Skip to content
Please enter a keyword to search

  • DIN 50930-6 E : 2013

    Current The latest, up-to-date edition.

    CORROSION OF METALS - CORROSION OF METALLIC MATERIALS UNDER CORROSION LOAD BY WATER INSIDE OF PIPES, TANKS AND APPARATUS - PART 6: EVALUATION PROCESS AND REQUIREMENTS REGARDING THE HYGIENIC SUITABILITY IN CONTACT WITH DRINKING WATER

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  01-01-2013

    Publisher:  German Institute for Standardisation (Deutsches Institut für Normung)

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    Introduction
    1 Scope
    2 Normative references
    3 Terms and definitions, symbols and abbreviations
    4 Material and product testing
    5 Material testing
    6 Areas of application
    7 Protective measures
    Annex A (informative) - Specification of alloy
            components and unavoidable impurities in
            reference materials and materials of a category
            to be tested according to DIN EN 15664-1
    Bibliography

    Abstract - (Show below) - (Hide below)

    Specifies hygienic requirements for metallic materials.

    General Product Information - (Show below) - (Hide below)

    Document Type Standard
    Publisher German Institute for Standardisation (Deutsches Institut für Normung)
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    DIN 1988-7 E : 1988 DRINKING WATER SUPPLY SYSTEMS - PART 7: PREVENTION OF CORROSION AND SCALING - (DVGW CODE OF PRACTICE)
    DIN 18381:2016-09 GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - INSTALLATION OF GAS, WATER AND DRAINAGE PIPEWORK INSIDE BUILDINGS
    DIN 2001-2:2009-04 DRINKING WATER SUPPLY FROM SMALL UNITS AND NON STATIONARY UNITS - PART 2: NON STATIONARY UNITS - GUIDELINES FOR DRINKING WATER, PLANNING, CONSTRUCTION, OPERATION ANDMAINTENANCE OF UNITS - TECHNICAL RULE OF THE DVGW
    DIN 1988-7:1988-12 DRINKING WATER SUPPLY SYSTEMS - PART 7: PREVENTION OF CORROSION AND SCALING - (DVGW CODE OF PRACTICE)
    DIN 2001-2:2009-04 DRINKING WATER SUPPLY FROM SMALL UNITS AND NON STATIONARY UNITS - PART 2: NON STATIONARY UNITS - GUIDELINES FOR DRINKING WATER, PLANNING, CONSTRUCTION, OPERATION ANDMAINTENANCE OF UNITS - TECHNICAL RULE OF THE DVGW

    Standards Referencing This Book - (Show below) - (Hide below)

    DIN 4046:1983-09 WATER-SUPPLY - TERMS - DVGW CODE OF PRACTICE
    DIN 38406-14 E : 1992 GERMAN STANDARD METHODS FOR THE EXAMINATION OF WATER, WASTE WATER AND SLUDGE; CATIONS (GROUP E); DETERMINATION OF SODIUM BY ATOMIC ABSORPTION SPECTROMETRY (ASS) USING AN AIR-ACETYLENE FLAME (E 14)
    DIN 38405-9:2011-09 German standard methods for examination of water, waste water and sludge - Anions (group D) - Part 9: Spectrometric determination of nitrate (D 9)
    DIN 38405-21 E : 1990 GERMAN STANDARD METHODS FOR THE EXAMINATION OF WATER, WASTE WATER AND SLUDGE; ANIONS (GROUP D); DETERMINATION OF DISSOLVED SILICATE BY SPECTROMETRY (D 21)
    DIN EN 14812 E : 2007 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - CHEMICAL DOSING SYSTEMS - PRE-SET DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
    DVGW GW 6 : 2014 LOET-, UEBERGANGS- UND GEWINDEFITTINGS AUS KUPFER UND KUPFERLEGIERUNGEN IN DER GAS- UND TRINKWASSER-INSTALLATION; ANFORDERUNGEN UND PRUEFUNGEN
    DIN EN ISO 9453 E : 2014 SOFT SOLDER ALLOYS - CHEMICAL COMPOSITIONS AND FORMS (ISO 9453:2014)
    DVGW W 617 : 2006
    DIN EN 12502-5 E : 2005 PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN WATER DISTRIBUTION AND STORAGE SYSTEMS - PART 5: INFLUENCING FACTORS FOR CAST IRON, UNALLOYED AND LOW-ALLOY STEELS
    DIN 19635-100:2008-02 DOSING SYSTEMS FOR DRINKING WATER INSTALLATION - PART 100: REQUIREMENTS FOR APPLICATION OF CHEMICAL DOSING SYSTEMS IN ACCORDANCE WITH DIN EN 14812
    DVGW W 534 : 2015 ROHRVERBINDER UND ROHRVERBINDUNGEN IN DER TRINKWASSER-INSTALLATION
    DVGW GW 541 : 2004 ROHRE AUS NICHTROSTENDEN STAEHLEN FUER DIE GAS- UND TRINKWASSER-INSTALLATION - ANFORDERUNGEN UND PRUEFUNGEN
    DIN EN 12502-1 E : 2005 PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN WATER DISTRIBUTION AND STORAGE SYSTEMS - PART 1: GENERAL
    DIN EN ISO 8044:2015-12 CORROSION OF METALS AND ALLOYS - BASIC TERMS AND DEFINITIONS (ISO 8044:2015)
    DIN 2001-1:2007-05 DRINKING WATER SUPPLY FROM SMALL UNITS AND NON STATIONARY PLANTS - PART 1: SMALL UNITS - GUIDELINES FOR DRINKING WATER, PLANNING, CONSTRUCTION, OPERATION AND MAINTENANCE OF PLANTS - TECHNICAL RULE OF THE DVGW
    DIN 38406-13 E : 1992 GERMAN STANDARD METHODS FOR THE EXAMINATION OF WATER, WASTE WATER AND SLUDGE; CATIONS (GROUP E); DETERMINATION OF POTASSIUM BY ATOMIC ABSORPTION SPECTROMETRY (AAS) USING AN AIR-ACETYLENE FLAME (E 13)
    DVGW GW 392 : 2009 SEAMLESS COPPER PIPES FOR GAS AND WATER INSTALLATIONS; SPECIFICATIONS AND TESTING REQUIREMENTS
    DVGW W 216 : 2004 SUPPLY OF VARIOUS WATERS
    DIN 1707-100:2011-09 SOFT SOLDER ALLOYS - CHEMICAL COMPOSITION AND FORMS ADDITIONAL TO DIN EN ISO 9453:2014-12
    DVGW GW 2 : 2012 ASSEMBLAGE DE TUBES CUIVRE POUR INSTALLATIONS DE GAZ ET D'EAU A L'INTERIEUR DE TERRAINS ET DE BATIMENTS
    DIN EN 12502-4 E : 2005 PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN WATER DISTRIBUTION AND STORAGE SYSTEMS - PART 4: INFLUENCING FACTORS FOR STAINLESS STEELS
    DIN EN 12502-3 E : 2005 PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN WATER DISTRIBUTION AND STORAGE SYSTEMS - PART 3: INFLUENCING FACTORS FOR HOT-DIP GALVANISED FERROUS MATERIALS
    DIN CEN/TS 13388;DIN SPEC 9700:2015-08 COPPER AND COPPER ALLOYS - COMPENDIUM OF COMPOSITIONS AND PRODUCTS
    DVGW GW 8 : 2014 KAPILLARLOETFITTINGS AUS KUPFER IN DER GAS- UND TRINKWASSER-INSTALLATION; ANFORDERUNGEN UND PRUEFUNGEN
    DIN EN 12502-2 E : 2005 PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN WATER DISTRIBUTION AND STORAGE SYSTEMS - PART 2: INFLUENCING FACTORS FOR COPPER AND COPPER ALLOYS
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective