standard Test Method for Mercurous Nitrate Test for Copper Alloys
    ASTM B 174 : 2017 : REDLINE Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors
    C22.1-15 Canadian Electrical Code, Part I (23rd Edition), Safety Standard for Electrical Installations
    UL 94 : 6 TESTS FOR FLAMMABILITY OF PLASTIC MATERIALS FOR PARTS IN DEVICES AND APPLIANCES
    ASTM D 5374 : 2013 : REDLINE Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
    CSA C22.2 No. 17 : 1973 CABLE FOR LUMINOUS-TUBE SIGNS AND FOR OIL AND GAS-BURNER IGNITION EQUIPMENT
    ASTM D 5207 : 2014 : REDLINE Standard Practice for Confirmation of 20–mm (50–W) and 125–mm (500–W) Test Flames for Small-Scale Burning Tests on Plastic Materials
    UL 746C : 6 POLYMERIC MATERIALS - USE IN ELECTRICAL EQUIPMENT EVALUATIONS
    ASTM B 172 : 2017 : REDLINE Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors
    ASTM B 231/B231M : 2016 : REDLINE Standard Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors
    ASTM B 496 : 2016 : REDLINE Standard Specification for Compact Round Concentric-Lay-Stranded Copper Conductors
    NFPA 70 : 2017 NATIONAL ELECTRICAL CODE
    C22.2 NO. 75-17 Thermoplastic insulated wires and cables (Trinational standard with UL 83 and NMX-J-010-ANCE-2017)
    ASTM B 173 : 2017 : REDLINE Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors
    ASTM D 5423 : 2014 Standard Specification for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective