IEC 61537:2006
|
Cable management - Cable tray systems and cable ladder systems |
IEC 60603-7-1:2011
|
Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors |
IEC 60512-25-4:2001
|
Connectors for electronic equipment - Tests and measurements - Part 25-4: Test 25d - Propagation delay |
IEC 60512-23-7:2005
|
Connectors for electronic equipment - Tests and measurements - Part 23-7: Screening and filtering tests - Test 23g: Effective transfer impedance of connectors |
IEC 60364-5-54:2011
|
Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors |
IEC 60352-3:1993
|
Solderless connections - Part 3: Solderless accessible insulation displacement connections - General requirements, test methods and practical guidance |
IEC 60874-19-2:1999
|
Connectors for optical fibres and cables - Part 19-2: Fibre optic adaptor (duplex) type SC for single-mode fibre connectors - Detail specification |
IEC 60352-6:1997
|
Solderless connections - Part 6: Insulation piercing connections - General requirements, test methods and practical guidance |
IEC 60189-1:2007
|
Low-frequency cables and wires with PVC insulation and PVC sheath - Part 1: General test and measuring methods |
IEC 60364-4-41:2005+AMD1:2017 CSV
|
Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock |
IEC 60603-7-2:2010
|
Connectors for electronic equipment - Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz |
IEC 60966-2-6:2016
|
Radio frequency and coaxial cable assemblies - Part 2-6: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-24 connectors |
IEC 60050-151:2001
|
International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices |
IEC 60332-1:1993
|
Tests on electric cables under fire conditions - Part 1: Test on a single vertical insulated wire or cable |
ISO/IEC 11801:2002
|
Information technology Generic cabling for customer premises |
IEC 60966-1:1999
|
Radio frequency and coaxial cable assemblies - Part 1: Generic specification - General requirements and test methods |
IEC TR 61000-5-2:1997
|
Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 2: Earthing and cabling |
IEC 61169-24:2009
|
Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 Ω cable networks (type F) |
IEC 60364-1:2005
|
Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions |
IEC 60227-1:2007
|
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements |
IEC 61169-1:2013
|
Radio frequency connectors - Part 1: Generic specification - General requirements and measuring methods |
IEC 60874-19-1:2007
|
Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 19-1: Fibre optic patch cord connector type SC-PC (floating duplex) standard terminated on multimode fibre type A1a, A1b - Detail specification |
CISPR 22:2008
|
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement |
IEC 62255-1:2003
|
Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 1: Generic specification |
IEC 60512-25-1:2001
|
Connectors for electronic equipment - Tests and measurements - Part 25-1: Test 25a - Crosstalk ratio |
ISO/IEC 18010:2002
|
Information technology Pathways and spaces for customer premises cabling |
ISO/IEC 14763-1:1999
|
Information technology Implementation and operation of customer premises cabling Part 1: Administration |
IEC 61156-2:2010
|
Multicore and symmetrical pair/quad cables for digital communications - Part 2: Symmetrical pair/quad cables with transmission characteristics up to 100 MHz - Horizontal floor wiring - Sectional specification |
IEC 60603-7-3:2010
|
Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 100 MHz |
IEC 61084-1:2017
|
Cable trunking systems and cable ducting systems for electrical installations - Part 1: General requirements |
IEC 60603-7:2008+AMD1:2011 CSV
|
Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors |
IEC 60364-4-44:2007+AMD1:2015 CSV
|
Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances |
IEC 60512-25-2:2002
|
Connectors for electronic equipment - Tests and measurements - Part 25-2: Test 25b - Attenuation (insertion loss) |
IEC 60966-2-5:2016
|
Radio frequency and coaxial cable assemblies - Part 2-5: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 1 000 MHz, IEC 61169-2 connectors |
IEC 61935-1:2015
|
Specification for the testing of balanced and coaxial information technology cabling - Part 1: Installed balanced cabling as specified in ISO/IEC 11801 and related standards |
IEC 60874-19-3:2007
|
Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 19-3: Fibre optic adaptor (duplex) type SC for multimode fibre connectors - Detail specification |
IEC 61156-1:2007+AMD1:2009 CSV
|
Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification |
IEC 60512-25-5:2004
|
Connectors for electronic equipment - Tests and measurements - Part 25-5: Test 25e - Return loss |
IEC 60966-2-4:2016
|
Radio frequency and coaxial cable assemblies - Part 2-4: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-2 connectors |
IEC 60603-8:1990
|
Connectors for frequencies below 3 MHz for use with printed boards. Part 8: Two-part connectors for printed boards, for basic grid of 2.54 mm (0.1 in), with square male contacts of 0.63 mm x 0.63 mm |
IEC 60189-2:2007
|
Low-frequency cables and wires with PVC insulation and PVC sheath - Part 2: Cables in pairs, triples, quads and quintuples for inside installations |
IEC 61156-7:2003+AMD1:2012 CSV
|
Multicore and symmetrical pair/quad cables for digital communications - Part 7: Symmetrical pair cables with transmissioncharacteristics up to 1 200 MHz - Sectional specification fordigital and analog communication cables |
IEC 61156-6:2010+AMD1:2012 CSV
|
Multicore and symmetrical pair/quad cables for digital communications - Part 6: Symmetrical pair/quad cables withtransmission characteristics up to 1 000 MHz - Work area wiring -Sectional specification |
IEC 61156-5:2009+AMD1:2012 CSV
|
Multicore and symmetrical pair/quad cables for digital communications - Part 5: Symmetrical pair/quad cables withtransmission characteristics up to 1 000 MHz - Horizontal floorwiring - Sectional specification |
IEC 61196-1:2005
|
Coaxial communication cables - Part 1: Generic specification - General, definitions and requirements |
IEC 61935-2:2010
|
Specification for the testing of balanced and coaxial information technology cabling - Part 2: Cords as specified in ISO/IEC 11801 and related standards |
IEC 61156-4:2009
|
Multicore and symmetrical pair/quad cables for digital communications - Part 4: Riser cables - Sectional specification |
IEC 60603-7-5:2010
|
Connectors for electronic equipment - Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz |
ISO/IEC TR 15044:2000
|
Information technology Terminology for the Home Electronic System (HES) |
IEC 61156-3:2008
|
Multicore and symmetrical pair/quad cables for digital communications - Part 3: Work area cable - Sectional specification |
IEC 61140:2016
|
Protection against electric shock - Common aspects for installation and equipment |
IEC 60603-7-7:2010
|
Connectors for electronic equipment - Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz |
IEC 61076-3-104:2017
|
Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz |
EN 50289-1-14:2004
|
Communication cables - Specifications for test methods - Part 1-14: Electrical test methods - Coupling attenuation or screening attenuation of connecting hardware |
IEC 60728-1:2014
|
Cable networks for television signals, sound signals and interactive services - Part 1: System performance of forward paths |
IEC 60512-3:1976
|
Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 3: Current-carrying capacity tests |
CISPR 24:2010+AMD1:2015 CSV
|
Information technology equipment - Immunity characteristics - Limitsand methods of measurement |
IEC 61169-2:2007
|
Radio-frenquency connectors - Part 2: Sectional specification - Radio frequency coaxial connectors of type 9,52 |
IEC TR 61000-5-1:1996
|
Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 1: General considerations - Basic EMC publication |
IEC 60364-5-52:2009
|
Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems |
IEC 60603-7-4:2010
|
Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz |